FTAInfraSettingAtt (Object)

Represents the FT&A (Functional Tolerancing & Annotation) infrastructure setting controller object.
Role: The FT&A infrastructure setting controller object deals with the setting parameters displayed in:

Properties


Property AllowDistortions() As
Returns or sets the Allow Distortions setting parameter value.
True if the Allow Distortions setting parameter is checked and thus enables distorsions.
Role: The Allow Distortions setting parameter defines whether grid spacing and graduations are the same horizontally and vertically (no distorsion) or not (distorsions enabled).
Property GridDisplay() As
Returns or sets the Grid Display setting parameter value.
True if the Grid Display setting parameter is checked and thus enables the grid to be displayed.
Role: The Grid Display setting parameter displays a grid on the active view.
Property GridPrimarySpacing() As
Returns or sets the Grid Primary Spacing setting parameter value.
Role: The Grid Primary Spacing setting parameter defines the horizontal spacing on the grid, expressed in millimiters. The default value is 100mm.
Property GridSecondaryStep() As
Returns or sets the Grid Secondary Step setting parameter value.
Role: The Grid Secondary Step setting parameter defines the grid's horizontal graduations. The default value is 10.
Property GridSnapPoint() As
Returns or sets the Grid Snap Point setting parameter value.
True if the Grid Snap Point setting parameter is checked and thus enables the annotation to be snapped to the nearest grid point. Otherwise, the gris is not used to anchor the annotation.
Property GridVPrimarySpacing() As
Returns or sets the GridV Primary Spacing setting parameter value.
Role: The GridV Primary Spacing setting parameter defines the vertical spacing on the grid, expressed in millimiters. The default value is 100mm. Set this value only if distorsions are allowed thanks to the property. Otherwise, the value sets to the Grid Primary Spacing setting parameter thanks to the for horizontal spacing is taken into account.
Property GridVSecondaryStep() As
Returns or sets the GridV Secondary Step setting parameter value.
Role: The GridV Secondary Step setting parameter defines the grid's vertical graduations. The default value is 10. Set this value only if distorsions are allowed thanks to the property. Otherwise, the value sets to the Grid Secondary Step setting parameter thanks to the for the number of horizontal graduations is taken into account.
Property LeaderAssociativity() As
Returns or sets the Leader Associativity setting parameter value.
Role: The Leader Associativity setting parameter defines the associativity of a leader with the pointed geometrical element.
Property ManRefSiz() As
Returns or sets the Manipulator Reference Size setting parameter value.
Role: The Manipulator Reference Size setting parameter defines the size of the manipulator attached to the end of an annotation leader. The default value is 2mm.
Property ManZooCap() As
Returns or sets the Manipulator Zoom Capability setting parameter value.
True if the Manipulator Zoom Capability setting parameter is checked and thus enables the annotation leader end manipulator to be zoomable. Otherwise, it is not zoomable.
Property MoveAfterCreation() As
Returns or sets the Move After Creation setting parameter value.
True if the Move After Creation setting parameter is checked and thus enables the annotation leader end manipulator to be moved, after the annotation creation, along lines or curves that represent the intersection between the geometry and the annotation's plane. Otherwise, the annotation leader end manipulator cannot be moved.
Property SaveInCGR() As
Returns or sets the Save In CGR setting parameter value.
True if the Save In CGR setting parameter is checked.
Role: When set to True, the FT&A 3D Annotation representations are saved in CGR. Otherwise, they are not saved.
Property Standard() As
Returns or sets the Tolerancing Standard setting parameter value.
Role: The Tolerancing Standard setting parameter defines the standard of the annotation's set.
Legal values: five conventional standards are available:
  • ASME: American Society for Mechanical Engineers
  • ASME_3D: American Society for Mechanical Engineers
  • ANSI: American National Standards Institute
  • JIS: Japanese Industrial Standard
  • ISO: International Organization for Standardization
Property UnderFeature() As
Returns or sets the Under Geometric Feature Nodes setting parameter value.
True if the Under Geometric Feature Nodes setting parameter is checked and thus enables 3D annotations to be displayed in the specification tree. This lets you view 3D annotations under the Part Design or Generative Shape Design feature nodes to which they are applied.
Property UnderSet() As
Returns or sets the Under Annotation Set Node setting parameter value.
True if the Under Annotation Set Node setting parameter is checked and thus enables 3D annotations to be displayed under the annotation set node in the specification tree. Set this parameter to True only if the Under View/Annotation Plane Nodes setting parameter managed by is set to True.
Property UnderView() As
Returns or sets the Under View/Annotation Plane Nodes setting parameter value.
True if the Under View/Annotation Plane Nodes setting parameter is checked and thus enables 3D annotations to be displayed under the view/annotation plane nodes in the specification tree. This lets you view 3D annotations under the view node to which they are linked.
Property ViewAssociativity() As
Returns or sets the View Associativity setting parameter value.
True if the View Associativity setting parameter is checked and thus enables the associativity of the view/annotation plane associativity with the pointed geometrical elements.
Role: The View Associativity setting parameter defines whether the views created are associative with the geometry. When views are associative to the geometry, any modification applied to the geometry or to the axis system is reflected in the view definition.
Property ViewProfile() As
Returns or sets the View Profile setting parameter value.
True if the View Profile setting parameter is checked and thus enables the view/annotation plane profile on the part/product to be displayed.
Property ViewReferential() As
Returns or sets the View Referential setting parameter value.
True if the View Referential setting parameter is checked and thus enables the display of the active annotation plane axis system.
Property ViewReferentialZoomable() As
Returns or sets the View Referential Zoomable setting parameter value.
True if the View Referential Zoomable setting parameter is checked and thus enables the annotation plane axis to be zoomable.

Methods


Func GetAllowDistortionsInfo( AdminLevel, oLocked) As
Retrieves information about the Allow Distorsions setting parameter value.
Refer to for a detailed description.
Func GetGridDisplayInfo( AdminLevel, oLocked) As
Retrieves information about the Grid Display setting parameter value.
Refer to for a detailed description.
Func GetGridPrimarySpacingInfo( AdminLevel, oLocked) As
Retrieves information about the Grid Primary Spacing setting parameter value.
Refer to for a detailed description.
Func GetGridSecondaryStepInfo( AdminLevel, oLocked) As
Retrieves information about the Grid Secondary Step setting parameter value.
Refer to for a detailed description.
Func GetGridSnapPointInfo( AdminLevel, oLocked) As
Retrieves information about the Grid Snap Point setting parameter value.
Refer to for a detailed description.
Func GetGridVPrimarySpacingInfo( AdminLevel, oLocked) As
Retrieves information about the GridV Primary Spacing setting parameter value.
Refer to for a detailed description.
Func GetGridVSecondaryStepInfo( AdminLevel, oLocked) As
Retrieves information about the GridV Secondary Step setting parameter value.
Refer to for a detailed description.
Func GetLeaderAssociativityInfo( AdminLevel, oLocked) As
Retrieves information about the Leader Associativity setting parameter value.
Refer to for a detailed description.
Func GetManRefSizInfo( AdminLevel, oLocked) As
Retrieves information about the Manipulator Reference Size setting parameter value.
Refer to for a detailed description.
Func GetManZooCapInfo( AdminLevel, oLocked) As
Retrieves information about the Manipulator Zoom Capability setting parameter value.
Refer to for a detailed description.
Func GetMoveAfterCreationInfo( AdminLevel, oLocked) As
Retrieves information about the Move After Creation setting parameter value.
Refer to for a detailed description.
Func GetSaveInCGRInfo( AdminLevel, oLocked) As
Retrieves information about the Save In CGR setting parameter value.
Refer to for a detailed description.
Func GetStandardInfo( AdminLevel, oLocked) As
Retrieves information about the Tolerancing Standard setting parameter value.
Refer to for a detailed description.
Func GetUnderFeatureInfo( AdminLevel, oLocked) As
Retrieves information about the Under Geometric Feature Nodes setting parameter value.
Refer to for a detailed description.
Func GetUnderSetInfo( AdminLevel, oLocked) As
Retrieves information about the Under Annotation Set Node setting parameter value.
Refer to for a detailed description.
Func GetUnderViewInfo( AdminLevel, oLocked) As
Retrieves information about the Under View/Annotation Plane Nodes setting parameter value.
Refer to for a detailed description.
Func GetViewAssociativityInfo( AdminLevel, oLocked) As
Retrieves information about the View Associativity setting parameter value.
Refer to for a detailed description.
Func GetViewProfileInfo( AdminLevel, oLocked) As
Retrieves information about the View Profile setting parameter value.
Refer to for a detailed description.
Func GetViewReferentialInfo( AdminLevel, oLocked) As
Retrieves information about the View Referential setting parameter value.
Refer to for a detailed description.
Func GetViewReferentialZoomableInfo( AdminLevel, oLocked) As
Retrieves information about the View Referential Zoomable setting parameter value.
Refer to for a detailed description.
Sub SetAllowDistortionsLock( iLocked)
Locks or unlocks the Allow Distorsions setting parameter value.
Refer to for a detailed description.
Sub SetGridDisplayLock( iLocked)
Locks or unlocks the Grid Display setting parameter value.
Refer to for a detailed description.
Sub SetGridPrimarySpacingLock( iLocked)
Locks or unlocks the Grid Primary Spacing setting parameter value.
Refer to for a detailed description.
Sub SetGridSecondaryStepLock( iLocked)
Locks or unlocks the Grid Secondary Step setting parameter value.
Refer to for a detailed description.
Sub SetGridSnapPointLock( iLocked)
Locks or unlocks the Grid Snap Point setting parameter value.
Refer to for a detailed description.
Sub SetGridVPrimarySpacingLock( iLocked)
Locks or unlocks the GridV Primary Spacing setting parameter value.
Refer to for a detailed description.
Sub SetGridVSecondaryStepLock( iLocked)
Locks or unlocks the GridV Secondary Step setting parameter value.
Refer to for a detailed description.
Sub SetLeaderAssociativityLock( iLocked)
Locks or unlocks the Leader Associativity setting parameter value.
Refer to for a detailed description.
Sub SetManRefSizLock( iLocked)
Locks or unlocks the Manipulator Reference Size setting parameter value.
Refer to for a detailed description.
Sub SetManZooCapLock( iLocked)
Locks or unlocks the Manipulator Zoom Capability setting parameter value.
Refer to for a detailed description.
Sub SetMoveAfterCreationLock( iLocked)
Locks or unlocks the Move After Creation setting parameter value.
Refer to for a detailed description.
Sub SetSaveInCGRLock( iLocked)
Locks or unlocks the Save In CGR setting parameter value.
Refer to for a detailed description.
Sub SetStandardLock( iLocked)
Locks or unlocks the Tolerancing Standard setting parameter value.
Refer to for a detailed description.
Sub SetUnderFeatureLock( iLocked)
Locks or unlocks the Under Geometric Feature Nodes setting parameter value.
Refer to for a detailed description.
Sub SetUnderSetLock( iLocked)
Locks or unlocks the Under Annotation Set Node setting parameter value.
Refer to for a detailed description.
Sub SetUnderViewLock( iLocked)
Locks or unlocks the Under View/Annotation Plane Nodes setting parameter value.
Refer to for a detailed description.
Sub SetViewAssociativityLock( iLocked)
Locks or unlocks the View Associativity setting parameter value.
Refer to for a detailed description.
Sub SetViewProfileLock( iLocked)
Locks or unlocks the View Profile setting parameter value.
Refer to for a detailed description.
Sub SetViewReferentialLock( iLocked)
Locks or unlocks the View Referential setting parameter value.
Refer to for a detailed description.
Sub SetViewReferentialZoomableLock( iLocked)
Locks or unlocks the View Referential Zoomable setting parameter value.
Refer to for a detailed description.