IDL API Master Index

S

SFEEndCut property in object EndCutESSObjectSettingAtt
SHMStdProfPath property in object CatalogSHMObjectSettingAtt: Returns or sets the SHMStdProfPath setting parameter value.
SHMViewFDBeadBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDBeadBTLFeat setting parameter value.
SHMViewFDCircStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDCircStampBTLFeat setting parameter value.
SHMViewFDCurveStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDCurveStampBTLFeat setting parameter value.
SHMViewFDFlgCutBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDFlgCutBTLFeat setting parameter value.
SHMViewFDFlgCutIML property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDFlgCutIML setting parameter value.
SHMViewFDFlgCutOML property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDFlgCutOML setting parameter value.
SHMViewFDFlgHoleBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDFlgHoleBTLFeat setting parameter value.
SHMViewFDFlgHoleIML property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDFlgHoleIML setting parameter value.
SHMViewFDFlgHoleOML property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDFlgHoleOML setting parameter value.
SHMViewFDOtherStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDOtherStampBTLFeat setting parameter value.
SHMViewFDStiffStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDStiffStampBTLFeat setting parameter value.
SHMViewFDSurfFlgBTLFeatBF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDSurfFlgBTLFeatBF setting parameter value.
SHMViewFDSurfFlgBTLFeatHF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDSurfFlgBTLFeatHF setting parameter value.
SHMViewFDSurfFlgBTLSuppBF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDSurfFlgBTLSuppBF setting parameter value.
SHMViewFDSurfFlgBTLSuppHF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDSurfFlgBTLSuppHF setting parameter value.
SHMViewFDSurfFlgIMLBF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDSurfFlgIMLBF setting parameter value.
SHMViewFDSurfFlgIMLHF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDSurfFlgIMLHF setting parameter value.
SHMViewFDSurfFlgOMLBF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDSurfFlgOMLBF setting parameter value.
SHMViewFDSurfFlgOMLHF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDSurfFlgOMLHF setting parameter value.
SHMViewFDSurfStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDSurfStampBTLFeat setting parameter value.
SHMViewFDUserStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFDUserStampBTLFeat setting parameter value.
SHMViewFPBeadBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPBeadBTLFeat setting parameter value.
SHMViewFPCircStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPCircStampBTLFeat setting parameter value.
SHMViewFPCurveStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPCurveStampBTLFeat setting parameter value.
SHMViewFPFlgCutBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPFlgCutBTLFeat setting parameter value.
SHMViewFPFlgCutIML property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPFlgCutIML setting parameter value.
SHMViewFPFlgCutOML property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPFlgCutOML setting parameter value.
SHMViewFPFlgHoleBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPFlgHoleBTLFeat setting parameter value.
SHMViewFPFlgHoleIML property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPFlgHoleIML setting parameter value.
SHMViewFPFlgHoleOML property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPFlgHoleOML setting parameter value.
SHMViewFPOtherStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPOtherStampBTLFeat setting parameter value.
SHMViewFPStiffStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPStiffStampBTLFeat setting parameter value.
SHMViewFPSurfFlgBTLFeatBF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgBTLFeatBF setting parameter value.
SHMViewFPSurfFlgBTLFeatHF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgBTLFeatHF setting parameter value.
SHMViewFPSurfFlgBTLSuppBF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgBTLSuppBF setting parameter value.
SHMViewFPSurfFlgBTLSuppHF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgBTLSuppHF setting parameter value.
SHMViewFPSurfFlgCLBBF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgCLBBF setting parameter value.
SHMViewFPSurfFlgCLBHF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgCLBHF setting parameter value.
SHMViewFPSurfFlgIMLBF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgIMLBF setting parameter value.
SHMViewFPSurfFlgIMLHF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgIMLHF setting parameter value.
SHMViewFPSurfFlgOML2BF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgOML2BF setting parameter value.
SHMViewFPSurfFlgOML2HF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgOML2HF setting parameter value.
SHMViewFPSurfFlgOMLBF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgOMLBF setting parameter value.
SHMViewFPSurfFlgOMLHF property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfFlgOMLHF setting parameter value.
SHMViewFPSurfStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPSurfStampBTLFeat setting parameter value.
SHMViewFPUserStampBTLFeat property in object ViewCharacteristicCurvesSettingAtt: Returns or sets SHMViewFPUserStampBTLFeat setting parameter value.
SIMArchitectureReqBoolean property in object ABQFrequencyStep: Returns or sets SIM Architecture Request Boolean Value.
SPAWorkbench object: The object to manage all Space Analysis objects.
SPMDistributionMode enum
SVGViewer property in object FASReportingSettingAtt: Gets value of "OLP Robot Program Directory" parameter.
SWKAnthro object: This interface manages the anthropometry of the manikin.
SWKAnthroVariable object: This interface is used to access an anthropometric variable.
SWKBody object: This interface represents the body of the manikin.
SWKBodyElement object: This interface is used to access a body element (segment, ellipse, .
SWKCenterOfGravity object: This interface represents the center of gravity of the manikin.
SWKDOF object: This interface deals with a degree of freedom (DOF) of a manikin.
SWKErgo object: This interface groups the properties giving access to all the ergonomic studies that can be performed on a manikin.
SWKErgoCarry object: This interface deals the carry ergonomic analysis.
SWKErgoLiftLower object: This interface deals the lift/lower ergonomic analysis.
SWKErgoPushPull object: This interface deals the push/pull ergonomic analysis.
SWKErgoRULA object: This interface deals the RULA ergonomic analysis.
SWKIKConstraint object: This interface manages the constraint of the manikin.
SWKIKManager object: This interface represents the IK manager of the manikin.
SWKLineOfSight object: This interface deals with a line of sight of a manikin.
SWKLineOfSightNode object: This interface characterizes a node.
SWKManikin object: This interface groups the methods directly related to the definition of a manikin.
SWKManikinPart object: This interface represents any part of the manikin that is persistent.
SWKNode object: This interface characterizes a node.
SWKPostureSpec enum
SWKSegment object: This interface deals with a segment of a manikin.
SWKSegmentNode object: This interface characterizes a segment node.
SWKVision object: This interface manages the vision of the manikin.
SameDisplay property in object UnitsSheetSettingAtt: Returns or sets the SameDisplay parameter.
Sampled object: The interface to access a CATIASampled based object.
Sampleds object: The collection of all the Sampled objects currently contained in the current document.
SampledsNode object: The interface to access a CATIASampledsNode.
Satisfaction property in object OptimizationConstraint: Returns the constraint satisfaction.
Save method in object Document: Saves the document.
Save method in object StiEngine: Saves the CATIAStiDBItem in SmarTeam.
SaveAs method in object Document: Saves the document with another name.
SaveAsFrozen method in object DMUDataFlow: Saves all documents related to the product in a directory.
SaveAsNewTemplateDirectory property in object AnalysisPostProSettingAtt: Returns or sets the SaveAsNewTemplateDirectory parameter.
SaveAutoIncrement property in object RenderingSettingAtt: Returns or sets the SaveAutoIncrement parameter.
SaveCGR property in object DMUTolSettingAtt: Returns or sets the Save in CGR setting parameter value.
SaveControlFlowInPROMode property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the SaveControlFlowInPROMode attribute.
SaveCoorsysInCgr property in object MultiCADSettingAtt
SaveEdition method in object DrawingView: Saves the Sketch Edition.
SaveEdition method in object Layout2DView: Saves the Sketch Edition.
SaveFinalPosture method in object SWKErgoLiftLower: Saves the current posture of the mankin as the final posture for the lift/lower analysis.
SaveInCGR property in object FTAInfraSettingAtt: Returns or sets the Save In CGR setting parameter value.
SaveInitialPosture method in object SWKErgoLiftLower: Saves the current posture of the mankin as the initial posture for the lift/lower analysis.
SaveInitialState method in object SimulationInitState: Saves initial state attributes for all objects in the current document.
SaveInitialStateList method in object SimulationInitState: Saves initial state attributes for the objects in the given list.
SavePPRNoDetailing property in object MfgHubSettingAtt: Returns (or sets, if not initialized) the SavePPRNoDetailing parameter.
SaveRelationToUnExposedPart property in object MfgHubSettingAtt: Returns (or sets, if not initialized) the SaveRelationToUnExposedPart parameter.
SaveRepository method in object SettingController: Makes a persistent copy of the setting attribute values on file.
SaveRepositoryForUnits method in object UnitsSheetSettingAtt: Implements a function from an interface.
SaveShowEffctvtPanel property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the SaveShowEffctvtPanel parameter.
SaveToPPRHub method in object MHISaveAccess
SaveV5CalcTime property in object MfgHubSettingAtt: Returns (or sets, if not initialized) the SaveV5CalcTime parameter.
Saved property in object Document: Returns whether the document has been modified, and thus needs to be saved.
Scale property in object DrawingView: Returns or sets the scale of the drawing view.
Scale property in object DrawingSheet: Returns or sets the scale of the drawing sheet.
Scale property in object ABQIAABQBaseMotionVB
Scale method in object SchMovable: Scale a schematic object with a scale factor.
Scale method in object SchRouteSymbol: Scale the symbol.
Scale property in object ABQIAABQFrequencyLoadingVB
Scale method in object SchAnnotationBreak: Scale the symbol.
Scale2 property in object DrawingView: Returns or sets the scale of the drawing view (Workaround for VBA keyword).
Scale2 property in object DrawingSheet: Returns or sets the scale of the drawing sheet (Workaround for VBA keyword).
Scale2 property in object DrawingComponent: Returns or sets the scale of the drawing component instance (Workaround for VBA keyword).
ScaleFactor property in object ABQMassScaling: Sets or returns the scale factor.
ScaleFactorOn property in object ABQMassScaling: Sets or returns whether the scale factor is active.
ScaleOnExtremities property in object DrawingArrow: Returns or sets the scale on extremities mode.
ScaleSelectedObjects method in object SchMovable: Scale a list of schematic objects with a scale factor.
ScaleType property in object ABQIAABQSteadyStateLinDynStepBasicVB: Returns or sets Scale Type.
ScaleU property in object RenderingMaterial: Returns or sets the texture scale along U axis.
ScaleU property in object RenderingEnvironmentWall: Returns or sets the texture scale along the U axis.
ScaleV property in object RenderingMaterial: Returns or sets the texture scale along V axis.
ScaleV property in object RenderingEnvironmentWall: Returns or sets the texture scale along the V axis.
Scaling object: Represents the scaling shape.
Scaling property in object Sampled: Returns or sets the Sampled object.
Scaling property in object HybridShapeLawDistProj: Returns or sets the scaling ratio of the law.
Scaling1To1 property in object PageSetup: Returns or sets whether the document or the image should be printed with a zoom factor equals to 1 and the image to print lower left corner on the paper lower corner.
Scaling2 object: Represents the Scaling2 feature object.
ScalingReference property in object Scaling: Returns or sets the scaling reference element.
Scene object: Represent the scene.
SceneProductData object: The interface to access a CATIASceneProduct Using this prefered syntax will enable mkdoc to document your class.
SceneWorkbench object: Represent the access point to scenes management.
Scenes object: A collection of scenes contained in a given ProductDocument.
SchAnnotationBreak object: Manage an annotation break operations.
SchApp2DZoneFrom3DZone object: Manage a 2D zone that is dropped off from 3D counterpart.
SchAppClass object: Manage the class hierarchy of an application model.
SchAppCntrColor object: Manage graphical representation of schematic connector.
SchAppCntrData object: Manage a schematic connector data.
SchAppCntrDocLink object: Manage a schematic connector.
SchAppCntrFlow object: Manage the technical attributes of a schematic connector.
SchAppCntrName object: Manage a schematic connector.
SchAppCntrShow object: Manage graphical representation of schematic connector.
SchAppCompatible object: Provide application rules of how to connect objects.
SchAppComponent object: Represents an application component object.
SchAppConnectable object: Represents an application object that can be connected to others.
SchAppConnection object: Manage a schematic connection.
SchAppConnector object: Manage a schematic connector.
SchAppDeleteCheck object: Manage the deletion of a schematic object.
SchAppDeleteCheck2 object: Manage the deletion of a schematic object.
SchAppEnvironment object: Manage the application environment in a schematic session.
SchAppGapPriority object: Manage the graphical representation of a route.
SchAppGroup object: Manage application group.
SchAppModelInit object: Manage the initialization of application model.
SchAppMultiImage object: Interface to manage the image object in the Multi-Image-Object concept.
SchAppMultiImageMaster object: Interface to manage the master object in the Multi-Image-Object concept.
SchAppObjectFactory object: Application factory to create application objects.
SchAppObjectFactory2 object: Application factory to create application objects.
SchAppReplace object: Manage a schematic component.
SchAppRoute object: Manage a schematic route.
SchAppRoute2 object: Manage a schematic route.
SchAppScalingRule object: Provide application rule of how to scale schematic objects.
SchAppZone object: Manage a schematic zone.
SchArrowDisplay object: Manage the graphical representation of a schematic route.
SchBaseFactory object: Factory to create basic schematic objects.
SchBoundaryElem object: Manage a boundary element of a schematic zone.
SchCatalogComponent object: Manage a schematic component catalog.
SchCatalogRoute object: Manage a schematic route catalog.
SchCntrConnect object: Manage the a schematic connector.
SchCntrDocLink object: Manage the on-off sheet connector.
SchCntrGraphic object: Manage the graphical representation of a schematic connector.
SchCntrLocation object: Manage the location of a schematic connector.
SchCompConnector object: Manage the connectors of a schematic component.
SchCompFlow object: Manage the internal flow of a schematic component.
SchCompGraphic object: Manage the graphical representation of a schematic component.
SchCompGroupExt object: Manage the graphical representation of a temporary group of schematic objects.
SchCompatible object: Provides connecting rule to schematic objects.
SchComponent object: Manage a schematic component.
SchComponent2 object: Manage a schematic component.
SchComponentGroup object: Represents a temporary group of schematic objects for component placement.
SchConnectable object: Represents schematic objects that can be connected to others.
SchDropOffView object: Manage the drop off views in a schematic viewer.
SchFrameInfo object: Manage the background view of a schematic viewer.
SchGRR object: Manage the graphical representation of a schematic object.
SchGRRCntr object: Manage the graphical representation of a schematic connector.
SchGRRComp object: Manage the graphical representation of a schematic component.
SchGRRFactory object: Factory to create graphical representations of schematic objects.
SchGRRRoute object: Manage the graphical representations of a schematic route.
SchGRRRoute2 object: Manage the graphical representation of a schematic route.
SchGRRRouteAlternate object: Manage the graphical styles for alternative route graphics.
SchGRRRouteEllipse object: Manage the graphical representation of a schematic route.
SchGRRZone object: Manage the graphical representation of a schematic zone.
SchGapDisplay object: Manage the graphical representation of a schematic route.
SchInternalFlow object: Represents the internal flow object in a schematic component.
SchListOfBSTRs object: Represents a non-persistant list of character strings to be used with Schematic IDLs.
SchListOfDoubles object: Represents a list of DOUBLEs to be used with Schematic IDLs.
SchListOfLongs object: Represent a non-persistant list of LONGs to be used with schematic IDLs.
SchListOfObjects object: Represent a non-persistant list of schematic objects.
SchMovable object: Manage the transformation of a schematic component.
SchMovable2 object: Manage rotation of a schematic object.
SchNetworkAnalysis object: Represents a schematic network.
SchObsoleteModel object: Manage obsolete model elements.
SchPostReplace object: Manage post component replacement behaviors.
SchReplace object: Manage existing schematic component instances.
SchRoute object: Manage a schematic route data.
SchRouteAlternateGraphic object: Manage alternative graphical primitives of a schematic route.
SchRouteGraphic object: Manage graphical primitives representing a schematic route.
SchRouteSymbol object: Manage a symbol placed on a route.
SchSession object: Represents a schematic session.
SchTempListFactory object: Create temporary (non-persistent) lists to be used in VB environment.
SchUpdateInstances object: Interface to update all component instances when the catalog reference component has been changed.
SchWorkbench object: Represents a workbench on a schematic document.
SchZone object: Manage zone boundaries.
SchZoneGraphic object: Manage graphical representations of a schematic zone.
SchZoneMembership object: Manage zone memberships.
SchematicExtension object: Manage schematic extensions.
SchematicRoot object: Represents the top node of the schematic object tree.
Score property in object SWKDOF: Returns the score corresponding to the DOF's current value.
ScoringMode property in object DrawingDimValue: Get dimension scoring mode.
Scratch property in object ABQJob: Sets or returns or the path to the scratch directory.
Script property in object FeatureGenerator: Returns or sets the script that describes what is to be generated.
ScriptText property in object FunctScript: Get the ScriptText.
Scripts property in object FunctGenScriptMgr: Get the Generative Scripts collection.
SddProduct object: Interface to create a SDD Design Unit under a Product.
Search method in object Selection: Finds an object in the document using the Edit/Search grammar.
SearchAlgoType property in object DefaultAnnotation: Get the type of search algo to find geometry on which the annotation apply to.
SearchFacet method in object FunctionalObject: Searches the Facet.
SearchFacet method in object FunctionalAction: Searches the Facet.
SearchFacet method in object FunctionalDescription: Searches the Facet.
SearchFacetByName method in object FunctionalObject: Searches the Facet.
SearchFacetByName method in object FunctionalAction: Searches the Facet.
SearchFacetByName method in object FunctionalDescription: Searches the Facet.
SearchIntensity property in object CollisionFreeWalk: Returns and sets the value for 'Search Intensity' in a collision free walk.
SearchSettingAtt object: Represents the setting controller for the Search property tab page.
Search_List_Size property in object MigrBatchSettingAtt: Retrieves or sets the size of the "Mapping Files Location for Retrieving" list.
Second property in object HybridShapePlane2Lines: Role: Get the second line.
Second property in object HybridShapePlane3Points: Returns or sets the second point.
SecondAngle property in object Revolution: Returns the revolution second angle.
SecondAngleLaw property in object HybridShapeSweepCircle: Returns or sets the second angle law useful in some circular sweep types.
SecondAngleLawInversion property in object HybridShapeSweepCircle: Returns or sets the second angle law inversion information.
SecondComponentDirection property in object SolidCombine: Returns or sets the direction of second component of SolidCombine.
SecondComponentProfile property in object SolidCombine: Returns or sets the profile of second component of SolidCombine.
SecondContinuity property in object HybridShapeConnect: Gets or Sets the continuity on second curve.
SecondCurve property in object HybridShapeConnect: Gets or Sets the second reference curve.
SecondCurve property in object SfmMemberPlane2Curves
SecondDirectionRepartition property in object RectPattern: Returns the linear repartition along the second direction.
SecondDirectionRow property in object RectPattern: Returns the position of the shape to be copied along the second linear direction.
SecondElem property in object HybridShapeTrim
SecondElem property in object HybridShapeCorner: Returns or sets the corner second reference element.
SecondElem property in object HybridShapeFilletBiTangent: Returns or sets the Second support surface feature.
SecondElem property in object HybridShapeFilletTriTangent: Returns or sets the Second support surface feature.
SecondElement property in object HybridShapeRotate: Returns or sets the second element defining the rotation angle.
SecondFace property in object FaceFillet: Returns or sets the second limiting face.
SecondFace property in object TritangentFillet: Returns the second face limiting the tritangent fillet.
SecondGroup property in object Clash: Returns or sets the second group used by the computation.
SecondGroup property in object Distance: Returns or sets the second group used by the computation.
SecondGuideCrv property in object HybridShapeSweepLine: Returns or sets the sweep operation second guide curve.
SecondGuideCrv property in object HybridShapeSweepConic: Returns or sets the second guide curve.
SecondGuideCrv property in object HybridShapeSweepCircle: Returns or sets the sweep operation second guide curve.
SecondGuideCrv property in object HybridShapeSweepExplicit: Gets the second guide curve (optional).
SecondGuideSurf property in object HybridShapeSweepLine: Returns or sets the sweep operation second guide surface.
SecondLawRelimiter property in object HybridShapeFilletBiTangent: Gets or sets Law second relimiter for variable shape fillet with law management.
SecondLengthLaw property in object HybridShapeSweepLine: Returns or sets second length law useful in some linear sweep types.
SecondLengthLawInversion property in object HybridShapeSweepLine: Returns or sets whether the second length law has to be inverted.
SecondLimit property in object Prism: Returns the second prism limit (one of the two).
SecondLimit property in object AssemblyPocket: Returns the second pocket limit.
SecondLimitType property in object HybridShapeRevol: Returns or sets the Second limit type.
SecondLimitType property in object HybridShapeExtrude: Returns or sets the Second limit type.
SecondMember property in object SfmMemberPlane2Curves: Returns or sets the Second Member.
SecondOrientation property in object RectPattern: Returns or sets whether the pattern is built towards the second direction orientation.
SecondOrientation property in object HybridShapeTrim
SecondOrientation property in object HybridShapeCorner: Returns or sets the orientation of the corner second reference element.
SecondOrientation property in object HybridShapeConnect: Gets or Sets the orientation of second curve SecondOrientation = 1 : SameOrientation.
SecondOrientation property in object HybridShapeFilletBiTangent: Returns or Sets the Second orientation used to specify fillet center position.
SecondOrientation property in object HybridShapeFilletTriTangent: Returns or sets the Second orientation used to specify fillet center position.
SecondPoint property in object HybridShapeRotate: Returns or sets the second point defining the rotation.
SecondPoint property in object HybridShapeConnect: Gets or Sets the second reference point.
SecondPoint property in object HybridShapeTranslate: Returns or sets the second point defining the translation.
SecondPoint property in object HybridShapePointBetween: Returns or sets the second reference point.
SecondProduct property in object Distance: Returns the product belonging to the second group that realizes the minimum distance.
SecondProduct property in object Conflict: Returns the second product involved in the conflict.
SecondRectangularPatternParameters property in object RectPattern: Returns or sets the rectangular pattern parameters required to define the pattern.
SecondSurface property in object SfmMemberSurfSurf: Returns the SuperMember's second surface.
SecondSurfaceOffset property in object SfmMemberSurfSurf: Returns or sets the SuperMember's second surface offset.
SecondSurfaceOffsetParam property in object SfmMemberSurfSurf
SecondSurfaceOrientation property in object SfmMemberSurfSurf: Returns or sets the SuperMember's second surface orientation.
SecondTangentOrientation property in object HybridShapeCorner: Returns or sets the tangent orientation of the corner second reference element.
SecondTension property in object HybridShapeConnect: Returns the tension on the second curve making up the connect curve.
SecondTrimOption property in object HybridShapeSweepLine: Returns or sets the trim option for the second tangency surface.
SecondUptoElem property in object Line: Role: Gets the Second upto element of the line.
SecondUptoElement property in object HybridShapeRevol: Returns or sets the Second up-to element used to limit Revolution.
SecondUptoElement property in object HybridShapeExtrude: Returns or sets the Second up-to element used to limit extrusion.
SectPattern property in object FTASettingAtt: Returns or sets the Pattern of Visu setting parameter value.
SectPattern property in object DMUTolSettingAtt: Returns or sets the Pattern of Visu setting parameter value.
Section property in object StrMember: Returns or sets the section object.
Section object: Represents the Section object.
Section property in object Export3DXmlSettingAtt
SectionAngle property in object SfmStiffenerOnFreeEdge: Returns or sets the SFE's section angle.
SectionCoupling property in object HybridShapeLoft: Returns or sets the type of coupling between sections of the loft.
SectionDiameter property in object ArrangementRun: Returns or sets the SectionDiameter for an ArrangementRun object.
SectionDiameter property in object ArrangementPathway: Returns or sets the SectionDiameter for an ArrangementPathway object.
SectionExportType property in object SectioningSettingAtt: Returns or sets the SectionExportType parameter.
SectionFill property in object SectioningSettingAtt: Returns or sets the SectionFill parameter.
SectionHeight property in object ArrangementRun: Returns or sets the SectionHeight for an ArrangementRun object.
SectionHeight property in object ArrangementPathway: Returns or sets the SectionHeight for an ArrangementPathway object.
SectionHeight property in object ArrangementBoundary: Returns or sets the SectionHeight for an ArrangementBoundary object.
SectionName property in object StrSection: Returns the parameter defining the section name.
SectionName property in object StrObjectExt: Returns the SectionName of the SR1 object.
SectionName property in object SfmProfile: Returns or sets the member's section name.
SectionName property in object SfmObjectExt: Returns the SectionName of the structural object.
SectionOrientation property in object SfmStiffener: Returns or sets the section orientation.
SectionPlane property in object HybridShapeSection: Returns or sets the section plane.
SectionType property in object ArrangementRun: Returns or sets the SectionType for an ArrangementRun object.
SectionType property in object HybridShapeFilletBiTangent: Returns or Sets fillet section type.
SectionType property in object ArrangementPathway: Returns or sets the Section for an ArrangementPathway object.
SectionType property in object ArrangementBoundary: Returns or sets the SectionType for an ArrangementBoundary object.
SectionWidth property in object ArrangementRun: Returns or sets the SectionWidth for an ArrangementRun object.
SectionWidth property in object ArrangementPathway: Returns or sets the SectionWidth for an ArrangementPathway object.
SectionWidth property in object ArrangementBoundary: Returns or sets the SectionWidth for an ArrangementBoundary object.
SectioningSettingAtt object: The interface to access a CATIASectioningSettingAtt.
Sections object: A collection of all Section objects currently managed by the application.
Sections property in object SPAWorkbench: Returns the Sections collection.
SectionsCatalogPath property in object PathESSRessourcesSettingAtt: Returns or sets the SectionsCatalogPath parameter.
SeeHiddenElements property in object Document: Returns or sets the document's hidden elements visibility.
SegmentsDisplayed property in object SWKBody: Returns or sets the display of the segments.
SelectBehavior method in object BehaviorExtension: Selects and executes a behavior of the technological object.
SelectElement2 method in object Selection: Runs an interactive selection command.
SelectElement3 method in object Selection: Runs an interactive selection command, exhaustive version.
SelectElement4 method in object Selection: Runs an interactive selection command, enabling the selection in a non active document.
SelectPublishedGeometry property in object FTASettingAtt: Returns or sets the Slect Published Geometry parameter.
SelectedElement object: Represents an element contained by a Selection object.
Selection object: Represents the selection.
Selection property in object Document: Returns the current selection.
SelectionSets object: Interface to manage the Selection Sets in a document.
SemanticGDT object: Interface managing Semantic GDT.
SemanticGDT method in object Annotation2: Gets the annotation on the DatumSimple interface.
SemanticGDTCommonZone object: Interface for accessing Common Zone, CZ, modifier on a Semantic GDT (ISO Standard only).
SemanticGDTFrameExtension object: Interface to parse Semantic GDT auxiliary feature.
SemanticGDTNxDisplay object: Interface to distinguish Collection of features from Separate features GDT.
SendToService object: This interface allows to use 'Send To' functionalities through an API.
Separator property in object NumericalDisplayFormat: Retrieves or sets the annotation separator.
ServerStatisticsSettingAtt object: Interface for Server statistic Controler Role: the server statistics controler manages the values of all or only a part of the attributes available for the thematic.
ServerTimeOut property in object LicenseSettingAtt: Retrieves or Sets the server time out.
ServicePack property in object SystemConfiguration: Returns the CATIA service pack number.
SessionStatisticsSettingAtt object: Interface for Session statistic Controler Role: the session statistics controler manages the values of all or only a part of the attributes available for the thematic.
Set property in object Capture: Retrieves tolerancing set the Capture belongs too.
SetASNavigationModeLock method in object SimulationSettingAtt: Locks or unlocks the ASNavigationMode parameter.
SetASStepSizeLock method in object SimulationSettingAtt: Locks or unlocks the ASStepSize parameter.
SetAbsDatas method in object Shot: Set the data related to the shot.
SetAbsoluteAxisData method in object Sketch: Sets the absolute axis of the sketch in 3D space.
SetAccelColorLock method in object DevAnalysisSettingAtt: Locks or unlocks the AccelColor parameter.
SetAccelLimitLock method in object DevAnalysisSettingAtt: Locks or unlocks the AccelLimit parameter.
SetAccelerationValue method in object GenericMotionProfile: Set acceleration value of the Profile.
SetAccuracyProfile method in object RobotMotion: Sets the Accuracy profile.
SetAccuracyType method in object GenericAccuracyProfile: Set the accuracy type for the profile.
SetAccuracyValue method in object GenericAccuracyProfile: Set accuracy value of the profile.
SetAccuratePickingModeLock method in object VisualizationSettingAtt: Locks or unlocks the AccuratePickingMode setting parameter.
SetAccuratePickingWindowSizeLock method in object VisualizationSettingAtt: Locks or unlocks the AccuratePickingWindowSize setting parameter.
SetActivate2DModeLock method in object Layout2DSettingAtt: Locks or unlocks the Activate2DMode parameter.
SetActivationModeLock method in object CacheSettingAtt: Locks or unlocks the Cache Activation mode.
SetActivationStateLock method in object MemoryWarningSettingAtt: Locks or unlocks the activation mode of the memory warning mechanism.
SetActivationStateLock method in object DisconnectionSettingAtt: Locks or unlocks the activation mode of automatic disconnection.
SetActivationStatus method in object AnalysisImage: Activates oe deactivates an image.
SetActiveTask method in object ActiveTask: Defines the Active Task for an activity for a particular Resource.
SetAdditionalSymbol method in object DrawingWelding: Sets the additional symbol of the drawing welding.
SetAffiche_AttributLock method in object MigrBatchSettingAtt: Locks or unlocks the "Display Report Attribute" setting parameter.
SetAlignVector method in object SchCntrLocation: Set the current alignment vector of the connector.
SetAlignmentConnector method in object PspPartConnector: Sets the Face connector.
SetAlignmentVector method in object PspLightConnector: Sets the alignment direction of the connector.
SetAllChecksReportLock method in object ReportGenerationSheetSettingAtt: Locks or unlocks the AllChecksReport parameter.
SetAllJointsSpeedLock method in object HtsJointSpeedSettingsAtt: Locks or unlocks the JointSpeed parameter.
SetAllResourceFilterLock method in object VerifTabSettingAtt: Locks or unlocks the "View All Resources" parameter.
SetAllZBufferElementModeLock method in object VisualizationSettingAtt: Locks or unlocks the AllZBufferElementMode setting parameter.
SetAllowDistortionsLock method in object FTAInfraSettingAtt: Locks or unlocks the Allow Distorsions setting parameter value.
SetAllowReplaceStructExposedDuringExtractSaveLock method in object CDMASettingAtt: Locks or unlocks the enabling of forbidding overwriting existing part.
SetAlphabeticOrderLock method in object FTASettingAtt: Locks or unlocks the AlphabeticOrder setting parameter value.
SetAlsoDeleteExclusiveParentsLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "AlsoDeleteExclusiveParents" parameter.
SetAlternateViewLock method in object Export3DXmlSettingAtt
SetAmbientActivationLock method in object VisualizationSettingAtt: Locks or unlocks the AmbientActivation setting parameter.
SetAnalysisCacheModeLock method in object AnalysisGeneralSettingAtt: Locks or unlocks the flag.
SetAnalysisDisplayModeLock method in object FTASettingAtt: Locks or unlocks the AnalysisDisplayMode parameter.
SetAnalysisLevelLock method in object AnalysisSettingAtt: Locks or unlocks the AnalysisLevel parameter.
SetAnalysisLoadModeLock method in object AnalysisGeneralSettingAtt: Locks or unlocks the flag.
SetAnalysisNamingAutoLock method in object AnalysisGeneralSettingAtt: Locks or unlocks the flag.
SetAngle method in object HybridShapeSweepLine: Sets the angle values useful in some linear sweep types.
SetAngle method in object HybridShapeSweepCircle: Sets the angle values useful in some circular sweep types.
SetAngleLawTypes method in object HybridShapeSweepCircle: Sets angle law types.
SetAngleLimitLock method in object FittingSettingAtt: Locks or unlocks the AngleLimit parameter.
SetAngleLock method in object IgesSettingAtt: Locks or unlocks the Angle setting parameter.
SetAngleMaxToleranceLock method in object ToleranceSheetSettingAtt: Locks or unlocks the AngleMaxTolerance parameter.
SetAngleMinToleranceLock method in object ToleranceSheetSettingAtt: Locks or unlocks the AngleMinTolerance parameter.
SetAnglePitchParam method in object HybridShapeSpiral: Sets Angle pitch parameter.
SetAngleRadiusParam method in object HybridShapeSpiral: Sets Angle radius parameters.
SetAngleRef method in object HybridShapeSweepExplicit: Sets the angle value associated to the reference surface.
SetAngleStepLock method in object ManipSettingAtt: Locks or unlocks the AngleStep parameter.
SetAngulaireGeneralTolClassLock method in object FTASettingAtt: Locks or unlocks the Dimension general class parameter.
SetAngularAccelerationValue method in object GenericMotionProfile: Set Angular acceleration value of the Profile.
SetAngularLaw method in object HybridShapeSweepLine: Sets the angular law useful in some linear sweep types.
SetAngularSpeedValue method in object GenericMotionProfile: Set Angular Speed value of the Profile.
SetAngularThreshold method in object HybridShapeExtractMulti: Sets the AngularThreshold in the list of constraints at specified position.
SetAngularThresholdActivity method in object HybridShapeExtractMulti: Sets the AngularThresholdActivity in the list of constraints at specified position.
SetAngularTolerance method in object HybridShapeAssemble: Set the anglular tolerance.
SetAngularToleranceMode method in object HybridShapeAssemble: Set the anglular tolerance mode.
SetAnimationLock method in object Export3DXmlSettingAtt: Locks or unlocks the flag.
SetAnlAccelLimitLock method in object AnalysisSettingAtt: Locks or unlocks the AnlAccelLimit parameter.
SetAnlCautionZoneLock method in object AnalysisSettingAtt: Locks or unlocks the AnlCautionZone parameter.
SetAnlIOAnalysisLock method in object AnalysisSettingAtt: Locks or unlocks the AnlIOAnalysis parameter.
SetAnlIntDistLock method in object AnalysisSettingAtt: Locks or unlocks the AnlIntDist parameter.
SetAnlIntfLock method in object AnalysisSettingAtt: Locks or unlocks the AnlIntf parameter.
SetAnlLinAccelLimitLock method in object AnalysisSettingAtt: Locks or unlocks the AnlLinAccelLimit parameter.
SetAnlLinSpeedLimitLock method in object AnalysisSettingAtt: Locks or unlocks the AnlLinSpeedLimit parameter.
SetAnlMeasureLock method in object AnalysisSettingAtt: Locks or unlocks the AnlMeasure parameter.
SetAnlRotAccelLimitLock method in object AnalysisSettingAtt: Locks or unlocks the AnlRotAccelLimit parameter.
SetAnlRotSpeedLimitLock method in object AnalysisSettingAtt: Locks or unlocks the AnlRotSpeedLimit parameter.
SetAnlTravelLimitLock method in object AnalysisSettingAtt: Locks or unlocks the AnlTravelLimit parameter.
SetAnlVelocityLimitLock method in object AnalysisSettingAtt: Locks or unlocks the AnlVelocityLimit parameter.
SetAnnotDimInvalidColor method in object FTASettingAtt: Sets the AnnotDimInvalidColor parameter.
SetAnnotDimInvalidColorLock method in object FTASettingAtt: Locks or unlocks the AnnotDimInvalidColor parameter.
SetAnnotDimInvalidLock method in object FTASettingAtt: Retrieves environment informations for the AnnotDimInvalid parameter.
SetAnnotDimOnDeletedGeomColor method in object FTASettingAtt: Sets the AnnotDimOnDeletedGeomColor parameter.
SetAnnotDimOnDeletedGeomColorLock method in object FTASettingAtt: Locks or unlocks the AnnotDimOnDeletedGeomColor parameter.
SetAnnotDimOnDeletedGeomLock method in object FTASettingAtt: Locks or unlocks the AnnotDimOnDeletedGeom parameter.
SetAnnotDimOnUnloadedGeomColor method in object FTASettingAtt: Sets the AnnotDimOnUnloadedGeomColor parameter.
SetAnnotDimOnUnloadedGeomColorLock method in object FTASettingAtt: Locks or unlocks the AnnotDimOnUnloadedGeomColor parameter.
SetAnnotDimOnUnloadedGeomLock method in object FTASettingAtt: Locks or unlocks the AnnotDimOnUnloadedGeom parameter.
SetAnnotOnZeroZSettingLock method in object FTASettingAtt: Locks or unlocks the AnnotOnZeroZSetting parameter.
SetAnnotatedViewLock method in object Export3DXmlSettingAtt
SetAnnotation3DLock method in object Export3DXmlSettingAtt: Locks or unlocks the flag.
SetAnnotation3DModeLock method in object MultiCADSettingAtt: Locks or unlocks the Annotation3DMode parameter.
SetAnnotationActivityLock method in object WorkGeneralSettingAtt: Locks or unlocks the AnnotationActivity parameter.
SetAntiAliasingModeLock method in object VisualizationSettingAtt: Locks or unlocks the AntiAliasingMode setting parameter.
SetAntiAliasingOffsetLock method in object VisualizationSettingAtt: Locks or unlocks the AntiAliasingOffset setting parameter.
SetAppendContextChkBLock method in object MfgHubSettingAtt: Locks or unlocks the AppendContextChkB parameter.
SetApplicativeDataFilterLock method in object TreeTabSettingAtt: Locks or unlocks the "Applicative Data" parameter.
SetApplyJoinLock method in object IgesSettingAtt: Locks or unlocks the Apply Join setting parameter.
SetApplyLabelEffToAltChildLock method in object MfgHubSettingAtt: Locks or unlocks the ApplyLabelEffToAltChild parameter.
SetArcSelectionActivationLock method in object TreeVizManipSettingAtt: Locks or unlocks the arc-selection mode applied to the specification tree.
SetArea method in object PrintArea: Sets a set of coordinates to define a rectangle print area.
SetAreaForm method in object DatumTarget: Sets the form of the target area.
SetArrangementNomenclature method in object ArrangementProduct: Sets the nomenclature of the ArrangementProduct.
SetArrow method in object SchArrowDisplay: Add arrow display attributes on the route.
SetAsDetail method in object DrawingSheet: Sets the sheet as a detail sheet.
SetAsLastLimit method in object SfmSuperPlate: Adds one limit at the end of the list.
SetAskAnlModeLock method in object AnalysisSettingAtt: Locks or unlocks the AskAnlMode parameter.
SetAskBeforeOverwriteExistingPartsLock method in object CDMASettingAtt: Locks or unlocks the enabling of asking before overwriting existing part.
SetAssemble method in object HybridShapeExtrapol: Sets whether extrapolation is to be assembled with extrapolated curve or surface.
SetAssignedViewerLock method in object TreeTabSettingAtt: Locks or unlocks the "Assigned Viewer" parameter.
SetAsso_modeLock method in object V4WritingSettingAtt: Locks or unlocks the Asso_mode setting parameter.
SetAssociatedToolTip method in object HomePosition: Set the tool tip associated with the home position.
SetAthAnnotationLock method in object SimulationSettingAtt: Locks or unlocks the AthAnnotation parameter.
SetAthDisableSimLock method in object SimulationSettingAtt: Locks or unlocks the AthDisableSim parameter.
SetAthEndConditionLock method in object SimulationSettingAtt: Locks or unlocks the AthEndCondition parameter.
SetAthHyperlinkLock method in object SimulationSettingAtt: Locks or unlocks the AthHyperlink parameter.
SetAthSelAgentDlgLock method in object SimulationSettingAtt: Locks or unlocks the AthSelAgentDlg parameter.
SetAthStateMgtLock method in object SimulationSettingAtt: Locks or unlocks the AthStateMgt parameter.
SetAthTextMsgLock method in object SimulationSettingAtt: Locks or unlocks the AthTextMsg parameter.
SetAthViewpointLock method in object SimulationSettingAtt: Locks or unlocks the AthViewpoint parameter.
SetAttAPLock method in object StepSettingAtt: Locks or unlocks the AttAP parameter.
SetAttASMGVPLock method in object StepSettingAtt: Locks or unlocks the AttASMGVP parameter.
SetAttASMLock method in object StepSettingAtt: Locks or unlocks the AttASM parameter.
SetAttAngleDefFitingLock method in object StepSettingAtt: Locks or unlocks the AttAngleDefFiting parameter.
SetAttAnnotationExportLock method in object StepSettingAtt: Locks or unlocks the AttAnnotationExport parameter.
SetAttAnnotationLock method in object StepSettingAtt: Locks or unlocks the AttAnnotation parameter.
SetAttCompositesLock method in object StepSettingAtt: Locks or unlocks the AttComposites parameter.
SetAttExportRepModeLock method in object StepSettingAtt: Locks or unlocks the AttExportRepMode parameter.
SetAttFittingLock method in object StepSettingAtt: Locks or unlocks the AttFitting parameter.
SetAttGVPCOPSLock method in object StepSettingAtt: Locks or unlocks the AttGVP parameter.
SetAttGVPCOPSSAGLock method in object StepSettingAtt: Locks or unlocks the AttGVPVA parameter.
SetAttGVPCOPSTolLock method in object StepSettingAtt: Locks or unlocks the AttGVPVA parameter.
SetAttGVPCdGLock method in object StepSettingAtt: Locks or unlocks the AttGVPCdG parameter.
SetAttGVPLock method in object StepSettingAtt: Locks or unlocks the AttGVP parameter.
SetAttGVPVALock method in object StepSettingAtt: Locks or unlocks the AttGVPVA parameter.
SetAttGroupModeLock method in object StepSettingAtt: Locks or unlocks the AttGroupMode parameter.
SetAttHeaderAuthorLock method in object StepSettingAtt: Locks or unlocks the AttHeaderAuthor parameter.
SetAttHeaderAuthorisationLock method in object StepSettingAtt: Locks or unlocks the AttHeaderAuthorisation parameter.
SetAttHeaderDescriptionLock method in object StepSettingAtt: Locks or unlocks the AttHeaderDescription parameter.
SetAttHeaderOrganisationLock method in object StepSettingAtt: Locks or unlocks the AttHeaderOrganisation parameter.
SetAttIASMLock method in object StepSettingAtt: Locks or unlocks the AttIASM parameter.
SetAttLayersFiltersLock method in object StepSettingAtt: Locks or unlocks the AttLayersFilters parameter.
SetAttMultiCADLock method in object StepSettingAtt: Locks or unlocks the AttMultiCAD parameter.
SetAttOptimizeC2Lock method in object StepSettingAtt: Locks or unlocks the AttOptimizeC2 parameter.
SetAttReportLock method in object StepSettingAtt: Locks or unlocks the AttReport parameter.
SetAttShowLock method in object StepSettingAtt: Locks or unlocks the AttShow parameter.
SetAttTessPreferedLock method in object StepSettingAtt: Locks or unlocks the AttTessPrefered parameter.
SetAttTolDefOptFitLock method in object StepSettingAtt: Locks or unlocks the AttTolDefOptFit parameter.
SetAttUDALock method in object StepSettingAtt: Locks or unlocks the AttUDA parameter.
SetAttUnitsLock method in object StepSettingAtt: Locks or unlocks the AttUnits parameter.
SetAttachedOwner method in object TCPTrace: Sets the default attached owner of the trace.
SetAttachedOwner method in object TCPTraceManager: Sets the default attached owner of the trace.
SetAttrLock method in object SettingRepository: Locks or unlocks an attribute.
SetAttribute method in object WIText
SetAttribute method in object AnalysisMeshLocalSpecification: Sets the value corresponding to the given local specification.
SetAttributeValue method in object ParameterProfiles
SetAttributeValueReal method in object AMPTag: Function to set the value of the given real attribute on the given AMPTag.
SetAttributeValueString method in object AMPTag: Function to set the value of the given string attribute on the given AMPTag.
SetAttributesFilterLock method in object TreeTabSettingAtt: Locks or unlocks the "Attributes" parameter.
SetAuthorNameLock method in object IgesSettingAtt: Locks or unlocks the AuthorName parameter.
SetAuthorOrganizationLock method in object IgesSettingAtt: Locks or unlocks the AuthorOrganization parameter.
SetAutoCCPLock method in object HtsCCPSettingAtt: Locks or unlocks the AutoCCP parameter.
SetAutoExpandActivationLock method in object TreeVizManipSettingAtt: Locks or unlocks the automatic expand mode applied to the specification tree.
SetAutoHighLock method in object CDMASettingAtt: Locks or unlocks the automatic highlight in PSN status.
SetAutoLoadMfgCtxLock method in object MfgHubSettingAtt: Locks or unlocks the AutoLoadMfgCtx parameter.
SetAutoLoadSrvMfgCtxLock method in object MfgHubSettingAtt: Locks or unlocks the AutoLoadSrvMfgCtx parameter.
SetAutoLoadVolCtxLock method in object MfgHubSettingAtt: Locks or unlocks the AutoLoadVolCtx parameter.
SetAutoName method in object ArrangementProduct: Causes the name of the ArrangementProduct automatically.
SetAutoPreviewModeLock method in object AnalysisPostProSettingAtt: Locks or unlocks the AutoPreviewMode parameter.
SetAutoReframeFilterLock method in object VerifTabSettingAtt: Locks or unlocks the "Auto Reframe" parameter.
SetAutoSaveLock method in object GeneralSessionSettingAtt: Locks or unlocks the data save parameter.
SetAutoScrollActivationLock method in object TreeVizManipSettingAtt: Locks or unlocks the automatic scrolling mode applied to the specification tree.
SetAutoSwitchToDesignModeLock method in object AsmGeneralSettingAtt: Locks or unlocks the implicit switch from visualization mode to design mode setting parameter.
SetAutoUpdateModeLock method in object AsmGeneralSettingAtt: Locks or unlocks the automatic update setting parameter.
SetAutoWalkActColorLock method in object HtsTaskDisplaySettingAtt: Locks or unlocks the AutoWalkActColor parameter.
SetAutoWalkActLineTypeLock method in object HtsTaskDisplaySettingAtt: Locks or unlocks the AutoWalkActLineType parameter.
SetAutoWalkActLineWeightLock method in object HtsTaskDisplaySettingAtt: Locks or unlocks the AutoWalkActLineWeight parameter.
SetAuxAxesValues method in object AMPTag: Function to set the auxilliary axes values of the given AMPTag.
SetAuxiliaryDrillViewerLock method in object VisualizationSettingAtt: Locks or unlocks the AuxiliaryDrillViewer setting parameter.
SetAuxillaryAxisHome method in object RobotMotion: Sets the underlying Auxillary device Home.
SetAuxillaryAxisValues method in object RobotMotion: Sets the Auxillary device Joint values.
SetAxisSystemSizeLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "AxisSystemSize" parameter.
SetAxisSystemTTRS method in object ReferenceFrame: Sets the AxisSystem TTRS.
SetAxisSysteme method in object DrawingViewGenerativeBehavior: Defines an axis systeme in the view.
SetBKTAccessRightsLock method in object BehaviorSettingAtt: Locks or unlocks the BKTAccessRights parameter.
SetBKTBehaviorOperationMessageLock method in object BehaviorSettingAtt: Locks or unlocks the BKTBehaviorOperationMessage parameter.
SetBKTSpecificationTreeLock method in object BehaviorSettingAtt: Locks or unlocks the BKTSpecificationTree parameter.
SetBackClippingPlaneLock method in object Layout2DSettingAtt: Locks or unlocks the BackClippingPlane parameter.
SetBackFaceCullingModeLock method in object VisualizationSettingAtt: Locks or unlocks the BackFaceCullingMode setting parameter.
SetBackgroundImageModeLock method in object AnalysisReportingSettingAtt: Locks or unlocks the BackgroundImageMode parameter.
SetBackgroundRGB method in object VisualizationSettingAtt: Sets the BackgroundRGB parameter.
SetBackgroundRGBLock method in object VisualizationSettingAtt: Locks or unlocks the BackgroundRGB setting parameter.
SetBaseSurfaceNormal method in object ARCTag: Function to set the Base Surface Normal associated with the ARC tag.
SetBaultText method in object DrawingDimValue: Set bault text to dimension value.
SetBeepModeLock method in object AnalysisSettingAtt: Locks or unlocks the BeepMode parameter.
SetBeginMeridianAngle method in object HybridShapeSphere: Sets BeginMeridianAngle on the object.
SetBeginParallelAngle method in object HybridShapeSphere: Sets BeginParallelAngle on the object.
SetBendData method in object PspLightBend: Sets a list of bend radii.
SetBodiesUnderOperationsInTreeLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "BodiesUnderOperationsInTree" parameter.
SetBodyHideInCaptureLock method in object FTASettingAtt: Locks or unlocks the Dimension general class parameter.
SetBooleanAttribute method in object E5Property
SetBorderEdgesModeLock method in object VisualizationSettingAtt: Locks or unlocks the BorderEdgesMode setting parameter.
SetBorderEdgesRGB method in object VisualizationSettingAtt: Sets the BorderEdgesRGB parameter.
SetBorderEdgesRGBLock method in object VisualizationSettingAtt: Locks or unlocks the BorderEdgesRGB setting parameter.
SetBorderEdgesThicknessLock method in object VisualizationSettingAtt: Locks or unlocks the BorderEdgesThickness setting parameter.
SetBorderMode method in object HybridShapeBlend: Sets the type of border to a limit of the blend.
SetBoundaries2DLColor method in object Layout2DSettingAtt: Sets the Boundaries2DLColor parameter.
SetBoundaries2DLColorLock method in object Layout2DSettingAtt: Locks or unlocks the Boundaries2DLColor parameter.
SetBoundaries2DLDisplayLock method in object Layout2DSettingAtt: Locks or unlocks the Boundaries2DLDisplay parameter.
SetBoundaries2DLLineTypeLock method in object Layout2DSettingAtt: Locks or unlocks the Boundaries2DLLineType parameter.
SetBoundaries2DLThicknessLock method in object Layout2DSettingAtt: Locks or unlocks the Boundaries2DLThickness parameter.
SetBoundary method in object HybridShapeExtrapol
SetBoundaryContinuity method in object HybridShapeFill: Sets the continuity mode for a boundary at specified position in the Fill.
SetBoundingBoxSelectionModeLock method in object VisualizationSettingAtt: Locks or unlocks the BoundingBoxSelectionMode setting parameter.
SetBox method in object ThreeDCuts: Sets the RELATIVE box used for the 3D cut computation.
SetBoxDisplayLock method in object MeasureSettingAtt: Locks or unlocks the BoxDisplay parameter.
SetBranchIDs method in object MHILoadParameters: Sets the "subcompitem" IDs (oid) of the Branch.
SetBufferLength method in object ManufacturingOutput: Set the number of lines of the buffer before it will be flushed (default is 200).
SetCATFTAChamferGeneralTolClassLock method in object FTASettingAtt: Locks or unlocks the CATFTAChamferGeneralTolClass parameter.
SetCATFTAEdgesColor method in object FTASettingAtt: Sets the GetCATFTAEdgesColor parameter.
SetCATFTAEdgesColorLock method in object FTASettingAtt: Locks or unlocks the GetCATFTAEdgesColor parameter.
SetCATFTAEdgesLineTypeLock method in object FTASettingAtt: Locks or unlocks the CATFTAEdgesLineType parameter.
SetCATFTAEdgesThicknessLock method in object FTASettingAtt: Locks or unlocks the CATFTAEdgesThickness parameter.
SetCATFTAUFAutoTolerancingLock method in object FTASettingAtt: Locks or unlocks the CATFTAUFAutoTolerancing parameter.
SetCATFTAUseLastTolerancesLock method in object FTASettingAtt: Locks or unlocks the CATFTAUseLastTolerances parameter.
SetCacheMaxSizeMoLock method in object CacheSettingAtt: Locks the paramater Cache maximum size.
SetCalibReferenceFile method in object CalibOffsets: Set the reference calibration file.
SetCalledTask method in object HumanCallTask
SetCalloutCreationDialogBoxLock method in object Layout2DSettingAtt: Locks or unlocks the CalloutCreationDialogBox parameter.
SetCalloutCreationInActiveViewLock method in object Layout2DSettingAtt: Locks or unlocks the CalloutCreationInActiveView parameter.
SetCartesianTarget method in object RobotMotion: Sets the Robot Cartesian target.
SetCautionColorLock method in object DevAnalysisSettingAtt: Locks or unlocks the CautionColor parameter.
SetCautionZoneLock method in object DevAnalysisSettingAtt: Locks or unlocks the CautionZone parameter.
SetCellAlignment method in object DrawingTable: Sets the pointed cell alignment of a drawing table.
SetCellBorderType method in object DrawingTable: Sets the pointed cell border type of a drawing table.
SetCellName method in object DrawingTable: Sets the name of a table cell.
SetCellObject method in object DrawingTable: Sets an object in a cell of a drawing table.
SetCellString method in object DrawingTable: Fills in a table cell with a string.
SetCentroid method in object GenericToolProfile: Set the tool centroid of Profile.
SetCheckExistInVPMBeforeFBDILock method in object CDMASettingAtt: Locks or unlocks the check of existence in VPM before FBDI.
SetCheckReportHtmlLock method in object ReportGenerationSheetSettingAtt: Locks or unlocks the CheckReportHtml parameter.
SetChoiceNbSurfaces method in object HybridShapeSweepLine: Sets a sequence which identifies a solution amongst all possibilities of a line-profile swept surface, case CATGSMLinearSweep_TwoTangencySurfaces.
SetChoiceNo method in object HybridShapeSweepLine: Sets the choice number associated with each solution of a given linear sweep case.
SetChoiceNo method in object HybridShapeLineBiTangent: Sets a sequence which identifies a solution among all possibilities.
SetCircularAreaSize method in object DatumTarget: Sets the size of the circular area.
SetClashColorLock method in object AnalysisSettingAtt: Locks or unlocks the ClashColor parameter.
SetClashModeLock method in object ManipSettingAtt: Locks or unlocks the ClashMode parameter.
SetClashSoundLock method in object ManipSettingAtt: Locks or unlocks the ClashSound parameter.
SetClashWhileMovingLock method in object FittingSettingAtt: Locks or unlocks the ClashWhileMoving parameter.
SetCleanTolCheckLock method in object V4WritingSettingAtt: Locks or unlocks the CleanTolCheck setting parameter.
SetCleanTolValueLock method in object V4WritingSettingAtt: Locks or unlocks the CleanTolValue setting parameter.
SetClearanceColorLock method in object AnalysisSettingAtt: Locks or unlocks the ClearanceColor parameter.
SetClearanceVoxelLock method in object N4DNavigatorSettingAtt: Locks or unlocks the ClearanceVoxel parameter.
SetClip method in object DrawingDimension: Creates a clip on the dimension at the given point, with respect to the side given by iKeptSide.
SetClippingFrameLock method in object Layout2DSettingAtt: Locks or unlocks the ClippingFrame parameter.
SetClippingFrameReframeOnModeLock method in object Layout2DSettingAtt
SetClippingModeLock method in object SectioningSettingAtt: Locks or unlocks the ClippingMode parameter.
SetClippingViewOutlineColor method in object Layout2DSettingAtt: Sets the ClippingViewOutlineColor parameter.
SetClippingViewOutlineColorLock method in object Layout2DSettingAtt: Locks or unlocks the ClippingViewOutlineColor parameter.
SetClippingViewOutlineLinetypeLock method in object Layout2DSettingAtt: Locks or unlocks the ClippingViewOutlineLinetype parameter.
SetClippingViewOutlineThicknessLock method in object Layout2DSettingAtt: Locks or unlocks the ClippingViewOutlineThickness parameter.
SetClosedContourSide method in object ManufacturingPrismaticMachiningArea: Sets the side of one closed contour of a Manufacturing Prismatic Machining Area.
SetClosing method in object HybridShapeSpline: Activates the closing option of the spline.
SetClosingPoint method in object HybridShapeBlend: Sets a new closing point to a closed curve of the blend.
SetCode_pageLock method in object InteropSettingAtt: Locks or unlocks the "Reading Code page" setting parameter.
SetCode_page_DestLock method in object V4WritingSettingAtt: Locks or unlocks the Code_page_Dest setting parameter.
SetCollWalkClearanceLock method in object HtsGeneralSettingAtt
SetCollapseExpandFilterLock method in object TreeTabSettingAtt: Locks or unlocks the "Disable Collapse/Expand" parameter.
SetCollisionSearchIntensityLock method in object HtsGeneralSettingAtt
SetColor method in object TCPTrace: Set the TCP trace component (DNBTCPTraceReps) color.
SetColorBackgroundModeLock method in object VisualizationSettingAtt: Locks or unlocks the ColorBackgroundMode setting parameter.
SetColorModeLock method in object AnalysisSettingAtt: Locks or unlocks the ColorMode parameter.
SetColorSynchronizationEditabilityLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ColorSynchronizationEditability" parameter.
SetColorSynchronizationModeLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ColorSynchronizationMode" parameter.
SetColorSynchronizationModeManageLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ColorSynchronizationModeManage" parameter.
SetColorSynchronizationModeOnFeatureLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ColorSynchronizationModeOnFeature" parameter.
SetColorSynchronizationModeOnSubElementsLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ColorSynchronizationModeOnSubElements" parameter.
SetColors3DExperienceManagementLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "Colors3DExperienceManagement" parameter.
SetColumnSize method in object DrawingTable: Sets the width of a column of a drawing table.
SetCompanionPathLock method in object DocumentationSettingAtt: Locks or unlocks the User Companion location parameter.
SetCompassPosLock method in object HtsCCPSettingAtt: Locks or unlocks the CompassPos parameter.
SetComplementaryExtractMulti method in object HybridShapeExtractMulti: Sets the Complementary flag checked/unchecked in the list of constraints at specified position.
SetComponents method in object Position: Sets the components of an object's position.
SetConeTypeBoundedCone method in object SWKBody
SetConeTypeBoundings method in object SWKBody
SetConeTypeFlat method in object SWKBody
SetConeTypeSpherical method in object SWKBody
SetConferencingLock method in object GeneralSessionSettingAtt: Locks or unlocks the conference driver parameter.
SetConfig method in object AMPTag: Function to set the config value of the given AMPTag.
SetConfig method in object RobotMotion: Sets the Configuration for the robot motion.
SetConnex method in object HybridShapeAssemble: Set the connex checker flag.
SetConstraintCreationModeLock method in object AsmConstraintSettingAtt: Locks or unlocks the constraint creation setting parameter.
SetConstraintElement method in object Constraint: Replaces an element of a constraint.
SetConstraintElement method in object SWKIKConstraint: Set the target object to follow.
SetConstraintVisuLocation method in object Constraint: Sets a new location for the constraint visualization.
SetConstraintsInGeometryLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ConstraintsInGeometry" parameter.
SetConstraintsNodeInTreeLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ConstraintsNodeInTree" parameter.
SetConstraintsSimulLock method in object HtsGeneralSettingAtt: Locks or unlocks the ConstraintsSimul parameter.
SetContextualFeaturesSelectableAtCreationLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ContextualFeaturesSelectableAtCreation" parameter.
SetContinuity method in object HybridShapeBlend: Sets the continuity to a limit of the blend.
SetContinuityType method in object HybridShapeExtrapol
SetContour method in object SfmStandardOpening: Sets Contour Information for Standard Opening.
SetContourSide method in object ManufacturingPrismaticMachiningArea: Sets the side of one contour of a Manufacturing Prismatic Machining Area.
SetConversionTechnologyLock method in object MultiCADSettingAtt: Locks or unlocks the ConversionTechnology parameter.
SetConversion_TableLock method in object InteropSettingAtt: Locks or unlocks the "Characters Equivalence Table Path" setting parameter.
SetCoordinates method in object Point: Sets cartesian coordinates of the point.
SetCoords method in object FunctionalPosition: Sets the coordinates.
SetCopyTransformation method in object ManufacturingCopyTransformation: Set the 'Number of Copies', 'Ordering' and 'Transformation Type' of a Copy Tranformation.
SetCopyTransformationTranslationAttributes method in object ManufacturingCopyTransformation: Set the 'Translation Type', 'Distance Along X', 'Distance Along Y' and 'Distance Along Z' of a Copy Tranformation which has a Translation as transformation.
SetCorrectedBaseOffset method in object CalibOffsets: Set corrected base offset for the robot base wrt robot base reference position.
SetCorrectedToolOffset method in object CalibOffsets: Set corrected tool offset for the robot wrt robot mount position.
SetCreateAssociativeUseEdgesLock method in object Layout2DSettingAtt: Locks or unlocks the CreateAssociativeUseEdges parameter.
SetCreateNewSheetFromLock method in object DraftingSettingAtt: Locks or unlocks the CreateNewSheetFrom parameter.
SetCreationMode method in object HybridShapeRotate: Sets the creation mode(creation or modification).
SetCreationMode method in object HybridShapeTranslate: Sets the creation mode(creation or modification).
SetCrvModLock method in object IgesSettingAtt: Locks or unlocks the Export BSpline mode setting parameter.
SetCurrentAccuracyProfile method in object RobGenericController: Make Accuracy profile with given name as current tool profile being used by controller.
SetCurrentApplicationID method in object SchSession: Set the current application ID.
SetCurrentConstraintSet method in object MoveToPostureActivity
SetCurrentDocument method in object SchSession: Set the current document.
SetCurrentFormat method in object AssemblyConvertor: Defines the properties that will be used in the print method.
SetCurrentMotionProfile method in object RobGenericController: Make Motion profile with given name as current tool profile being used by controller.
SetCurrentObjFrameProfile method in object RobGenericController: Make ObjFrame profile with given name as current ObjFrame profile being used by controller.
SetCurrentObject method in object ManufacturingOutputGenerator: Set current object to buffer.
SetCurrentOccurrence method in object AnalysisImage: Sets occurrence number for an image.
SetCurrentPosLock method in object HtsCCPSettingAtt: Locks or unlocks the CurrentPos parameter.
SetCurrentToolProfile method in object RobGenericController: Make tool profile with given name as current tool profile being used by controller.
SetCurvatureThreshold method in object HybridShapeExtractMulti: Sets the CurvatureThreshold in the list of constraints at specified position.
SetCurvatureThresholdActivity method in object HybridShapeExtractMulti: Sets the CurvatureThresholdActivity in the list of constraints at specified position.
SetCurve method in object HybridShapeBlend: Sets a curve to the blend.
SetCustomBackgroundImageLock method in object AnalysisReportingSettingAtt: Locks or unlocks the CustomBackgroundImage parameter.
SetCustomImageFormatLock method in object AnalysisReportingSettingAtt: Locks or unlocks the CustomImageFormat parameter.
SetCustomImageHeightLock method in object AnalysisReportingSettingAtt: Locks or unlocks the CustomImageHeight parameter.
SetCustomImageWidthLock method in object AnalysisReportingSettingAtt: Locks or unlocks the ImageWidth parameter.
SetCuttingPlane method in object ABQPretensionProperty: Sets the cutting plane for the bolt pretension property.
SetDLName method in object DLNameSettingAtt: Sets the mapping between a logical name and the physical path.
SetDLNameCreationRightLock method in object DLNameSettingAtt: Locks or unlocks the parameter DLNameCreationRight.
SetDLNameLock method in object DLNameSettingAtt: Locks or unlocks the DLName.
SetDMUClashPreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUClashPreview parameter.
SetDMUCut3DPreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUCut3DPreview parameter.
SetDMUDistancePreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUDistancePreview parameter.
SetDMUFreeSpacePreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUFreeSpacePreview parameter.
SetDMUGroupPreviewHiddenObjectsColor method in object N4DNavigatorSettingAtt: Sets the color for the display of hidden objects in DMU Group Preview.
SetDMUGroupPreviewHiddenObjectsColorLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUGroupPreviewHiddenObjectsColor parameter.
SetDMUGroupPreviewHiddenObjectsDisplayModeLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUGroupPreviewHiddenObjectsDisplayMode parameter.
SetDMUGroupPreviewHiddenObjectsLowIntLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUGroupPreviewHiddenObjectsLowInt parameter.
SetDMUGroupPreviewHiddenObjectsOpacityLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUGroupPreviewHiddenObjectsOpacity parameter.
SetDMUGroupPreviewHiddenObjectsPickLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUGroupPreviewHiddenObjectsPick parameter.
SetDMUGroupPreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUGroupPreview parameter.
SetDMUMergerPreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUMergerPreview parameter.
SetDMUOffsetPreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUOffsetPreview parameter.
SetDMUPlayerDeformationLock method in object AnalysisPostProANRSettingAtt: Locks or unlocks the DMUPlayerDeformation parameter.
SetDMUPlayerModeLock method in object AnalysisPostProANRSettingAtt: Locks or unlocks the DMUPlayerMode parameter.
SetDMUReviewNameLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUReviewName parameter.
SetDMUSectionPreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUSectionPreview parameter.
SetDMUShuttlePreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUShuttlePreview parameter.
SetDMUSilhouettePreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUSilhouettePreview parameter.
SetDMUSimplifPreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUSimplifPreview parameter.
SetDMUSweptVolPreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUSweptVolPreview parameter.
SetDMUThicknessPreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUThicknessPreview parameter.
SetDMUVibrationVolPreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUVibrationVolPreview parameter.
SetDMUWrappingPreviewLock method in object N4DNavigatorSettingAtt: Locks or unlocks the DMUWrappingPreview parameter.
SetDNBWINumColumnListLock method in object WorkGeneralSettingAtt
SetDOFActivation method in object ABQDisplacementBC
SetDOFValues method in object DeviceSim: Set the DOF values for the device.
SetDOFValues method in object HomePosition: Set the DOF values for the home position.
SetData method in object Line2D
SetData method in object Point2D
SetData method in object Circle2D
SetData method in object Ellipse2D
SetData method in object Parabola2D
SetData method in object Hyperbola2D
SetDatas method in object Shot: Set the data related to the shot.
SetDatumConnector method in object PspPartConnector: Sets the Datum connector.
SetDedicatedFilterTypeLock method in object Layout2DSettingAtt: Locks or unlocks the DedicatedFilterType parameter.
SetDeepSearchActivationLock method in object SearchSettingAtt: Locks or unlocks the Deep Search Activation setting parameter.
SetDefaultAnalysisFlagLock method in object AnalysisGeneralSettingAtt: Locks or unlocks the flag.
SetDefaultAnalysisTemplateLock method in object AnalysisGeneralSettingAtt: Locks or unlocks the flag.
SetDefaultColorsEditabilityLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "DefaultColorsEditability" parameter.
SetDefaultDiffuseAmbientCoefficientLock method in object VisualizationSettingAtt: Locks or unlocks the DefaultDiffuseAmbientCoefficient setting parameter.
SetDefaultMacroLibraries method in object MacrosSettingAtt: Sets the list of default macro libraries.
SetDefaultMacroLibrariesLock method in object MacrosSettingAtt: Locks or unlocks the default macro libraries setting.
SetDefaultPowerInputContextPriorityLock method in object SearchSettingAtt: Locks or unlocks the Default Power Input Context Priority setting parameter.
SetDefaultPowerInputContextScopeLock method in object SearchSettingAtt: Locks or unlocks the Default Power Input Context Scope setting parameter.
SetDefaultPowerInputPrefixLock method in object SearchSettingAtt: Locks or unlocks the Default Power Input Prefix setting parameter.
SetDefaultShininessLock method in object VisualizationSettingAtt: Locks or unlocks the DefaultShininess setting parameter.
SetDefaultSpecularCoefficientLock method in object VisualizationSettingAtt: Locks or unlocks the DefaultSpecularCoefficient setting parameter.
SetDefaultSpeedLock method in object FittingSettingAtt: Locks or unlocks the DefaultSpeed parameter.
SetDefaultStyleSheetLock method in object FASReportingSettingAtt: Locks or unlocks the "OLP Robot Program Directory" parameter.
SetDefaultTimeLock method in object FittingSettingAtt: Locks or unlocks the DefaultTime parameter.
SetDefaultToleranceLock method in object ToleranceSheetSettingAtt: Locks or unlocks the DefaultTolerance parameter.
SetDefaultWalkSpeedLock method in object HtsGeneralSettingAtt: Locks or unlocks the DefaultWalkSpeed parameter.
SetDefinition method in object PspLightPart: Set the points defining the light object.
SetDegreesOfFreedom method in object ReferenceFrame: Sets the values of Degrees Of Freedom(DOF) [x,y,z,u,v,w].
SetDeleteWarningBoxLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "DeleteWarningBox" parameter.
SetDemoModeLock method in object LicenseSettingAtt: Locks or unlocks the DemoMode setting parameter.
SetDesignModeLock method in object DMUTolSettingAtt: Locks or unlocks the Design Mode setting parameter value.
SetDesignPart method in object ManufacturingSetup: Associates the design part to a Manufacturing Setup.
SetDesignReviewLock method in object Export3DXmlSettingAtt: Locks or unlocks the flag.
SetDesignTablesCopyDataLock method in object KnowledgeSheetSettingAtt: Locks or unlocks the DesignTablesCopyData parameter.
SetDesignTablesSynchronizationLock method in object KnowledgeSheetSettingAtt: Locks or unlocks the DesignTablesSynchronization parameter.
SetDetailingID method in object MHILoadParameters
SetDetailsModeExplodeLock method in object V4V5SpaceSettingAtt: Locks or unlocks the Details Migration Mode setting parameter.
SetDetailsModeUsualLock method in object V4V5SpaceSettingAtt: Locks or unlocks the Details Migration Mode setting parameter.
SetDetailsModeWireframeLock method in object V4V5SpaceSettingAtt: Locks or unlocks the Details Migration Mode setting parameter.
SetDeviation method in object HybridShapeAssemble: Set the deviation value.
SetDimAfterCreLock method in object FTASettingAtt: Locks or unlocks the Dimension After Creaation parameter.
SetDimAfterModLock method in object FTASettingAtt: Locks or unlocks the Dimension After Modification parameter.
SetDimBeforeCreLock method in object FTASettingAtt: Locks or unlocks the Dimension Before Creation parameter.
SetDimBeforeModLock method in object FTASettingAtt: Locks or unlocks the Dimension Before Modification parameter.
SetDimBlankingCreLock method in object FTASettingAtt: Locks or unlocks the Dimension Blanking Creation parameter.
SetDimBlankingModLock method in object FTASettingAtt: Locks or unlocks the Dimension Blanking Modification parameter.
SetDimConfigureSnappingLock method in object FTASettingAtt: Locks or unlocks the DimConfigureSnapping parameter.
SetDimConstantOffsetLock method in object FTASettingAtt: Locks or unlocks the Constant Offset parameter.
SetDimCreateOnLock method in object FTASettingAtt: Locks or unlocks the DimCreateOn parameter.
SetDimLinePosValueLock method in object FTASettingAtt: Locks or unlocks the Dimension Line Position Value parameter.
SetDimLineUpBaseAngleLock method in object FTASettingAtt: Locks or unlocks the Dimension Line Up Base Angle parameter.
SetDimLineUpBaseLengthLock method in object FTASettingAtt: Locks or unlocks the Dimension Line Up Base Length parameter.
SetDimLineUpCumulLock method in object FTASettingAtt: Locks or unlocks the Dimension Line Up Cululated parameter.
SetDimLineUpFunnelLock method in object FTASettingAtt: Locks or unlocks the Dimension Line Up Funnel parameter.
SetDimLineUpOffsetBetDimAngleLock method in object FTASettingAtt: Locks or unlocks the DimLineUpOffsetBetDimAngle parameter.
SetDimLineUpOffsetBetDimLengthLock method in object FTASettingAtt: Locks or unlocks the DimLineUpOffsetBetDimLength parameter.
SetDimLineUpOffsetToRefAngleLock method in object FTASettingAtt: Locks or unlocks the DimLineUpOffsetToRefAngle parameter.
SetDimLineUpOffsetToRefLengthLock method in object FTASettingAtt: Locks or unlocks the DimLineUpOffsetToRefLength parameter.
SetDimLineUpStackLock method in object FTASettingAtt: Locks or unlocks the Dimension Line Up Stack parameter.
SetDimManualPositionningLock method in object FTASettingAtt: Locks or unlocks the Manual Positionning parameter.
SetDimMove2dPartCreLock method in object FTASettingAtt: Locks or unlocks the Dimension Move 2D Creation parameter.
SetDimMove2dPartModLock method in object FTASettingAtt: Locks or unlocks the Dimension Move 2D Modification parameter.
SetDimMoveDimLineCreLock method in object FTASettingAtt: Locks or unlocks the Dimension Move Dimension Line Creation parameter.
SetDimMoveDimLineModLock method in object FTASettingAtt: Locks or unlocks the Dimension Move Dimension Line Modification parameter.
SetDimMoveLeaderCreLock method in object FTASettingAtt: Locks or unlocks the Dimension leader Creation parameter.
SetDimMoveLeaderModLock method in object FTASettingAtt: Locks or unlocks the Dimension leader modification parameter.
SetDimMoveSubPartLock method in object FTASettingAtt: Locks or unlocks the DimMoveSubPart parameter.
SetDimMoveValueCreLock method in object FTASettingAtt: Locks or unlocks the Dimension Move Value Creation parameter.
SetDimMoveValueModLock method in object FTASettingAtt: Locks or unlocks the Dimension Move Value Modification parameter.
SetDimORunCreLock method in object FTASettingAtt: Locks or unlocks the Dimension Over Run Creation parameter.
SetDimORunModLock method in object FTASettingAtt: Locks or unlocks the Dimension Over Run Modification parameter.
SetDimOriDefaultSymbLock method in object FTASettingAtt: Locks or unlocks the Dimension Orientation Default Symbol parameter.
SetDimSnappingLock method in object FTASettingAtt: Locks or unlocks the Dimension Snapping parameter.
SetDimension method in object ArrangementItemReservation: Sets the Dimensions of the ArrangementItemReservation.
SetDimensions method in object BasicComponent: Sets the dimensions of the basic component.
SetDimensionsDisplayLock method in object UnitsSheetSettingAtt: Locks or unlocks the DimensionsDisplay setting parameter.
SetDirect method in object Publications: Valuates a publication object directly with the object it publishes.
SetDirection method in object Hole: Sets the hole associative direction.
SetDirection method in object Prism: Sets the prism associative direction.
SetDirection method in object AssemblyHole: Sets the hole axis direction.
SetDirection method in object AssemblyPocket: Sets the pocket associated direction.
SetDirectoryFile method in object SendToService: Positions the destination directory.
SetDirectoryForInputXslLock method in object ReportGenerationSheetSettingAtt: Locks or unlocks the DirectoryForInputXsl parameter.
SetDirectoryOneFile method in object SendToService: Allows positioning the destination directory for one given file to be copied.
SetDisableAppObjMgtLock method in object CDMASettingAtt: Locks or unlocks the disabling of applicative object management.
SetDisableOverwriteReloadWarnMsgLock method in object CDMASettingAtt: Locks or unlocks the desabling of the overwrite/reload message.
SetDisableShapeRollUpLock method in object MfgHubSettingAtt: Locks or unlocks the DisableShapeRollUp parameter.
SetDisableVPMSaveCommitPanelLock method in object CDMASettingAtt: Locks or unlocks the disabling of VPM Save Commit Panel.
SetDisableVPMSaveReportPanelPanelLock method in object CDMASettingAtt: Locks or unlocks the disabling of VPM Save Report Panel.
SetDisplayAnlStatusLock method in object AnalysisSettingAtt: Locks or unlocks the DisplayAnlStatus parameter.
SetDisplayBackAndCuttingPlaneLock method in object Layout2DSettingAtt: Locks or unlocks the DisplayBackAndCuttingPlane parameter.
SetDisplayClippingOutlineLock method in object Layout2DSettingAtt: Locks or unlocks the DisplayClippingOutline parameter.
SetDisplayCurrentScaleLock method in object VisualizationSettingAtt: Locks or unlocks the SetStereoModeLock setting parameter.
SetDisplayCutInWireframeLock method in object SectioningSettingAtt: Locks or unlocks the DisplayCutInWireframe parameter.
SetDisplayDrillListLock method in object VisualizationSettingAtt: Locks or unlocks the DisplayDrillList setting parameter.
SetDisplayGeomOnScrollingLock method in object TreeVizManipSettingAtt: Locks or unlocks the "display geometry on scrolling" mode.
SetDisplayGeometryAfterCurrentLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "DisplayGeometryAfterCurrent" parameter.
SetDisplayImmersiveDrillViewerLock method in object VisualizationSettingAtt: Locks or unlocks the DisplayImmersiveDrillViewer setting parameter.
SetDisplayModeLock method in object InteropSettingAtt: Retrieves information about the "Display only elements with Sensitive Attribute" setting parameter.
SetDisplayNameModeLock method in object TreeTabSettingAtt: Locks or unlocks the "Display Name Mode" parameter.
SetDisplayOrderLock method in object TreeTabSettingAtt: Locks or unlocks the 'Display Order' parameter.
SetDisplayProcessOrderLock method in object TreeTabSettingAtt: Locks or unlocks the 'Display Order for Processes' parameter.
SetDisplayResetButtonLock method in object DraftingSettingAtt: Locks or unlocks the DisplayResetButton parameter.
SetDisplayTrailingZerosLock method in object UnitsSheetSettingAtt
SetDisplayV4Text3DLock method in object InteropSettingAtt: Locks or unlocks the "Display 3D elements labels" setting parameter.
SetDistanceObjective method in object HybridShapeHealing: Sets the distance objective for healing entity.
SetDistanceStepLock method in object ManipSettingAtt: Locks or unlocks the DistanceStep parameter.
SetDistanceThreshold method in object HybridShapeExtractMulti: Sets the DistanceThreshold in the list of constraints at specified position.
SetDistanceThresholdActivity method in object HybridShapeExtractMulti: Sets the DistanceThresholdActivity in the list of constraints at specified position.
SetDistributionValue method in object AnalysisColorMap
SetDlnameLock method in object InteropSettingAtt: Locks or unlocks the "DLNAME" setting parameter.
SetDocLanguageLock method in object DocumentationSettingAtt: Locks or unlocks the technical documentation language parameter.
SetDocumentContentAtCreationLock method in object FunctionalSystemSettingAtt: Locks or unlocks the DocumentContentAtCreation parameter.
SetDoubleAttribute method in object E5Property
SetDoubleUserAttribute method in object Fastener: et the value of user attribute whoes name matches the input string.
SetDownloaderDirLock method in object IgpOlpSettingAtt: Locks or unlocks the OLP Translator Directory setting parameter.
SetDownloaderLock method in object IgpOlpSettingAtt: Locks or unlocks the OLP Translator setting parameter.
SetDraftFeatureMigrationModeLock method in object SpecV4SettingAtt: Locks or unlocks the DraftFeatureMigrationMode setting parameter.
SetDragDropLock method in object GeneralSessionSettingAtt: Locks or unlocks the drag & drop parameter.
SetDrawLock method in object InteropSettingAtt: Locks or unlocks the "Open in Light Mode: 2D Data are not taken into account" setting parameter.
SetDrawingStandard method in object SchematicRoot: Set the drawing standard.
SetDriverConfigurationPath method in object PrintersSettingAtt: Sets the driver configuration file.
SetDriverConfigurationPathLock method in object PrintersSettingAtt: Locks or unlocks the driver configuration file.
SetDuration method in object Shot: Sets the duration (in terms of distance) associated to a shot.
SetDynamicCullLock method in object VisualizationSettingAtt: Locks or unlocks the DynamicCull setting parameter.
SetDynamicLODLock method in object VisualizationSettingAtt: Locks or unlocks the DynamicLOD setting parameter.
SetEdgeInTessLock method in object StepSettingAtt: Locks or unlocks the EdgeTessMode parameter.
SetEditDedicatedFilterDialogBoxLock method in object Layout2DSettingAtt: Locks or unlocks the EditDedicatedFilterDialogBox parameter.
SetElem method in object HybridShapeTrim: Modifies the trimmed feature at a given index.
SetElemUntil method in object HybridShapeExtrapol
SetElement method in object HybridShapeExtractMulti: Sets the sub element used as init for the propagation.
SetElementProperties method in object ABQGlobalElementAssignment: Sets the behavior and the modifier to given element type.
SetEnableAnlModeLock method in object AnalysisSettingAtt: Locks or unlocks the EnableAnlMode parameter.
SetEnableDirectV5VaultSaveLock method in object CDMASettingAtt: Locks or unlocks the enabling of the direct V5 Vault save.
SetEnableHeartBeatLock method in object RobAnalysisHeartBeatUsageSettingAtt: Locks or unlocks the SingularColor parameter.
SetEndFaceForClosing method in object HybridShapeLoft: Sets a face to the end section from the lofted surface.
SetEndMeridianAngle method in object HybridShapeSphere: Sets EndMeridianAngle on the object.
SetEndParallelAngle method in object HybridShapeSphere: Sets EndParallelAngle on the object.
SetEndParam method in object HybridShapeIntegratedLaw: Sets end parameter.
SetEndPoint method in object SchGRRRoute: Set the end point of the route graphic.
SetEndSectionTangent method in object HybridShapeLoft: Sets a tangent surface to the end section from the lofted surface.
SetEndTangentDirectionFlag method in object HybridShapeConic: Sets the tangent direction orientation at the conic end point.
SetEngineInterfaceLock method in object RenderingSettingAtt: Locks or unlocks the EngineInterface parameter.
SetEnumerateValues method in object IntParam: Sets an array containing the different values that the real param can take in the case of multiple values.
SetEnumerateValues method in object StrParam: Sets an array containing the different values that the StrParam object can take in the case of multiple values.
SetEnumerateValues method in object RealParam: Sets an array containing the different values that the real param can take in the case of multiple values.
SetEnvironmentForVBSLaunch method in object MHIOpenAccess
SetExclusionRegions method in object ABQRigidCoupling: Sets the exclusion regions for the coupling.
SetExclusionRegions method in object ABQSmoothCoupling: Sets the exclusion regions for the coupling.
SetExecLogPathLock method in object PPGExecLogSettingAtt: Locks or unlocks the Xxx parameter.
SetExistingTaskTreatmentLock method in object IgpOlpSettingAtt: Locks or unlocks the OLP Existing Task Treatment On Upload parameter.
SetExpNotationValuesGreaterLock method in object UnitsSheetSettingAtt
SetExpNotationValuesLowerLock method in object UnitsSheetSettingAtt
SetExpandSketchBasedFeaturesNodeAtCreationLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ExpandSketchBasedFeaturesNodeAtCreation" parameter.
SetExplicitPolarity method in object Thread: Sets the thread polarity explicit.
SetExportBackgroundColor method in object VrmlSettingAtt: Sets the ExportBackgroundColor parameter (Background color of exported Vrml files).
SetExportBackgroundColorLock method in object VrmlSettingAtt: Locks or unlocks the ExportBackgroundColor setting parameter.
SetExportBlocksLock method in object DxfSettingAtt: Locks or unlocks the Export Blocks option if the operation is allowed in the current administrated environment.
SetExportDimensionsAsDimensionsLock method in object DxfSettingAtt: Locks or unlocks the Export Dimensions As Dimensions option if the operation is allowed in the current administrated environment.
SetExportEdgesLock method in object VrmlSettingAtt: Locks or unlocks the ExportEdges setting parameter.
SetExportLayerNameLock method in object DxfSettingAtt: Locks or unlocks the Export Layer Name option if the operation is allowed in the current administrated environment.
SetExportMSBOLock method in object IgesSettingAtt: Locks or unlocks the Export Solid Mode setting parameter.
SetExportModeLock method in object Ig2SettingAtt: Locks or unlocks the Export Mode option if the operation is allowed in the current administrated environment.
SetExportModeLock method in object DxfSettingAtt: Locks or unlocks the Export Mode option if the operation is allowed in the current administrated environment.
SetExportNormalsLock method in object VrmlSettingAtt: Locks or unlocks the ExportNormals setting parameter.
SetExportSheetsLock method in object Ig2SettingAtt: Locks or unlocks the Exported Sheets option if the operation is allowed in the current administrated environment.
SetExportSheetsLock method in object DxfSettingAtt: Locks or unlocks the Exported Sheets option if the operation is allowed in the current administrated environment.
SetExportTextureFileLock method in object VrmlSettingAtt: Locks or unlocks the ExportTextureFile setting parameter.
SetExportTextureFormatLock method in object VrmlSettingAtt: Locks or unlocks the ExportTextureFormat setting parameter.
SetExportTextureLock method in object VrmlSettingAtt: Locks or unlocks the ExportTexture setting parameter.
SetExportUnitLock method in object IgesSettingAtt: Locks or unlocks the Export Units setting parameter.
SetExportVersionLock method in object VrmlSettingAtt: Locks or unlocks the ExportVersion setting parameter.
SetExportVersionLock method in object DxfSettingAtt: Locks or unlocks the Export Version option if the operation is allowed in the current administrated environment.
SetExportViewAsViewportLock method in object Ig2SettingAtt: Locks or unlocks the Export Views as Viewports option if the operation is allowed in the current administrated environment.
SetExportViewAsViewportLock method in object DxfSettingAtt: Locks or unlocks the Export Views as Viewports option if the operation is allowed in the current administrated environment.
SetExternalMaxDeformationLock method in object V4V5SpaceSettingAtt: Locks or unlocks the "External Control Point Maximum Deformation" setting parameter.
SetExternalReferences method in object MacrosSettingAtt: Sets the list of external references.
SetExternalReferencesAsVisibleLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ExternalReferencesAsVisible" parameter.
SetExternalReferencesAssemblyRootContextLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ExternalReferencesAssemblyRootContext" parameter.
SetExternalReferencesLock method in object MacrosSettingAtt: Locks or unlocks the external references setting.
SetExternalReferencesNodeInTreeLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ExternalReferencesNodeInTree" parameter.
SetExternalTypeDeformationLock method in object V4V5SpaceSettingAtt: Locks or unlocks the activation mode with external deformation (Gap Healing).
SetExtremities method in object FunctActionsGroup: Set coordinates of Input and Output extremities.
SetExtremityFromCoordinates method in object StrMemberExtremity: Modifies the coordinates of the extremity defined by a point.
SetFaceConnector method in object PspPartConnector: Sets Face connector.
SetFaceHLDrillLock method in object VisualizationSettingAtt: Locks or unlocks the FaceHLDrill setting parameter.
SetFakeDimValue method in object DrawingDimValue: Set fake value of dimension value.
SetFeature method in object ManufacturingOperation: Associate a Machinable Feature to a Manufacturing Operation.
SetFederationPropagation method in object HybridShapeAssemble: Sets the propagation mode of federation.
SetFeedSpeedAutoUpdate method in object ManufacturingOperation: Set the Auto Update status for Feed Rate or Spindle Speed.
SetFeedrate method in object ManufacturingToolMotion: Defines the feedrate of a Manufacturing Point to point ToolMotion.
SetFeedrateMagnitude method in object ManufacturingOperation: Defines the magnitude of the feedrate values.
SetField method in object Roughness: Set roughness field.
SetFilters method in object MHILoadParameters: Specifies the filters to be applied while loading the project.
SetFinishSymbol method in object DrawingWelding: Sets the finish symbol of the drawing welding.
SetFirstActLock method in object HtsCCPSettingAtt: Locks or unlocks the FirstAct parameter.
SetFirstAngleLaw method in object HybridShapeSweepCircle: Sets the first angle law useful in some circular sweep types.
SetFirstDirection method in object RectPattern: Sets the first repartition direction.
SetFirstLengthDefinitionType method in object HybridShapeSweepLine: Sets the first length definition type.
SetFirstLengthLaw method in object HybridShapeSweepLine: Sets the first length law useful in some linear sweep types.
SetFitAllInSheetFormatLock method in object Layout2DSettingAtt: Locks or unlocks the FitAllInSheetFormat parameter.
SetFittingPoints method in object HybridShapeSweepExplicit: Sets the fitting points.
SetFlag method in object DNBFastenerNewMfgPosServices: flags a specified DELMIAFastener to create a new manufacturing fastener in its place.
SetFlagOnFasteners method in object DNBFastenerNewMfgPosServices: flags a list of DELMIAFasteners to create new manufacturing fasteners in their place.
SetFlyByMode method in object GenericAccuracyProfile: Switch On/Off Flyby mode.
SetFlyCollisionModeLock method in object VisualizationSettingAtt: Locks or unlocks the FlyCollisionMode setting parameter.
SetFlyCollisionSphereRadiusLock method in object VisualizationSettingAtt: Locks or unlocks the FlyCollisionSphereRadius setting parameter.
SetFlyCollisionTypeLock method in object VisualizationSettingAtt: Locks or unlocks the FlyCollisionType setting parameter.
SetFlySensitivityLock method in object VisualizationSettingAtt: Locks or unlocks the FlySensitivity setting parameter.
SetFlySpeedLock method in object VisualizationSettingAtt: Locks or unlocks the FlySpeed setting parameter.
SetFlySpeedModeLock method in object VisualizationSettingAtt: Locks or unlocks the FlySpeedMode setting parameter.
SetFollowGroundAltitudeLock method in object VisualizationSettingAtt: Locks or unlocks the FollowGroundAltitude setting parameter.
SetFollowGroundModeLock method in object VisualizationSettingAtt: Locks or unlocks the FollowGroundMode setting parameter.
SetFontName method in object DrawingText: Sets the font size on a substring of the drawing text.
SetFontSize method in object DrawingText: Sets the font size on a substring of the drawing text.
SetForbidInconsistentSaveLock method in object CDMASettingAtt: Locks or unlocks the enabling of forbidding inconsistent save.
SetForceClearanceVoxelLock method in object N4DNavigatorSettingAtt: Locks or unlocks the ForceClearanceVoxel parameter.
SetForceVoxelLock method in object N4DNavigatorSettingAtt: Locks or unlocks the ForceVoxel parameter.
SetFormatDisplayFactor method in object DrawingDimValue: Set format display factor of dimension value.
SetFormatMode method in object GeneralStatisticsSettingAtt: Sets the format mode of the statistics thematic.
SetFormatName method in object DrawingDimValue: Set format name of dimension value.
SetFormatPrecision method in object DrawingDimValue: Set format precision of dimension value.
SetFormatType method in object DrawingDimValue: Set format type of dimension value.
SetFormatUnit method in object DrawingDimValue: Set format unit of dimension value.
SetFrame method in object ReferenceFrame: Set Frame of the TPS.
SetFreeEdge method in object SfmStiffenerOnFreeEdge: Sets the Free Edge.
SetFrequencyLock method in object LicenseSettingAtt: Locks or unlocks the Frequency setting parameter.
SetFullSceneAntiAliasingModeLock method in object VisualizationSettingAtt: Locks or unlocks the AntiAliasingMode setting parameter.
SetFunctionalActionPresentationLock method in object FunctionalSystemSettingAtt: Locks or unlocks the FunctionalActionPresentation parameter.
SetFunnel method in object DrawingDimExtLine: Set funnel infomation of dimension extension line.
SetGFBDILock method in object CDMASettingAtt: Locks or unlocks the enabling of generic FBDI.
SetGPSName method in object DrawingViewGenerativeBehavior: Applies a set of generative parameters to the current view.
SetGRRName method in object SchGRR: Set current name of the GRR.
SetGap method in object DrawingDimExtLine: Set gap of dimension extension line.
SetGap method in object SchGapDisplay: Add gap display attributes on the route.
SetGenExecLogLock method in object PPGExecLogSettingAtt
SetGeneralTolClassLock method in object FTASettingAtt: Locks or unlocks the Dimension general class parameter.
SetGeometries method in object ManufacturingPrismaticMachiningArea: Sets or adds geometry in a collection of a specified type to a Manufacturing Prismatic Machining Area.
SetGeometry method in object ManufacturingOperation: Assigns geometry to a Manufacturing Operation.
SetGeometry method in object ManufacturingSurfaceGeomArea: Sets a geometry of a Manufacturing Surface NCGeometry feature.
SetGeometry method in object ManufacturingPrismaticMachiningArea: Sets a geometry of a specified type to a Manufacturing Prismatic Machining Area.
SetGeometryOnSupport method in object HybridShapeCircleCtrPt: Sets GeometryOnSupport of circle.
SetGeometryOnSupport method in object HybridShapeCircleCtrRad: Sets GeometryOnSupport of circle.
SetGeometryOnSupport method in object HybridShapeCircle2PointsRad: Sets GeometryOnSupport of circle.
SetGeometryRepresentationFormatLock method in object Export3DXmlSettingAtt: Locks or unlocks the flag.
SetGlobalSpecification method in object AnalysisMeshPart: Sets the value corresponding to the given global specification.
SetGotoPtPointCoordinates method in object ManufacturingToolMotion: Defines coordinates on the ToolMotion.
SetGravityAxisLock method in object VisualizationSettingAtt: Locks or unlocks the GravityAxis setting parameter.
SetGravityLock method in object VisualizationSettingAtt: Locks or unlocks the Gravity setting parameter.
SetGridAutoFilteringLock method in object SectioningSettingAtt: Locks or unlocks the GridAutoFiltering parameter.
SetGridAutoResizeLock method in object SectioningSettingAtt: Locks or unlocks the GridAutoResize parameter.
SetGridDisplayLock method in object FTAInfraSettingAtt: Locks or unlocks the Grid Display setting parameter value.
SetGridHeightStepLock method in object SectioningSettingAtt: Locks or unlocks the GridHeightStep parameter.
SetGridPositionModeLock method in object SectioningSettingAtt: Locks or unlocks the GridPositionMode parameter.
SetGridPrimarySpacingLock method in object FTAInfraSettingAtt: Locks or unlocks the Grid Primary Spacing setting parameter value.
SetGridSecondaryStepLock method in object FTAInfraSettingAtt: Locks or unlocks the Grid Secondary Step setting parameter value.
SetGridSnapPointLock method in object FTAInfraSettingAtt: Locks or unlocks the Grid Snap Point setting parameter value.
SetGridStyleLock method in object SectioningSettingAtt: Locks or unlocks the GridStyle parameter.
SetGridVPrimarySpacingLock method in object FTAInfraSettingAtt: Locks or unlocks the GridV Primary Spacing setting parameter value.
SetGridVSecondaryStepLock method in object FTAInfraSettingAtt: Locks or unlocks the GridV Secondary Step setting parameter value.
SetGridWidthStepLock method in object SectioningSettingAtt: Locks or unlocks the GridWidthStep parameter.
SetGuideDeviation method in object HybridShapeSweepLine: Sets the deviation value (length) from guide curves allowed during sweeping operation in order to smooth it.
SetGuideDeviation method in object HybridShapeSweepConic: Sets deviation value (length) from guide curves allowed during sweeping operation in order to smooth it.
SetGuideDeviation method in object HybridShapeSweepCircle: Sets the deviation value (length) from guide curves allowed during sweeping operation in order to smooth it.
SetGuideDeviation method in object HybridShapeSweepExplicit: Sets deviation value (length) from guide curves allowed during sweeping.
SetHaloModeLock method in object VisualizationSettingAtt: Locks or unlocks the HaloMode setting parameter.
SetHandler method in object ABQRigidCoupling: Sets the handler for the coupling.
SetHandler method in object ABQSmoothCoupling: Sets the handler for the coupling.
SetHandler method in object ABQConcentratedForce: Sets the handler for the distributed load.
SetHandler method in object ABQRigidBodyConstraint: Set the handler for the rigid body.
SetHandler method in object ABQAnalyticalRigidSurface: Set the handler for the Analytical rigid surface.
SetHandlerFromPublication method in object ABQRigidCoupling: Sets the handler for the coupling.
SetHandlerFromPublication method in object ABQSmoothCoupling: Sets the handler for the coupling.
SetHandlerFromPublication method in object ABQRigidBodyConstraint: Sets the handler for the Rigid body constraint.
SetHandlerFromPublication method in object ABQAnalyticalRigidSurface: Sets the handler for the Analytical rigid surface.
SetHandlesRGB method in object VisualizationSettingAtt: Sets the HandlesRGB parameter.
SetHandlesRGBLock method in object VisualizationSettingAtt: Locks or unlocks the HandlesRGB setting parameter.
SetHealingMode method in object HybridShapeAssemble: Sets the healing mode for merged cells.
SetHeight method in object HybridShapeHelix: Sets the helix height.
SetHeightAndWidth method in object FunctNodeGraphLayout: Sets the height and width.
SetHideIn3DLock method in object Layout2DSettingAtt: Locks or unlocks the HideIn3D parameter.
SetHidePlaneLock method in object SectioningSettingAtt: Locks or unlocks the HidePlane parameter.
SetHideResultLock method in object SectioningSettingAtt: Locks or unlocks the HideResult parameter.
SetHighlightDefAnnotLock method in object FTASettingAtt: Locks or unlocks the Highlight Def Annot parameter.
SetHomePosition method in object BasicDevice: Set home position of the device.
SetHybridDesignModeLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "HybridDesignMode" parameter.
SetHyperLinks method in object WIText
SetID method in object PspID: Sets ID for the object.
SetIDUniqueSetting method in object LibTabSettingAtt
SetIDUniqueSettingLock method in object LibTabSettingAtt: Locks or unlocks the "Unique Check" parameter.
SetIcon method in object PertNode
SetIdentifier method in object AnalysisGlobalSensor: Sets the Physical type and sub physical type that will be computed by the sensor.
SetImageQualityModeLock method in object AnalysisReportingSettingAtt: Locks or unlocks the ImageQualityMode parameter.
SetImageTextSizeLock method in object AnalysisPostProSettingAtt: Locks or unlocks the ImageTextSize parameter.
SetImageTextStackingLock method in object AnalysisPostProSettingAtt: Locks or unlocks the ImageTextStacking parameter.
SetImpliedResourceFilterLock method in object VerifTabSettingAtt: Locks or unlocks the Xxx parameter.
SetImportAnnotationLock method in object ImportD5SettingAtt: Locks or unlocks the ImportAnnotation parameter.
SetImportBaseFrmLock method in object ImportD5SettingAtt: Locks or unlocks the ImportBaseFrm parameter.
SetImportCollisionLock method in object ImportD5SettingAtt: Locks or unlocks the ImportCollision parameter.
SetImportConfigFileLock method in object ImportD5SettingAtt: Locks or unlocks the ImportConfigFile parameter.
SetImportCoorsysLock method in object ImportD5SettingAtt: Locks or unlocks the ImportCoorsys parameter.
SetImportCreaseAngleLock method in object VrmlSettingAtt: Locks or unlocks the ImportCreaseAngle setting parameter.
SetImportDestinationViewLock method in object Ig2SettingAtt: Locks or unlocks the import destination view if the operation is allowed in the current administrated environment.
SetImportDftStandardLock method in object Ig2SettingAtt: Locks or unlocks the Drafting standard option if the operation is allowed in the current administrated environment.
SetImportDftStandardLock method in object DxfSettingAtt: Locks or unlocks the Drafting standard option if the operation is allowed in the current administrated environment.
SetImportDimensionsLock method in object Ig2SettingAtt: Locks or unlocks the Import dimensions option if the operation is allowed in the current administrated environment.
SetImportDimensionsLock method in object DxfSettingAtt: Locks or unlocks the Import dimensions option if the operation is allowed in the current administrated environment.
SetImportDxfStandardLock method in object DxfSettingAtt: Locks or unlocks the DXF standard option if the operation is allowed in the current administrated environment.
SetImportEdgeLock method in object ImportD5SettingAtt: Locks or unlocks the ImportEdge parameter.
SetImportEndPointsLock method in object Ig2SettingAtt: Locks or unlocks the Create End Points option if the operation is allowed in the current administrated environment.
SetImportEndPointsLock method in object DxfSettingAtt: Locks or unlocks the Create End Points option if the operation is allowed in the current administrated environment.
SetImportFloorLock method in object ImportD5SettingAtt: Locks or unlocks the ImportFloor parameter.
SetImportGroupAsSelSetLock method in object IgesSettingAtt: Locks or unlocks the Import Selection Set mode setting parameter.
SetImportKeepModelSpaceLock method in object DxfSettingAtt: Locks or unlocks the Keep Model Space option if the operation is allowed in the current administrated environment.
SetImportLibraryLock method in object ImportD5SettingAtt: Locks or unlocks the ImportLibrary parameter.
SetImportMapLayerOn2DLLock method in object DxfSettingAtt: Locks or unlocks Map on Layer2DL option if the operation is allowed in the current administrated environment.
SetImportPDBCacheLock method in object ImportD5SettingAtt: Locks or unlocks the ImportPDBCache parameter.
SetImportPaperSpacesInBackgroundLock method in object DxfSettingAtt: Locks or unlocks the Paper Spaces in Background option if the operation is allowed in the current administrated environment.
SetImportRecordingLock method in object ImportD5SettingAtt: Locks or unlocks the ImportRecording parameter.
SetImportScaleDenominatorLock method in object DxfSettingAtt: Locks or unlocks the scale factor's denominator value option if the operation is allowed in the current administrated environment.
SetImportScaleNumeratorLock method in object DxfSettingAtt: Locks or unlocks the scale factor's numerator value option if the operation is allowed in the current administrated environment.
SetImportToolFrmLock method in object ImportD5SettingAtt: Locks or unlocks the ImportToolFrm parameter.
SetImportUnitLock method in object VrmlSettingAtt: Locks or unlocks the ImportLock setting parameter.
SetImportUnitLock method in object Ig2SettingAtt: Locks or unlocks the import unit option if the operation is allowed in the current administrated environment.
SetImportUnitLock method in object DxfSettingAtt: Locks or unlocks the import unit option if the operation is allowed in the current administrated environment.
SetImportUserAttrLock method in object ImportD5SettingAtt: Locks or unlocks the ImportUserAttr parameter.
SetImportUserViewsLock method in object ImportD5SettingAtt: Locks or unlocks the ImportUserViews parameter.
SetImportWclMessageLock method in object ImportD5SettingAtt: Locks or unlocks the ImportWclMessage parameter.
SetImportWclPathLock method in object ImportD5SettingAtt: Locks or unlocks the ImportWclPath parameter.
SetInactivityDurationLock method in object DisconnectionSettingAtt: Locks or unlocks the inactivity duration.
SetIncrementOrModeNumber method in object ABQSolutionStep: Sets increment number for an image.
SetInertia method in object GenericToolProfile: Set the underlying coefficient of the tool inertia.
SetInitialFile method in object SendToService: Sets the initial file to be copied.
SetInitial_Model_File_PathLock method in object V4WritingSettingAtt: Locks or unlocks the Initial_Model_File_Path setting parameter.
SetInsertLevelLock method in object N4DNavigatorSettingAtt: Locks or unlocks the InsertMode parameter.
SetInsertModeLock method in object N4DNavigatorSettingAtt: Locks or unlocks the InsertMode parameter.
SetInstanceAngularSpacing method in object CircPattern: Sets the InstanceAngularSpacing.
SetInstanceSpacing method in object RectPattern: Sets the InstanceSpacing.
SetInsureFilterNamesUniquenessLock method in object Layout2DSettingAtt: Locks or unlocks the InsureFilterNamesUniqueness parameter.
SetInsureSheetNamesUniquenessLock method in object Layout2DSettingAtt: Locks or unlocks the InsureSheetNamesUniqueness parameter.
SetInsureViewNamesUniquenessLock method in object Layout2DSettingAtt: Locks or unlocks InsureViewNamesUniqueness parameter.
SetInsureViewNamesUniquenessScopeLock method in object Layout2DSettingAtt: Locks or unlocks the InsureViewNamesUniquenessScope parameter.
SetIntUserAttribute method in object Fastener
SetIntermediatePoint method in object HybridShapeConic: Sets one of the conic intermediate passing points.
SetIntermediateTangent method in object HybridShapeConic: Sets the tangent direction at one of the conic intermediate passing points.
SetIntermediateTangentDirectionFlag method in object HybridShapeConic: Sets the tangent direction orientation of one of the conic intermediate points.
SetInternalMaxDeformationLock method in object V4V5SpaceSettingAtt: Locks or unlocks the "Internal Control Point Maximum Deformation" setting parameter.
SetInternalTypeDeformationLock method in object V4V5SpaceSettingAtt: Locks or unlocks the activation mode with internal deformation (Curve Improvement).
SetIsFederated method in object HybridShapeExtractMulti: Sets the IsFederated flag checked/unchecked in the list of constraints at specified position.
SetIsoparGenerationModeLock method in object VisualizationSettingAtt: Locks or unlocks the IsoparGenerationMode setting parameter.
SetIssueRepositoryPathLock method in object MfgHubSettingAtt: Locks or unlocks the IssueRepositoryPath parameter.
SetItemToCopy method in object ManufacturingPattern: Sets the feature to be copied.
SetItemsFilterLock method in object TreeTabSettingAtt: Locks or unlocks the 'Items Folder' parameter.
SetItemsPerRelationFilterLock method in object TreeTabSettingAtt: Locks or unlocks the 'Items Folde(Per Relation Type)r' parameter.
SetJavaClassPathLock method in object IgpOlpSettingAtt: Locks or unlocks the OLP Java Class Path parameter.
SetJavaClassPathLock method in object FASReportingSettingAtt: Locks or unlocks the "Java Class Path" parameter.
SetJavaExeLock method in object IgpOlpSettingAtt: Locks or unlocks the OLP Java Executable parameter.
SetJavaExeLock method in object FASReportingSettingAtt: Locks or unlocks the "Java Executable" parameter.
SetJointRelationExpression method in object DeviceJointRelations: Set Kin expression for the given Joint.
SetJointTarget method in object RobotMotion: Sets the Robot Joint target.
SetJointValues method in object MoveToPostureActivity: Sets the Manikin's Position and Posture values with 137 doubles.
SetKeepAngleOption method in object Sweep: Actives KeepAngleOption.
SetKeepSegmentationLock method in object V4V5SpaceSettingAtt: Locks or unlocks the KeepSegmentation setting parameter.
SetKeyboardRotationAngleValueLock method in object VisualizationSettingAtt: Locks or unlocks the KeyboardRotationAngleValue setting parameter.
SetKnowledgeBuildPathDirectoryLock method in object LanguageSheetSettingAtt: Locks or unlocks the CATKnowledgeBuildPath setting parameter.
SetKnowledgeInHybridDesignModeLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "KnowledgeInHybridDesignMode" parameter.
SetLODModeLock method in object CacheSettingAtt: Locks or unlocks the LOD generation mode.
SetLabelCode method in object SchFrameInfo: Set the frame label code.
SetLabelColor method in object MeasureSettingAtt: Sets the LabelColor parameter.
SetLabelColorLock method in object MeasureSettingAtt: Locks or unlocks the LabelColor parameter.
SetLanguageEditor method in object MacrosSettingAtt: Sets the editor path for the specified language.
SetLanguageEditorLock method in object MacrosSettingAtt: Locks or unlocks the language editors setting.
SetLastActLock method in object HtsCCPSettingAtt: Locks or unlocks the LastAct parameter.
SetLastObjectToGenerate method in object ManufacturingGeneratorData: Sets the last Activity to generate.
SetLayer method in object VisPropertySet: Sets the layer for the current selection.
SetLayer_for_No_AssoLock method in object V4WritingSettingAtt: Locks or unlocks the Layer_for_No_Asso setting parameter.
SetLayoutDefaultRenderStyleLock method in object Layout2DSettingAtt: Locks or unlocks the default render style parameter.
SetLeaderAssociativityLock method in object FTAInfraSettingAtt: Locks or unlocks the Leader Associativity setting parameter value.
SetLegendsVisibility method in object TCPTrace: Get the TCP trace component (DNBTCPTraceReps) legend visibility status.
SetLength method in object HybridShapeExtrapol: Do not use this method.
SetLength method in object HybridShapeSweepLine: Sets the linear values useful in some linear sweep types.
SetLengthD method in object HybridShapeExtrapol
SetLengthLawTypes method in object HybridShapeSweepLine: Sets length law types.
SetLengthMaxToleranceLock method in object ToleranceSheetSettingAtt: Locks or unlocks the LengthMaxTolerance parameter.
SetLengthMinToleranceLock method in object ToleranceSheetSettingAtt: Locks or unlocks the LengthMinTolerance parameter.
SetLengthType method in object HybridShapeLinePtPt: Sets the length type Default is 0.
SetLengthType method in object HybridShapeLinePtDir: Sets the length type Default is 0.
SetLengthType method in object HybridShapeLineAngle: Sets the length type Default is 0.
SetLengthType method in object HybridShapeLineNormal: Sets the length type Default is 0.
SetLengthType method in object HybridShapeLineTangency: Sets the length type Default is 0.
SetLengthType method in object HybridShapeLineBiTangent: Sets the length type Default is 0.
SetLengthType method in object HybridShapeLineBisecting: Sets the length type Default is 0.
SetLicense method in object LicenseSettingAtt: Sets the License.
SetLicenseLock method in object LicenseSettingAtt: Locks or unlocks the License setting parameter.
SetLicenseLock method in object DynLicenseSettingAtt: Locks or unlocks the License setting parameter.
SetLicensesListLock method in object LicenseSettingAtt: Locks or unlocks the LicensesList setting parameter.
SetLicensesListLock method in object DynLicenseSettingAtt: Locks or unlocks the LicensesList setting parameter.
SetLightViewerModeLock method in object VisualizationSettingAtt: Locks or unlocks the LightViewerMode setting parameter.
SetLimitType method in object HybridShapeExtrapol
SetLimitation method in object HybridShapeCircle: Set the circle limitation type.
SetLimitsToMatchBestPrefAngle method in object SWKDOF: Set the angular limitations to match with the best pref angle.
SetLinAccelColorLock method in object RobAnalysisSettingAtt: Locks or unlocks the LinAccelColor parameter.
SetLinAccelLimitLock method in object RobAnalysisSettingAtt: Locks or unlocks the LinAccelLimit parameter.
SetLinSpeedColorLock method in object RobAnalysisSettingAtt: Locks or unlocks the LinSpeedColor parameter.
SetLinSpeedLimitLock method in object RobAnalysisSettingAtt: Locks or unlocks the LinSpeedLimit parameter.
SetLineColor method in object TCPTraceActivity: Indicates the line Color property of trace.
SetLineThickness method in object TCPTraceActivity: Indicates the line thickness property of trace.
SetLineType method in object TCPTraceActivity: Indicates the line type property of trace.
SetLineWidthLock method in object MeasureSettingAtt: Locks or unlocks the LineWidth parameter.
SetLinearDamping method in object ABQDamperConnectionProperty: Sets the linear damping value of the Damper given the degree of freedom.
SetLinearStiffness method in object ABQSpringConnectionProperty: Sets the linear stiffness of the spring given the degree of freedom.
SetLineicCgrModeLock method in object VisualizationSettingAtt: Locks or unlocks the v setting parameter.
SetLinkModeLock method in object MultiCADSettingAtt: Locks or unlocks the LinkMode parameter.
SetLinkSendModeLock method in object MfgHubSettingAtt: Locks or unlocks the LinkSendMode parameter.
SetLinkedExternalReferencesLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "LinkedExternalReferences" parameter.
SetLinkedExternalReferencesOnlyOnPublicationLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "LinkedExternalReferencesOnlyOnPublication" parameter.
SetLinkedExternalReferencesWarningAtCreationLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "LinkedExternalReferencesWarningAtCreation" parameter.
SetListOfLibraryFilePathLock method in object LibTabSettingAtt: Locks or unlocks the list of libraries to be used Role:Locks or unlocks the "list of libraries" parameter if it is possible in the current administrative context.
SetListOfMagnitudesLock method in object UnitsSheetSettingAtt: Locks or unlocks the ListOfMagnitudes setting parameter.
SetListOfPackagesToLoadLock method in object LanguageSheetSettingAtt: Locks or unlocks the ListOfPackagesToLoad setting parameter.
SetLoad3dStateAndPosLock method in object MfgHubSettingAtt: Locks or unlocks the Load3dStateAndPos parameter.
SetLoadAllChildProcMfgCtxLock method in object MfgHubSettingAtt: Locks or unlocks the LoadAllChildProcMfgCtx parameter.
SetLoadAllPackagesLock method in object LanguageSheetSettingAtt: Locks or unlocks the LoadAllPackages setting parameter.
SetLoadAllVPMPropertiesLock method in object CDMASettingAtt: Locks or unlocks the Load Of All VPM Properties status.
SetLoadAssocPrdResChildLock method in object MfgHubSettingAtt: Locks or unlocks the LoadAssocPrdResChild parameter.
SetLoadChildProcMfgCtxLock method in object MfgHubSettingAtt: Locks or unlocks the LoadChildProcMfgCtx parameter.
SetLoadCtxWithFileGeometryLock method in object MfgHubSettingAtt: Locks or unlocks the LoadCtxWithFileGeometry parameter.
SetLoadDispMfgCtxLock method in object MfgHubSettingAtt: Locks or unlocks the LoadDispMfgCtx parameter.
SetLoadDuplicatesInContextTreeChkBLock method in object MfgHubSettingAtt: Locks or unlocks the LoadDuplicatesChkB parameter.
SetLoadENVGeomFromENVdbLock method in object MfgHubSettingAtt: Locks or unlocks the LoadENVGeomFromENVdb parameter.
SetLoadExtendedLanguageLibLock method in object LanguageSheetSettingAtt: Locks or unlocks the LoadExtendedLanguageLib setting parameter.
SetLoadFeedProcMfgCtxLock method in object MfgHubSettingAtt: Locks or unlocks the SaveV5CalcTime parameter.
SetLoadMfgAssmblyLock method in object MfgHubSettingAtt: Locks or unlocks the LoadMfgAssmbly parameter.
SetLoadMfgKitsLock method in object MfgHubSettingAtt: Locks or unlocks the LoadMfgKits parameter.
SetLoadPSSDataLock method in object MfgHubSettingAtt: Locks or unlocks the LoadPSSData parameter.
SetLoadPrdResUserAttribsLock method in object MfgHubSettingAtt: Locks or unlocks the LoadPrdResUserAttribs parameter.
SetLoadResGeoLock method in object MfgHubSettingAtt: Locks or unlocks the LoadResGeo parameter.
SetLoadUnconstrainedMfgCtxLock method in object MfgHubSettingAtt: Locks or unlocks the LoadUnconstrainedMfgCtx parameter.
SetLocalCsysFromPublication method in object ABQGravity: Sets the published local coordinate system of the gravity load.
SetLocalCsysFromPublication method in object ABQRigidCoupling: Sets the published local coordinate system for the coupling.
SetLocalCsysFromPublication method in object ABQDisplacementBC: Sets the published local coordinate system of the Displacement BC.
SetLocalCsysFromPublication method in object ABQSmoothCoupling: Sets the published local coordinate system for the coupling.
SetLocalCsysFromPublication method in object ABQConcentratedForce: Sets the published local coordinate system of the concentrated force.
SetLocalPathLock method in object CacheSettingAtt: Locks or unlocks the cache local path parameter.
SetLocalToolAxis method in object ManufacturingPattern: Sets a local tool axis to a point of a Manufacturing Pattern.
SetLocation method in object PertNode: This method place the PertNode in the PERT Chart at any location by specifying the X and Y Coordinates in the Grid.
SetLockAssignedPrdOnLoadLock method in object MfgHubSettingAtt: Locks or unlocks the LockAssignedPrdOnLoad parameter.
SetLockUserDefaultLock method in object DraftingSettingAtt: Locks or unlocks the LockUserDefault parameter.
SetLogicalActFilterLock method in object TreeTabSettingAtt: Locks or unlocks the "Logical Activities" parameter.
SetLogicalDataAttrListLock method in object PlugMapViewSettingAtt: Locks or unlocks the LogicalDataAttrList parameter.
SetLongAttribute method in object E5Property
SetLongitudinalRelimiters method in object HybridShapeSweepLine
SetLongitudinalRelimiters method in object HybridShapeSweepConic
SetLongitudinalRelimiters method in object HybridShapeSweepCircle
SetLongitudinalRelimiters method in object HybridShapeSweepExplicit
SetMTPActColorLock method in object HtsTaskDisplaySettingAtt: Locks or unlocks the MTPActColor parameter.
SetMTPActSymbolLock method in object HtsTaskDisplaySettingAtt: Locks or unlocks the MTPActSymbol parameter.
SetMachiningDirection method in object ManufacturingActivity: Defines the Machining Direction coordinates of a Manufacturing Operation.
SetMagnitudeValues method in object UnitsSheetSettingAtt: Sets the Magnitude parameters.
SetMailClientLaunchModeLock method in object MfgHubSettingAtt: Locks or unlocks the MailClientLaunchMode parameter.
SetManRefSizLock method in object FTAInfraSettingAtt: Locks or unlocks the Manipulator Reference Size setting parameter value.
SetManZooCapLock method in object FTAInfraSettingAtt: Locks or unlocks the Manipulator Zoom Capability setting parameter value.
SetManifold method in object HybridShapeAssemble: Set the manifold checker flag.
SetManipAutoInsertLock method in object ManipSettingAtt: Locks or unlocks the ManipAutoInsert parameter.
SetManualCacheCleaningLock method in object CDMASettingAtt: Locks or unlocks the manual cache cleaning activation.
SetMappingFileLock method in object CDMASettingAtt: Locks or unlocks the mapping file.
SetMapping_File_Save_ModeLock method in object MigrBatchSettingAtt: Locks or unlocks the "Mapping Files Location for Saving" setting parameter.
SetMapping_Saving_FileLock method in object MigrBatchSettingAtt: Locks or unlocks the "Specified Directory" setting parameter.
SetMarker2DAutoNamingLock method in object MarkerSettingAtt: Locks or unlocks the Marker2DAutoNaming parameter.
SetMarker2DAutoNamingLock method in object N4DNavigatorSettingAtt
SetMarker3DAutoNamingLock method in object MarkerSettingAtt: Locks or unlocks the Marker3DAutoNaming parameter.
SetMarker3DAutoNamingLock method in object N4DNavigatorSettingAtt
SetMarkerAutoUpdateLock method in object N4DNavigatorSettingAtt: Locks or unlocks the MarkerAutoUpdate parameter.
SetMarkerDefaultsColor method in object MarkerSettingAtt
SetMarkerDefaultsColor method in object N4DNavigatorSettingAtt
SetMarkerDefaultsColorLock method in object MarkerSettingAtt: Locks or unlocks the MarkerDefaultsColor parameter.
SetMarkerDefaultsColorLock method in object N4DNavigatorSettingAtt
SetMarkerDefaultsDashedLock method in object MarkerSettingAtt: Locks or unlocks the MarkerDefaultsDashed parameter.
SetMarkerDefaultsDashedLock method in object N4DNavigatorSettingAtt
SetMarkerDefaultsFontLock method in object N4DNavigatorSettingAtt
SetMarkerDefaultsSizeLock method in object N4DNavigatorSettingAtt
SetMarkerDefaultsWeightLock method in object MarkerSettingAtt: Locks or unlocks the MarkerDefaultsWeight parameter.
SetMarkerDefaultsWeightLock method in object N4DNavigatorSettingAtt
SetMarkerTextColor method in object N4DNavigatorSettingAtt
SetMarkerTextColor2D method in object MarkerSettingAtt: Sets the default color of a 2D text annotation (iRed, iGreen, iBlue: RGB values for the desired color).
SetMarkerTextColor2DLock method in object MarkerSettingAtt: Locks or unlocks the MarkerTextColor2D parameter.
SetMarkerTextColor3D method in object MarkerSettingAtt: Sets the default color of a 3D text annotation (iRed, iGreen, iBlue: RGB values for the desired color).
SetMarkerTextColor3DLock method in object MarkerSettingAtt: Locks or unlocks the MarkerTextColor3D parameter.
SetMarkerTextColorLock method in object N4DNavigatorSettingAtt
SetMarkerTextDashed2DLock method in object MarkerSettingAtt: Locks or unlocks the MarkerTextDashed parameter.
SetMarkerTextDashed3DLock method in object MarkerSettingAtt: Locks or unlocks the MarkerTextDashed3D parameter.
SetMarkerTextDashedLock method in object N4DNavigatorSettingAtt
SetMarkerTextDefaultsFont2DLock method in object MarkerSettingAtt: Locks or unlocks the MarkerDefaultsFont2D parameter.
SetMarkerTextDefaultsFont3DLock method in object MarkerSettingAtt: Locks or unlocks the MarkerDefaultsFont3D parameter.
SetMarkerTextDefaultsSize2DLock method in object MarkerSettingAtt: Locks or unlocks the MarkerDefaultsSize2D parameter.
SetMarkerTextDefaultsSize3DLock method in object MarkerSettingAtt: Locks or unlocks the MarkerDefaultsSize3D parameter.
SetMarkerTextWeight2DLock method in object MarkerSettingAtt: Locks or unlocks the MarkerTextWeight2D parameter.
SetMarkerTextWeight3DLock method in object MarkerSettingAtt: Locks or unlocks the MarkerTextWeight3D parameter.
SetMarkerTextWeightLock method in object N4DNavigatorSettingAtt
SetMass method in object GenericToolProfile: Set tool mass.
SetMasterMode method in object SfmOpening: Sets Master mode on Copy Pasted Opening.
SetMaterialAndGrade method in object StrPlate
SetMatrix method in object ThreeDCuts: Sets the rotation AND translation matrix.
SetMatrix method in object DrawingComponent: Sets the matrix of the drawing component instance.
SetMaxAngleLock method in object FittingSettingAtt: Locks or unlocks the MaxAngle parameter.
SetMaxCalculationTime method in object SetOfEquation: Sets a maximum time to the model calculations.
SetMaxDisplayedResultsLock method in object SearchSettingAtt: Locks or unlocks the Max Displayed Results setting parameter.
SetMaxPercentCacheSizeLock method in object CDMASettingAtt: Locks or unlocks the maximum percentage cache size before automatic cache cleaning.
SetMaxPreHighlightedElementsLock method in object SearchSettingAtt: Locks or unlocks the Max Displayed Results setting parameter.
SetMaxSelectionMoveLock method in object VisualizationSettingAtt: Locks or unlocks the MaxSelectionMove setting parameter.
SetMaximumDeviation method in object HybridShapeCurveSmooth: Sets the maximum deviation.
SetMeasureLock method in object Export3DXmlSettingAtt
SetMemberColor method in object ColorESSObjectSettingAtt
SetMemberColorLock method in object ColorESSObjectSettingAtt: Locks or unlocks the MemberColor parameter.
SetMemberEndCutLock method in object EndCutESSObjectSettingAtt
SetMemberMaterialLock method in object MaterialESSObjectSettingAtt: Locks or unlocks the MemberMaterial parameter.
SetMemberTypesLock method in object TypeESSObjectSettingAtt: Locks or unlocks the MemberTypes parameter.
SetMemoryStopperStateLock method in object MemoryWarningSettingAtt: Locks or unlocks the activation mode of the memory stopper mechanism.
SetMergingDistance method in object HybridShapeHealing: Sets the Merging distance for healing entity.
SetMeshPartsToCapture method in object AnalysisMeshPart: Set the list of candidate Mesh Parts for capture.
SetMfgCtxPrevProcRelationTypeLock method in object MfgHubSettingAtt: Locks or unlocks the GetMfgCtxPrevProcRelationType parameter.
SetMigration_FormatLock method in object MigrBatchSettingAtt: Locks or unlocks the "Format" setting parameter.
SetMigration_InterfaceLock method in object MigrBatchSettingAtt: Locks or unlocks the "Migration Interface" setting parameter.
SetMigration_TypeLock method in object MigrBatchSettingAtt: Locks or unlocks the "Conversion" setting parameter.
SetMinimumFPSModeLock method in object VisualizationSettingAtt: Locks or unlocks the MinimumFPSMode setting parameter.
SetMinimumSpaceFPSModeLock method in object VisualizationSettingAtt: Locks or unlocks the MinimumSpaceFPSMode setting parameter.
SetModeCreateDisplayLock method in object V4WritingSettingAtt: Locks or unlocks the ModeCreateDisplay setting parameter.
SetModeErrorDisplayLock method in object V4WritingSettingAtt: Locks or unlocks the ModeErrorDisplay setting parameter.
SetModeImageTextSizeLock method in object AnalysisPostProSettingAtt: Locks or unlocks the ModeImageTextSize parameter.
SetModel_DimensionLock method in object V4WritingSettingAtt: Locks or unlocks the Model_Dimension setting parameter.
SetModel_FactorLock method in object V4WritingSettingAtt: Locks or unlocks the Model_Factor setting parameter.
SetModel_File_NameLock method in object V4WritingSettingAtt: Locks or unlocks the Model_File_Name setting parameter.
SetModel_UnitLock method in object V4WritingSettingAtt: Locks or unlocks the Model_Unit setting parameter.
SetModifiableIn2DComponentInstances method in object DrawingText: Sets the text as modifiable in 2D component instances.
SetMotionBasis method in object GenericMotionProfile: Set motion basis of the Profile.
SetMotionProfile method in object RobotMotion: Sets the Motion profile.
SetMotionType method in object RobotMotion: Sets the type of Motion.
SetMouseDoubleClicDelayLock method in object VisualizationSettingAtt: Locks or unlocks the MouseDoubleClicDelay setting parameter.
SetMouseSpeedValueLock method in object VisualizationSettingAtt: Locks or unlocks the MouseSpeedValue setting parameter.
SetMovableDirectionTTRS method in object DatumTarget: Sets the movable Direction TTRS.
SetMoveActivityLock method in object WorkGeneralSettingAtt: Locks or unlocks the MoveActivity parameter.
SetMoveAfterCreationLock method in object FTAInfraSettingAtt: Locks or unlocks the Move After Creation setting parameter value.
SetMoveWithFixTExtendModeLock method in object AsmGeneralSettingAtt: Locks or unlocks the setting parameter managing the extension of a move to the components involved in a FixTogether.
SetNCGeometry method in object ManufacturingSurfaceMachiningArea: Sets a NCGeometry of a specified type to a Manufacturing Surface Machining Area.
SetNRLDirLock method in object IgpOlpSettingAtt: Locks or unlocks the NRL configuration file directory setting parameter.
SetNRLTeachDialogDisplayModeLock method in object IgpOlpSettingAtt: Locks or unlocks the OLPNRLTeachDialogDisplay parameter.
SetName method in object Tag: Sets name of the Tag.
SetName method in object ParameterProfiles
SetName method in object GenericToolProfile: Set name of the Tool Profile.
SetName method in object GenericMotionProfile: Set name of the Motion Profile.
SetName method in object RobGenericController: Set name of the generic controller.
SetName method in object SchAppCntrName: Set the application connector name.
SetName method in object GenericObjFrameProfile: Set name of the Object frame Profile.
SetName method in object GenericAccuracyProfile: Set name of the Accuracy Profile.
SetName method in object Task
SetNamedFilmCoeffAmplitude method in object ABQFilmCondition: Sets the name of the amplitude that gives the variation of the the film coefficient with time.
SetNamedSinkAmplitude method in object ABQFilmCondition: Sets the name of the amplitude that contains the variation of the sink temperature with time.
SetNamingModeLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "NamingMode" parameter.
SetNbFilesForDeletionLock method in object CDMASettingAtt: Locks or unlocks the number of files to delete in VPM cache during automatic cache cleaning.
SetNbFilesMaxLock method in object CDMASettingAtt: Locks or unlocks the maximum number of files in VPM cache before automatic cache cleaning.
SetNbIsoparsLock method in object VisualizationSettingAtt: Locks or unlocks the NbIsopars setting parameter.
SetNeverOverwriteExistingPartsLock method in object CDMASettingAtt: Locks or unlocks the enabling of forbidding overwriting existing part.
SetNewPrinterDirectory method in object PrintersSettingAtt: Sets the directory where new printers will be added.
SetNewPrinterDirectoryLock method in object PrintersSettingAtt: Locks or unlocks the directory where printers will be added.
SetNewWith3DSupportLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "NewWith3DSupport" parameter.
SetNewWithAxisSystemLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "NewWithAxisSystem" parameter.
SetNewWithGSLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "NewWithGS" parameter.
SetNewWithOGSLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "NewWithOGS" parameter.
SetNewWithPanelLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "NewWithPanel" parameter.
SetNextOrientation method in object HybridShapeTrim: Sets the orientation used to compute the feature, referring to the next trimmed element.
SetNextThickness method in object TCPTraceManagerGraphics: Set the TCP trace component (DNBTCPTraceReps) thickness(for line, axis) for new points.
SetNextType method in object TCPTraceManagerGraphics: Set the TCP trace component (DNBTCPTraceReps) type for new points.
SetNoDBConnectionLock method in object CDMASettingAtt: Locks or unlocks the database connection desabling.
SetNoShowBackgroundRGB method in object VisualizationSettingAtt: Sets the No Show Background Color setting attribute value.
SetNoShowBackgroundRGBLock method in object VisualizationSettingAtt: Locks or unlocks the No Show Background Color setting attribute.
SetNoZBufferSelectionModeLock method in object VisualizationSettingAtt: Locks or unlocks the NoZBufferSelectionMode setting parameter.
SetNoaCreationLock method in object FTASettingAtt: Locks or unlocks the Noa Creation parameter.
SetNodelockAlertLock method in object LicenseSettingAtt: Locks or unlocks the license expiry alert setting parameter.
SetNominalBaseOffset method in object CalibOffsets: Set nominal base offset for the robot base wrt robot base reference position.
SetNominalToolOffset method in object CalibOffsets: Set nominal tool offset for the robot wrt robot mount position.
SetNonLinearDamping method in object ABQDamperConnectionProperty: Sets the non-linear damping value of the Damper in the form of array, given the degree of freedom.
SetNonLinearStiffness method in object ABQSpringConnectionProperty: Sets the non-linear stiffness of the spring in the form of array, given the degree of freedom.
SetNonSemanticAllwaysUpgradeGeneralTolLock method in object FTASettingAtt: Locks or unlocks the Non Semantic Allways Upgrade general tolerance parameter.
SetNonSemanticAllwaysUpgradeLock method in object FTASettingAtt: Locks or unlocks the Non Semantic Allways Upgrade parameter.
SetNonSemanticDimAllowedLock method in object FTASettingAtt: Locks or unlocks the Non Semantic Dim Allowed parameter.
SetNonSemanticMarkedLock method in object FTASettingAtt: Locks or unlocks the Non Semantic Marked parameter.
SetNonSemanticTolAllowedLock method in object FTASettingAtt: Locks or unlocks the Non Semantic Tol Allowed parameter.
SetNumUrlNameLock method in object N4DNavigatorSettingAtt: Locks or unlocks the NumUrlName parameter.
SetNumberOfMinimumFPSLock method in object VisualizationSettingAtt: Locks or unlocks the NumberOfMinimumFPS setting parameter.
SetNumberOfMinimumSpaceFPSLock method in object VisualizationSettingAtt: Locks or unlocks the NumberOfMinimumSpaceFPS setting parameter.
SetObjectFrame method in object GenericObjFrameProfile: Set the underlying x,y,z, roll, pitch, yaw of the Object Frame.
SetObjectKeepingPosition method in object Sampled: Sets the object in the sampled.
SetObjectPositions method in object Marker3D: Sets the coordinates of the anchor point of the marker on the object.
SetObjectProfile method in object RobotMotion: Sets the Object profile.
SetOcclusionCullingModeLock method in object VisualizationSettingAtt: Locks or unlocks the OcclusionCullingMode setting parameter.
SetOfEquation object: Represents the set of equations object.
SetOffset method in object PlaceActivity
SetOffsetValue method in object HybridShapeOffset: Set Offset value with input as double.
SetOnBorders method in object ThreeDCuts: Sets the behavior on borders.
SetOnlyCurrentOperatedSolidSetInGeometryLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "OnlyCurrentOperatedSolidSetInGeometry" parameter.
SetOnlyCurrentSolidSetInGeometryLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "OnlyCurrentSolidSetInGeometry" parameter.
SetOnlyLoadCtxWithGeometryLock method in object MfgHubSettingAtt: Locks or unlocks the OnlyLoadCtxWithGeometry parameter.
SetOnlyShowLock method in object IgesSettingAtt: Locks or unlocks the Export only show setting parameter.
SetOpType method in object AMPTag: Function to set the operation type of the given AMPTag.
SetOpaqueFacesLock method in object VisualizationSettingAtt: Locks or unlocks the SetStereoModeLock setting parameter.
SetOpenContourSide method in object ManufacturingPrismaticMachiningArea: Sets the side of one open contour of a Manufacturing Prismatic Machining Area.
SetOpenModeForLoadLock method in object MfgHubSettingAtt: Locks or unlocks the OpenModeForLoad parameter.
SetOperatedObject method in object BooleanShape: Modifies the Second Operand.
SetOperatingVolume method in object BooleanShape: Swaps the operands.
SetOptC2ModeLock method in object IgesSettingAtt: Locks or unlocks the Continuity Optimizationmode setting parameter.
SetOptCleanTopoModeLock method in object IgesSettingAtt: Locks or unlocks the Clean Topo Mode setting parameter.
SetOptFittingModeLock method in object IgesSettingAtt: Locks or unlocks the Fitting Mode setting parameter.
SetOptInvalidGeomModeLock method in object IgesSettingAtt: Locks or unlocks the InvalidGeom mode setting parameter.
SetOptLoop3DModeLock method in object IgesSettingAtt: Locks or unlocks the Force 3D Loop setting parameter.
SetOrder method in object NavigatorWorkbench: Sets the order of an object.
SetOrientation method in object HybridShapeBlend: Sets the orientation of a curve of the blend.
SetOrientation method in object HybridShapeSplit: Sets the orientation used to compute the split.
SetOrientationConnector method in object PspPartConnector: Sets Face connector.
SetOrientationLock method in object TreeVizManipSettingAtt: Locks or unlocks the orientation applied to the specification tree.
SetOrientationMode method in object RobotMotion: Sets the TCP Orientation Mode.
SetOrientationVector method in object PspLightConnector: Sets the Orientation Direction of the connector.
SetOrigin method in object Hole: Sets the origin point which the hole is anchored to.
SetOrigin method in object PspLightConnector: Sets the position of the connector.
SetOriginCornerCode method in object SchFrameInfo: Set the frame origin corner code.
SetOriginPoint method in object ManufacturingMachiningAxis: Sets the Origin of a Manufacturing Machining Axis System used as Origin.
SetOriginPointByCoordinates method in object ManufacturingMachiningAxis: Sets the Origin of a Manufacturing Machining Axis System used as Origin by coordinates.
SetOriginXDirection method in object ManufacturingMachiningAxis: Sets the Origin X direction of a Manufacturing Machining Axis System used as Origin.
SetOriginZDirection method in object ManufacturingMachiningAxis: Sets the Origin Z direction of a Manufacturing Machining Axis System used as Origin.
SetOtherSelectionTimeoutActivityLock method in object VisualizationSettingAtt: Locks or unlocks the OtherSelectionTimeoutActivity setting parameter.
SetOtherSelectionTimeoutLock method in object VisualizationSettingAtt: Locks or unlocks the OtherSelectionTimeout setting parameter.
SetOutputAtAllModes method in object ABQFHOutputRequest: For frequency step: Sets request for output results at all modes.
SetOutputAtLastIncrement method in object ABQOutputRequest: Sets request for output results at last increment.
SetOutputHeightLock method in object RenderingSettingAtt: Locks or unlocks the OutputHeight parameter.
SetOutputPathLock method in object RenderingSettingAtt: Locks or unlocks the OutputPath parameter.
SetOutputPathLock method in object MultiCADSettingAtt: Locks or unlocks the OutputPath parameter.
SetOutputProductFilterLock method in object TreeTabSettingAtt: Locks or unlocks the "Output Products Folder" parameter.
SetOutputSizeFromLock method in object RenderingSettingAtt: Locks or unlocks the OutputSizeFrom parameter.
SetOutputTypeLock method in object RenderingSettingAtt: Locks or unlocks the OutputType parameter.
SetOutputWidthLock method in object RenderingSettingAtt: Locks or unlocks the OutputWidth parameter.
SetOverrun method in object DrawingDimExtLine: Set overrun of dimension extension line.
SetPPRSaveConfigLock method in object Export3DXmlSettingAtt: Locks or unlocks the flag.
SetPPWORDSyntax method in object ManufacturingActivitySyntax: Sets the PP words syntax.
SetPPWord method in object ManufacturingToolMotion: Adds a line containing iMessage to a Manufacturing PP Word ToolMotion.
SetPROJECT_File_PathLock method in object InteropSettingAtt: Locks or unlocks the "PROJECT File Path" setting parameter.
SetPSCycleTimeLock method in object SimulationSettingAtt: Locks or unlocks the PSCycleTime parameter.
SetPSDynClashModeLock method in object SimulationSettingAtt: Locks or unlocks the PSDynClashMode parameter.
SetPSGraphicSimStepLock method in object SimulationSettingAtt: Locks or unlocks the PSGraphicSimStep parameter.
SetPSGraphicUpdateLock method in object SimulationSettingAtt: Locks or unlocks the PSGraphicUpdate parameter.
SetPSText method in object DrawingDimValue: Set PS text to dimension value.
SetPVEndConditionLock method in object SimulationSettingAtt: Locks or unlocks the PVEndCondition parameter.
SetPVStateMgtLock method in object SimulationSettingAtt: Locks or unlocks the PVStateMgt parameter.
SetPackAndGoRepositoryPathLock method in object MfgHubSettingAtt: Locks or unlocks the PackAndGoRepositoryPath parameter.
SetPaperHeight method in object DrawingSheet: Sets the paper width of the drawing sheet, avalaible on user format.
SetPaperWidth method in object DrawingSheet: Sets the paper width of the drawing sheet, avalaible on user format.
SetParameterAsInput method in object SetOfEquation: Specifies that the parameter must be considered as input parameter.
SetParameterAsOutput method in object SetOfEquation: Specifies that the parameter must be considered as an output parameter.
SetParameterLaw method in object HybridShapeSweepConic: Sets the parameter law that will be used in conic sweep operation.
SetParameterNameSurroundedByTheSymbolLock method in object KnowledgeSheetSettingAtt: Locks or unlocks the ParameterNameSurroundedByTheSymbol parameter.
SetParameterOnSubString method in object DrawingText: Sets a property on a substring of the drawing text.
SetParameterTreeViewWithFormulaLock method in object KnowledgeSheetSettingAtt: Locks or unlocks the ParameterTreeViewWithFormula parameter.
SetParameterTreeViewWithValueLock method in object KnowledgeSheetSettingAtt: Locks or unlocks the ParameterTreeViewWithValue parameter.
SetParametersInTreeLock method in object FTASettingAtt: Locks or unlocks the Parameters in tree parameter.
SetParametersList method in object WIBuyOff
SetParametersList method in object WIDataCollection
SetParametersList method in object WIChangeNotification
SetParametersNodeInTreeLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ParametersNodeInTree" parameter.
SetPartAxisSystem method in object ManufacturingMachiningAxis: Sets the Part Axis System of a Manufacturing Machining Axis System.
SetPartParametricAttributes method in object PspBuildPart: Sets the part parametric attribute names.
SetPartProdModeLock method in object IgesSettingAtt: Locks or unlocks the Import Product mode setting parameter.
SetPartRelation method in object MoveToPostureActivity: DEPRECATED.
SetPartRelationWithOffset method in object MoveToPostureActivity: DEPRECATED.
SetPartUpdateStatusLock method in object MeasureSettingAtt: Locks or unlocks the PartUpdateStatus parameter.
SetPartsParameterModeLock method in object MultiCADSettingAtt: Locks or unlocks the PartsParameterMode parameter.
SetPasteComponentModeLock method in object AsmConstraintSettingAtt: Locks or unlocks the component paste setting parameter.
SetPasteSameInstanceLock method in object TreeTabSettingAtt: Locks or unlocks the 'Paste Same Instance' parameter.
SetPath method in object SchRoute: Set the defining points of a route.
SetPath method in object SchGRRRoute: Set the defining points of a route graphic.
SetPath2 method in object SchGRRRoute: Set the defining points of a route graphic.
SetPath3 method in object SchGRRRoute: Set the defining points of a route graphic.
SetPathFinderSmoothLock method in object FittingSettingAtt: Locks or unlocks the PathFinderSmooth parameter.
SetPattern method in object ManufacturingOperation: Associate a Machining Pattern to a Manufacturing Operation.
SetPercentage method in object SWKSegment
SetPercentage method in object SWKLineOfSightNode
SetPick method in object VisPropertySet: Sets the state pick mode for the current selection.
SetPickAct method in object PlaceActivity
SetPickedProducts method in object PickActivity
SetPickingWindowSizeLock method in object VisualizationSettingAtt: Locks or unlocks the PickingWindowSize setting parameter.
SetPieceDiscriminationIndex method in object HybridShapeTrim: Sets the discrimination index.
SetPinSupports method in object ABQRigidBodyConstraint: Sets the pin point supports for the rigid body.
SetPitch method in object HybridShapeHelix: Sets the helix pitch.
SetPitch2 method in object HybridShapeHelix: Changes the Helix pitch2 .
SetPlaceAct method in object PickActivity
SetPlacedProducts method in object PlaceActivity
SetPlacementAxis method in object SchCompGroupExt: Set the placement axis for the component group.
SetPlaneAxisAngle method in object HybridShapeDevelop: Sets the rotation angle.
SetPlaneAxisCoord method in object HybridShapeDevelop: Sets the translation coordinates.
SetPlaneAxisSwapAxes method in object HybridShapeDevelop: Sets the inversion axes from their previous definitions.
SetPlaneColor method in object SectioningSettingAtt: Sets the PlaneColor parameter.
SetPlaneColorLock method in object SectioningSettingAtt: Locks or unlocks the PlaneColor parameter.
SetPlaneNormalLock method in object SectioningSettingAtt: Locks or unlocks the PlaneNormal parameter.
SetPlaneOriginLock method in object SectioningSettingAtt: Locks or unlocks the PlaneOrigin parameter.
SetPlateColor method in object ColorSTDObjectSettingAtt
SetPlateColor method in object ColorESSObjectSettingAtt
SetPlateColorLock method in object ColorSTDObjectSettingAtt: Locks or unlocks the PlateColor parameter.
SetPlateColorLock method in object ColorESSObjectSettingAtt: Locks or unlocks the PlateColor parameter.
SetPlateMaterialLock method in object MaterialESSObjectSettingAtt: Locks or unlocks the PlateMaterial parameter.
SetPlateTypesLock method in object TypeESSObjectSettingAtt: Locks or unlocks the PlateTypes parameter.
SetPoint method in object ArrangementNode: Sets the location of the current ArrangementNode.
SetPointAfter method in object HybridShapeSpline: Sets the Point After a given position.
SetPointBefore method in object HybridShapeSpline: Sets the Point Before a given position.
SetPointConstraintExplicit method in object HybridShapeSpline: Sets the Constraint of the point at iPos.
SetPointConstraintFromCurve method in object HybridShapeSpline: Sets the Constraint of the point at iPos.
SetPortionToKeep method in object HybridShapeTrim: Sets a portion to keep number in Pieces mode.
SetPosAngle method in object HybridShapeSweepExplicit: Sets angles if both profile and first sweep plane axis systems from default positions.
SetPosAngle method in object HybridShapePositionTransfo: Sets angles of both initial and target coordinate systems.
SetPosCoord method in object HybridShapeSweepExplicit: Sets translations coordinates if both profile axis system and first sweep plane axis system from default positions.
SetPosCoord method in object HybridShapePositionTransfo: Sets translation coordinates of both initial and target coordinate systems.
SetPosDirection method in object HybridShapeSweepExplicit: Sets the positioning directions : profile plane or first sweep plane X-axis direction.
SetPosParamData method in object SfmStandardPosStrategyParameters: Sets the Position Parameter Data for different Strategies.
SetPosPoint method in object HybridShapeSweepExplicit: Sets the points designated as the origins of the profile plane and first sweep plane.
SetPosPoint method in object HybridShapePositionTransfo: Sets the points designated as the origins of the initial and target planes.
SetPosSwapAxes method in object HybridShapeSweepExplicit: Sets axes inversion from previous definition for both profile plane and first sweep plane.
SetPosSwapAxes method in object HybridShapePositionTransfo: Sets axis inversion from previous definitions for both initial and target planes.
SetPosition method in object Plane: Sets the position where the plane is displayed.
SetPosition method in object AMPTag: Function to set the position( array of doubles; X, Y, Z, Yaw, Roll, Pitch values ) of the given AMPTag.
SetPosition method in object Section: Sets the position of the section.
SetPosition method in object SchGRRComp: Set the current position of the component.
SetPosition method in object SWKBody: Sets a new absolute manikin position.
SetPosition method in object SWKSegment: Sets a new absolute position for the segment.
SetPosition method in object SchRouteSymbol: Set the symbol's position on the route that own it.
SetPosition method in object SchCntrLocation: Set the current position of the connector in absolute coordinates.
SetPosition method in object SWKLineOfSight: Sets a new absolute position for the line of sight.
SetPosition method in object MoveToPostureActivity: Sets the Manikin's position value in the MoveToPosture Activity.
SetPositionDirection method in object HybridShapePositionTransfo: Sets the positioning directions.
SetPositioningStrategy method in object SfmStandardOpening: Sets the Position Strategy and Positin Strategy Parameters.
SetPositions method in object Marker2D: Sets the coordinates of the positions of the Marker2D.
SetPostLoadScriptOptionLock method in object MfgHubSettingAtt: Locks or unlocks the PostLoadScriptOption parameter.
SetPostLoadScriptPathLock method in object MfgHubSettingAtt: Locks or unlocks the PostLoadScriptPath parameter.
SetPostLoadVBAModuleLock method in object MfgHubSettingAtt: Locks or unlocks the PostLoadVBAModule parameter.
SetPosture method in object SWKBody: Set the manikin to a specific predefined posture.
SetPostureValues method in object MoveToPostureActivity
SetPreSelNavigatorStartedByArrowKeysLock method in object VisualizationSettingAtt: Locks or unlocks the PreSelNavigatorStartedByArrowKeys setting parameter.
SetPreSelectionModeLock method in object VisualizationSettingAtt: Locks or unlocks the PreSelectionMode setting parameter.
SetPrecision method in object SetOfEquation: Sets the calculation precision.
SetPreselectedElementLinetypeLock method in object VisualizationSettingAtt: Locks or unlocks the PreselectedElementLinetype setting parameter.
SetPreselectedElementRGB method in object VisualizationSettingAtt: Sets the PreselectedElementRGB parameter.
SetPreselectedElementRGBLock method in object VisualizationSettingAtt: Locks or unlocks the PreselectedElementRGB setting parameter.
SetPresentationLock method in object Export3DXmlSettingAtt
SetPrevAreaLock method in object DMUTolSettingAtt: Locks or unlocks the Preview Area setting parameter value.
SetPrevProcParseTypeForMfgCtxLock method in object MfgHubSettingAtt: Locks or unlocks the PrevProcParseTypeForMfgCtx parameter.
SetPreventBackgroundAccessLock method in object DraftingSettingAtt: Locks or unlocks the PreventBackgroundAccess parameter.
SetPreventDimDriving3DCstrLock method in object DraftingSettingAtt: Locks or unlocks the PreventDimDriving3DCstr parameter.
SetPreventFileNewLock method in object DraftingSettingAtt: Locks or unlocks the PreventFileNew parameter.
SetPreventGenViewStyleLock method in object DraftingSettingAtt: Locks or unlocks the PreventGenViewStyle parameter.
SetPreventSetAsDefaultLock method in object DraftingSettingAtt: Locks or unlocks the PreventSetAsDefault parameter.
SetPreventSwitchStandardLock method in object DraftingSettingAtt: Locks or unlocks the PreventSwitchStandard parameter.
SetPreventTrueDimensionCreationLock method in object DraftingSettingAtt: Locks or unlocks the PreventTrueDimensionCreation parameter.
SetPreventUpdateStandardLock method in object DraftingSettingAtt: Locks or unlocks the PreventUpdateStandard parameter.
SetPreventViewGeomUpgradeLock method in object DraftingSettingAtt: Locks or unlocks the PreventViewGeomUpgrade parameter.
SetPreviousOrientation method in object HybridShapeTrim: Sets the orientation used to compute the feature, referring to the previous trimmed element.
SetPrinterDirectoriesLock method in object PrintersSettingAtt: Locks or unlocks the directories of printer files and their states.
SetPrinterGroupsLock method in object PrintersSettingAtt: Locks or unlocks the definition of each printer group.
SetPriorityLock method in object DocumentationSettingAtt: Locks or unlocks the contextual priority parameter.
SetProEInstanceModeLock method in object MultiCADSettingAtt: Locks or unlocks the ProEInstanceMode parameter.
SetProEInstanceNameLock method in object MultiCADSettingAtt: Locks or unlocks the ProEInstanceName parameter.
SetProEQuiltsReadLock method in object MultiCADSettingAtt: Locks or unlocks the ProEQuiltsRead parameter.
SetProESimpRepModeLock method in object MultiCADSettingAtt: Locks or unlocks the ProESimpRepMode parameter.
SetProESimpRepNameLock method in object MultiCADSettingAtt: Locks or unlocks the ProESimpRepName parameter.
SetProcProdRelationsLock method in object MfgHubSettingAtt: Locks or unlocks the ProcProdRelations parameter.
SetProcResRelationsLock method in object MfgHubSettingAtt: Locks or unlocks the ProcResRelations parameter.
SetProcessID method in object Activity
SetProcessIDScript method in object LibTabSettingAtt
SetProcessIDScriptLock method in object LibTabSettingAtt: Locks or unlocks the "Custom VB Script" parameter.
SetProcessTreeID method in object MHILoadParameters
SetProductAndReconciliate method in object ManufacturingSetup: Associate the Product to a Manufacturing Setup and reconciliate links.
SetProductBOMID method in object MHILoadParameters
SetProductUpdateStatusLock method in object MeasureSettingAtt: Locks or unlocks the ProductUpdateStatus parameter.
SetProfileElement method in object SketchBasedShape: Returns or sets a profile element.
SetProfileLimit method in object SfmProfile: Sets the limit at an Extremity of a Profile.
SetProjectionPlane method in object DrawingViewGenerativeBehavior: Sets the drawing view projection plane.
SetPropagateHighlightLock method in object Layout2DSettingAtt: Locks or unlocks the PropagateHighlight parameter.
SetPropagationType method in object HybridShapeExtractMulti: Sets the type of propagation for the ExtractMulti in the list of constraints at specified position.
SetProtectedElementsColor method in object Layout2DSettingAtt: Sets the ProtectedElementsColor parameter.
SetProtectedElementsColorLock method in object Layout2DSettingAtt: Locks or unlocks the ProtectedElementsColor parameter.
SetPublishAutoLaunchBrowserLock method in object N4DNavigatorSettingAtt: Locks or unlocks the PublishAutoLaunchBrowser parameter.
SetPublishTopologicalElementsLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "PublishTopologicalElements" parameter.
SetPullingDirection method in object DraftDomain: Sets the draft pulling direction.
SetQuickConstraintModeLock method in object AsmConstraintSettingAtt: Locks or unlocks the quick constraint setting parameter.
SetQuickConstraintOrderedList method in object AsmConstraintSettingAtt: Sets the quick constraint ordered list setting parameter.
SetRCSDataLibDirLock method in object RRSSettingAtt: Locks or unlocks the "RCSDATA$LIB" parameter.
SetRRS2ConnectDownloadersLock method in object RRSSettingAtt: Locks or unlocks the "RRS2ConnectDownloaders" parameter.
SetRRS2ConsistencyCmdDownloadersLock method in object RRSSettingAtt: Locks or unlocks the "RRS2ConsistencyCmdDownloaders" parameter.
SetRRS2ControllerIdentifiersLock method in object RRSSettingAtt: Locks or unlocks the "RRS2ControllerIdentifiers" parameter.
SetRRS2DeleteAutoDownloadFilesAfterXferLock method in object RRSSettingAtt: Locks or unlocks the "RRS2DeleteAutoDownloadFilesAfterXfer" parameter.
SetRRS2DfltControllerIdentifierLock method in object RRSSettingAtt: Locks or unlocks the "RRS2DfltControllerIdentifier" parameter.
SetRRS2DownloadDuringConnectLock method in object RRSSettingAtt: Locks or unlocks the "RRS2DownloadDuringConnect" parameter.
SetRRS2DownloadDuringSimRunLock method in object RRSSettingAtt: Locks or unlocks the "RRS2DownloadDuringSimRun" parameter.
SetRRS2DownloadInPartCoordinatesLock method in object RRSSettingAtt: Locks or unlocks the "RRS2DownloadInPartCoordinates" parameter.
SetRRS2DownloadLogFileNameLock method in object RRSSettingAtt: Locks or unlocks the "RRS2DownloadLogFileName" parameter.
SetRRS2FreePlaySimStepSizeLock method in object RRSSettingAtt: Locks or unlocks the "RRS2FreePlaySimStepSize" parameter.
SetRRS2MainTaskProcessingLock method in object RRSSettingAtt: Locks or unlocks the "RRS2MainTaskProcessing" parameter.
SetRRS2MotionPlannerActiveDuringTeachOLPLock method in object RRSSettingAtt: Locks or unlocks the "RRS2MotionPlannerActiveDuringTeachOLP" parameter.
SetRRS2SimRunDownloadersLock method in object RRSSettingAtt: Locks or unlocks the "RRS2SimRunDownloaders" parameter.
SetRRS2StopVRCWhenSimStopsLock method in object RRSSettingAtt: Locks or unlocks the "RRS2StopVRCWhenSimStops" parameter.
SetRRS2UpdateProgramOnDownloadLock method in object RRSSettingAtt: Locks or unlocks the "RRS2UpdateProgramOnDownload" parameter.
SetRRS2UseVRCInverseKinematicsLock method in object RRSSettingAtt: Locks or unlocks the "RRS2UseVRCInverseKinematics" parameter.
SetRRS2UseVRCTurnLimitsLock method in object RRSSettingAtt: Locks or unlocks the "RRS2UseVRCTurnLimits" parameter.
SetRRSLibDirLock method in object RRSSettingAtt: Locks or unlocks the "RRS$LIB" parameter.
SetRRSServerFileLock method in object RRSSettingAtt: Sets value of "RRS Servers File" parameter.
SetRadius method in object HybridShapeSphere: Sets Radius on the object.
SetRadius method in object HybridShapePolyline: Sets the radius at specified position of the polyline.
SetRadius method in object HybridShapeSweepCircle: Sets the radius value useful in some circular sweep types.
SetRadiusOnMacro method in object ManufacturingOperation: Defines radius attribute on the circular elementary macro motion on CIRCULAR MILLING or THREAD MILLING operations ONLY.
SetRadiusPitchParam method in object HybridShapeSpiral: Sets Radius pitch parameter.
SetRatingLock method in object HtsJointSpeedSettingsAtt: Locks or unlocks the Rating parameter.
SetReachColorLock method in object RobAnalysisSettingAtt: Locks or unlocks the ReachColor parameter.
SetRealColor method in object VisPropertySet: Sets the real color and the color inheritance flag for the current selection.
SetRealColor method in object SceneProductData: Returns / Set the scene product's color and inheritance.
SetRealLineType method in object VisPropertySet: Sets the real line type and the line type inheritance flag for the current selection.
SetRealOpacity method in object VisPropertySet: Sets the opacity and the opacity inheritance flag for the current selection.
SetRealTransparency method in object SceneProductData: Set the scene product's Transparency and inheritance.
SetRealWidth method in object VisPropertySet: Sets the real line width and the line width inheritance flag for the current selection.
SetRecordModeLock method in object ManipSettingAtt: Locks or unlocks the RecordMode parameter.
SetRectangularAreaSize method in object DatumTarget: Sets the size of the rectangular area.
SetRefDocLock method in object GeneralSessionSettingAtt: Locks or unlocks the referenced documents parameter.
SetReference method in object BasicComponent: Sets the reference corresponding to the given component.
SetReference method in object AnalysisEntity: Sets the reference corresponding to the given component.
SetReference method in object AnalysisLocalEntity: Sets the reference corresponding to the given component.
SetReferenceBasePosition method in object CalibOffsets: Set reference base position of robot.
SetReferenceDirection method in object HybridShapeWrapCurve: Sets the reference direction projection to the wrap curve feature.
SetReferenceDirectoryForTypesLock method in object LanguageSheetSettingAtt: Locks or unlocks the ReferenceDirectoryForTypes setting parameter.
SetReferencePoint method in object HybridShapePlaneEquation: Sets the reference point.
SetReferenceSpine method in object HybridShapeWrapCurve: Sets the reference spine to the wrap curve feature.
SetRelatedColors method in object DMUTolSettingAtt: Sets the Related Surface Color setting parameter value.
SetRelatedColorsLock method in object DMUTolSettingAtt: Locks or unlocks the Related Surface Color setting parameter value.
SetRelationsNodeInTreeLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "RelationsNodeInTree" parameter.
SetRelationsUpdateInPartContextEvaluateDuringUpdateLock method in object KnowledgeSheetSettingAtt: Locks or unlocks the RelationsUpdateInPartContextEvaluateDuringUpdate parameter.
SetRelationsUpdateInPartContextSynchronousRelationsLock method in object KnowledgeSheetSettingAtt: Locks or unlocks the RelationsUpdateInPartContextSynchronousRelations parameter.
SetRelativePosition method in object SchCntrLocation: Set the current position of the connector in absolute coordinates.
SetRelay method in object Publications: Valuates a publication object with another publication object.
SetReleasePathLock method in object CacheSettingAtt: Locks or unlocks the cache local path parameter.
SetReleasedVoxelLock method in object CacheSettingAtt: Locks or unlocks the released voxel parameter.
SetRelimiters method in object HybridShapeSweepLine: Sets the elements relimiting the spine (or the default spine).
SetRelimiters method in object HybridShapeSweepConic: Sets the elements relimiting the spine (or the default spine).
SetRelimiters method in object HybridShapeSweepCircle: Sets the elements relimiting the spine (or the default spine).
SetRelimiters method in object HybridShapeSweepExplicit: Sets the elements relimiting the spine (or the default spine).
SetRelimitingGeometry method in object ManufacturingOperation: Defines start / end element on PROFILE CONTOURING operation ONLY.
SetRenameFile method in object SendToService: Renames one file to be copied.
SetRenderStyleLock method in object TreeTabSettingAtt: Locks or unlocks the "Render Style" parameter.
SetRepModLock method in object IgesSettingAtt: Locks or unlocks the Export representation mode setting parameter.
SetReplaceOnlyAfterCurrentLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "ReplaceOnlyAfterCurrent" parameter.
SetReportCheckAdvisorLock method in object ReportGenerationSheetSettingAtt: Locks or unlocks the ReportCheckAdvisor parameter.
SetReportCheckExpertLock method in object ReportGenerationSheetSettingAtt: Locks or unlocks the ReportCheckExpert parameter.
SetReportHtmlInCatiaSessionLock method in object ReportGenerationSheetSettingAtt: Locks or unlocks the ReportHtmlInCatiaSession parameter.
SetReportObjectsInformationLock method in object ReportGenerationSheetSettingAtt: Locks or unlocks the ReportObjectsInformation parameter.
SetReportOutputDirectoryLock method in object ReportGenerationSheetSettingAtt: Locks or unlocks the ReportOutputDirectory parameter.
SetReportParametersInformationLock method in object ReportGenerationSheetSettingAtt: Locks or unlocks the ReportParametersInformation parameter.
SetReportPassedObjectsLock method in object ReportGenerationSheetSettingAtt: Locks or unlocks the ReportPassedObjects parameter.
SetRepresentation method in object ManufacturingUserRepresentation: Sets the User Representation Associated to the Object.
SetReshapeMode method in object SchGRRRoute2: Set the reshape mode.
SetResolvedSectionsPathLock method in object PathESSRessourcesSettingAtt: Locks or unlocks the ResolvedSectionsPath parameter.
SetResourceFilterLock method in object TreeTabSettingAtt: Locks or unlocks the 'Resource Folder' parameter.
SetResourceTreeID method in object MHILoadParameters
SetResultOutputDirLock method in object FASReportingSettingAtt: Locks or unlocks the "OLP Robot Program Directory" parameter.
SetRevolutionNumber method in object HybridShapeHelix: Changes the Revolution Numbers.
SetRmvNotAssgnPrdResOnSyncLock method in object MfgHubSettingAtt: Locks or unlocks the RmvNotAssgnPrdResOnSync parameter.
SetRobotProgramDirLock method in object IgpOlpSettingAtt: Locks or unlocks the OLP Directory setting parameter.
SetRootDLNameCreationRightLock method in object DLNameSettingAtt: Locks or unlocks the parameter RootDLNameCreationRight.
SetRotAccelColorLock method in object RobAnalysisSettingAtt: Locks or unlocks the RotAccelColor parameter.
SetRotAccelLimitLock method in object RobAnalysisSettingAtt: Locks or unlocks the RotAccelLimit parameter.
SetRotSpeedColorLock method in object RobAnalysisSettingAtt: Locks or unlocks the RotSpeedColor parameter.
SetRotSpeedLimitLock method in object RobAnalysisSettingAtt: Locks or unlocks the RotSpeedLimit parameter.
SetRotationAngle method in object SchGRRComp: Set the current rotation angle (from x-axis in radian) of the component.
SetRotationAxis method in object CircPattern: Sets the rotation axis.
SetRotationCenter method in object CircPattern: Sets the rotation center.
SetRotationSnapAngleLock method in object FTASettingAtt: Locks or unlocks the Rotation Snap Angle parameter.
SetRotationSnapAutoLock method in object FTASettingAtt: Locks or unlocks the Rotation Snap Auto parameter.
SetRotationSphereModeLock method in object VisualizationSettingAtt: Locks or unlocks the RotationSphereMode setting parameter.
SetRowSize method in object DrawingTable: Sets the height of a row of a drawing table.
SetRuledDevelopableSurfaceConnection method in object HybridShapeBlend
SetRunAnnotBehaviorLock method in object SimulationSettingAtt: Locks or unlocks the RunAnnotBehavior parameter.
SetRunAnnotationLock method in object SimulationSettingAtt: Locks or unlocks the RunAnnotation parameter.
SetRunEndConditionLock method in object SimulationSettingAtt: Locks or unlocks the RunEndCondition parameter.
SetRunHlnkBehaviorLock method in object SimulationSettingAtt: Locks or unlocks the RunHlnkBehavior parameter.
SetRunHyperlinkLock method in object SimulationSettingAtt: Locks or unlocks the RunHyperlink parameter.
SetRunPauseLock method in object SimulationSettingAtt: Locks or unlocks the RunPause parameter.
SetRunStateMgtLock method in object SimulationSettingAtt: Locks or unlocks the RunStateMgt parameter.
SetRunStepSizeLock method in object SimulationSettingAtt: Locks or unlocks the RunStepSize parameter.
SetRunTextBehaviorLock method in object SimulationSettingAtt: Locks or unlocks the RunTextBehavior parameter.
SetRunTextMsgLock method in object SimulationSettingAtt: Locks or unlocks the RunTextMsg parameter.
SetRunViewpointLock method in object SimulationSettingAtt: Locks or unlocks the RunViewpoint parameter.
SetRunVisBehaviorLock method in object SimulationSettingAtt: Locks or unlocks the RunVisBehavior parameter.
SetSFEEndCutLock method in object EndCutESSObjectSettingAtt
SetSHMStdProfPathLock method in object CatalogSHMObjectSettingAtt: Locks or unlocks the SHMStdProfPath setting parameter.
SetSHMViewFDBeadBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDBeadBTLFeat setting parameter.
SetSHMViewFDCircStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDCircStampBTLFeat setting parameter.
SetSHMViewFDCurveStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDCurveStampBTLFeat setting parameter.
SetSHMViewFDFlgCutBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDFlgCutBTLFeat setting parameter.
SetSHMViewFDFlgCutIMLLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDFlgCutIML setting parameter.
SetSHMViewFDFlgCutOMLLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDFlgCutOML setting parameter.
SetSHMViewFDFlgHoleBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDFlgHoleBTLFeat setting parameter.
SetSHMViewFDFlgHoleIMLLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDFlgHoleIML setting parameter.
SetSHMViewFDFlgHoleOMLLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDFlgHoleOML setting parameter.
SetSHMViewFDOtherStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDOtherStampBTLFeat setting parameter.
SetSHMViewFDStiffStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDStiffStampBTLFeat setting parameter.
SetSHMViewFDSurfFlgBTLFeatBFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDSurfFlgBTLFeatBF setting parameter.
SetSHMViewFDSurfFlgBTLFeatHFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDSurfFlgBTLFeatHF setting parameter.
SetSHMViewFDSurfFlgBTLSuppBFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDSurfFlgBTLSuppBF setting parameter.
SetSHMViewFDSurfFlgBTLSuppHFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDSurfFlgBTLSuppHF setting parameter.
SetSHMViewFDSurfFlgIMLBFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDSurfFlgIMLBF setting parameter.
SetSHMViewFDSurfFlgIMLHFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDSurfFlgIMLHF setting parameter.
SetSHMViewFDSurfFlgOMLBFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDSurfFlgOMLBF setting parameter.
SetSHMViewFDSurfFlgOMLHFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDSurfFlgOMLHF setting parameter.
SetSHMViewFDSurfStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDSurfStampBTLFeat setting parameter.
SetSHMViewFDUserStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFDUserStampBTLFeat setting parameter.
SetSHMViewFPBeadBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPBeadBTLFeat setting parameter.
SetSHMViewFPCircStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPCircStampBTLFeat setting parameter.
SetSHMViewFPCurveStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPCurveStampBTLFeat setting parameter.
SetSHMViewFPFlgCutBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPFlgCutBTLFeat setting parameter.
SetSHMViewFPFlgCutIMLLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPFlgCutIML setting parameter.
SetSHMViewFPFlgCutOMLLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPFlgCutOML setting parameter.
SetSHMViewFPFlgHoleBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPFlgHoleBTLFeat setting parameter.
SetSHMViewFPFlgHoleIMLLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPFlgHoleIML setting parameter.
SetSHMViewFPFlgHoleOMLLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPFlgHoleOML setting parameter.
SetSHMViewFPOtherStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPOtherStampBTLFeat setting parameter.
SetSHMViewFPStiffStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPStiffStampBTLFeat setting parameter.
SetSHMViewFPSurfFlgBTLFeatBFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgBTLFeatBF setting parameter.
SetSHMViewFPSurfFlgBTLFeatHFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgBTLFeatHF setting parameter.
SetSHMViewFPSurfFlgBTLSuppBFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgBTLSuppBF setting parameter.
SetSHMViewFPSurfFlgBTLSuppHFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgBTLSuppHF setting parameter.
SetSHMViewFPSurfFlgCLBBFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgCLBBF setting parameter.
SetSHMViewFPSurfFlgCLBHFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgCLBHF setting parameter.
SetSHMViewFPSurfFlgIMLBFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgIMLBF setting parameter.
SetSHMViewFPSurfFlgIMLHFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgIMLHF setting parameter.
SetSHMViewFPSurfFlgOML2BFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgOML2BF setting parameter.
SetSHMViewFPSurfFlgOML2HFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgOML2HF setting parameter.
SetSHMViewFPSurfFlgOMLBFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgOMLBF setting parameter.
SetSHMViewFPSurfFlgOMLHFLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfFlgOMLHF setting parameter.
SetSHMViewFPSurfStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPSurfStampBTLFeat setting parameter.
SetSHMViewFPUserStampBTLFeatLock method in object ViewCharacteristicCurvesSettingAtt: Locks or unlocks the SHMViewFPUserStampBTLFeat setting parameter.
SetSVGViewerLock method in object FASReportingSettingAtt: Locks or unlocks the "OLP Robot Program Directory" parameter.
SetSafetyPlane method in object ManufacturingSetup: Associates a Safety Plane to a Manufacturing Setup.
SetSameDisplayLock method in object UnitsSheetSettingAtt
SetSaveAsNewTemplateDirectoryLock method in object AnalysisPostProSettingAtt: Locks or unlocks the SaveAsNewTemplateDirectory parameter.
SetSaveAutoIncrementLock method in object RenderingSettingAtt: Locks or unlocks the SaveAutoIncrement parameter.
SetSaveCGRLock method in object DMUTolSettingAtt: Locks or unlocks the Save in CGR setting parameter value.
SetSaveControlFlowInPROModeLock method in object MfgHubSettingAtt: Locks or unlocks the SaveControlFlowInPROMode parameter.
SetSaveCoorsysInCgrLock method in object MultiCADSettingAtt: Locks or unlocks the SaveCoorsysInCgr parameter.
SetSaveInCGRLock method in object FTAInfraSettingAtt: Locks or unlocks the Save In CGR setting parameter value.
SetSavePPRNoDetailingLock method in object MfgHubSettingAtt: Locks or unlocks the SavePPRNoDetailing parameter.
SetSaveRelationToUnExposedPartLock method in object MfgHubSettingAtt: Locks or unlocks the SaveRelationToUnExposedPart parameter.
SetSaveShowEffctvtPanelLock method in object MfgHubSettingAtt: Locks or unlocks the SaveShowEffctvtPanel parameter.
SetSaveV5CalcTimeLock method in object MfgHubSettingAtt: Locks or unlocks the SaveV5CalcTime parameter.
SetScale method in object SchGRRComp: Set the current scale factor of the component.
SetSceneDefaultsColor method in object N4DNavigatorSettingAtt
SetSceneDefaultsColorLock method in object N4DNavigatorSettingAtt: Locks or unlocks the SceneDefaultsColor parameter.
SetScoredElement method in object DrawingDimValue: Set dimension scored element.
SetSecondAngleLaw method in object HybridShapeSweepCircle: Sets the second angle law useful in some circular sweep types.
SetSecondDirection method in object RectPattern: Sets the second repartition direction.
SetSecondDirection method in object HybridShapeCircleCtrRad: Sets the second direction on the plane to compute the point (for stability).
SetSecondDirection method in object HybridShapePointOnPlane: Sets the second direction on the plane to compute the point (for stability).
SetSecondLengthDefinitionType method in object HybridShapeSweepLine: Sets the second length definition type.
SetSecondLengthLaw method in object HybridShapeSweepLine: Sets the second length law useful in some linear sweep types.
SetSecondaryFormat method in object AssemblyConvertor: Defines the secondary properties that will be used in the print method.
SetSectPatternLock method in object FTASettingAtt: Locks or unlocks the Pattern of Visu setting parameter value.
SetSectPatternLock method in object DMUTolSettingAtt: Locks or unlocks the Pattern of Visu setting parameter value.
SetSectionExportTypeLock method in object SectioningSettingAtt: Locks or unlocks the SectionExportType parameter.
SetSectionFillLock method in object SectioningSettingAtt: Locks or unlocks the SectionFill parameter.
SetSectionLock method in object Export3DXmlSettingAtt
SetSectionsCatalogPathLock method in object PathESSRessourcesSettingAtt: Locks or unlocks the SectionsCatalogPath parameter.
SetSeedPoint method in object SchGRRRouteEllipse: Set the seed point of the route graphic ellipse.
SetSegmentValues method in object MoveToPostureActivity
SetSelectPublishedGeometryLock method in object FTASettingAtt: Locks or unlocks the Select Published Geometry parameter.
SetSelectedEdgeRGB method in object VisualizationSettingAtt: Sets the SelectedEdgeRGB parameter.
SetSelectedEdgeRGBLock method in object VisualizationSettingAtt: Locks or unlocks the SelectedEdgeRGB setting parameter.
SetSelectedElementRGB method in object VisualizationSettingAtt: Sets the SelectedElementRGB parameter.
SetSelectedElementRGBLock method in object VisualizationSettingAtt: Locks or unlocks the SelectedElementRGB setting parameter.
SetSelectedObjectID method in object MHILoadParameters: Sets the "ergocompbase" ID (oid) of selected object (object use to start the load).
SetSelection method in object AnalysisImage: Adds a selection to an image.
SetServerTimeOutLock method in object LicenseSettingAtt: Locks or unlocks the TimeOut setting parameter.
SetShaderModeLock method in object VisualizationSettingAtt: Locks or unlocks the ShaderMode setting parameter.
SetShapeColor method in object ColorSTDObjectSettingAtt
SetShapeColorLock method in object ColorSTDObjectSettingAtt: Locks or unlocks the ShapeColor parameter.
SetSharpnessAngle method in object HybridShapeHealing: Sets the Sharpness Angle for healing entity.
SetShiftedProfileLock method in object FTASettingAtt: Locks or unlocks the Shifted Profile parameter.
SetShow method in object VisPropertySet: Sets the state show mode for the current selection.
SetShowActivationLock method in object TreeVizManipSettingAtt: Locks or unlocks the visualization Show/NoShow's mode applied to the specification tree.
SetShowCompletionDialogBoxLock method in object IgesSettingAtt: Locks or unlocks the Show/No Show dialog box setting parameter.
SetShowLicenseLock method in object LicenseSettingAtt: Locks or unlocks the ShowLicense setting parameter.
SetShowOnlyFilteredObjectsLock method in object MfgHubSettingAtt: Locks or unlocks the ShowOnlyFilteredObjects parameter.
SetShowParametersLock method in object FunctionalSystemSettingAtt: Locks or unlocks the ShowParameters parameter.
SetShowRelationsLock method in object FunctionalSystemSettingAtt: Locks or unlocks the ShowRelations parameter.
SetShowSynchroStatusOfLocalParamCacheLock method in object FunctionalSystemSettingAtt: Locks or unlocks the ShowSynchroStatusOfLocalParamCache parameter.
SetSideStepAngleLock method in object HtsGeneralSettingAtt: Locks or unlocks the SideStepAngle parameter.
SetSilhouette method in object SweptVolumes
SetSimplify method in object HybridShapeAssemble: Set the simplify flag.
SetSingularColorLock method in object RobAnalysisSettingAtt: Locks or unlocks the SingularColor parameter.
SetSizeControlLock method in object CacheSettingAtt: Locks or unlocks the cache size control parameter.
SetSizeTypeLock method in object TreeVizManipSettingAtt: Locks or unlocks the type of size applied to the text of the specification tree.
SetSlaveObject method in object SfmSlot: Sets/Replaces the Penetrated Element used in the creation of the Slot.
SetSmoothAngleThreshold method in object HybridShapeBlend: Sets the angular threshold.
SetSmoothAngleThreshold method in object HybridShapeSweepLine: Sets the angular threshold.
SetSmoothAngleThreshold method in object HybridShapeSweepConic: Sets angular threshold under which discontinuities.
SetSmoothAngleThreshold method in object HybridShapeSweepCircle: Sets the angular threshold.
SetSmoothAngleThreshold method in object HybridShapeSweepExplicit: Sets angular threshold.
SetSmoothDeviation method in object HybridShapeBlend: Sets the deviation value (length) from guide curves allowed during sweeping operation in order to smooth it.
SetSnapAngleDistanceLock method in object ManipSettingAtt: Locks or unlocks the SnapAngleDistance parameter.
SetSnapPositionLock method in object ManipSettingAtt: Locks or unlocks the SnapPosition parameter.
SetSolidMULock method in object V4V5SpaceSettingAtt: Locks or unlocks the Solid Mock-Up Migration Mode setting parameter.
SetSpacingCode method in object SchFrameInfo: Set the frame spacing code.
SetSpatialSplit method in object SweptVolumes: Adds the possibility to parallelize swept&wrapping after a spatial split.
SetSpecificationFromPublication method in object AnalysisMeshPart: Adds the geometric value corresponding to the given global specification.
SetSpecificationFromReference method in object AnalysisMeshPart: Set the geometric value corresponding to the given global specification.
SetSpecifiedOutputVariables method in object ABQDataOutputRequest: Sets the specified variables and category type for which results are requested.
SetSpeedValue method in object GenericMotionProfile: Set speed value of the Profile.
SetSpindleMagnitude method in object ManufacturingOperation: Defines the magnitude of the spindle values.
SetSpine method in object HybridShapeLoft: Sets the spine to the lofted surface.
SetSplineType method in object HybridShapeSpline: Sets the spline type.
SetSplitFunctionalObjectNameLock method in object FunctionalSystemSettingAtt: Locks or unlocks the SplitFunctionalObjectName parameter.
SetSplitPlateAttributes method in object SfmSuperPlate: Set the SplitPlate(ChildPlate) Attributes(Thickness,Material,Grade).
SetStandardLock method in object FTAInfraSettingAtt: Locks or unlocks the Tolerancing Standard setting parameter value.
SetStartAndEndTangentsPlusConicParameter method in object HybridShapeConic: Sets the tangent directions at conic start and end points, and the conic parameter.
SetStartAndEndTangentsPlusPassingPoint method in object HybridShapeConic: Sets the tangent directions at conic start and end points, and a passing point.
SetStartFaceForClosing method in object HybridShapeLoft: Sets a face to the start section from the lofted surface.
SetStartParam method in object HybridShapeIntegratedLaw: Sets start parameter.
SetStartPoint method in object HybridShapeSpine: Sets the start point of the spine curve.
SetStartPoint method in object SchGRRRoute: Set the start point of the route graphic.
SetStartPointGeometry method in object ManufacturingOperation: Defines the geometry and the offset of a start point on POCKETING operation ONLY.
SetStartSectionTangent method in object HybridShapeLoft: Sets a tangent surface to the start section from the lofted surface.
SetStartTangentDirectionFlag method in object HybridShapeConic: Sets the tangent direction orientation at the conic start point.
SetStartUp_Model_For_DrawingLock method in object MigrBatchSettingAtt: Locks or unlocks the "Initial Drawing Path" setting parameter.
SetStartingAngle method in object HybridShapeHelix: Sets the helix starting angle.
SetStaticCullLock method in object VisualizationSettingAtt: Locks or unlocks the StaticCull setting parameter.
SetStaticLODLock method in object VisualizationSettingAtt: Locks or unlocks the StaticLOD setting parameter.
SetStatus method in object SchInternalFlow: Set insertion flow status.
SetStepByStepUpdateAndRerouteLock method in object SpecV4SettingAtt: Locks or unlocks the StepByStepUpdateAndReroute setting parameter.
SetStepIncrementNumber method in object ABQSolutionCase: Sets step and increment number for an image.
SetStereoModeLock method in object VisualizationSettingAtt: Locks or unlocks the StereoMode setting parameter.
SetStiffenerEndCutLock method in object EndCutESSObjectSettingAtt
SetStock method in object ManufacturingSetup: Associates a stock to a Manufacturing Setup.
SetStringAttribute method in object E5Property
SetStringUsedAsCarriageReturnLock method in object FunctionalSystemSettingAtt: Locks or unlocks the StringUsedAsCarriageReturn parameter.
SetStringUserAttribute method in object Fastener: et the value of user attribute whoes name matches the input string.
SetStyleSheetDirLock method in object FASReportingSettingAtt: Locks or unlocks the "OLP Robot Program Directory" parameter.
SetStyleSheetPathLock method in object WorkGeneralSettingAtt: Locks or unlocks the StyleSheetPath parameter.
SetSupport method in object HybridShapeBlend: Sets a support to the blend.
SetSupport method in object HybridShapeSpline: Sets the spline support surface.
SetSupport method in object HybridShapeExtractMulti: Sets the support of the list of constraints at specified position.
SetSupports method in object ABQMassScaling: Sets the supports that define the mass scaling region(s).
SetSupports method in object ABQRigidCoupling: Sets the support regions for the coupling.
SetSupports method in object ABQSmoothCoupling: Sets the support regions for the coupling.
SetSuppressMode method in object HybridShapeAssemble: Set the SuppressMode flag.
SetSurfaceAccuracyLock method in object Export3DXmlSettingAtt: Locks or unlocks the flag.
SetSurfaceElementsLocationLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "SurfaceElementsLocation" parameter.
SetSurfaceSupport method in object SewSurface: Sets the surface support for surfacic sew surface.
SetSymbColor method in object DrawingDimLine: Set symbol color of dimension line.
SetSymbThickness method in object DrawingDimLine: Set symbol thickness of dimension line.
SetSymbType method in object DrawingDimLine: Set symbol type of dimension line.
SetSymbol method in object DrawingWelding: Sets the symbol of the drawing welding.
SetSymbol method in object SchGRRCntr: Set the symbol or graphics used to represent a connector.
SetSymbolType method in object VisPropertySet: Sets the symbol type.
SetSymmetricalExtension method in object HybridShapeLinePtPt: Sets the symmetrical extension of the line (start = -end).
SetSymmetricalExtension method in object HybridShapeLinePtDir: Sets the symmetrical extension of the line (start = -end).
SetSymmetricalExtension method in object HybridShapeLineAngle: Sets the symmetrical extension of the line (start = -end).
SetSymmetricalExtension method in object HybridShapeLineNormal: Sets the symmetrical extension of the line (start = -end).
SetSymmetricalExtension method in object HybridShapeLineTangency: Sets the symmetrical extension of the line (start = -end).
SetSymmetricalExtension method in object HybridShapeLineBisecting: Sets the symmetrical extension of the line (start = -end).
SetSyncAnlSpecsLock method in object AnalysisSettingAtt: Locks or unlocks the SyncAnlSpecs parameter.
SetSyncTimeAndSpeedInSimulationLock method in object HtsGeneralSettingAtt: Locks or unlocks the SyncTimeAndSpeed parameter.
SetTCPOffset method in object GenericToolProfile: Set the underlying x,y,z, roll, pitch, yaw of the tool TCP offset.
SetTCPTraceMode method in object TCPTraceActivity: Set the tracing capability as active or not.
SetTagParam method in object ARCTag: Function to set the value of a given ARC tag parameter.
SetTagParam method in object ARCTagGroup: Function to set the value of a given ARC tag parameter.
SetTagTarget method in object RobotMotion: Sets the Robot Tag target.
SetTangency method in object HybridShapeSweepConic: Sets tangency surface or curve and its angle given the guide curve index.
SetTangencyAngle method in object HybridShapeHealing: Sets the distance objective for healing entity.
SetTangencyAngleLawInversion method in object HybridShapeSweepConic: Sets information whether tangency angle law has to be inverted or not for a specified guide curve.
SetTangencyChoiceNo method in object HybridShapeSweepCircle: Sets a sequence which identifies a solutionamong all possibilities of a circular profile sweep tangent to a surface.
SetTangencyContinuity method in object HybridShapeAssemble: Set the tangency continuity checker flag.
SetTangencyLaw method in object HybridShapeSweepConic: Sets tangency surface or curve and its angle given the guide curve index.
SetTangencyObjective method in object HybridShapeHealing: Sets the tangency objective for healing entity.
SetTangencyThreshold method in object HybridShapeCurveSmooth: Sets the tangency threshold.
SetTangent method in object ControlPoint2D
SetTangentIntersectPointPlusConicParm method in object HybridShapeConic: Sets the intersection point of the conic tangents to the start and end points, and the conic parameter.
SetTangentIntersectPointPlusPassingPoint method in object HybridShapeConic: Sets the intersection point of the conic tangents to the start and end points, and a passing point.
SetTaperAngle method in object HybridShapeHelix: Sets the helix taper angle.
SetTargetLine method in object SWKIKConstraint: Set the target line to follow.
SetTargetPlane method in object SWKIKConstraint: Set the target plane to follow.
SetTargetPoint method in object SWKIKConstraint: Set the target point to follow.
SetTask method in object CallRobotTaskActivity: Sets the Pointed RobotTask.
SetTechnicalDocumentationPathLock method in object DocumentationSettingAtt: Locks or unlocks the technical documentation location parameter.
SetTechnologicalDatas method in object Shot: Sets all the data associated to the part.
SetTempOutputDirectoryLock method in object AnalysisReportingSettingAtt: Locks or unlocks the TempOutputDirectory parameter.
SetTensionInDouble method in object HybridShapeBlend: Sets the tension values to a limit of the blend.
SetTensionType method in object HybridShapeBlend: Sets the tension type of a limit of the blend.
SetTerminationAttrListLock method in object PlugMapViewSettingAtt: Locks or unlocks the TerminationAttrList parameter.
SetTextActivityLock method in object WorkGeneralSettingAtt: Locks or unlocks the TextActivity parameter.
SetTextColor method in object MeasureSettingAtt: Sets the TextColor parameter .
SetTextColorLock method in object MeasureSettingAtt: Locks or unlocks the TextColor parameter.
SetTextIDVisibility method in object Fastener: ets the Hide/Show status of the text ID of the fastener in the 3D window  Valid Param : 1,0 </dl> <dt>Example: <dd> //to make the fastener id visible in 3D MyFastener.
SetTextMigrationLock method in object V4V5SpaceSettingAtt: Locks or unlocks the 3D Text Migration setting parameter.
SetTextPositions method in object Marker3D: Sets the coordinates of the positions of a text marker 3D.
SetThematicsParameterLock method in object GlobalStatisticsSettingAtt: Locks or unlocks the global statistics parameters.
SetThematicsParameterLock method in object GeneralStatisticsSettingAtt: Locks or unlocks the general statistics parameters.
SetThickness method in object TCPTrace: Set the TCP trace component (DNBTCPTraceReps) thickness(for line, axis).
SetThicknessListPathLock method in object PathESSRessourcesSettingAtt: Locks or unlocks the ThicknessListPath parameter.
SetThreeIntermediatePassingPoints method in object HybridShapeConic: Sets three conic intermediate passing points.
SetTieSupports method in object ABQRigidBodyConstraint: Sets the tie point supports for the rigid body.
SetTildeDisplayLock method in object MeasureSettingAtt: Locks or unlocks the TildeDisplay parameter.
SetTileLayoutWindowLock method in object Layout2DSettingAtt: Locks or unlocks the tile of Layout window parameter.
SetTimestampModeLock method in object CacheSettingAtt: Locks or unlocks the timestamp control in cache.
SetToBestPosture method in object SWKBody: Set the manikin to the posture that will provide it its maximum score.
SetTolJoinLock method in object IgesSettingAtt: Locks or unlocks the join tolerance setting parameter.
SetTolOptInvalidGeomLock method in object IgesSettingAtt: Locks or unlocks the InvalidGeom Tolerance setting parameter.
SetToleranceLock method in object IgesSettingAtt: Locks or unlocks the Tolerance ( optimize - fitting ) setting parameter.
SetToleranceType method in object DrawingGDT: Sets the symbol used in the row of the GDT.
SetTolerances method in object DrawingDimension: Set tolerance infomation of dimension value.
SetTool method in object ManufacturingOperation: Assign an already created tool to a Manufacturing Operation.
SetToolAxis method in object ManufacturingActivity: Defines the ToolAxis coordinates of a Manufacturing Activity.
SetToolChangePoint method in object ManufacturingSetup: Initialise the ToolChange point of the machine linked to a Manufacturing Setup.
SetToolChangePointByName method in object ManufacturingSetup: Initialise the ToolChange point of the machine linked to a Manufacturing Setup.
SetToolMobility method in object GenericToolProfile: Set tool mobility.
SetToolProfile method in object RobotMotion: Sets the Tool profile.
SetToolTipModeLock method in object DevAnalysisSettingAtt: Locks or unlocks the ToolTipMode parameter.
SetTraceAxisColorLock method in object SimTraceSettingAtt: Locks or unlocks the TraceAxisColor parameter.
SetTraceAxisThickLock method in object SimTraceSettingAtt: Locks or unlocks the TraceAxisThick parameter.
SetTraceAxisTypeLock method in object SimTraceSettingAtt: Locks or unlocks the TraceAxisType parameter.
SetTraceAxisVisuLock method in object SimTraceSettingAtt: Locks or unlocks the TraceAxisVisu parameter.
SetTraceDeletePathLock method in object SimTraceSettingAtt: Locks or unlocks the TraceDeletePath parameter.
SetTraceLegendLock method in object SimTraceSettingAtt: Locks or unlocks the TraceLegend parameter.
SetTraceLineColorLock method in object SimTraceSettingAtt: Locks or unlocks the TraceLineColor parameter.
SetTraceLineThickLock method in object SimTraceSettingAtt: Locks or unlocks the TraceLineThick parameter.
SetTraceLineTypeLock method in object SimTraceSettingAtt: Locks or unlocks the TraceLineType parameter.
SetTraceLineVisuLock method in object SimTraceSettingAtt: Locks or unlocks the TraceLineVisu parameter.
SetTraceNextColor method in object TCPTraceManagerGraphics: Set the TCP trace component (DNBTCPTraceReps) color for new points.
SetTracePointColorLock method in object SimTraceSettingAtt: Locks or unlocks the TracePointColor parameter.
SetTracePointSymbolLock method in object SimTraceSettingAtt: Locks or unlocks the TracePointSymbol parameter.
SetTracePointVisuLock method in object SimTraceSettingAtt: Locks or unlocks the TracePointVisu parameter.
SetTrackAutoUpdateLock method in object FittingSettingAtt: Locks or unlocks the TrackAutoUpdate parameter.
SetTransformation2D method in object SchGRRComp: Set the local coordinate reference frame (with respect to absolute coordinate system) of the component.
SetTransition method in object HybridShapeBlend: Sets the transition orientation to a limit of the blend.
SetTranslatorModeLock method in object MultiCADSettingAtt: Locks or unlocks the Translator mode parameter.
SetTransparencyModeLock method in object VisualizationSettingAtt: Locks or unlocks the TransparencyMode setting parameter.
SetTravelColorLock method in object DevAnalysisSettingAtt: Locks or unlocks the TravelColor parameter.
SetTravelLimitLock method in object DevAnalysisSettingAtt: Locks or unlocks the TravelLimit parameter.
SetTrimSupport method in object HybridShapeBlend: Sets whether a support of the blend is to be trimmed off.
SetTrueDimensionColor method in object FTASettingAtt: Sets the TrueDimensionColor parameter.
SetTrueDimensionColorLock method in object FTASettingAtt: Locks or unlocks the TrueDimensionColor parameter.
SetTrueDimensionLock method in object FTASettingAtt: Locks or unlocks the TrueDimension parameter.
SetTurnNumbers method in object RobotMotion: Sets Turn Numbers or Turn signs for the robot motion.
SetTwoIntermediatePassingPointsPlusOneTangent method in object HybridShapeConic: Sets two conic intermediate passing points and a tangent at one of the passing points.
SetTwoSideLightingModeLock method in object VisualizationSettingAtt: Locks or unlocks the TwoSideLightingMode setting parameter.
SetType method in object ThreeDCuts: Sets the type of cut we're doing.
SetType method in object AMPTag: Function to set the type of the given AMPTag.
SetType method in object TCPTrace: Set the TCP trace component (DNBTCPTraceReps) type.
SetType method in object Tag: Sets Frame Type of the Tag by Name.
SetTypeBaseFrmLock method in object ImportD5SettingAtt: Locks or unlocks the TypeBaseFrm parameter.
SetTypeCoorsysLock method in object ImportD5SettingAtt: Locks or unlocks the TypeCoorsys parameter.
SetTypeLock method in object TreeVizManipSettingAtt: Locks or unlocks the type of the specification tree.
SetTypeOfIconOnFunctionalElementLock method in object FunctionalSystemSettingAtt: Locks or unlocks the TypeOfIconOnFunctionalElement parameter.
SetTypeToolFrmLock method in object ImportD5SettingAtt: Locks or unlocks the TypeToolFrm parameter.
SetTypeWclPathLock method in object ImportD5SettingAtt: Locks or unlocks the TypeWclPath parameter.
SetUGActiveLayersOnlyLock method in object MultiCADSettingAtt: Locks or unlocks the UGActiveLayersOnly parameter.
SetUGDrawingNameLock method in object MultiCADSettingAtt: Locks or unlocks the UGDrawingName parameter.
SetUGLayerNumbersLock method in object MultiCADSettingAtt: Locks or unlocks the UGLayerNumbers parameter.
SetUGOpenSurfacesLock method in object MultiCADSettingAtt: Locks or unlocks the UGOpenSurfaces parameter.
SetUIStyleLock method in object GeneralSessionSettingAtt: Locks or unlocks the user interface style parameter.
SetUTCTimeFormatLock method in object CacheSettingAtt: Locks or unlocks the timestamp format.
SetUgReferenceSetLock method in object MultiCADSettingAtt: Locks or unlocks the UgReferenceSet parameter.
SetUnderFeatureLock method in object FTAInfraSettingAtt: Locks or unlocks the Under Geometric Feature Nodes setting parameter value.
SetUnderIntensifiedRGB method in object VisualizationSettingAtt: Sets the UnderIntensifiedRGB parameter.
SetUnderIntensifiedRGBLock method in object VisualizationSettingAtt: Locks or unlocks the UnderIntensifiedRGB setting parameter.
SetUnderSetLock method in object FTAInfraSettingAtt: Locks or unlocks the Under Annotation Set Node setting parameter value.
SetUnderViewLock method in object FTAInfraSettingAtt: Locks or unlocks the Under View/Annotation Plane Nodes setting parameter value.
SetUnequalInstanceNumber method in object CircPattern: Sets the Instance Number.
SetUnequalInstanceNumber method in object RectPattern: Sets the Instance Number.
SetUnequalStep method in object CircPattern: This method is deprecated Sets the UnequalStep.
SetUpdateAnalysisInSimulationLock method in object HtsGeneralSettingAtt: Locks or unlocks the UpdateAnalysisInSimulation parameter.
SetUpdateElementsRefreshedLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "UpdateElementsRefreshed" parameter.
SetUpdateLinkedExternalReferencesLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "UpdateLinkedExternalReferences" parameter.
SetUpdateModeLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "UpdateMode" parameter.
SetUpdateNeededRGB method in object VisualizationSettingAtt: Sets the UpdateNeededRGB parameter.
SetUpdateNeededRGBLock method in object VisualizationSettingAtt: Locks or unlocks the UpdateNeededRGB setting parameter.
SetUpdateResultLock method in object SectioningSettingAtt: Locks or unlocks the UpdateResult parameter.
SetUpdateStatusModeLock method in object AsmGeneralSettingAtt: Locks or unlocks the update status computation setting parameter.
SetUpdateStoppedOnErrorLock method in object PartInfrastructureSettingAtt: Locks or unlocks the "UpdateStoppedOnError" parameter.
SetUploaderDirLock method in object IgpOlpSettingAtt: Locks or unlocks the OLP Parser Directory setting parameter.
SetUploaderLock method in object IgpOlpSettingAtt: Locks or unlocks the OLP Parser setting parameter.
SetUsageLimitLock method in object MemoryWarningSettingAtt: Locks or unlocks the the alert percentage.
SetUseCoordinateSystemType method in object ABQDisplacementBC: Set the user coordinate system type.
SetUseCoordinateSystemType method in object ABQConcentratedForce: set the user coordinate system type.
SetUseOnly method in object ExpertRuleBaseComponentRuntime: Prevents any access to the component for reading or deleting.
SetUseStyleCreateObjectsLock method in object DraftingSettingAtt: Locks or unlocks the UseStyleCreateObjects parameter.
SetUserProfilesList method in object OperationProfile: Sets User Profiles List for the Operation.
SetUserVariableExpr method in object DeviceJointRelations
SetUserWalkSpeedStatusLock method in object HtsGeneralSettingAtt: Locks or unlocks the UserWalkSpeedStatus parameter.
SetV4V5_FDTLock method in object CGRAdhesionSettingAtt: Locks or unlocks the V4V5_FDT container activation state.
SetV4_Model_CommentPageLock method in object CGRAdhesionSettingAtt: Retrieves information about the V4_Model_CommentPage container activation state.
SetV4_Model_LnFLock method in object CGRAdhesionSettingAtt: Locks or unlocks the V4_Model_LnF container activation state.
SetV4_Part_DefinitionLock method in object MigrBatchSettingAtt: Locks or unlocks the "V4 Part Definition" setting parameter.
SetV5_SPALock method in object CGRAdhesionSettingAtt: Locks or unlocks the V5_SPA container activation state.
SetVPMCachePathLock method in object CDMASettingAtt: Locks or unlocks the VPM cache path.
SetValue method in object BasicComponent: Set the value corresponding to the given coordinates.
SetValue method in object AnalysisEntity: Sets the value corresponding to the given component.
SetValue method in object AnalysisLocalEntity: Sets the value corresponding to the given component.
SetValues method in object ToleranceUnitBasisValue: Set tolerance unit basis values (in millimeters).
SetValues method in object ManufacturingToolCorrector: Defines the corrector values.
SetVectorLock method in object FittingSettingAtt: Locks or unlocks the VisualizationMode parameter.
SetVelocityColorLock method in object DevAnalysisSettingAtt: Locks or unlocks the VelocityColor parameter.
SetVelocityLimitLock method in object DevAnalysisSettingAtt: Locks or unlocks the VelocityLimit parameter.
SetVia method in object AMPTag: Function to set the via status of the given AMPTag.
SetViaMode method in object Operation: Sets the Via Mode of the Operation.
SetViewAnalysisParameterLock method in object AnalysisGeneralSettingAtt: Locks or unlocks the flag.
SetViewAnalysisRelationLock method in object AnalysisGeneralSettingAtt: Locks or unlocks the flag.
SetViewAssociativityLock method in object FTAInfraSettingAtt: Locks or unlocks the View Associativity setting parameter value.
SetViewBackgroundModeLock method in object Layout2DSettingAtt: Locks or unlocks the ViewBackgroundMode parameter.
SetViewFilterCreationModeLock method in object Layout2DSettingAtt: Locks or unlocks the ViewFilterCreationMode parameter.
SetViewName method in object DrawingView: Sets the prefix, the ident and the suffix of the name of the drawing view.
SetViewName method in object Layout2DView: Sets the prefix, the ident and the suffix of the name of the Layout2D view.
SetViewPointActivityLock method in object WorkGeneralSettingAtt: Locks or unlocks the ViewPointActivity parameter.
SetViewProfileLock method in object FTAInfraSettingAtt: Locks or unlocks the View Profile setting parameter value.
SetViewReferentialLock method in object FTAInfraSettingAtt: Locks or unlocks the View Referential setting parameter value.
SetViewReferentialZoomableLock method in object FTAInfraSettingAtt: Locks or unlocks the View Referential Zoomable setting parameter value.
SetViewerAutoOpenLock method in object SectioningSettingAtt: Locks or unlocks the ViewerAutoOpen parameter.
SetViewerAutoReframeLock method in object SectioningSettingAtt: Locks or unlocks the ViewerAutoReframe parameter.
SetViewerLock2DLock method in object SectioningSettingAtt: Locks or unlocks the ViewerLock2D parameter.
SetViewpointAnimationModeLock method in object VisualizationSettingAtt: Locks or unlocks the ViewpointAnimationMode setting parameter.
SetVisBaseFrmLock method in object ImportD5SettingAtt: Locks or unlocks the VisBaseFrm parameter.
SetVisCoorsysLock method in object ImportD5SettingAtt: Locks or unlocks the VisCoorsys parameter.
SetVisToolFrmLock method in object ImportD5SettingAtt: Locks or unlocks the VisToolFrm parameter.
SetVisWclPathLock method in object ImportD5SettingAtt: Locks or unlocks the VisWclPath parameter.
SetVisibility method in object TCPTrace: Set the TCP trace component (DNBTCPTraceReps) visible (True) or hidden(False).
SetVisibility method in object DrawingDimExtLine: Set visivility of dimension extension line.
SetVisibilityActivityLock method in object WorkGeneralSettingAtt: Locks or unlocks the VisibilityActivity parameter.
SetVisuFormatUnitLock method in object MultiCADSettingAtt: Locks or unlocks the VisuFormatUnit parameter.
SetVisu_Mode_2DLock method in object MigrBatchSettingAtt: Locks or unlocks the "Projection of Space for transparent views" setting parameter.
SetVisualizationModeLock method in object AnalysisSettingAtt: Locks or unlocks the VisualizationMode parameter.
SetViz2DAccuracyModeLock method in object VisualizationSettingAtt: Locks or unlocks the 2DAccuracyMode setting parameter.
SetViz2DFixedAccuracyLock method in object VisualizationSettingAtt: Locks or unlocks the 2DFixedAccuracy setting parameter.
SetViz2DProportionnalAccuracyLock method in object VisualizationSettingAtt: Locks or unlocks the 2DProportionnalAccuracy setting parameter.
SetViz3DAccuracyModeLock method in object VisualizationSettingAtt: Locks or unlocks the Viz3DAccuracyMode setting parameter.
SetViz3DCurveAccuracyLock method in object VisualizationSettingAtt: Locks or unlocks the 3DCurveAccuracy setting parameter.
SetViz3DFixedAccuracyLock method in object VisualizationSettingAtt: Locks or unlocks the 3DFixedAccuracy setting parameter.
SetViz3DProportionnalAccuracyLock method in object VisualizationSettingAtt: Locks or unlocks the Viz3DProportionnalAccuracy setting parameter.
SetVolumeSupport method in object Shell: Set the Support Volume of the faces to modify during Shell operation.
SetVolumeSupport method in object Thickness: Set support of Thickness feature.
SetVolumeSupport method in object SewSurface: Sets the volume support for volume sew surface.
SetVolumeSupport method in object DraftDomain: Value the support of draft.
SetVoxelStaticAnlLock method in object AnalysisSettingAtt: Locks or unlocks the VoxelStaticAnl parameter.
SetVoxelsLock method in object CGRAdhesionSettingAtt: Locks or unlocks the Voxels container activation state.
SetWalkActColorLock method in object HtsTaskDisplaySettingAtt: Locks or unlocks the WalkActColor parameter.
SetWalkActLineTypeLock method in object HtsTaskDisplaySettingAtt: Locks or unlocks the WalkActLineType parameter.
SetWalkActLineWeightLock method in object HtsTaskDisplaySettingAtt: Locks or unlocks the WalkActLineWeight parameter.
SetWalkCurveDefPoints method in object WalkActivity
SetWalkForwardAngleLock method in object HtsGeneralSettingAtt: Locks or unlocks the WalkForwardAngle parameter.
SetWalkForwardDistanceLock method in object HtsGeneralSettingAtt: Locks or unlocks the WalkForwardDistance parameter.
SetWallSurfaceNormal method in object ARCTag: Function to set the Wall Surface Normal associated with the ARC tag.
SetWeldGeometry method in object ARCTag: Function to set the flag for the availability of wall/base normals for the ARC tag.
SetWeldSpeed method in object AMPTag: Function to set the weld speed of the given AMPTag.
SetWhiteModeLock method in object AnalysisSettingAtt: Locks or unlocks the WhiteMode parameter.
SetWindowDefaultHeightLock method in object SectioningSettingAtt: Locks or unlocks the WindowDefaultHeight parameter.
SetWindowDefaultWidthLock method in object SectioningSettingAtt: Locks or unlocks the WindowDefaultWidth parameter.
SetWindowOpenModeLock method in object SectioningSettingAtt: Locks or unlocks the WindowOpenMode parameter.
SetWorkInstructionsLock method in object Export3DXmlSettingAtt: Locks or unlocks the flag.
SetWorkWithVPMCacheLock method in object CDMASettingAtt: Locks or unlocks the VPM Cache Activation mode.
SetXMLDirLock method in object IgpOlpSettingAtt: Locks or unlocks the OLP XML Directory setting parameter.
SetXMLSchemaLock method in object IgpOlpSettingAtt: Locks or unlocks the OLP XML Schema setting parameter.
SetXY method in object Annotation
SetXY method in object Annotation2: method GetXY will never be exposed.
SetXYZ method in object Tag: Sets the Position(X, Y, Z) of the Tag.
SetYPR method in object Tag: Sets the Orientation (Y, P, R) of the Tag.
SetbackValue property in object HybridShapeSweep: Returns or sets the setback value.
SettingController object: Represents the base object for setting controllers.
SettingControllers object: A collection of all the setting controllers objects currently managed by the application.
SettingRepository object
SettingsNode property in object SWKManikin: Returns the settings node of the current manikin.
Setups property in object ManufacturingProcess: Give the List of Setups linked to a Manufacturing Process.
Severity property in object Check: Returns or sets the check severity.
SewSurface object: Represents the sewing operation.
SewingIntersectionMode property in object SewSurface: Returns or sets the sewing mode .
SewingSide property in object SewSurface: Returns or sets the sewing side .
SfdProduct object: Interface to create a SFD Functional System under a Product.
SfmConnectionParameters object: Interface to get the parameters defining the UDF for Slots and Endcuts.
SfmEndcut object: Interface to manage the EndCut on Super Profile.
SfmEndcutManager object: Interface to get information on available endcuts from catalog.
SfmFactory object: Interface to create Structure Functional Modeler Objects.
SfmFunctionFactory object: Gets the Function Factory.
SfmManager object: Services about Structure Functional Modeler applications: SFD and SDD.
SfmMember object: Interface to manage the structure frame modeling member object Role: Allows accessing and setting of member's data.
SfmMember2Points object: Interface to manage Member created with one curve and a reference surface.
SfmMemberCurve object: Interface to manage Member created with one curve and a reference surface.
SfmMemberPlane2Curves object: Interface to manage a Member created with two curves and a plane.
SfmMemberPointLength object: Interface to manage Member created with one point, one direction and a length.
SfmMemberPointUpToLimit object: Interface to manage Member created with one point, one direction and one limit.
SfmMemberSurfSurf object: Interface to manage Member created by the intersection of two surfaces.
SfmObject object: Interface to manage the category of a SfmObject.
SfmObjectExt object: Interface to retrieve the computed attributes of SFM objects.
SfmOpening object: Defines Edition Techniques for Openings created using sketch and 3D Object.
SfmOpeningContoursMgr object: Gets CATIASfmOpeningContoursMgr.
SfmOperationFactory object: Gets the Operation Factory.
SfmPositioningStrategyManager object: Gets CATIASfmPositioningStrategyManager.
SfmProfile object: Interface to manage the structure frame modeling member object Role: Allows accessing and setting of member's data.
SfmReferences object: A Collection of U and V Reference elements for Standard Opening.
SfmReferences property in object SfmFunctionFactory: Gets the list of Sfm References.
SfmSlot object: Interface to Get and Set inputs to existing Slot.
SfmSlots object: Interface to create, remove and access existing slot.
SfmSplitPlate object: Interface to manage the Structure Functional Modeler Split plate object.
SfmSplitPlates object: Interface to manage the Structure Functional Modeler Split Plates object.
SfmStandardContourParameters object: Interface to access Contour Parametrs from/to the collection.
SfmStandardOpening object: Defines Edition Techniques for Standard Openings.
SfmStandardPosStrategyParameters object: Sets the Required data for Positioning the Contour.
SfmStiffener object: Interface to manage the structure frame modeling Stiffener object Role: Allows accessing and setting of Stiffener's data.
SfmStiffenerOnFreeEdge object: Interface to manage different attributes of Stiffener on free edge.
SfmSuperPlate object: Interface to manage the Structure Functional Modeler SuperPlate object.
SfmWeld object: Interface to manage the Structure Functional Modeler Weld object.
SfmWelds object: Interface to manage the Structure Functional Modeler Weld object's collection.
ShaderMode property in object VisualizationSettingAtt: Returns the ShaderMode parameter.
ShadowFittingMode property in object RenderingLight: Returns or sets the light shadow fitting mode.
ShadowMapSize property in object RenderingLight: Returns or sets the light shadow map size.
ShadowObjectStatus property in object RenderingLight: Returns or sets the light shadow status on objet.
ShadowStatus property in object RenderingLight: Returns or sets the light shadow status.
ShadowsStatus property in object RenderingShooting: Returns or sets the shadows status of shooting.
ShadowsStatus property in object RenderingEnvironmentWall: Returns or sets the wall shadow status.
Shaft object: Represents the shaft shape.
ShallowCount method in object ExpertRuleBaseComponentRuntimes: Returns the number of first-level-depth objects in the collection.
ShallowItem method in object ExpertRuleBaseComponentRuntimes: Returns a first-level-depth RuleBase component using its index or its name from the RuleBase collection.
ShallowRemove method in object ExpertRuleBaseComponentRuntimes: Removes an first-level-depth Expert component from the Rule Base collection.
Shape object: Represents the Shape object.
ShapeFactory object: Represents the factory for shapes to create all kinds of shapes that may be needed for part design.
ShapeFactory property in object Part: Returns the part shape factory.
ShapeInstance object: The interface to access a CATIAShapeInstance.
Shapes object: The collection of the shapes making up a body.
Shapes property in object Body: Returns the body's Shapes collection.
Shared property in object ManufacturingMachinableGeometry: Returns or sets the shared state of a ManufacturingMachinableGeometry object.
SharpEdgeRemovalMode property in object VarRadEdgeFillet: Returns or set the sharp edge removal mode for variable edge fillet.
SharpnessAngle property in object HybridShapeHealing: Returns the Sharpness Angle of the healing.
SheetMetalFactory property in object Part: Returns the sheet metal factory of the part.
SheetMetalParameters property in object Part: Returns the sheet metal parameters of the part.
SheetScale property in object Layout2DSheet: Returns or sets the scale of the Layout2D sheet.
Sheets property in object DrawingRoot: Returns the collection of drawing sheets of the drawing document.
Sheets property in object DrawingDocument: Returns the collection of drawing sheets of the drawing document.
Sheets property in object Layout2DRoot: Returns the collection of Layout2D sheets of the part document.
Shell object: Represents the shell shape.
ShiftValue property in object ShiftedProfileTolerance: Retrieves or sets shift value of tolerance zone (in millimeters).
ShiftedProfile property in object FTASettingAtt: Returns or sets the Shifted Profile parameter.
ShiftedProfileTolerance object: Interface for accessing shifted tolerance zone informations of a TPS.
ShiftedProfileTolerance method in object Annotation: Get the annotation on the ShiftedProfileTolerance interface.
ShiftedProfileTolerance method in object SemanticGDT: Role: Returns the ShiftedProfileTolerance interface.
Shot object: The interface to access a CATIAShot.
Shots object: The collection of all shot objects contained in the current sampled.
Shots property in object Sampled: Returns or sets the Sampled object.
ShoulderRaised property in object SWKErgoRULA: This property is True if the shoulder of the manikin is raised, given the manikin's current posture.
Show method in object FastenerGroup: Shows all the entities in the fastener group.
ShowActivation property in object TreeVizManipSettingAtt: Retrieves or Sets the visualization Show/NoShow's mode applied to the specification tree.
ShowCompletionDialogBox property in object IgesSettingAtt: Returns or sets the Show/No Show dialog box setting parameter value.
ShowLicense property in object LicenseSettingAtt: Retrieves or Sets the show license .
ShowOnlyFilteredObjects property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the ShowOnlyFilteredObjects attribute.
ShowPanel method in object CD5SaveOperation: Shows the Save dialog as per the cusomization done so far.
ShowParameters property in object FunctionalSystemSettingAtt: Returns or sets the ShowParameters parameter.
ShowRelations property in object FunctionalSystemSettingAtt: Returns or sets the ShowRelations parameter.
ShowSynchroStatusOfLocalParamCache property in object FunctionalSystemSettingAtt: Returns or sets the ShowSynchroStatusOfLocalParamCache parameter.
Shuttle object: The interface to access a CATIAShuttle.
Shuttles object: The interface to access a CATIAShuttles Using this prefered syntax will enable mkdoc to document your class.
Side property in object Thread: Returns the thread or tap side.
Side property in object Constraint: Returns or sets the constraint side.
SideOrientation property in object SfmStiffener: Returns or sets the side orientation.
SideOrientation property in object SfmStiffenerOnFreeEdge: Returns or sets the side orientation.
SideStepAngle property in object HtsGeneralSettingAtt: Returns or sets the SideStepAngle parameter.
Silhouette object: Interface to access a CATIASilhouette.
SilhouetteShapeName method in object Silhouettes: Returns the name of the associated shape.
Silhouettes object: Interface to compute Silhouettes.
Silhouettes property in object OptimizerWorkBench: Returns or sets the constraint driving mode.
SimTraceSettingAtt object: Interface to handle parameters of Infrastructure-DELMIA Infrastructure-Simulation Trace Tools Options Tab page.
SimplificationShapeName method in object Simplifications: Returns the name of the associated shape.
Simplifications object: Interface to compute Simplifications.
Simplify property in object HybridShapeTrim: Returns or sets whether the simplification of the resulting topology is or should be activated.
SimulationInitState object: Interface used to save/restore the simulation initial state.
SimulationSettingAtt object: Interface to handle parameters of DELMIA Simulation Tools Options Tab page Role: This interface is implemented by a component which represents the controller of Simulation Tools Options parameter settings.
SingularColor property in object RobAnalysisSettingAtt: Returns or sets the SingularColor parameter.
Size property in object File: Returns the size of the file.
Size method in object DrawingView: Returns the bounding box of the drawing view.
Size method in object Layout2DView: Returns the bounding box of the Layout2D view.
Size property in object TreeVizManipSettingAtt: Retrieves or Sets the number of characters shown for the text of the specification tree.
Size property in object ArrangementArea: Returns the Size of the ArrangementArea.
Size property in object ManufacturingOutput: Returns the number of bytes written to this data output.
SizeControl property in object CacheSettingAtt: Return or sets the cache size control.
SizeType property in object TreeVizManipSettingAtt: Retrieves or Sets the type of size applied to the text of the specification tree.
Sketch object: The Sketch is a 2D based element comprising constrained 2D geometrical elements.
Sketch property in object StrPlate: Returns the sketch object of the plate.
Sketch property in object SketchBasedShape: Returns the sketch the shape is based on.
Sketch property in object AssemblyHole: Returns the hole positioning sketch.
Sketch property in object AssemblyPocket: Returns the pocket sketch.
SketchBasedShape object: Represents the shapes based on sketched 2D geometry.
SketchComponent property in object AssemblyHole: Returns the component containing the hole positioning sketch.
SketchComponent property in object AssemblyPocket: Returns the component containing the pocket sketch.
Sketches object: The body's collection of sketches not yet used by any shape.
Sketches property in object Body: Returns the body's Sketches collection.
SkinDisplayed property in object SWKBody: Returns or sets the display of the manikin surfaces (skin).
SkinResolution property in object SWKBody: Returns or sets the manikin skin resolution.
Slide method in object SchComponent: Slide a component (applicable to inserted component only).
Sliding property in object ABQSurfaceToSurfaceContact: Sets or returns the sliding type in a contact pair.
Sliding_Type enum: Sliding types.
SliversAndCrack property in object AutoFillet
SliversAndCracks property in object AutoFillet: Returns or sets the slivers face.
Slot object: Represents the slot shape.
SmoothActivity property in object HybridShapeSweepLine: Returns whether the sweeping operation is smoothed.
SmoothActivity property in object HybridShapeSweepConic: Returns or sets information whether sweeping operation is smoothed or not.
SmoothActivity property in object HybridShapeSweepCircle: Returns or sets information whether a sweeping operation is smoothed or not.
SmoothActivity property in object HybridShapeSweepExplicit: Returns or sets information whether sweeping operation is smoothed or not.
SmoothAmplitude property in object ABQLoad: Sets or returns the Smooth Amplitude, given the refernce of the Smooth amplitude.
SmoothAmplitude property in object ABQBoundaryCondition: Sets or returns the Smooth Amplitude, given the reference of the Smooth amplitude.
SmoothAngleThreshold property in object HybridShapeLoft: Returns or sets the angular threshold under which discontinuities (moving frame, tangency net on reference surface) will be smoothed.
SmoothAngleThreshold property in object HybridShapeBlend: Returns the angular threshold.
SmoothAngleThreshold property in object HybridShapeSweepLine: Returns the angular threshold.
SmoothAngleThreshold property in object HybridShapeSweepConic: Returns angular threshold under which discontinuities .
SmoothAngleThreshold property in object HybridShapeSweepCircle: Returns the angular threshold.
SmoothAngleThreshold property in object HybridShapeSweepExplicit: Returns angular threshold.
SmoothAngleThresholdActivity property in object HybridShapeLoft: Returns or sets whether a angular threshold is allowed or not during lofting operation in order to smooth it.
SmoothAngleThresholdActivity property in object HybridShapeBlend: Returns or sets information whether a blending operation is smoothed or not.
SmoothDeviation property in object HybridShapeLoft: Returns or sets the deviation value (length) allowed during lofting operation in order to smooth it.
SmoothDeviation property in object HybridShapeBlend: Returns the deviation value (length) from guide curves allowed during a sweeping operation in order to smooth it.
SmoothDeviationActivity property in object HybridShapeLoft: Returns or sets whether a deviation is allowed or not during lofting operation in order to smooth it.
SmoothDeviationActivity property in object HybridShapeBlend: Returns or sets information whether a deviation from guide curves is allowed or not.
SmoothMode property in object AnalysisColorMap
SmoothingType property in object HybridShapeProject: Sets or Gets Smoothing Type.
SmoothingType property in object HybridShapeCurvePar: Returns or sets the smoothing Type.
SnapAngleDistance property in object ManipSettingAtt
SnapPosition property in object ManipSettingAtt
Snook_MaximumWeight property in object SWKErgoLiftLower: This field is set to a valid value for the Snook/Ciriello 1991 analysis only.
Solid object: Represents an imported solid object.
SolidCombine object: The interface to access a CATIASolidCombine.
SolidMU property in object V4V5SpaceSettingAtt: Returns or sets the activation state of mode for isolated Solids Mock-Up migration Role: Returns or sets the state of mode for isolated Solids Mock-Up migration.
SolidMode property in object HybridShapeIntersection: Returns or sets the SolidMode flag for intersect.
SolutionCase property in object ABQAnalysisCase: Returns the Abaqus solution case associated with this analysis case.
SolutionNo property in object HybridShapeSweepLine: Returns or sets the choice number, which corresponds to each solution of a given linear sweep case.
SolutionNo property in object HybridShapeSweepExplicit: Returns or sets the choice number, which corresponds to each solution of a given explicit sweep case.
SolutionSteps property in object ABQSolutionCase: Returns the Abaqus solution steps associated with this solution case.
SolutionType property in object HybridShapeProject: Returns or sets the solution type.
SolutionType property in object HybridShapeLineBisecting: Returns or sets the solution type.
SolutionTypeCombine property in object HybridShapeCombine: Returns or sets whether the curves that create the combined curve are or should be extruded along normals to the curve planes or along given directions.
Solve method in object ConstraintSatisfaction: Solves the constraint satisfaction problem.
SolveType property in object ExpertRuleBaseRuntime: Returns or sets the solve option.
SortedItem method in object Materials: Returns a material from its index in the sorted Material collection.
Sound property in object AnnotatedView: Returns or sets the path of the sound file associated with the annotated view.
Source property in object ABQJob: Sets or returns the source for analysis.
Source property in object Product: Returns or sets the product's source.
SourceElement property in object Solid: Returns the source element of the imported solid.
SourceProduct property in object Solid: Returns the source product instance of the imported solid.
SourceType property in object HybridShapeReflectLine: Returns or sets whether the reflectline curve is or should be created with infinite light source (cylindrical) or with finite point light source (conical).
Spacing property in object LinearRepartition: Returns the distance between two consecutive shapes along the repartition direction.
SpecV4SettingAtt object: Represents the V4/V5 SPEC setting controller object.
SpecifiedCycleTime property in object HumanTask
SpecifiedJointSpeed property in object HumanTask
SpecifiedModes property in object ABQFHOutputRequest: For frequency step: Sets request for output results at specified modes.
SpecifiedOutputVariables property in object ABQFHOutputRequest: Sets the specified variables for which results are requested.
SpecifiedSecPts property in object ABQFHOutputRequest: Sets request for output results at specified section points.
SpecsAndGeomWindow object: Represents a window featuring a specification viewer and a geometry viewer.
SpecsViewer object: Represents the specification tree viewer.
SpecsViewer property in object SpecsAndGeomWindow: Returns the specifications viewer.
Specular property in object RenderingLight: Returns or sets the light specular intensity of a light.
SpecularCoefficient property in object RenderingMaterial: Returns or sets the specular coefficient of a material.
SpecularExponent property in object RenderingMaterial: Returns or sets the specular exponent of a material.
Speed property in object Track: Returns or sets the track speed.
SpeedPercent property in object MoveHomeAct: This property returns and sets the speed value percentage for the move activity.
SpeedPercent property in object MoveToPostureActivity
SpeedPercent property in object MoveJointsAct: This property returns and sets the speed value percentage for the activity.
SphereLightRadius property in object RenderingLight: Returns or sets the sphere light area radius.
Spine property in object HybridShapeBlend: Returns or sets a curve used as spine for coupling in Blend computation.
Spine property in object HybridShapeSweepLine: Returns or sets the sweep operation spine (optional).
Spine property in object HybridShapeSweepConic: Returns or sets the spine (optional) for sweep operation.
Spine property in object HybridShapeSweepCircle: Returns or sets the sweep operation spine (optional).
Spine property in object HybridShapeIntegratedLaw: Gets or sets Spine for implicit law.
Spine property in object HybridShapeSweepExplicit: Returns or sets the spine (optional) for sweep operation.
Spine property in object HybridShapeFilletBiTangent: Returns or Sets the spine feature.
Spline2D object: Class defining a spline in 2D Space.
Split object: Represents the split operation.
Split method in object Sampled: Returns or sets the Sampled object.
SplitFunctionalObjectName property in object FunctionalSystemSettingAtt: Returns or sets the SplitFunctionalObjectName parameter.
SplitPlates property in object SfmSuperPlate: Returns the SplitPlates.
SplitPlatesObjects property in object SfmSuperPlate: Returns the SplitPlates.
SplitProfiles property in object SfmProfile: Returns the SplitProfiles.
SplittingComponent property in object AssemblySplit: Returns the component containing the splitting element.
SplittingElement property in object AssemblySplit: Returns the splitting element.
SplittingSide property in object Split: Returns or sets the splitting side .
SplittingSide property in object ReplaceFace: Returns or sets the splitting side .
SplittingSide property in object AssemblySplit: Returns or sets the splitting side.
SpringDef property in object ABQSpringConnectionProperty: Sets or returns the definition of spring.
SpringDef_Type enum
SpringDof_Type enum
SpringType property in object ABQSpringConnectionProperty: Sets or returns the type of spring.
SpringType_Type enum
Stabilization property in object ABQGeneralStaticStep: Returns a boolean indicating whether the stabilization option was selected.
StabilizationMagnitude property in object ABQGeneralStaticStep: ets and Returns the damping factor if the stabilization method is FACTOR.
StabilizationMethod property in object ABQGeneralStaticStep: Returns or sets the stabilization method if the Stabilization option is selected.
StabilizationStiffness property in object ABQGasketProperty
StabilizationStiffnessType property in object ABQGasketProperty
StabilizationStiffness_Type enum: Stabilization stiffness types.
Stabilization_Type enum: Stabilization types.
Standard property in object AnnotationSet: Retrieves the Parent Standard defined at set creation.
Standard property in object DrawingRoot: Returns or sets the drawing standard of the drawing document.
Standard property in object DrawingDocument: Returns or sets the drawing standard of the drawing document.
Standard property in object Layout2DRoot: Returns or sets the DrawingStandard of the part document.
Standard property in object FTAInfraSettingAtt: Returns or sets the Tolerancing Standard setting parameter value.
Standard property in object PspFunctional: Return Standard.
StandardThickness property in object StrPlate: Returns the standard thickness following the support orientation.
Start property in object DrawingTextRange: Returns the starting character position of the drawing text range.
Start method in object BehaviorVBScript: Inform Client VB has Started.
StartAngle property in object HybridShapeCircle: Returns the circle start angle.
StartCommand method in object Application: Starts a CATIA command.
StartEndCutName property in object StrObjectExt: Returns the Start EndCut name of the SR1 object.
StartEndCutName property in object SfmObjectExt: Returns the Start EndCut name of the structural object.
StartExtremity property in object StrMember: Returns the member's start extremity object.
StartExtremityContinuity property in object HybridShapeCurveSmooth: Returns or sets the continuity condition (curvature, tangency or point) applied to the smoothed curve with regard to the input curve at the start extremity of the input curve.
StartParam property in object HybridShapeIntegratedLaw: Gets start parameter.
StartPoint property in object HybridShapeConic: Returns or sets the conic start point.
StartPoint property in object Curve2D: Returns the start point of the curve.
StartPoint property in object HybridShapeSpine: Retuns or sets the start point of the spine.
StartPoint method in object ManufacturingPattern: Sets a point of a Manufacturing Pattern as the start point.
StartPointOnCrvCurve property in object SfmMember2Points: Returns or sets the point on curve information: curve, ratio or length mode, offset and orientation.
StartPointOnCrvMode property in object SfmMember2Points
StartPointOnCrvOffset property in object SfmMember2Points
StartPointOnCrvOffsetParam property in object SfmMember2Points
StartPointOnCrvOrientation property in object SfmMember2Points
StartPointSpec property in object SfmMember2Points: Returns or sets the point.
StartSegment property in object SWKIKConstraint: Returns or sets the first segment of the body to be driven by this constraint.
StartTangent property in object HybridShapeConic: Returns or sets the tangent direction at the conic start point.
StartUpConnectors property in object PspClass: Returns a List of start-up Connector object classes.
StartUpFunctions property in object PspClass: Returns a List of start-up Function object classes.
StartUpPhysicals property in object PspClass: Returns a List of start-up physical object classes.
StartUp_Model_For_Drawing property in object MigrBatchSettingAtt: Retrieves or sets the state of the "Initial Drawing Path" setting parameter.
StartWorkbench method in object Application: Starts a CATIA workbench.
StartingAngle property in object HybridShapeHelix: Reads the helix starting angle.
StartingPoint property in object HybridShapeHelix: Reads / Changes the starting point of the Helix.
StartingRadius property in object HybridShapeSpiral: Reads / Changes the starting radius of the Spiral.
StartupType property in object PspObject: Returns the Startup type of the object.
StateName property in object DNB3DState: Returns or sets the Name of the 3D State.
StatesCount property in object DNB3DStates: Returns the number of 3D State objects in the collection.
StaticCull property in object VisualizationSettingAtt: Returns the StaticCull parameter.
StaticLOD property in object VisualizationSettingAtt: Returns the StaticLOD parameter.
Status property in object ABQLoad: Returns the propagating status of the load.
Status property in object CD5SaveItem: Returns (gets) the Save status of the item.
Status property in object Constraint: Returns the constraint status.
Status property in object ABQOutputRequest: Returns the propagating status of the output request.
Status property in object Conflict: Returns or sets the status of the conflict.
Status property in object ABQBoundaryCondition: Returns the propagating status of the boundary condition.
Status method in object ExpertCheckRuntime: Returns the Status of the check.
Status method in object ExpertRuleSetRuntime: Returns the Status of the ruleset: 1=OK, 0=KO.
StatusBar property in object Application: Returns or sets the text displayed in the application's window status bar.
StdDev property in object SWKAnthroVariable: Returns the standard deviation of the variable.
Step property in object FreeParameter: Returns or sets the initial step used by the optimisation to look for a better solution.
StepByStepUpdateAndReroute property in object SpecV4SettingAtt: Returns or sets the activation state of Step By Step Update And Reroute.
StepNum property in object ABQInitialTemperature: Sets or returns the step number from which to read the temperature data.
StepSettingAtt object: The interface to access a CATIAStepSettingAtt.
Steps property in object ABQAnalysisCase: Returns the Abaqus analysis steps associated with this analysis case.
StereoMode property in object VisualizationSettingAtt: Returns the StereoMode parameter.
StiDBChildren object: Represents all the Children of a CATIAStiDBItem.
StiDBItem object: Represents the SmarTeam Integration Object, that is to say the Document coming from SmarTeam database.
StiEngine object: Represents the SmarTeam Integration Engine, that is to say the entry point to the CATIA/SmarTeam Integration.
Stiffener object: Represents the stiffener shape.
StiffenerEndCut property in object EndCutESSObjectSettingAtt
StockGeometriesCount method in object ManufacturingSetup: Returns the number of stock geometries from a Manufacturing Setup.
StopURConcatenation method in object Application: Concatenate all the undo steps created since the start call.
StrAnchorPoint object: Represents an anchor point.
StrAnchorPoints object: A collection of the anchor points of a section object.
StrAnchorPoints property in object StrSection: Returns the collection of anchor points.
StrComputeServices object: Represents a structure service object.
StrComputeServices property in object StrWorkbench: Returns the compute services object.
StrCutback object: Represents the cutback object.
StrCutoutFeature object: Represents a Cutout Feature.
StrFeatureFactory object: Represents the Factory Object for Structure Features.
StrFoundation object: Represents a structure foundation assembly.
StrFoundations object: A collection of the Foundation objects contained in a given Product object of a ProductDocument object.
StrMember object: Represents a member object.
StrMemberExtremity object: Represents an extremity of a member object.
StrMembers object: A collection of the Member objects contained in a given Product object of a ProductDocument object.
StrNibblingFeature object: Represents a Nibbling Feature.
StrObject object: Represents a structure object.
StrObjectExt object: Represents a structure object.
StrObjectFactory object: Represents the factory object for all the structure objects.
StrParam object: Represents the string parameter.
StrPlate object: Represents a structure plate object.
StrPlates object: A collection of the Plate objects contained in a given Product object of a ProductDocument object.
StrSection object: Represents the section object.
StrWorkbench object: Represents the structure workbench object.
Stride property in object WalkActivity
StrikeThru property in object DrawingTextProperties: Returns or sets the drawing text font strikethrough property.
StringUsedAsCarriageReturn property in object FunctionalSystemSettingAtt: Returns or sets the StringUsedAsCarriageReturn parameter.
Style property in object PointFastener: ets the CGR Style representation for the fastener in the 3D Viewer.
Style property in object FastenerGroup: ets the CGR Style representation for the Spot Welds in the 3D Viewer.
StyleSheetDir property in object FASReportingSettingAtt: Gets value of "OLP Robot Program Directory" parameter.
StyleSheetPath property in object WorkGeneralSettingAtt: Returns or sets the StyleSheetPath parameter.
SubFolders property in object Folder: Returns the folder collection of the folder.
SubList method in object Relations: Returns a sub-collection of relations aggregated to an object.
SubList method in object Parameters: Returns a sub-collection of parameters aggregated to an object.
SubShuttles property in object Shuttle: Returns any shuttles that are contained within the current shuttle.
SubType property in object StrNibblingFeature: Returns or Sets Nibbling SubType on Current Nibbling.
SubType property in object HybridShapeSweepExplicit: Returns or sets the explicit sweep subtype.
SubTypes property in object ArrNomenclature: Returns the collection of subtype UserNomenclatures within this UserNomenclature.
SubmitJob method in object ABQJob: Submits the job.
Subscript property in object DrawingTextProperties: Returns or sets the drawing text font subscript property.
SubspaceFrictionDamping property in object ABQIAABQSteadyStateLinDynStepSubspaceVB: Sets or returns if the Subspace Responase.
SubspaceProjectionType property in object ABQIAABQSteadyStateLinDynStepSubspaceVB: Returns or sets Subspace Projection Type.
SubspaceResponase property in object ABQIAABQSteadyStateLinDynStepSubspaceVB: Returns or sets Subspace Responase.
SucceedItem method in object ExpertReportObjects: Retrieves a report component from a succeeded tuples collection, using its index or its name from the Check collection.
Succeeds property in object ExpertCheckRuntime: Returns the list of the tuples that satisfy this check.
SupRange property in object FreeParameter: Returns or sets the superior bound of the free parameter object.
SuperType property in object Annotation: Get the Super Type.
SuperType property in object Annotation2: Gets the Super Type.
SuperTypeName property in object ArrNomenclature
Superscript property in object DrawingTextProperties: Returns or sets the drawing text font superscript property.
Support property in object HybridShapeTrim: Returns or sets the support element.
Support property in object HybridShapeSplit: Returns or sets the support element.
Support property in object HybridShapeSpiral: Reads / Changes the spiral plane support.
Support property in object HybridShapeCorner: Returns or sets the corner support.
Support property in object StrPlate: Returns or sets the support of the plate.
Support property in object HybridShapeDevelop: Returns or sets the support revolution surface on which the development is operated.
Support property in object HybridShapeProject: Returns or sets the support element.
Support property in object HybridShapeExtract: Returns or sets the support for the extract.
Support property in object StrMember: Retrieves the result support object.
Support property in object HybridShapeLinePtPt: Returns or Sets the supporting surface.
Support property in object HybridShapeCurvePar: Returns or sets the support of the curve.
Support property in object HybridShapeBoundary: Returns or sets the support surface around which the boundary is computed.
Support property in object HybridShapeExtrapol: Returns or sets the support surface.
Support property in object HybridShapeLinePtDir: Returns or Sets the supporting surface.
Support property in object HybridShapeMidSurface: Returns or sets Support Body.
Support property in object HybridShapeCircleCtrPt: Returns or sets the circle support surface.
Support property in object HybridShapeReflectLine: Returns or sets the support surface used to create the reflectline.
Support property in object HybridShapeCurveSmooth: Returns or sets the support of the curve.
Support property in object HybridShapeCircleCtrRad: Returns or sets the circle support surface.
Support property in object HybridShapeLineTangency: Returns or Sets the support surface.
Support property in object HybridShapePointBetween: Returns or Sets the support.
Support property in object HybridShapeCircle3Points: Returns or sets the circle support surface.
Support property in object HybridShapeLineBiTangent: Returns or Sets the supporting surface.
Support property in object HybridShapeLineBisecting: Returns or sets the support used to create the bisecting line.
Support property in object HybridShapeRollingOffset: Role: To manage the support on the object.
Support property in object HybridShapeExtremumPolar: returns or sets the support (if exist).
Support property in object SfmProfile: Returns the member's support.
Support property in object HybridShapeCircle2PointsRad: Returns or sets the circle support surface.
Support property in object SfmSuperPlate: Returns the SuperPlate's support.
Support property in object HybridShapeCircleTritangent: Returns or sets the circle support surface.
Support property in object HybridShapeCircleCenterTangent: Returns or sets the circle support surface.
Support property in object HybridShapeCircleBitangentPoint: Returns or sets the circle support surface.
Support property in object HybridShapeCircleBitangentRadius: Returns or sets the circle support surface.
SupportName property in object SfmObjectExt: Returns the Support Name of the structural object.
SupportOffset property in object SfmObjectExt: Returns the Support Offset of the structural object.
SupportOffset property in object SfmSuperPlate: Returns or sets the SuperPlate's support offset.
SupportOffsetParam property in object SfmSuperPlate
SupportPlane property in object HybridShapeConic: Returns or sets the conic supporting plane.
SupportProperty property in object ABQGasketProperty: Sets or returns the 3D structrel property.
SupportSurface property in object AutoFillet: Returns or sets the support surface.
SupportedPlateName property in object SfmObjectExt: Returns the name of the supported plate for the structural object.
SupportsTrimMode property in object HybridShapeFilletBiTangent: Returns or Sets whether support surfaces are trimmed or not.
SupportsTrimMode property in object HybridShapeFilletTriTangent: Returns or sets whether support surfaces are trimmed or not.
SuppressEnumerateValues method in object IntParam: Resets the status of the object to a single value object.
SuppressEnumerateValues method in object StrParam: Resets the status of the object to a single value object.
SuppressEnumerateValues method in object RealParam: Resets the status of the object to a single value object.
SuppressMode property in object HybridShapeOffset: Returns or sets suppress mode.
Surface property in object SurfaceBasedShape: Returns or sets the surface.
Surface property in object HybridShapeLineAngle: Role: Get the support surface.
Surface property in object HybridShapeWrapCurve: Returns or sets the surface to deform of the WrapCurve.
Surface property in object HybridShapeLineNormal: Returns or Sets the surface to which the line will be normal.
Surface property in object HybridShapeWrapSurface: Returns or sets the reference surface to deform of the WrapSurface.
Surface property in object HybridShapePlaneTangent: Role: Get the surface to which the plane is to be tangent.
Surface property in object HybridShapePointOnSurface: Returns or Sets the surface.
SurfaceAccuracy property in object Export3DXmlSettingAtt: Returns or sets the surface accuracy.
SurfaceArea property in object StrObjectExt: Returns the Surface Area of the SR1 object.
SurfaceArea property in object SfmObjectExt: Returns the Surface Area of the structural object.
SurfaceBasedShape object: Represents the shapes based on Surface.
SurfaceElementsLocation property in object PartInfrastructureSettingAtt: Returns or sets the "SurfaceElementsLocation" parameter.
SurfaceReference property in object StrMember: Retrieves or sets the surface reference object for the member.
SurfaceToUnfold property in object HybridShapeUnfold: Returns or sets the surface to unfold.
SurfaceToUnfold property in object HybridShapeTransfer: Returns or sets the surface to unfold.
SurfaceType property in object HybridShapeUnfold: Returns or sets the type of surface to unfold.
SurfacicWeigth property in object CompositesMaterial: returns or set the surfacic weigth defined in Composites tab in kg per m2.
Suspend method in object BehaviorVBScript
SwapAngularLimitations method in object SWKBody: Swap the angular limitations of the body.
SwapAngularLimitations method in object SWKSegment: Swap the angular limitations of the segment.
SwapMasterSlave property in object ABQFastenedPair: Sets or returns the swap master/slave surface flag.
SwapMasterSlave property in object ABQSurfaceToSurfaceContact: Returns the activation status if the master surface is swapped as slave surface.
SwapMasterSlave property in object ABQFastenedConnectionEnhancement: Sets or returns the swap master/slave surface flag.
SwapPosture method in object SWKBody: Swap the posture with the equivalent segment, on the other side of the manikin.
SwapPosture method in object SWKSegment: Swap the posture with the equivalent segment, on the other side of the manikin.
SwapPosture method in object SWKSegmentNode: Swap the posture with the equivalent segment node, on the other side of the manikin.
SwapPrefAngles method in object SWKBody: Swap the preferred angles of the body.
SwapPrefAngles method in object SWKSegment: Swap the preferred angles of the segment.
Sweep object: Represents the sweep shape.
SweptVolume object
SweptVolumes object: Interface to compute swept volumes.
SweptVolumes property in object OptimizerWorkBench: Returns SweptVolumes.
Swing property in object WalkActivity
Switch method in object SchCompGraphic: Replace the input image object with an image of the graphical representation with the input name.
SwitchAll method in object SchCompGraphic: Replace all occurances of the images of this component with those of the graphical representation with the input name.
SwitchEndTangentDirection method in object HybridShapeConic: Inverts the tangent direction orientation at the conic end point.
SwitchIntermediateTangentDirection method in object HybridShapeConic: Inverts the tangent direction orientation of one of the conic intermediate points.
SwitchOn property in object AnnotationSet: Gets or Sets Annotation Set Visualization.
SwitchStartTangentDirection method in object HybridShapeConic: Inverts the tangent direction orientation at the conic start point.
SwitchToConstFilletType method in object VarRadEdgeFillet: Changes the type of EdgeFillet to constant EdgeFillet and return it.
SwitchToVarFilletType method in object ConstRadEdgeFillet: Changes the type of EdgeFillet to variable EdgeFillet and return it.
Symbol property in object Unit: Returns the symbol associated to the unit.
Symbol property in object PointFastener: ets the symbol for representation for the fastener in the 3D Viewer.
Symbol property in object FastenerGroup: ets the symbol for representation for the Spot Welds in the 3D Viewer.
SymbolsSide property in object DrawingDimension: Returns or sets symbol side of dimension line.
SymetricValue property in object DimensionLimit: Returns or sets whether the dimension limit is symmetric.
SymmetricalExtension property in object HybridShapeExtrude: Returns or Sets the Symmetrical Extension of Extrude (Limit 2 = -Limit 1).
SymmetricalExtension property in object HybridShapeCylinder: Gets or Sets the symmetrical extension of Cylinder (Length 2 = -Length 1).
Symmetry object: Represents the shape symmetry feature object.
SyncAnlSpecs property in object AnalysisSettingAtt: Returns or sets the SyncAnlSpecs parameter.
SyncTimeAndSpeedInSimulation property in object HtsGeneralSettingAtt: Returns or sets the SyncTimeAndSpeed parameter.
Synchronize method in object DesignTable: Synchronizes the design table with its source file.
Synchronize method in object AsySimActivity: Updates the simulation world up to this activity.
SynchronizeHull method in object SfmManager: Synchronize PlaneSystems according with the PRM resources.
SynchronizePlanes method in object SfmManager: Synchronize PlaneSystems according with the PRM resources.
SynchronizeStatus method in object ExpertRuleBaseRuntime: Returns the Synchronize information.
SystemConfiguration object: Provides abstractions to resources which depend on the platform or the current configuration.
SystemConfiguration property in object Application: Returns the system configuration object (an object which provides access to system or configuration dependent resources).
SystemService object: Represents an object which provides system services.
SystemService property in object Application: Returns system services.
setMaximumActivity method in object DefeaturingFilterWithRange
setMaximumValue method in object DefeaturingFilterWithRange
setMinimumActivity method in object DefeaturingFilterWithRange: Sets the defeaturing minimum or maximum value activity of the filter for the given range id.
setMinimumValue method in object DefeaturingFilterWithRange: Sets the minimum or maximum value of the filter for the given range id.
set_DPELoginInfo method in object OrderGenerator: Set DPE Login Information.
set_DefaultValues method in object ManufacturingMachine: Initialise the Manufacturing Machine parameters.
set_Description method in object FunctionalObjectProxy: set the description attached to the proxi.
set_Export3DXML method in object OrderGenerator: Set Export 3D XML Flag.
set_ExportBlocks method in object DxfSettingAtt: Set the value of the Export Layer Name option.
set_ExportDimensionsAsDimensions method in object DxfSettingAtt: Set the value of the Export Dimensions As Dimensions option.
set_ExportImageCapture method in object OrderGenerator: Set Export Image Capture Flag.
set_ExportJobXML method in object OrderGenerator: Set Export Job XML Flag.
set_ExportLayerName method in object DxfSettingAtt: Set the value of the Export Layer Name option.
set_ExportMode method in object Ig2SettingAtt: Set the Export Mode option value.
set_ExportMode method in object DxfSettingAtt: Set the Export Mode option value.
set_ExportPrecXML method in object OrderGenerator: Set Export Precedence XML Flag.
set_ExportSheets method in object Ig2SettingAtt: set the Exported Sheets option value.
set_ExportSheets method in object DxfSettingAtt: set the Exported Sheets option value.
set_ExportVersion method in object DxfSettingAtt: Set the Export Version option value.
set_ExportViewAsViewport method in object Ig2SettingAtt: Set the value of the Export Views as Viewports option.
set_ExportViewAsViewport method in object DxfSettingAtt: Set the value of the Export Views as Viewports option.
set_FTP method in object OrderGenerator: Set FTP Flag.
set_FTPServerInformation method in object OrderGenerator: Set FTP Information.
set_FilterInputString method in object OrderGenerator: Specifies the filters to be applied while loading the project.
set_GeneratePackNGo method in object OrderGenerator: Set Generate PackNGo Flag.
set_GenerateSMGMappingXML method in object OrderGenerator: Set Generate SMG Mapping XML Flag.
set_GenerateSMGXML method in object OrderGenerator: Set Generate SMG XML Flag.
set_GenerateSMGXmlExePath method in object OrderGenerator: Set Generate SMG XML EXE Path.
set_ImportDestinationView method in object Ig2SettingAtt: Set the destination view.
set_ImportDftStandard method in object Ig2SettingAtt: Set the name of the Drafting standard, which define the standard of the resulting CATDrawing file.
set_ImportDftStandard method in object DxfSettingAtt: Set the name of the Drafting standard, which define the standard of the resulting CATDrawing file.
set_ImportDimensions method in object Ig2SettingAtt: Set the Import dimensions option value.
set_ImportDimensions method in object DxfSettingAtt: Set the Import dimensions option value.
set_ImportDxfStandard method in object DxfSettingAtt: Set the name of the Dxf standard, which define the different mapping used at import.
set_ImportEndPoints method in object Ig2SettingAtt: Set the Create End Points option value.
set_ImportEndPoints method in object DxfSettingAtt: Set the Create End Points option value.
set_ImportKeepModelSpace method in object DxfSettingAtt: Set the value of the Keep Model Space option.
set_ImportMapLayerOn2DL method in object DxfSettingAtt: Set the value of Map Layer On 2DL sheet option.
set_ImportPaperSpacesInBackground method in object DxfSettingAtt: Set the value of the Paper Spaces in Background option.
set_ImportScaleDenominator method in object DxfSettingAtt: Get the denominator value of the scale factor.
set_ImportScaleNumerator method in object DxfSettingAtt: Set the numerator value of the scale factor.
set_ImportUnit method in object Ig2SettingAtt: Set the import unit.
set_ImportUnit method in object DxfSettingAtt: Set the import unit.
set_LitePackNGo method in object OrderGenerator: Set Lite PackNGo Flag.
set_LoadContext method in object OrderGenerator: Set Load Context Type.
set_LoadPositions method in object OrderGenerator: Set Load Positions Type.
set_ManufacturingContext method in object OrderGenerator: Set Manufacturing Context Flag.
set_ProcessName method in object OrderGenerator: Set Process Name.
set_RequestType method in object OrderGenerator: Set Request Type.
set_RequestedNodeDetails method in object OrderGenerator: Set Requested Node Details.
set_SetEncryptionMode method in object OrderGenerator: Set Encryption Mode.
set_SpecifiedCycleTime method in object HumanTask
set_SpecifiedJointSpeed method in object HumanTask: sets the joint speed on the specified task(speed should be between 0.
set_TransactionID method in object OrderGenerator: Set Transaction Type.
set_UpdatereleaseTable method in object OrderGenerator: Set Update Release Table Flag.
set_Zip method in object OrderGenerator: Set Zip Flag.
sinkTemperature property in object ABQFilmCondition: ets or returns the reference sink temperature.
swap_OffsetSide method in object ThickSurface: Swap the side of the offset.