IDL API Master Index

I

IDispatch object: Base interface for all Automation interfaces.
IKManager property in object SWKManikin: Returns the inverse kinematics (IK) engine of the current manikin.
IPDTemplateProperty object: Interface to access template object (being pointed by the given V5 object) properties.
IUnknown object: Base interface for all interfaces.
IconName property in object ArrNomenclature: Gets/Sets the Icon Name associated to the Type Name.
IdentificationLineSide property in object DrawingWelding: Returns or sets the welding identification line Side of the drawing welding symbol.
Identifier property in object PCBArea
Identifier property in object SWKIKConstraint: Returns the identifier(ID) of the constraint.
Ig2SettingAtt object: Interface dedicated to modify or read the current settings corresponding to the IG2 Data Exchange Ensure consistency with the C++ interface to which the work is delegated.
IgesSettingAtt object: Represents the CATIA IGES setting controller object.
IgpOlpSettingAtt object: Represents the Offline Programming setting controller object.
IlluminationStatus property in object RenderingLight: Changes the indirect illumination status.
ImageHeight property in object RenderingShooting: Returns or sets the image height for shooting.
ImageOutputDirectory property in object RenderingShooting: Returns or sets the output directory for image.
ImageOutputFormat property in object RenderingShooting: Returns or sets the file type used for saved image.
ImageOutputName property in object RenderingShooting: Returns or sets the output name for image (extension excluded).
ImageOutputType property in object RenderingShooting: Returns or sets the image output location.
ImagePredefinedRatio property in object RenderingShooting: Returns or sets the image height for shooting.
ImageQualityMode property in object AnalysisReportingSettingAtt: Returns or sets the ImageQualityMode parameter.
ImageTextSize property in object AnalysisPostProSettingAtt: Returns or sets the ImageTextSize parameter.
ImageTextStacking property in object AnalysisPostProSettingAtt: Returns or sets the ImageTextStacking parameter.
ImageViewMode property in object DrawingViewGenerativeBehavior: Returns or sets the view generation mode as pixel image.
ImageWidth property in object RenderingShooting: Returns or sets the image width for shooting.
ImaginaryDataValues property in object ABQIAABQBaseMotionVB
ImaginaryDataValues property in object ABQIAABQFrequencyLoadingVB
ImaginaryRadius property in object Hyperbola2D
ImplicitLawInterpolationMode property in object HybridShapeIntegratedLaw: Gets or sets Interpolation mode for implicit law.
ImpliedResourceFilter property in object VerifTabSettingAtt
Import method in object AnalysisManager: Import an existing document in an analysis document .
Import method in object ExpertRuleBaseRuntime: Import from RuleSet.
ImportAnnotation property in object ImportD5SettingAtt: Returns or sets the ImportAnnotation parameter.
ImportBaseFrm property in object ImportD5SettingAtt: Returns or sets the ImportBaseFrm parameter.
ImportCATSetting method in object ManufacturingSetup: ImportCATSetting.
ImportCollision property in object ImportD5SettingAtt: Returns or sets the ImportCollision parameter.
ImportConfigFile property in object ImportD5SettingAtt: Returns or sets the ImportConfigFile parameter.
ImportCoorsys property in object ImportD5SettingAtt: Returns or sets the ImportCoorsys parameter.
ImportCreaseAngle property in object VrmlSettingAtt: Returns or sets the ImportCreaseAngle parameter.
ImportD5SettingAtt object: Interface to handle parameters of General-Compatibility-DELMIA D5 Tools Options Tab page.
ImportDefineFile method in object AnalysisManager: Import an existing document in an analysis document.
ImportDestinationView property in object Ig2SettingAtt: Get the destination view.
ImportDftStandard property in object Ig2SettingAtt: Get the name of the Drafting standard, which define the standard of the resulting CATDrawing file.
ImportDftStandard property in object DxfSettingAtt: Get the name of the Drafting standard, which define the standard of the resulting CATDrawing file.
ImportDimensions property in object Ig2SettingAtt: Get the Import dimensions option value.
ImportDimensions property in object DxfSettingAtt: Get the Import dimensions option value.
ImportDisp method in object AnalysisImport: Import displacements from a CATAnalysisExport file.
ImportDxfStandard property in object DxfSettingAtt: Get the name of the Dxf standard, which define the different mapping used at import.
ImportEdge property in object ImportD5SettingAtt: Returns or sets the ImportEdge parameter.
ImportEndPoints property in object Ig2SettingAtt: Get the Create End Points option value.
ImportEndPoints property in object DxfSettingAtt: Get the Create End Points option value.
ImportFile method in object AnalysisManager: Import an existing document in an analysis document.
ImportFloor property in object ImportD5SettingAtt: Returns or sets the ImportFloor parameter.
ImportForce method in object AnalysisImport: Import loads from a CATAnalysisExport file.
ImportFrom method in object DMUReviews
ImportFromFile method in object ExpertRuleBaseRuntime: Import from file.
ImportGroupAsSelSet property in object IgesSettingAtt: Returns or sets the Import Selection Set mode setting parameter value.
ImportKeepModelSpace property in object DxfSettingAtt: Get the value of the Keep Model Space option.
ImportLibrary property in object ImportD5SettingAtt: Returns or sets the ImportLibrary parameter.
ImportMapLayerOn2DL property in object DxfSettingAtt: Get the value of Map Layer On 2DL sheet option.
ImportNCOutput method in object ManufacturingOperation: Import an NC File.
ImportNCOutputOnProgram method in object ManufacturingProgram: Import an NC File on a program.
ImportPDBCache property in object ImportD5SettingAtt: Returns or sets the ImportPDBCache parameter.
ImportPaperSpacesInBackground property in object DxfSettingAtt: Get the value of the Paper Spaces in Background option.
ImportRecording property in object ImportD5SettingAtt: Returns or sets the ImportRecording parameter.
ImportScaleDenominator property in object DxfSettingAtt: Get the denominator value of the scale factor.
ImportScaleNumerator property in object DxfSettingAtt: Get the numerator value of the scale factor.
ImportToolFrm property in object ImportD5SettingAtt: Returns or sets the ImportToolFrm parameter.
ImportUnit property in object VrmlSettingAtt: Returns or sets the ImportUnit parameter (unit of imported Vrml files).
ImportUnit property in object Ig2SettingAtt: Get the import unit.
ImportUnit property in object DxfSettingAtt: Get the import unit.
ImportUserAttr property in object ImportD5SettingAtt: Returns or sets the ImportUserAttr parameter.
ImportUserViews property in object ImportD5SettingAtt: Returns or sets the ImportUserViews parameter.
ImportWclMessage property in object ImportD5SettingAtt: Returns or sets the ImportWclMessage parameter.
ImportWclPath property in object ImportD5SettingAtt: Returns or sets the ImportWclPath parameter.
ImportWithLink method in object ExpertRuleBaseRuntime: Import with link to a document.
ImposedMaxValue property in object AnalysisColorMap
ImposedMinValue property in object AnalysisColorMap
ImposedVertexRadius method in object VarRadEdgeFillet: Returns the fillet radius on an imposed vertex.
ImposedVertices property in object VarRadEdgeFillet: Returns the collection of vertices where a radius has been imposed.
InBooleanOperation property in object Body: Returns True if the body is involved in a boolean operation, else returns False.
InProcessModelBodiesCount method in object ManufacturingSetup: Returns the number of In Process Model Bodies from a Manufacturing Setup.
InWorkObject property in object Part: Returns or sets the in work object of the part.
Inactivate method in object Part: Suppresses an object from being updated.
InactivityDuration property in object DisconnectionSettingAtt: Returns or sets the inactivity duration.
Include method in object CD5Structure: Includes an sub component (identified by its ENOVIA V6 Identifier) for a future Partial Open operation.
IncludeAllChildren property in object CD5Engine: Returns (gets) or sets the value of the Open option "Open With".
IncludeShellThickness property in object ABQFastenedPair: Sets or returns the include shell element thickness flag.
IncludeShellThickness property in object ABQFastenedConnectionEnhancement: Sets or returns the include shell element thickness flag.
Included property in object CD5SaveItem: Returns (gets) or sets whether item should be included in the Save Operation.
IncrementTabulation method in object ManufacturingOutput: Increment the tabulation of the current block of text by the specified number of characters.
Incrementation_Type enum: Step incrementation methods.
Indicate2D method in object Document: Runs an 2D interactive indication command.
Indicate3D method in object Document: Runs an 3D interactive indication command.
IndicateOrSelectElement2D method in object Selection: Runs an interactive command enabling both indication and selection, 2D version.
IndicateOrSelectElement3D method in object Selection: Runs an interactive command enabling both indication and selection, 3D version.
Inertia object: Represents the Inertia object.
Inertias object: A collection of all inertia objects currently managed by the application.
Inertias property in object SPAWorkbench: Returns the Inertias collection.
InfRange property in object FreeParameter: Returns or sets the inferior bound of the free parameter object.
InheritanceMode property in object PositionedMaterial: Returns or sets the inheritance mode of an applied material.
Init method in object FunctionalFacet: Init resources for the Facet.
InitFileGenerator method in object ManufacturingOutputGenerator: Init the Output Generator on the current Object and initialise all datas.
InitResources method in object SfmManager: Initialize environment (PRM resources).
InitStatus property in object TCPTraceManager: Indicates whether the tracing capability must delete previous traces when the simulation starts.
InitialDirectionComputationMode property in object HybridShapePositionTransfo: Gets or sets the computation mode of the X axis (or direction) of the initial axis system.
InitialElement property in object HybridShapeBoundary: Returns or sets the element used to initialize the boundary propagation.
InitialGap property in object ABQGasketProperty
InitialInc property in object ABQHeatTransferStep: ets or returns the initial increment size.
InitialInc property in object ABQGeneralStaticStep: eturns or sets the size of the initial increment.
InitialThickness property in object ABQGasketProperty
InitialThicknessType property in object ABQGasketProperty
InitialThickness_Type enum: Stabilization initial thickness.
InitialVoid property in object ABQGasketProperty
Initial_Model_File_Path property in object V4WritingSettingAtt: Returns or sets the initial model file path.
Initialization method in object PspApplication: Initializes the application environment (load feature start up objects, activate the application.
Initialize method in object DeviceSim: Initializes the WDM world.
Input property in object StrMemberExtremity: Returns or sets the input object defining the extremity.
InputFileFormat property in object ABQJob: Sets or returns the format of the input file generated by the job.
InputProducts property in object Resource
InputSupport property in object StrMember: Retrieves the input support.
InputsCount property in object ShapeInstance: Returns the number of Inputs.
InputsCount property in object HybridShapeInstance: Returns the number of Inputs.
Insert method in object ABQSteps: Creates a new Abaqus Step and inserts it to the collection of Abaqus steps.
Insert property in object ManufacturingToolAssembly: Returns the insert of an assembly.
Insert property in object ManufacturingToolAssembly2: Set the insert of an assembly.
InsertActivity method in object MachiningProcess: This method creates and inserts a Manufacturing Activity in the Machining Process.
InsertAfter method in object Shots: Adds a shot to a specific location to the shots collection.
InsertAfter method in object DrawingTextRange: Inserts a character string at the end of the drawing text range.
InsertAt method in object AMPPath: Function to insert an AMPTag at a given index of the AMPPath.
InsertBefore method in object DrawingTextRange: Inserts a character string at the beginning of the drawing text range.
InsertBoundAfterPosition method in object HybridShapeFill: Inserts the boundary after specified position in the Fill.
InsertControlPointAfter method in object Spline2D: Inserts control points in the spline.
InsertCoupling method in object HybridShapeLoft: Inserts a coupling to the loft.
InsertCoupling method in object HybridShapeBlend: Inserts a coupling into the blend.
InsertCouplingPoint method in object HybridShapeLoft: Inserts a coupling point to a coupling of the lofted surface.
InsertCouplingPoint method in object HybridShapeBlend: Inserts a coupling point to a coupling of the blend.
InsertCurves method in object HybridShapeWrapCurve: Inserts a couple of reference curve and target curve to the wrap curve.
InsertDraftAngleDefinitionLocation method in object HybridShapeSweepLine: Inserts a geometrical element and a value necessary for draft angle definition after a given position in the lists.
InsertElement method in object HybridShapePolyline: Inserts the element at a specified position in the polyline.
InsertHybridShape method in object Body: Insert a hybrid shape to the body.
InsertHybridShape method in object OrderedGeometricalSet: Inserts a hybrid shape to the ordered geometrical set.
InsertIntoRouteWithInfo method in object SchComponent: Insert a component into a route.
InsertLevel property in object N4DNavigatorSettingAtt: Returns or sets the level for the Import Applicative Data command (True : at highest review level, False : in current review).
InsertMode property in object N4DNavigatorSettingAtt: Returns or sets the mode for the Import Applicative Data command (CatSacSettingsEnumNoInsert no import of applicative data, CatSacSettingsEnumAutomatic the import of applicative is automatic, CatSacSettingsEnumUserPrompt the user can select the applicative data to import).
InsertOperation method in object ManufacturingProgram: Insert an existing Manufacturing Operation to a Manufacturing Program.
InsertReferenceCurve method in object HybridShapeWrapCurve: Inserts a of reference curve to the wrap curve.
InsertSectionToLoft method in object HybridShapeLoft: Inserts a loft section.
InsertToolMotion method in object ManufacturingOperation: Create, given its type, a Manufacturing ToolMotion inside a sequential operation.
InsertType property in object ManufacturingInsert: Return the technological type of a the insert.
InsertVariable method in object DrawingText: Sets a Parameter in a string of the drawing text.
InsertViewAngle method in object DrawingView: Insert the Angle parameter in the text of the drawing text.
InsertViewScale method in object DrawingView: Insert the scale parameter in the text of the drawing text.
InsertionLevel property in object MachiningProcess: This property defines the insertion level in the program receiving the resulting operations.
InstanceCount property in object DimensionPattern: Get count of instances.
InstanceCount property in object SemanticGDTNxDisplay: Gets count of instances.
InstanceFactory object: Represents the CATIAInstanceFactory.
InstanceName method in object ArrBendableString: Returns the Bendable's Instance Name.
InstanceSpacing property in object AngularRepartition: Returns the angle at which the pattern spacing is done for unequal angular spacing mode.
InstancesCount property in object Repartition: Returns the total number of copied shapes.
InstanciateNOA method in object AnnotationFactory: Instanciate an NOA from a Reference NOA.
InstanciateNOA method in object AnnotationFactory2: Instanciate an NOA from a Reference NOA.
Instantiate method in object InstanceFactory: Instantiates the reference in the current document.
Instantiate method in object MachiningProcess: This method enables to apply a Machining Process to an any feature.
InstantiateInProductContext method in object MachiningProcess: This method enables to apply a Machining Process to a given feature by taking into account the product from which it belongs to.
InstantiationMode property in object InstanceFactory: Sets the mode of instantiation to "Inside" or "After".
InsureFilterNamesUniqueness property in object Layout2DSettingAtt: Returns the InsureFilterNamesUniqueness attribute value to apply to a Layout at its creation parameter.
InsureSheetNamesUniqueness property in object Layout2DSettingAtt: Returns the InsureSheetNamesUniqueness attribute value to apply to a Layout at its creation parameter.
InsureViewNamesUniqueness property in object Layout2DSettingAtt: Returns the InsureViewNamesUniqueness attribute value to apply to a Layout at its creation parameter.
InsureViewNamesUniquenessScope property in object Layout2DSettingAtt: Returns the InsureViewNamesUniquenessScope parameter.
IntParam object: Represents the integer parameter.
IntSysClassName property in object ArrNomenclature: Gets/Sets the internal class names for System nomenclatures.
IntegratedLaw property in object HybridShapeFilletBiTangent: Gets or sets Integrated Law to manage Variable Shape Fillet with law.
IntegrationType property in object StiEngine: Returns the Engine Integration Type.
Intensity property in object RenderingLight: Returns or sets the light intensity of a light.
InteractionProperty property in object ABQSurfaceToSurfaceContact: Sets or returns the interaction property in a contact pair.
Interactions property in object ABQStep: Returns the ABQInteractions container associated with the step.
Interactive property in object Application: Returns or sets the application sensitivity to end user interactions.
InteractiveOpen method in object CD5Engine: Launches the Interactive ENOVIA V6 Open Command and performs the search with the input CD5ID.
InterferenceFit property in object ABQSurfaceToSurfaceContact: Assigns / gets interference fit of a contact pair.
InterferenceFitAmplitude property in object ABQSurfaceToSurfaceContact: Assigns / gets interference fit amplitude of a contact pair.
InterferenceType property in object Clash: Returns or sets the interference type for the computation.
InternalMaxDeformation property in object V4V5SpaceSettingAtt: Returns or sets the activation state of mode with internal deformation (Curve Improvement).
InternalThickness property in object Shell: Returns the shell internal thickness.
InternalTypeDeformation property in object V4V5SpaceSettingAtt: Returns or sets the activation state of type for internal deformation (Curve Improvement).
InteropSettingAtt object: Represents the object to handle the setting parameters of the "V4 Data Reading" tab page.
Interpolater property in object Sampled: Retrieves/sets the sampled's interpolater.
InterpolationMethod property in object SWKAnthro: Returns or sets the interpolation.
Intersect object: Represents the intersect boolean operation.
IntersectMode property in object HybridShapeIntersection: Returns or sets the IntersectMode flag for intersect.
IntersectingElement property in object SfmOpening: Returns or Sets the Intersecting Element to Create a Opening.
IntersectionComputation property in object HybridShapeTrim: Gets or sets Intersection computation mode.
IntersectionComputation property in object HybridShapeSplit: Gets or sets Intersection computation mode.
IntervalType property in object ABQIAABQSteadyStateLinDynStepBasicVB: Returns or sets Interval Type.
InverseMode property in object AnalysisColorMap
InverseOrientation method in object Sketch
Invert property in object HybridShapeAssemble: Returns or sets the invert mode.
InvertAxis property in object HybridShapeHelix: Reads / Modifies the orientation .
InvertAxis property in object HybridShapeSpiral: Reads / Modifies the orientation .
InvertDirection method in object HybridShapeSpline: Inverts the orientation of the tangent direction .
InvertDirection property in object HybridShapeCurvePar: Returns or sets the orientation.
InvertDirection method in object FunctionalAction: Invert the action's Direction.
InvertDirection property in object HybridShape3DCurveOffset: Returns or sets the direction orientation.
InvertDirection method in object SfmMemberPointLength: Inverts the direction orientation.
InvertDirection method in object SfmMemberPointUpToLimit: Inverts the direction orientation.
InvertEndPointOnCrvOrientation method in object SfmMember2Points
InvertFirstOrientation method in object HybridShapeTrim
InvertFirstOrientation method in object HybridShapeCorner: Inverts the first reference element orientation used to compute the corner.
InvertFirstOrientation method in object HybridShapeFilletBiTangent: Inverts first orientation used to specify fillet center position.
InvertFirstOrientation method in object HybridShapeFilletTriTangent: Inverts first orientation used to specify fillet center position.
InvertLimit method in object SfmSuperPlate: Invert a limit orientation by its index or its name.
InvertMappingLaw property in object HybridShapeCurvePar: Returns or sets the mapping orientation of the law (if offset is specified by a law).
InvertMappingLaw property in object HybridShapeIntegratedLaw: Gets or sets the mapping orientation of the law.
InvertMasterSurface property in object ABQFastenedPair: Sets or returns the invert master surface flag.
InvertMasterSurface property in object ABQFastenedConnectionEnhancement: Sets or returns the invert master surface flag.
InvertMode method in object DrawingTable: Sets a mode of table inversion.
InvertOrientation method in object HybridShapeSplit: Inverts the orientation used to compute the split.
InvertOrientation method in object HybridShapeCylinder: Inverts the Orientation of Cylinder object.
InvertOrientationDirection method in object HybridShapeReflectLine: Inverts the orientation of direction.
InvertOrientationSupport method in object HybridShapeReflectLine: Inverts the orientation of support.
InvertReferenceSurface method in object SfmMemberCurve: Inverts the reference surface orientation.
InvertRemoveOrientation method in object HybridShapeFilletTriTangent: Inverts third orientation used to specify fillet center position.
InvertSecondOrientation method in object HybridShapeTrim
InvertSecondOrientation method in object HybridShapeCorner: Inverts the second reference element orientation used to compute the corner.
InvertSecondOrientation method in object HybridShapeFilletBiTangent: Inverts second orientation used to specify fillet center position.
InvertSecondOrientation method in object HybridShapeFilletTriTangent: Inverts second orientation used to specify fillet center position.
InvertSlaveSurface property in object ABQFastenedPair: Sets or returns the invert slave surface flag.
InvertSlaveSurface property in object ABQFastenedConnectionEnhancement: Sets or returns the invert slave surface flag.
InvertStartPointOnCrvOrientation method in object SfmMember2Points: Inverts the orientation of the offset for an extremity point.
IsACollection method in object SemanticGDTNxDisplay: Checks if GDT is Collection of Features.
IsACompositeTolerance method in object Annotation: To know if the Annotation is a composite Tolerance.
IsACompositeTolerance method in object SemanticGDT: Role: Checks if the GDT is a Composite Tolerance.
IsAConsumableAnnotation method in object Annotation2: Checks if the Annotation is a Consumable Annotation.
IsAContinuousFeatureApplied method in object Dimension3D: Checks if the Semantic Dimension is a applied on a Continuous Feature.
IsADefaultAnnotation method in object Annotation: To know if the Annotation is a Default Annotation.
IsADefaultAnnotation method in object Annotation2: Checks if the Annotation is a Default Annotation.
IsADimensionPattern method in object Annotation: To know if the Annotation is a Dimension Pattern.
IsADimensionPattern method in object Dimension3D: Checks if the Semantic Dimension is a Dimension Pattern.
IsAPlateOpening method in object SfmOpening: Determines if it is a Plate Opening or a Profile one.
IsAProjectedToleranceZone method in object Annotation: To know if the Annotation is a Projected Zone.
IsAProjectedToleranceZone method in object SemanticGDT: Role: Checks if the GDT is a Projected Zone.
IsARefPlane method in object Plane: Queries whether the plane is a reference plane (fixed axis plane).
IsAReference method in object SchComponent: Query whether the component is a reference (as opposed to an instance).
IsASeparate method in object SemanticGDTNxDisplay: Checks if GDT is Separate Features.
IsAShiftedProfileTolerance method in object Annotation: To know if the Annotation is a Shifted Profile Tolerance.
IsAShiftedProfileTolerance method in object SemanticGDT: Role: Checks if the GDT is a Shifted Profile Tolerance.
IsASuperObject property in object SfmObjectExt: Returns whether the structural object is super object.
IsATangentPlane method in object Annotation: To know if the Annotation is a Tangent Plane.
IsAToleranceUnitBasisValue method in object Annotation: To know if the Annotation is a Tolerance Unit Basis Value.
IsAToleranceUnitBasisValue method in object SemanticGDT: Role: Checks if the GDT is a Tolerance Unit Basis Value.
IsAToleranceZone method in object Annotation: Is the a Tolerance Zone.
IsAToleranceZone method in object SemanticGDT: Role: Checks if a Tolerance Zone exists.
IsAnAssociatedRefFrame method in object Annotation: To know if the Annotation is an Associated Reference Frame.
IsAnAssociatedRefFrame method in object SemanticGDT: Role: Checks if the GDT is an Associated Reference Frame.
IsAngleModeValid method in object SfmStiffener: Gets the status about the validity of the angle mode regarding the nature of the web support (curve or surface).
IsAppliedOnMultipleEntities method in object SemanticGDT: Role: Checks if the geometrical specification is applied onto multiple geometries.
IsArrowShown method in object SchArrowDisplay: Query whether flow arrows are shown (arrow attributes exist).
IsAssemble method in object HybridShapeExtrapol: Retrieves whether extrapolation is assembled with extrapolated curve or surface.
IsAttached method in object SWKSegment
IsBalanced method in object SWKBody
IsBoundaryValid method in object SchGRRZone: Check whether the boundary of this zone graphical representation is valid.
IsCFOType method in object StiDBItem: Returns if the CATIA Document -associated to the CATIAStiDBItem- is a Component File or not.
IsChildMA method in object DNBAttachment
IsClipped property in object DrawingDimension: Returns the clipping status of the dimension.
IsCntrConnected method in object PspConnector: Query whether the connector has been connected.
IsConnected method in object CD5Engine: Returns if end user is connected to ENOVIA V6 (True) or not (False).
IsConnected method in object StiEngine: Returns if end user Is Connected to SmarTeam Integration (True) or not (False).
IsConst property in object KnowledgeObject: Returns or sets wether the relation is Const or should be Const.
IsContourClosed method in object ManufacturingPrismaticMachiningArea: Return the status of one contour of a Manufacturing Prismatic Machining Area : closed or open.
IsCurrent property in object AxisSystem: Returns True if the axis system is the current one, else returns False.
IsDOFAt0 property in object SWKSegment: Returns <code>True</code> if there is a DOF at index 0, <code>False</code> otherwise.
IsDOFAt1 property in object SWKSegment: Returns <code>True</code> if there is a DOF at index 1, <code>False</code> otherwise.
IsDOFAt2 property in object SWKSegment: Returns <code>True</code> if there is a DOF at index 2, <code>False</code> otherwise.
IsDefined property in object Distance: Returns a diagnosis on the distance.
IsDerived method in object PspAttribute: Retrieve Derived status for the input attribute.
IsDetail method in object DrawingSheet: Checks whether the sheet is a detail sheet.
IsDetail method in object Layout2DSheet: Checks whether the sheet is a detail sheet.
IsDeviceMounted method in object MountManager: Checks if the device is mounted or not on a robot.
IsDiscrete method in object PspAttribute: Query whether the input attribute is discrete or not.
IsEmpty method in object Section: Indicates whether the section is empty.
IsEqualTo method in object RealParam: Tests the equality of the parameter value with a given value.
IsFederated property in object HybridShapeExtract: Returns or sets the IsFederated flag checked/unchecked for the extract.
IsFlip method in object SfmMember: Get the flip status of the member's section.
IsFromTop property in object Stiffener: Returns or sets whether the stiffener is From Side or From Top.
IsGapShown method in object SchGapDisplay: Query whether gaps are shown (gap attributes exist).
IsGenerative method in object DrawingView: Returns whether the drawing view has a generative behavior.
IsGeodesic method in object HybridShapeCircleCtrPt: Queries whether the circle is geodesic or not.
IsGeodesic method in object HybridShapeCircleCtrRad: Queries whether the circle is geodesic or not.
IsGeodesic method in object HybridShapeCircle2PointsRad: Queries whether the circle is geodesic or not.
IsGeometricallyAccessibleOnSetup method in object ManufacturingOperation: Returns True if the Manufacturing Axial Operation is geometrically accessible on the given Manufacturing Setup.
IsHeterogeneousLaw method in object HybridShapeLawDistProj: Queries whether Heterogeneous Law mode is active or not.
IsIDGenerated method in object PspID: Checks if the ID on the object is generated( based on the ID Schema).
IsInAutomaticSearchMode method in object DefaultAnnotation: Get the type of search algo Return E_FAIL if the annotation is not a default one.
IsInactive method in object Part: Indicates whether an object is deactivated.
IsInactive method in object Constraint: Indicates whether a constraint is suppressed from the update process.
IsInserted method in object SchComponent: Query whether the component is inserted into a route.
IsLinkedTo method in object DrawingThread: Specifies which kind of objects the thread is linked to.
IsModal method in object ManufacturingOutputGenerator: Return the characteristic of an object : Modal or Not Modal.
IsOKToIntegrate method in object PspFunctional: Check it is OK to integrate (realize) this function with a physical part.
IsObjectReachable method in object SWKSegment: Reachability check.
IsOnHand property in object SWKSegment: This property is True if this segment belongs to the manikin's hand.
IsOnLeftSide property in object SWKSegment: This property is True if this segment is on the left side of the manikin.
IsOnRightSide property in object SWKSegment: This property is True if this segment is on the right side of the manikin.
IsOnSpine property in object SWKSegment: This property is True if this segment belongs to the manikin's spine.
IsParentMA method in object DNBAttachment
IsPeriodic method in object Curve2D: Specifies whether a curve is periodic or not.
IsProductAuthorized method in object SystemConfiguration: Returns <tt>True</tt> if the specified product is authorized, <tt>False</tt> otherwise.
IsReachable method in object SWKSegment: Reachability check.
IsRealized method in object PspFunctional: Checks if the Function object is realized or not.
IsRoot method in object StiDBItem: Returns if the CATIA Document -associated to the CATIAStiDBItem- is a Root.
IsSimilarTo method in object ManufacturingOutputGenerator: Implement a method to specify if two objects are same (when Modal Mode).
IsSketchAxisUsedAsDefault method in object HybridShapeSweepExplicit: Queries status wherere Sketch axis used as default or not.
IsSpaceReserved property in object ElecSchematicObject
IsSpecDriven method in object PspFunctional: Checks if the functional object is specification driven or not.
IsStopDialog method in object SetOfEquation: Returns whether the "Stop Dialog" will be shown during calculations.
IsSubTypeOf method in object Activity: This method allows to test the type of a specific activity.
IsSuccess property in object SWKIKConstraint: Returns whether the resolution of this constraint is a success or a failure, given the current criteria.
IsSymmetric property in object Prism: Returns the prism symmetry flag.
IsSymmetric property in object Stiffener: Returns or sets whether the stiffener is symmetric.
IsSymmetric property in object AssemblyPocket: Returns or sets the pocket symmetry flag.
IsSystemNomenclature method in object ArrNomenclature: Returns TRUE if the nomenclature happens to be a system nomenclature.
IsTargetOKForInsert method in object SchCompatible: Query whether an object is compatible to be inserted into a route This method is used when placing a component.
IsTargetOKForPlace method in object SchCompatible: Query whether an object is compatible to be connected to another component This method is used when placing a component.
IsTargetOKForRoute method in object SchCompatible: Query whether an object is compatible to be connected to a route.
IsThin property in object Sweep: Returns the Sweep thin flag.
IsThin property in object Prism: Returns the prism thin flag.
IsThin property in object Revolution: Returns the Revol thin flag.
IsTrueParameter property in object Parameter: Returns a boolean saying if the parameter is a true one (real, dimension, string, etc.
IsUpToDate method in object Part: Indicates whether an object needs to be updated.
IsUseOnly method in object ExpertRuleBaseComponentRuntime: Retrieves the use-only status of the component.
Isactivate method in object ExpertRuleBaseComponentRuntime: Tells if the RuleBaseComponent is active.
IslandsCount property in object ManufacturingPrismaticMachiningArea: Retreives the number of Island of a Manufacturing Prismatic Machining Area.
Isolate method in object DrawingView: Isolates the drawing view.
Isolate method in object DrawingRoot: Isolates all the drawing views of all the drawing sheets of the drawing document.
Isolate method in object DrawingSheet: Isolates the drawing sheet.
Isolate method in object DrawingDocument: Isolates all the drawing views of all the drawing sheets of the drawing document.
IsoparGenerationMode property in object VisualizationSettingAtt: Returns the IsoparGenerationMode parameter.
IssueRepositoryPath property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the IssueRepositoryPath attribute.
Italic property in object DrawingTextProperties: Returns or sets the drawing text font italic property.
Item object: The object that represents an item.
Item method in object Files: Returns a file using its index or its name from the file collection.
Item method in object Cameras: Returns a camera using its index or its name from the Cameras collection.
Item method in object Folders: Returns a folder using its index or its name from the folder collection.
Item method in object Viewers: Returns a viewer using its index from the Viewers collection.
Item method in object Windows: Returns a window using its index or its name from the Windows collection.
Item method in object Printers: Returns a printer using its index or its device name from the Printers collection.
Item method in object Items: This method returns the idl object Item for the specified item identifier.
Item method in object Selection
Item method in object Documents: Returns a document using its index or its name from the documents collection.
Item method in object References: Returns a reference using its index or its name from the References collection.
Item method in object Outputs: This method can be used to get the associated output product.
Item method in object CD5IDs: Returns (gets) CD5ID from the list of ids.
Item method in object PPRProducts: Retrieves the Product corresponding to the specified index in the list of Products.
Item method in object Bodies: Returns a body using its index or its name from the Bodies collection.
Item method in object Shapes: Returns a shape using its index or its name from the Shapes collection.
Item method in object ABQJobs
Item method in object Resources: This method returns the idl object Resource for the specified resource identifier.
Item method in object TPSViews: Retrieve a TPS View.
Item method in object LightSources: Returns a light source from its index in the LightSources collection.
Item method in object ABQLoads
Item method in object Captures: Retrieve a Capture.
Item method in object Shots: Returns a shot using its index from the colection.
Item method in object ABQSteps
Item method in object Sketches: Returns a sketch using its index or its name from the Sketches collection.
Item method in object Activities: This method gets the specified activity on the current activities management.
Item method in object ABQFields
Item method in object Materials: Returns a material from its index in the Material collection.
Item method in object ProductScenes: Returns a scene using its index or its name from the ProductScenes collection.
Item method in object DraftDomains: Returns a draft domain using its index or its name from the DraftDomains collection.
Item method in object Sampleds: Returns a CATIASampled object using its index from the CATIASampled collection.
Item method in object Shuttles
Item method in object MfgAssembly: Returns one assigned Part (Product, Resource or other MA/MK) of the Manufacturing Assembly.
Item method in object Annotations: Retrieves an Annotation managing by CATIAAnnotation.
Item method in object List: Retrieves a Feature using its index or its name from the Features collection.
Item method in object AxisSystems: Returns an Axis System using its index or its name from the AxisSystems collection.
Item method in object Constraints: Returns a constraint using its index or its name from the Constraints collection.
Item method in object CD5SaveItems: Returns (gets) an item from the list of items in the current save scope.
Item method in object CD5Templates: Returns (gets) an item from the list of items.
Item method in object Units: Returns a unit using its index or its name from the from the Parameters collection.
Item method in object UserSurfaces: Find a user surface inside the collection.
Item method in object HybridBodies: Returns a body using its index or its name from the Bodies collection.
Item method in object HybridShapes: Returns a HybridShape using its index or its name from the HybridShapes collection.
Item method in object FixTogethers: Returns a FixTogether using its index or its name from the FixTogethers collection.
Item method in object Groups: Returns a group using its index or its name from the Groups collection.
Item method in object CD5Properties: Returns ENOVIA V6 object property specified by 1 based index.
Item method in object ABQProperties
Item method in object DrawingGDTs: Returns a drawing GDT using its index from the drawing GDTs collection.
Item method in object DNB3DStates: Returns the 3D state object.
Item method in object Marker2Ds: Returns a marker 2D using its index from the Marker2Ds collection.
Item method in object Marker3Ds: Returns a marker 3D using its index from the Marker3Ds collection.
Item method in object Joints: Returns a Joint using its index or its name from the Joints collection.
Item method in object Relations: Retrieves a relation using its index or its name from the Relations collection.
Item method in object StrPlates: Returns a plate from its index in the Plates collection.
Item method in object AnnotationSets: Retrieve a set.
Item method in object Parameters: Retrieves a parameter using its index or its name from the from the Parameters collection.
Item method in object DMUReviews: Returns a DMUReview using its index or its name from the DMUReviews collection.
Item method in object StrMembers: Returns a member from its index in the Members collection.
Item method in object Hyperlinks: Returns an Hyperlink using its index from the Hyperlinks collection.
Item method in object DrawingViews: Returns a drawing view using its index or its name from the DrawingViews collection.
Item method in object Dressups: Returns a Dressup using its index or its name from the Dressups collection.
Item method in object DrawingTexts: Returns a drawing text using its index from the DrawingTexts collection.
Item method in object ABQMassScalings
Item method in object RenderingLights: Returns a rendering light index in the rendering light collection.
Item method in object ABQInteractions
Item method in object DrawingTables: Returns a drawing table using its index from the DrawingTables collection.
Item method in object DrawingSheets: Returns a drawing sheet using its index or its name from the DrawingSheets collection.
Item method in object DrawingArrows: Returns a drawing arrow using its index from the DrawingArrows collection.
Item method in object CD5TemplateTypes: Returns (gets) an item from the list of items.
Item method in object SettingControllers: Returns a setting controller using its name from the setting controllers collection.
Item method in object Mechanisms: Returns a Mechanism using its index or its name from the Mechanisms collection.
Item method in object MaterialFamilies: Returns a material family from its index in the MaterialFamilies collection.
Item method in object ABQAnalysisCases
Item method in object ABQSolutionSteps
Item method in object ABQDisplayGroups
Item method in object DrawingLeaders: Returns a drawing leader using its index from the DrawingLeaders collection.
Item method in object DrawingThreads: Returns a drawing thread using its index from the DrawingThreads collection.
Item method in object Behaviors: Returns a Behavior using its index or its name from the Behaviors collection.
Item method in object DefeaturingFilters: Returns the filter of the Defeaturing filters collection using its index or its name.
Item method in object ParameterSets: Returns a parameter set using its index or its name from the ParameterSets collection.
Item method in object Optimizations: Retrieves an optimization using its index or its name from the Optimizations collection.
Item method in object GeometricElements: Returns a geometric element using its index or its name from the GeometricElements collection.
Item method in object ResourceCollection: This method gets the specified resource from the given resource collection management.
Item method in object DrawingWeldings: Returns a drawing welding using its index from the drawing weldings collection.
Item method in object DrawingPictures: Returns a drawing picture using its index or its name from the DrawingPictures collection.
Item method in object ABQOutputRequests
Item method in object FreeParameters: Retrieves an optimization using its index or its name from the Free Parameters collection.
Item method in object AnnotatedViews: Returns an annotated view using its index or its name from the AnnotatedViews collection.
Item method in object StrFoundations: Returns a Foundation from its index in the Foundations collection.
Item method in object DrawingCoordDims: Returns a drawing CoordDim using its index from the drawing CoordDims collection.
Item method in object Layout2DViews: Returns a Layout2D view using its index or its name from the Layout2DViews collection.
Item method in object Clashes: Returns a Clash object using its index or its name from the Clashes collection.
Item method in object RenderingShootings: Returns a renderingshooting index in the renderingshootings collection.
Item method in object AnalysisSets: Returns an analysis set using its index or its name from the analysis sets collection.
Item method in object StrAnchorPoints: Returns an anchor point from its index in the anchor points collection.
Item method in object Inertias: Returns an Inertia object using its index or its name from the Inertias collection.
Item method in object Sections: Returns a Section object using its index or its name from the Sections collection.
Item method in object HumanTaskList
Item method in object Layout2DSheets: Returns a Layout sheet using its index or its name from the Layout2DSheets collection.
Item method in object AnalysisCases: Returns a case using its index or its name from the case collection.
Item method in object Distances: Returns a Distance object using its index or its name from the Distances collection.
Item method in object Conflicts: Returns a Conflict object using its index from the Conflicts collection.
Item method in object DrawingDimensions: Returns a drawing dimension using its index or its name from the DrawingDimensions collection.
Item method in object DrawingComponents: Returns a drawing component instance using its index or its name from the DrawingComponents collection.
Item method in object AnalysisImages: Returns an analysis image using its index or its name from the analysis images collection.
Item method in object AnalysisModels: Returns an analysis model using its index or its name from the analysis model collection.
Item method in object PspListOfBSTRs: Returns a character string from its index in the list.
Item method in object PspListOfLongs: Returns a long integer from its index in the list.
Item method in object BasicComponents: Returns an Basic Component using its index or its name from the Basic Components collection.
Item method in object ClashResults: Returns a ClashResult object using its index or its name from the ClashResults collection.
Item method in object ABQSolutionCaseImages
Item method in object MechanismCommands: Returns a MechanismCommand using its index or its name from the Commands collection.
Item method in object ABQSolutionStepImages
Item method in object AssemblyFeatures: Returns an AssemblyFeature object using its index or its name from the AssemblyFeatures collection.
Item method in object ABQBoundaryConditions
Item method in object AnalysisEntities: Returns an analysis entity using its index or its name from the analysis entities collection.
Item method in object MfgActivities: This method return the specified CATIAManufacturingActivity in the current list CATIAMfgActivities.
Item method in object RenderingEnvironments: Returns an environment index in the environments collection.
Item method in object ABQDataOutputRequests
Item method in object AnalysisSupports: Returns analysis support object information using its index in the collection.
Item method in object PspListOfObjects: Returns an object from its index in the list.
Item method in object PspListOfDoubles: Returns a double from its index in the list.
Item method in object AnalysisMeshParts: Returns a meshpart using its index or its name from the meshpart collection.
Item method in object OrderedGeometricalSets: Returns a ordered geometrical set using its index or its name from the ordered geometrical set collection.
Item method in object AssemblyAnnotationSets: Retrieve a set.
Item method in object SfmWelds: Gets Weld Feature.
Item method in object SfmSlots: Gets existing Slot.
Item method in object SchListOfBSTRs: Returns a character string from its index in the list.
Item method in object ABQFieldOutputRequests
Item method in object Products: Returns a product from its index in the Products collection.
Item method in object SchListOfLongs: Returns a long integer from its index in the list.
Item method in object ArrangementRuns: Returns the specified ArrangementRun item of the collection object.
Item method in object SchListOfObjects: Returns an object from its index in the list.
Item method in object SchListOfDoubles: Returns a double from its index in the list.
Item method in object StiDBChildren: Returns the CATIAStiDBItem from its index in the CATIAStiDBChildren.
Item method in object ArrangementAreas: Returns the specified item of the collection.
Item method in object ArrangementNodes: Returns the specified ArrangementNode item of the collection.
Item method in object Publications: Returns the publication object corresponding to the given publication name.
Item method in object ArrNomenclatures
Item method in object SfmReferences: Retrieves a Reference from the collection of SfmReferences.
Item method in object ExpertReportObjects: Retrieves a Report component using its index or its name from the Check collection.
Item method in object ABQHistoryOutputRequests
Item method in object SfmSplitPlates: Gets Split Plate.
Item method in object AnalysisLocalEntities: Returns an analysis entity using its index or its name from the analysis entities collection.
Item method in object OptimizationConstraints: Returns an optimization constraint using its index or its name from the optimization constraints collection.
Item method in object AnalysisOutputEntities: Returns an analysis entity using its index or its name from the analysis entities collection.
Item method in object ArrangementPathways: Returns the specified ArrangementPathway item of the collection object.
Item method in object ArrangementContours: Returns the specified ArrangementContour item of the collection.
Item method in object AnalysisLinkedDocuments: Returns a Document by its index or its name from the linked Documents collection.
Item method in object ManufacturingFeatures: Retrieve the Manufacturing Feature of a the specified index from the Collection.
Item method in object ArrangementRectangles: Returns the specified ArrangementRectangle item of the collection object.
Item method in object ArrangementBoundaries: Returns the specified ArrangementBoundary item of the collection.
Item method in object ManufacturingPrecedences: Returns a precedence object from the precedence collection.
Item method in object SfmConnectionParameters: Gets a Item from the collection list.
Item method in object ArrangementItemReservations: Returns the specified ArrangementItemReservation item of the collection.
Item method in object ExpertRuleBaseComponentRuntimes: Returns a RuleBase component using its index or its name from the entire RuleBase collection.
Item method in object SfmStandardContourParameters: Gets a Reference from the collection.
Item method in object SfmStandardPosStrategyParameters
Item2 method in object Selection: Returns the iIndex-th SelectedElement object contained by the current selection.
Item2 method in object Annotations
ItemAssignmentType enum: The Analysis Level setting attribute range of values.
ItemByAssignmentType method in object Items: This method returns the item assocated with the activity with given Assignment Type.
ItemByType method in object AnalysisSets: Returns an analysis set using its type from the analysis sets collection.
ItemExplicit method in object Group: Returns a product using its index in the group.
ItemExtract method in object Group: Returns a product which can be extracted from the group using its index.
ItemInvert method in object Group: Returns a terminal node product which cannot be extracted from the group using its index.
ItemObject method in object Marker3D: Returns an object which is linked to the marker 3D using its index.
ItemObject method in object Hyperlink: Returns an Url which is linked to the Hyperlink using its index.
ItemToCopy property in object Pattern: Returns or sets the shape to be copied.
Items object: The collection of items related to the current activity.
Items property in object Activity
Items property in object CD5SaveOperation: Returns (gets) the collection of all the items in the scope of the Save.
ItemsFilter property in object TreeTabSettingAtt
ItemsPerRelationFilter property in object TreeTabSettingAtt