IDL API Master Index

T

TCPTrace object: Interface representing a TCP trace.
TCPTraceActivity object: Interface representing TCPTraceActivity.
TCPTraceManager object: Interface representing an accessor to TCP traces object from a product.
TCPTraceManagerGraphics object: Interface used to modify the default graphical properties of TCP traces.
TCPTraceMode property in object TCPTraceManager: Indicates if the tracing capability is activ or not.
THEM property in object GeneralStatisticsSettingAtt: Returns or sets the state ot the thematic field.
THERM_COND property in object PCBComponent: Allow to get and set the thermal conductivity of a component.
THETA_JB property in object PCBComponent: Allow to get and set the junction to board thermal resistance of a component.
THETA_JC property in object PCBComponent: Allow to get and set the junction to case thermal resistance of a component.
TIME property in object GeneralStatisticsSettingAtt: Returns or sets the state ot the time and date field.
TOLERANCE property in object PCBComponent: Allow to get and set the TOLERANCE of a component.
TPSParallelOnScreen object: Interface for Parallel On Screen.
TPSParallelOnScreen method in object Noa: Gets the annotation on TPSParallelOnScreen interface.
TPSParallelOnScreen method in object Weld: Gets the annotation on TPSParallelOnScreen interface.
TPSParallelOnScreen method in object Text: Gets the annotation on TPSParallelOnScreen interface.
TPSParallelOnScreen method in object Capture: Gets the annotation on TPSParallelOnScreen interface.
TPSParallelOnScreen method in object FlagNote: Gets the annotation on TPSParallelOnScreen interface.
TPSParallelOnScreen method in object Roughness: Gets the annotation on TPSParallelOnScreen interface.
TPSParallelOnScreen method in object SemanticGDT: Role: Gets the annotation on TPSParallelOnScreen interface.
TPSParallelOnScreen method in object NonSemanticGDT: Gets the annotation on TPSParallelOnScreen interface.
TPSStatus property in object Annotation: Get the TPS Status.
TPSStatus property in object Annotation2: Gets the TPS Status.
TPSView object
TPSViewFactory object: Represents the TPS view factory object.
TPSViewFactory property in object AnnotationSet: Gets the factory to create TPS Views.
TPSViews object: Interface for collection of TPS Views CATIATPSView.
TPSViews property in object Capture: Retrieves the TPS Views that are visualy managed by this Capture.
TPSViews property in object AnnotationSet: Retrieves all the TPSViews that belong to the set.
Tables property in object DrawingView: Returns the drawing table collection of the drawing view.
Tables property in object Layout2DView: Returns the drawing table collection of the drawing view.
TabularAmplitude property in object ABQLoad: Sets or returns the amplitude, given the Tabular amplitude refrence.
TabularAmplitude property in object ABQBoundaryCondition: Sets or returns the amplitude, given the Tabular amplitude reference.
TabulatedLimit property in object DimensionLimit: Returns or sets the dimension tabulated limit.
Tag object: Interface representing a Tag.
TagFactory object: Interface representing Tag factory.
TagGroup object: Interface representing a TagGroup.
TagGroupFactory object: Interface representing TagGroup factory.
TailSymbol property in object DrawingArrow: Returns or sets symbol type of tail side.
TailTarget property in object DrawingArrow: Returns or sets target element of tail side.
TangencyAngle property in object HybridShapeHealing: Returns the Tangency Angle of the healing.
TangencyObjective property in object HybridShapeHealing: Returns the Tangency Objective of the healing.
TangencyThreshold property in object HybridShapeCurveSmooth: Returns the TangencyThreshold.
TangentCurve property in object HybridShapeCircleCenterTangent: Returns or sets the tangent curve to which the circle will be tangent.
TangentIntPoint property in object HybridShapeConic: Returns or sets the conic tangent intersection point.
TangentOrientation1 property in object HybridShapeCircleTritangent: Returns or sets the tangent orientation of the circle first reference element.
TangentOrientation1 property in object HybridShapeCircleCenterTangent: Returns or sets the tangent orientation of the circle first reference element.
TangentOrientation1 property in object HybridShapeCircleBitangentPoint: Returns or sets the tangent orientation of the circle first reference element.
TangentOrientation1 property in object HybridShapeCircleBitangentRadius: Returns or sets the tangent orientation of the circle first reference element.
TangentOrientation2 property in object HybridShapeCircleTritangent: Returns or sets the tangent orientation of the circle second reference element.
TangentOrientation2 property in object HybridShapeCircleCenterTangent: Returns or sets the tangent orientation of the circle second reference element.
TangentOrientation2 property in object HybridShapeCircleBitangentPoint: Returns or sets the tangent orientation of the circle second reference element.
TangentOrientation2 property in object HybridShapeCircleBitangentRadius: Returns or sets the tangent orientation of the circle second reference element.
TangentOrientation3 property in object HybridShapeCircleTritangent: Returns or sets the tangent orientation of the circle third reference element.
TangentPlane object: Interface for accessing Tangent Plane modifier on a TPS.
TangentPlane method in object Annotation: Get the annotation on the TangentPlane interface.
TangentPlane method in object SemanticGDT: Role: Returns the Tangent Plane interface.
TaperAngle property in object HybridShapeHelix: Reads the helix taper angle.
TaperOutward property in object HybridShapeHelix: Reads / Modifies the taper angle sense of variation.
TargetAxis property in object HybridShapeAxisToAxis: Returns or sets the target axis.
TargetDirection property in object HybridShapeUnfold: Role: Retrieves target direction on the object.
TargetMethod property in object ABQMassScaling: Sets or returns the target time scaling method.
TargetOperation property in object ManufacturingPrecedence: Returns the target object of the precedence, but with the Operation interface if it is.
TargetOrientationMode property in object HybridShapeUnfold: Returns or sets the mode for target surface orientation.
TargetOrigin property in object HybridShapeUnfold: Role: Retrieves target origin on the object.
TargetPlane property in object HybridShapeUnfold: Returns or sets the target plane.
TargetSurface property in object HybridShapeWrapSurface: Returns or sets the target surface of the WrapSurface.
TargetTime property in object ABQMassScaling: Sets or returns the scaling target time.
TargetTimeOn property in object ABQMassScaling: Sets or returns whether the target time scaling is active.
TargetType property in object MoveActionActivity
TargetValue property in object Optimization: Returns the objective parameter target value.
Targets property in object DatumSimple: Retrieves a CATITPSList to read the list of datum target.
Task object: Represents the Task of a resource.
TaskList property in object HumanProgram
TechnicalDocumentationPath property in object DocumentationSettingAtt: Returns the technical documentation location (path) parameter.
TempOutputDirectory property in object AnalysisReportingSettingAtt: Returns or sets the TempOutputDirectory parameter.
TemplateName property in object CD5Template: Returns (gets) the name of the Template.
TemplateType property in object CD5Template: Returns (gets) the type of the Template.
TemplateTypeName property in object CD5TemplateType: Returns (gets) the name of the Template Type.
TemplateTypes property in object CD5EngineV6R2015: Returns (gets) the list of all "Template Types".
Templates property in object CD5TemplateType: Returns (gets) the list of Templates from a Template type.
TemporaryDirectory property in object FileSystem: Returns the temporary system directory.
TerminationAttrList property in object PlugMapViewSettingAtt: Returns or sets the ConstraintsSimul parameter.
TerminationIDNumber property in object EHMInsertionActPlugMapViewData: Gets Termination ID Number.
TerminationName property in object EHMInsertionActPlugMapViewData: Gets Termination Name.
TerminationNumber property in object EHMInsertionActPlugMapViewData: Gets Termination Number.
TerminationRefDesignator property in object EHMInsertionActPlugMapViewData: Gets Termination Reference Designator.
TerminationSubType property in object EHMInsertionActPlugMapViewData: Gets Termination Sub Type.
TerminationType property in object EHMInsertionActPlugMapViewData: Gets Termination Type.
TestInput method in object Behavior: Tests if the behavior's input is set or not.
TestInternal method in object BehaviorVBScript: Test for one available output of the behavior.
TestOutput method in object Behavior: Tests if the behavior's output is set or not.
Text object: Interface for the TPS Text object.
Text property in object Noa: Retrieves or sets Text Representation.
Text property in object Text: Gets the annotation's text.
Text property in object FlagNote: Retrieves or sets Flag Text Representation.
Text method in object Annotation: Get the annotation on the Text interface.
Text method in object Annotation2: Gets the annotation on the Text interface.
Text property in object Marker2D: Returns or sets the text for a text Marker2D.
Text property in object Marker3D: Returns or sets the text for a text marker 3D.
Text property in object DrawingText: Returns or sets character string that makes up the text.
Text property in object DrawingTextRange: Returns or sets the character string making up the drawing text range.
TextActivity property in object WorkGeneralSettingAtt: Returns or sets the TextActivity parameter.
TextAngle property in object Marker2D: Returns or sets the text's angle for a text Marker2D.
TextBlanking property in object PageSetup: Returns or sets the text blanking option in print Text will be printed in blanking rectangle Default value is FALSE <! @sample > <dl> <dt>Example: <dd> This example sets the text blanking option for the <tt>SetupForMyPrint</tt> page setup.
TextFont property in object Marker2D: Returns or sets the text's font for a text Marker2D.
TextFont property in object Marker3D: Returns or sets the text's font for a marker 3D.
TextMigration property in object V4V5SpaceSettingAtt: Returns or sets the activation state of mode for 3D Text migration Role: Returns or sets the state of mode for 3D Text migration.
TextOrientation property in object Marker2D: Return or set the orientation of text.
TextOrientation property in object Marker3D: Returns or sets the orientation of text.
TextProperties property in object DrawingGDT: Returns the text properties of the drawing GDT.
TextProperties property in object DrawingText: Returns the text properties of the drawing text.
TextProperties property in object DrawingTable: Returns the text properties of the drawing table.
TextProperties property in object DrawingWelding: Returns the text properties of the drawing welding.
TextProperties property in object DrawingCoordDim: Returns the text properties of the drawing coordinate dimension.
TextProperties property in object DrawingTextRange
TextScaling property in object PageSetup: Returns or sets text scaling option for print.
TextSize property in object Marker2D: Returns or sets the text's size for a text Marker2D.
TextSize property in object Marker3D: Returns or sets the text's size for a marker 3D.
TextStream object: The textstream object allows to manage input and output for a text stream.
TextVisualization property in object ExpertRuleBaseRuntime: Returns or sets the Report option for visualization.
Texts property in object DrawingView: Returns the drawing text collection of the drawing view.
Texts property in object Layout2DView: Returns the drawing text collection of the Layout2D view.
Texture property in object RenderingEnvironmentWall: Returns or sets the wall texture name.
TextureAmplitude property in object RenderingMaterial: Returns or sets the 3d texture amplitude coefficient.
TextureComplexity property in object RenderingMaterial: Returns or sets the 3d texture complexity.
TextureGain property in object RenderingMaterial: Returns or sets the 3d texture gain coefficient.
TextureImage property in object RenderingMaterial: Returns or sets the texture image pathname of a material.
TexturePerturbation property in object RenderingMaterial: Returns or sets the 3d texture perturbation coefficient.
TextureTurbulence property in object RenderingMaterial: Returns or sets the 3d texture turbulence status.
TextureType property in object RenderingMaterial: Returns or sets the texture type of a material.
TextureVeinAmplitude property in object RenderingMaterial: Returns or sets the 3d texture vein amplitude coefficient.
TexturesStatus property in object RenderingShooting: Returns or sets the textures status of shooting.
ThickSurface object: Represents the ThickSurface feature.
Thickness object: Represents the thickness shape.
Thickness property in object Stiffener: Returns the stiffener thickness.
Thickness property in object HybridShape: Returns the thickness of the hybrid shape.
Thickness property in object StrObjectExt: Returns the Thickness of the SR1 object.
Thickness property in object DrawingDimLine: Returns or sets thickness of dimension line.
Thickness property in object Section: Returns or sets the thickness of the section.
Thickness property in object DrawingDimExtLine: Returns or sets thickness of extension line.
Thickness property in object SfmObjectExt: Returns the Thickness of the structural object.
Thickness property in object SfmSuperPlate: Returns or sets the SuperPlate's Thickness.
Thickness1 property in object HybridShapeThickness: Returns or sets the first thickness value in mm.
Thickness1Value property in object HybridShapeThickness: Returns the first thickness value.
Thickness2 property in object HybridShapeThickness: Returns or sets the second thickness value in mm.
Thickness2Value property in object HybridShapeThickness: Returns the second thickness value.
ThicknessFromTop property in object Stiffener: Returns the stiffener thickness top in case of From Top stiffener.
ThicknessListPath property in object PathESSRessourcesSettingAtt: Returns or sets the ThicknessListPath parameter.
ThicknessShapeName method in object DMOThicknesses: Returns the name of the associated shape.
Thicknesses property in object OptimizerWorkBench: Returns Thicknesses.
Third property in object HybridShapePlane3Points: Returns or sets the third point.
ThirdGuideCrv property in object HybridShapeSweepConic: Returns or sets the third guide curve.
ThirdGuideCrv property in object HybridShapeSweepCircle: Returns or sets the sweep operation third guide curve.
ThirdPoint property in object HybridShapeRotate: Returns or sets the third point defining the rotation.
Thread object: Represents the Thread feature.
ThreadDepth property in object Hole: Returns the hole thread depth.
ThreadDescription property in object Thread: Returns the thread/tap description parameter.
ThreadDiameter property in object Hole: Returns the hole thread diameter.
ThreadPitch property in object Hole: Returns the hole thread pitch.
ThreadSide property in object Hole: Returns the hole thread side.
ThreadingMode property in object Hole: Returns the hole threading mode.
Threads property in object DrawingView: Returns the drawing thread collection of the drawing view.
Threads property in object Layout2DView: Returns the drawing thread collection of the Layout2D view.
ThreeDCutShapeName method in object ThreeDCuts: Returns the name of the associated shape.
ThreeDCuts object
Threshold property in object HybridShapeMidSurface: Returns or sets Threshold Thickness.
TildeDisplay property in object MeasureSettingAtt: Returns or sets the TildeDisplay parameter.
TileLayoutWindow property in object Layout2DSettingAtt: Returns the tile of Layout window parameter.
Time property in object Sampled: Retrieves/sets the sampled's time.
TimeAmplitudeTableSize property in object ABQTabularAmplitude: Returns the size of the time/amplitude table.
TimeAmplitudeTableSize property in object ABQSmoothStepAmplitude: Returns the size of the time/amplitude table.
TimeIncrementationMethod property in object ABQHeatTransferStep: ets or returns the incrementation type.
TimeIncrementationMethod property in object ABQGeneralStaticStep: Returns or sets the type of the incrementation during the step.
TimeIncrementationMethod property in object ABQExplicitDynamicsStep: Sets or returns the type of the incrementation during the step.
TimePeriod property in object ABQHeatTransferStep: Sets or returns the step time.
TimePeriod property in object ABQGeneralStaticStep: Returns or sets the total time period of the Abaqus general static step.
TimePeriod property in object ABQExplicitDynamicsStep: Sets or returns the total time period of the Abaqus explicit dynamics step.
TimeRoll property in object GeneralSessionSettingAtt: Returns the data save parameter (in milliseconds).
TimeScalingFactor property in object ABQExplicitDynamicsStep: Sets or returns the time scaling factor.
TimeSpan property in object ABQTabularAmplitude: Sets or returns the timespan in tabular amplitude.
TimeSpan property in object ABQSmoothStepAmplitude: Sets or returns the timespan in smooth step amplitude.
TimeSpan_Type enum: Time span types.
TimeUnit property in object GeneralStatisticsSettingAtt: Returns or sets the state ot the time unit field.
TimestampMode property in object CacheSettingAtt: Retrieves or sets the timestamp control.
TimingFlag property in object ABQFHOutputRequest: Returns or sets a flag for output at approximate or exact times.
To property in object HybridShapeBoundary: Removes or sets the starting limit(i.
To property in object FunctionalAction: Get the To object.
ToOrientation property in object HybridShapeBoundary: Gets or sets the Starting Limit Orientation (i.
TolJoin property in object IgesSettingAtt: Returns or sets the join tolerance setting parameter value.
TolOptInvalidGeom property in object IgesSettingAtt: Returns or sets the InvalidGeom Tolerance setting parameter value.
Tolerance property in object IgesSettingAtt: Returns or sets the tolerance ( optimize - fitting ) setting parameter value.
TolerancePerUnitBasisRestrictiveValue object: Interface for accessing tolerance per unit basis restrictive value on a TPS.
TolerancePerUnitBasisRestrictiveValue method in object Annotation: Get the annotation on the TolerancePerUnitBasisRestrictiveValue interface.
TolerancePerUnitBasisRestrictiveValue method in object SemanticGDT: Role: Returns the TolerancePerUnitBasisRestrictiveValue interface.
ToleranceSheetSettingAtt object: The interface to access a CATIAToleranceSheetSettingAtt.
ToleranceUnitBasisValue object: Interface for accessing values of the tolerance unit basis on a TPS.
ToleranceUnitBasisValue method in object Annotation: Get the annotation on the ToleranceUnitBasisValue interface.
ToleranceUnitBasisValue method in object SemanticGDT: Role: Returns the ToleranceUnitBasisValue interface.
ToleranceZone object: Interface for accessing tolerance zone informations of a TPS.
ToleranceZone method in object Annotation: Get the annotation on the ToleranceZone interface.
ToleranceZone method in object SemanticGDT: Role: Returns the ToleranceZone interface.
TolerantMode property in object HybridShapeFill
Tool property in object MountActivity: This property returns and sets the tool to mount.
Tool property in object UnmountActivity: This property returns and sets the tool to Unmount.
Tool property in object ManufacturingActivity: Retreive the Tool of a Manufacturing Activity.
Tool property in object ManufacturingToolAssembly: Returns the tool of an assembly.
Tool property in object ManufacturingToolAssembly2: Set the tool of an assembly.
ToolAssembly property in object ManufacturingActivity: Retreive the ToolAssembly of a Manufacturing Activity.
ToolAxisStrategy property in object ManufacturingPattern: Returns or sets the Tool Axis Strategy of a Manufacturing Pattern.
ToolNumber property in object ManufacturingTool: Give the Number linked to a Manufacturing Tool.
ToolNumber property in object ManufacturingToolAssembly: Returns the number linked to a tool assembly.
ToolProfile property in object MountActivity
ToolProfile property in object UnmountActivity
ToolTipMode property in object DevAnalysisSettingAtt: Returns or sets the ToolTipMode parameter.
ToolType property in object ManufacturingTool: Return the technological type of a the tool.
Top property in object Window: Returns or sets the distance of the window with respect to the inner top side of the frame.
Top property in object Application: Returns or sets the distance from the application'si frame window top to the top of the screen.
TopMargin property in object PageSetup: Returns or sets the top margin.
TopOffset property in object ThickSurface: Returns the value of the top offset.
TopType property in object ManufacturingPrismaticMachiningArea: Returns or sets the Hardness Mode on top of a Manufacturing Prismatic Machining Area.
TopZ property in object StrObjectExt: Returns the TopZ of the SR1 object.
TopZ property in object SfmObjectExt: Returns the TopZ of the structural object.
TopologySimplificationActivity property in object HybridShapeCurveSmooth: Returns or sets the TopologySimplificationActivity.
TotalPoints property in object TCPTrace: Returns the number of points in the trace.
TotalTime property in object ManufacturingActivity: Retreive the total Time of a Manufacturing Activity.
TraceAxisColor property in object SimTraceSettingAtt: Returns or sets the TraceAxisColor parameter.
TraceAxisThick property in object SimTraceSettingAtt: Returns or sets the TraceAxisThick parameter.
TraceAxisType property in object SimTraceSettingAtt: Returns or sets the TraceAxisType parameter.
TraceAxisVisu property in object SimTraceSettingAtt: Returns or sets the TraceAxisVisu parameter.
TraceDeletePath property in object SimTraceSettingAtt: Returns or sets the TraceDeletePath parameter.
TraceLegend property in object SimTraceSettingAtt: Returns or sets the TraceLegend parameter.
TraceLineColor property in object SimTraceSettingAtt: Returns or sets the TraceLineColor parameter.
TraceLineThick property in object SimTraceSettingAtt: Returns or sets the TraceLineThick parameter.
TraceLineType property in object SimTraceSettingAtt: Returns or sets the TraceLineType parameter.
TraceLineVisu property in object SimTraceSettingAtt: Returns or sets the TraceLineVisu parameter.
TraceName property in object TCPTrace: Manage the name of the trace.
TracePointColor property in object SimTraceSettingAtt: Returns or sets the TracePointColor parameter.
TracePointSymbol property in object SimTraceSettingAtt: Returns or sets the TracePointSymbol parameter.
TracePointVisu property in object SimTraceSettingAtt: Returns or sets the TracePointVisu parameter.
Track object: The interface to access a CATIATrack.
TrackAutoUpdate property in object FittingSettingAtt
Tracks object: A collection of all the track objects contained in the current document.
TransferWithTarget property in object SWKIKConstraint: Returns or sets the Transfer With Target property.
TransfertToView method in object Annotation: Move the annotation in another view.
TransfertToView method in object Annotation2: Moves the annotation in another view.
Transform method in object SchMovable: Transform a schematic object with a transformation matrix.
Transform method in object AnnotationSetTransformIntoAssemblySet: Transforms annotation set into an assembly annotation set.
TransformationShape object: Represents the shapes based on a transformation of another shape.
Translate object: Represents the hybrid shape translate feature object.
Translate method in object Viewer3D: Applies a translation.
Translate method in object ARCTag: Function to translate the ARC tag along a given direction vector.
Translate method in object SchMovable: Translate a schematic object with a vector.
TranslateAlongSeam method in object ARCTag: Function to translate the ARC tag along the seam.
TranslateTag method in object ARCTagGroup: Function to translate the ARC tag with the given index along the given direction vector.
TranslateTagAlongSeam method in object ARCTagGroup: Function to translate the ARC tag with the given index along the seam.
TranslationU property in object RenderingEnvironmentWall: Returns or sets the texture offset along the U axis.
TranslationV property in object RenderingEnvironmentWall: Returns or sets the texture offset along the V axis.
TranslatorMode property in object MultiCADSettingAtt
TransparencyCoefficient property in object RenderingMaterial: Returns or sets the transparency coefficient of a material.
TransparencyMode property in object VisualizationSettingAtt: Returns the TransparencyMode parameter.
TravelColor property in object DevAnalysisSettingAtt: Returns or sets the TravelColor parameter.
TravelLimit property in object DevAnalysisSettingAtt: Returns or sets the TravelLimit parameter.
TreeTabSettingAtt object
TreeVizManipSettingAtt object: The Interface to retrieve and set the visual information on the specification tree.
TriDimFeatEdge object: 1-D boundary belonging to a feature whose topological result is three dimensional.
TriDimFeatVertexOrBiDimFeatVertex object: 0-D boundary belonging to a feature whose topological result is three dimensional or two dimentional.
Trim object: Represents the Trim, or union trim boolean operation.
Trim property in object HybridShapeCorner: Returns or sets whether the corner reference curves are or should be trimmed.
Trim property in object HybridShapeConnect: Gets or Sets the trim mode.
TrimMode property in object HybridShapeCorner: Returns or sets whether the corner reference curves are or should be trimmed.
TrimMode property in object HybridShapeCircleTritangent: Returns or sets whether the circle reference curves are or should be trimmed.
TrimMode property in object HybridShapeCircleBitangentPoint: Returns or sets whether the circle reference curves are or should be trimmed.
TrimMode property in object HybridShapeCircleBitangentRadius: Returns or sets whether the circle reference curves are or should be trimmed.
TrimOption property in object HybridShapeSweepLine: Returns or sets the trim option.
TrimOption property in object HybridShapeSweepCircle: Returns or sets the trim option status.
TritangentFillet object: The Tritangent Fillet feature : a fillet is built between 3 faces, 2 faces will be relimited, the third one ("face to remove") will be used for fillet tangency ; this face will disappear within the resulting shape.
TrueColorMode property in object PartInfrastructureSettingAtt: Returns or sets the "ColorInheritanceMode" parameter.
TrueDimMode property in object DrawingDimension: Returns or sets true dimension mode or not.
TrueDimension property in object FTASettingAtt: Returns the TrueDimension parameter.
TrunkSideBending property in object SWKErgoRULA: This property is True if the trunk of the manikin is bent, given the manikin's current posture.
TrunkTwisted property in object SWKErgoRULA: This property is True if the trunk of the manikin is twisted, given the manikin's current posture.
TwoSideLightingMode property in object VisualizationSettingAtt: Returns the TwoSideLightingMode parameter.
Type property in object File: Returns the type of the file.
Type property in object Camera: Returns the camera's type.
Type property in object Hole: Returns the hole type.
Type property in object ABQJob: Returns or sets the job type.
Type property in object Activity: This method returns the type of the current activity.
Type property in object ABQLoad: Returns the type of the load.
Type property in object ABQStep: Returns the type of the step.
Type property in object ProductScene: Returns the type of the Product-Scene.
Type property in object Annotation: Get the Type.
Type property in object AxisSystem: Returns or sets the type of the axis system.
Type property in object CD5SaveItem: Returns (gets) or sets the Type of the item.
Type property in object Constraint: Returns the constraint type.
Type property in object Annotation2: Gets the Type.
Type property in object ABQProperty: Returns the type of the property.
Type property in object SelectedElement: Returns the string constant which describes the selected element Automation type.
Type property in object HybridShapeSpiral: Reads / Changes the spiral type.
Type property in object Marker2D: Returns the type of the marker 2D.
Type property in object Marker3D: Returns the type of the marker 3D.
Type property in object Joint: Returns the joint type.
Type property in object StrObject: Returns the type of the structure object.
Type property in object RenderingLight: Returns or sets the light type.
Type property in object ABQInteraction: Returns the type of the Interaction.
Type property in object ABQTemperature: Returns the type of the Temperature.
Type property in object StrCutback: Returns the type of the cutback object.
Type property in object DrawingThread: Returns or sets a CatThreadType (threaded or taped) on a thread.
Type property in object HybridShapeDirection: Returns the direction type.
Type property in object ABQOutputRequest: Returns the type of the output request.
Type property in object AnalysisSet: Returns the type of the analysis Set.
Type property in object AssemblyHole: Returns or sets the hole type.
Type property in object Section: Returns or sets the type of the section.
Type property in object Conflict: Returns the type of the conflict.
Type property in object ElecSchematicObject: Returns the Electrical Schematic Object's Type (Alternator, Signal, Bundle, Wire, .
Type property in object HybridShapePointOnCurve: Returns the distance stored value type.
Type property in object BasicComponent: Returns the type of the Basic Component.
Type property in object AnalysisEntity: Returns the type of the analysis entity.
Type property in object TreeVizManipSettingAtt: Retrieves or Sets the type applied to the specification tree.
Type property in object MechanismCommand: Returns the command type.
Type property in object ABQBoundaryCondition: Returns the type of the boundary condition.
Type property in object StrNibblingFeature: Returns or Sets Nibbling Type on Current Nibbling.
Type property in object SWKVision: Returns or sets the vision type.
Type property in object AnalysisLocalEntity: Returns the type of the analysis Entity.
Type property in object SemanticGDTFrameExtension: Gets the Type.
Type property in object ArrangementProduct: Returns the Type of the ArrangementProduct in the form of a String.
Type property in object AnalysisMeshLocalSpecification: Returns the type of the local specification.
Type property in object ManufacturingPrismaticMachiningArea: Returns or sets the Type of a Manufacturing Prismatic Machining Area.
TypeBaseFrm property in object ImportD5SettingAtt: Returns or sets the TypeBaseFrm parameter.
TypeCoorsys property in object ImportD5SettingAtt: Returns or sets the TypeCoorsys parameter.
TypeESSObjectSettingAtt object: The interface to access a CATIATypeESSObjectSettingAtt.
TypeOfIconOnFunctionalElement property in object FunctionalSystemSettingAtt: Returns or sets the TypeOfIconOnFunctionalElement parameter.
TypeOfTransfer property in object HybridShapeTransfer: Returns or sets the type of transfer.
TypeSolution property in object HybridShapeReflectLine: Returns or sets whether the reflectline curve is or should be created with the normal to the support or the tangent plane to the support.
TypeSpecifier property in object NonSemanticDatumTarget: Retrieves or sets the type of specifier.
TypeToolFrm property in object ImportD5SettingAtt: Returns or sets the TypeToolFrm parameter.
TypeWclPath property in object ImportD5SettingAtt: Returns or sets the TypeWclPath parameter.
temperatureDependency property in object ABQFilmCondition: Sets or returns the temperature dependency.
temperatureDependency property in object ABQThermalConnBehavior: Sets or returns the temperature dependency.