SfmStiffenerOnFreeEdge (Object)

Interface to manage different attributes of Stiffener on free edge.
Role: Provides access to Structural Functional Modeler's Stiffener on free edge.

Properties


Property FreeEdgeOffset() As
Returns or sets the SFE's Free Edge offset.
Parameters:
oOffset
[out] The retrieved Free Edge offset.
iOffset
[in] The input Free Edge offset.
Returns:
S_OK if everything ran ok.
Example
:
This example retrieves in Offset the Free Edge offset of the SfmStiffenerOnFreeEdge feature. 
 Dim Offset As Double
 Set Offset = SfmStiffenerOnFreeEdge.FreeEdgeOffset
Property SectionAngle() As
Returns or sets the SFE's section angle.
Parameters:
oAngle
[out] The retrieved angle of the section of SFE.
iAngle
[in] The retrieved angle of the section of SFE.
Returns:
S_OK if everything ran ok.
Example
:
This example retrieves in Angle the angle of the section of SfmStiffenerOnFreeEdge feature. 
 Dim Angle As Double
 Set Angle = SfmStiffenerOnFreeEdge.SectionAngle
Property SideOrientation() As
Returns or sets the side orientation.
Parameters:
oOrientation
[out] The retrieved Side Orientation of SFE.
iOrientation
[in] The input Side Orientation of SFE.
Returns:
S_OK if everything ran ok.
Example
:
This example retrieves side orientation of the Stiffener. 
 Dim Orient As Long
 Orient = SfmStiffenerOnFreeEdge.SideOrientation

Methods


Func GetFreeEdge() As
Returns the Free Edge.
Parameters:
oFreeEdge
[out] The retrieved Free Edge.
Returns:
S_OK if everything ran ok.
Example
:
This example retrieves in FreeEdge the Free Edge of the SfmStiffenerOnFreeEdge feature. 
 Dim FreeEdge As Reference
 Set FreeEdge = SfmStiffenerOnFreeEdge.GetFreeEdge
Func GetMoldedSurface() As
Returns the molded surface.
Parameters:
oMoldedSurface
[out] The retrieved Molded Surface.
Returns:
S_OK if everything ran ok.
Example
:
This example retrieves MoldedSurface the molded surface of the SfmStiffenerOnFreeEdge feature. 
 Dim MoldedSurface As Reference
 Set MoldedSurface = SfmStiffenerOnFreeEdge.GetMoldedSurface
Func GetWelds( iOperatingEle) As
Gets Welds feature on operated SFE.
Parameters:
iOperatingEle
[in] Operating element of the weld features.
oWelds
[out] The retrieved Weld features.
Returns:
S_OK if everything ran ok.
Example
:
This example gets welds features of Split SFE. 
 Dim Welds As SfmWelds
 Set Welds = SplitSFE.GetWelds(Nothing)
Sub SetFreeEdge( iFreeEdge)
Sets the Free Edge.
Parameters:
iFreeEdge
[in] The input Free Edge.
Returns:
S_OK if everything ran ok.
Example
:
This example sets FreeEdge the Free Edge of the SfmStiffenerOnFreeEdge feature. 
 Dim FreeEdge As Reference
 Set FreeEdge = SfmStiffenerOnFreeEdge.SetFreeEdge