IDL API Master Index

M

MAName property in object MfgAssembly: Returns or sets the Name of the Manufacturing Assembly.
MAPartNumber property in object MfgAssembly: Returns or sets the Part Number of the Manufacturing Assembly.
MAType property in object MfgAssembly: Returns the Type of the Manufacturing Assembly.
MHILoadParameters object: Interface representing a means to set information that is needed for the load and also to retrieve this information on the loaded document.
MHIOpenAccess object: Interface representing a means to load data from the Hub into V5.
MHIRelationManagement object: Interface to access all supported relation types and a relation object's atrribute provider to access it's attributes Role: This interface, given a V5 process, product(or resource) object and the relation type will get the handle to the relation object's attribute provider.
MHISaveAccess object: Interface representing a means to (1) Save data to the Hub (2) Retrieve certain information on the loaded document DNBIAMHISaveAccess is implemented on Document.
MSGE property in object ErrorlogStatisticsSettingAtt: Returns or sets the state ot the message field.
MTPActColor property in object HtsTaskDisplaySettingAtt: Returns or sets the MTPActColor parameter.
MTPActSymbol property in object HtsTaskDisplaySettingAtt: Returns or sets the MTPActSymbol parameter.
MachinableFeature property in object ManufacturingActivity: Retrieve the machinable area of a Manufacturing Activity.
MachinableGeometryCount method in object ManufacturingMachinableArea: Returns the machinable geometry list count.
Machine property in object ManufacturingSetup: Give the Machine linked to a Manufacturing Setup.
MachineType property in object ManufacturingMachine: Return the Type of a Machine.
MachiningAxisSystem property in object ManufacturingSetup: Retrieves the Machining Axis system from a Manufacturing Setup.
MachiningProcess object: MachiningProcess defines a set of properties and methods to apply a Machining Process to a geometrical feature (design or manufacturing).
MachiningTime property in object ManufacturingActivity: Retreive the milling time of a Manufacturing Activity.
MacrosSettingAtt object: Setting controller for the Macros tab page.
Magnitude property in object ABQPressure: ets or returns the magnitude of the pressure load.
Magnitude property in object Unit: Returns the magnitude associated to the unit.
Magnitude property in object ABQTemperature: ets or returns the magnitude of the temperature field.
Magnitude property in object ABQTemperatureBC: ets or returns the magnitude of the temperature boundary condition.
MailClientLaunchMode property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the MailClientLaunchMode attribute.
MainBody property in object Part: Returns or sets the main body of the part.
MainDraftAngle property in object AutoDraft: Returns or sets the main draft angle.
MajorRadius property in object Ellipse2D
MakeUserSurfaceNode method in object UserSurfaces: Usefull to create a User Surface Node from two others User Surface.
MakeUserSurfaceNode2 method in object UserSurfaces: Usefull to create a User Surface Node from a list of User Surfaces.
ManRefSiz property in object FTAInfraSettingAtt: Returns or sets the Manipulator Reference Size setting parameter value.
ManZooCap property in object FTAInfraSettingAtt: Returns or sets the Manipulator Zoom Capability setting parameter value.
ManageHideShowBody property in object Capture: Manages the visibility of Part instances, bodies and geometrical sets across the Capture.
Manifold property in object HybridShapeTrim: Gets or sets manifold mode.
Manikin property in object SWKIKManager: Returns the manikin which owns this IK manager.
Manikin property in object SWKBodyElement: Returns the manikin which owns this body element.
Manikin property in object SWKIKConstraint: Returns the manikin which owns this IK constraint.
ManipAutoInsert property in object ManipSettingAtt: Returns the ManipAutoInsert parameter Role: Returns the ManipAutoInsert (Automatic insert for manipulation mode) parameter.
ManipSettingAtt object: Interface to handle parameters of DMU Manip Tools Options Tab page Role: This interface is implemented by a component which represents the controller of DMU Manip Tools Options parameter settings.
Manual property in object SWKAnthroVariable: Returns or sets the management of the variable.
ManualCacheCleaning property in object CDMASettingAtt: Retrieves or sets the manual cache cleaning activation.
ManufacturingAPTGenerator object: Generator of APT output machining code.
ManufacturingActivity object: ManufacturingActivity defines a set of methods and mainly adds some specific methods and services in Manufacturing on ProcessPlan Activities.
ManufacturingActivityConnectedCount method in object ManufacturingMachinableArea: Returns the manufacturing activity connected list count.
ManufacturingActivitySyntax object: This interface offers services to manage PP words of activity.
ManufacturingActivitySyntax2 object: This interface offers services to manage PP words of activity.
ManufacturingActivityToolPath object: Interface to compute the tool path of an activity.
ManufacturingComputePMAParameters object
ManufacturingCopyTransformation object: Interface representing the Manufacturing Copy Transformation object.
ManufacturingFactories object: Interface to manage manufacturing factories.
ManufacturingFeature object: ManufacturingFeature defines a set of methods to access a Manufacturing Feature.
ManufacturingFeatureFactory object: Interface dedicated to machining features creation.
ManufacturingFeatures object: Collection of Manufacturing Features.
ManufacturingFeatures property in object ManufacturingView: Returns the Manufacturing Features of a Manufacturing View.
ManufacturingGeneratorData object: Represents the manufacturing output stream object.
ManufacturingHole object: Hole Feature in Machining domain.
ManufacturingInsert object: The interface to access a CATIAManufacturingInsert.
ManufacturingMachinableArea object: Machinable Area in Manufacturing.
ManufacturingMachinableAreaMngt object: Interface dedicated to machinable area feature managment.
ManufacturingMachinableFeature object: Machinable Feature in Manufacturing.
ManufacturingMachinableGeometry object: Represents the machinable geometry object.
ManufacturingMachine object: Machine in machining domain.
ManufacturingMachiningAxis object: ManufacturingMachiningAxis defines a set of methods to manage a Machining Axis System or an Origin.
ManufacturingOperation object: ManufacturingOperation defines a set of methods.
ManufacturingOutput object: Object that represents the output machining code.
ManufacturingOutputGenerator object: Father object to generate output machining code.
ManufacturingParameter object
ManufacturingPattern object: The Manufacturing Pattern is a specialized feature used to machine the same item several times at several positions.
ManufacturingPrecedence object: Defines a precedence relation between objects.
ManufacturingPrecedences object: Interface that manage the precedences for an object of type @ CATIAManufacturingActivity.
ManufacturingPrismaticMachiningArea object: ManufacturingPrismaticMachiningArea defines a set of properties and methods.
ManufacturingProcess object: A ManufacturingProcess for a Manufacturing Document.
ManufacturingProgram object: A ManufacturingProgram for a Manufacturing Document.
ManufacturingProgram2 object: A ManufacturingProgram for a Manufacturing Document.
ManufacturingResourceFactory object: Interface to create manufacturing resources.
ManufacturingSetup object: A ManufacturingSetup for a Manufacturing Document.
ManufacturingSetup2 object: A ManufacturingSetup 2 for a Manufacturing Document.
ManufacturingSetup3 object: A ManufacturingSetup 3 for a Manufacturing Document.
ManufacturingSurfaceGeomArea object: Represents the Manufacturing Surface NCGeometry.
ManufacturingSurfaceMachiningArea object: Represents the Manufacturing Surface Machining Area.
ManufacturingTool object: A ManufacturingTool for a Manufacturing Document.
ManufacturingToolAssembly object: Represents the tool assembly.
ManufacturingToolAssembly2 object: Represents the tool assembly.
ManufacturingToolCorrector object: Manufacturing tool corrector.
ManufacturingToolMotion object: A ManufacturingToolMotion for a Manufacturing Document.
ManufacturingUserRepresentation object: Interface dedicated to objects representation management.
ManufacturingView object: The Manufacturing View is the object that holds all the manufacturing features of the model.
MappingFile property in object CDMASettingAtt: Retrieves or sets the mapping file.
MappingType property in object RenderingMaterial: Returns or sets the mapping type of a material.
Mapping_File_Save_Mode property in object MigrBatchSettingAtt: Retrieves or sets the state of the "Mapping Files Location for Saving" setting parameter.
Mapping_Saving_File property in object MigrBatchSettingAtt: Retrieves or sets the state of the "Specified Directory" setting parameter.
Marker2D object: Represents a marker 2D in a specified annotated view.
Marker2DAutoNaming property in object MarkerSettingAtt: Returns or sets the activation state for 2D annotations automatic naming (TRUE naming is automatic, FALSE the naming is not automatic).
Marker2DAutoNaming property in object N4DNavigatorSettingAtt
Marker2Ds object: A collection of Marker2Ds objects.
Marker2Ds property in object AnnotatedView: Returns the Marker2D Collection associated with the annotated view.
Marker3D object: Represents a marker 3D.
Marker3DAutoNaming property in object MarkerSettingAtt: Returns or sets the activation state for 3D annotations automatic naming (TRUE naming is automatic, FALSE the naming is not automatic).
Marker3DAutoNaming property in object N4DNavigatorSettingAtt
Marker3Ds object: A collection of Marker3D objects.
Marker3Ds property in object Clash: Returns the Marker3Ds collection of the clash.
Marker3Ds property in object Section: Returns the Marker3Ds collection of the section.
Marker3Ds property in object Distance: Returns the Marker3Ds collection of the distance.
Marker3Ds property in object NavigatorWorkbench: Returns the Marker3Ds collection.
MarkerAutoUpdate property in object N4DNavigatorSettingAtt: Returns or sets the activation of the automatic update on product structure modification (TRUE update is done automatically, FALSE update is done manually).
MarkerDefaultsDashed property in object MarkerSettingAtt: Returns or sets the default dashed value of an annotation (oValue the dashed value).
MarkerDefaultsDashed property in object N4DNavigatorSettingAtt
MarkerDefaultsFont property in object N4DNavigatorSettingAtt
MarkerDefaultsSize property in object N4DNavigatorSettingAtt
MarkerDefaultsWeight property in object MarkerSettingAtt: Returns or sets the default weight value of an annotation (oValue the weight value).
MarkerDefaultsWeight property in object N4DNavigatorSettingAtt
MarkerSettingAtt object: Interface to handle the Marker settings The different settings are: MarkerAutoUpdate Update on product structure modifications and scenes activation.
MarkerTextDashed property in object N4DNavigatorSettingAtt
MarkerTextDashed2D property in object MarkerSettingAtt: Returns or sets the default dashed value of a 2D text annotation (oValue the dashed value).
MarkerTextDashed3D property in object MarkerSettingAtt: Returns or sets the default dashed value of a 3D text annotation (oValue the dashed value).
MarkerTextDefaultsFont2D property in object MarkerSettingAtt: Returns or sets the default font of a 2D annotation (oValue the font name).
MarkerTextDefaultsFont3D property in object MarkerSettingAtt: Returns or sets the default font of a 3D annotation (oValue the font name).
MarkerTextDefaultsSize2D property in object MarkerSettingAtt: Returns or sets the default size value of a 2d annotation (oValue the size value).
MarkerTextDefaultsSize3D property in object MarkerSettingAtt: Returns or sets the default size value of a 3d annotation (oValue the size value).
MarkerTextWeight property in object N4DNavigatorSettingAtt
MarkerTextWeight2D property in object MarkerSettingAtt: Returns or sets the default weight value of a 2D text annotation (oValue the weight value).
MarkerTextWeight3D property in object MarkerSettingAtt: Returns or sets the default weight value of a 3D text annotation (oValue the weight value).
Mass property in object Inertia: Returns the mass.
Mass property in object Analyze: Returns the product mass value.
MassCost property in object CompositesMaterial: returns or set the cost per mess defined in Composites tab in $ per kg.
MassScalings property in object ABQInitialStep: Returns the ABQMassScalings container associated with the step.
Material object: Represents a Material object.
Material property in object StrObjectExt: Returns the material of the SR1 object.
Material property in object PositionedMaterial: Returns the material object from the current positioned material.
Material property in object SfmObject: Returns or sets the material.
Material property in object SfmObjectExt: Returns the material of the structural object.
MaterialCondition object: Interface for accessing Material Condition modifier on a TPS.
MaterialCondition method in object Annotation: Get the annotation on the MaterialCondition interface.
MaterialCondition method in object SemanticGDT: Role: Returns the MaterialCondition interface.
MaterialDocument object: Represents the Document object for materials.
MaterialESSObjectSettingAtt object: The interface to access a CATIAMaterialESSObjectSettingAtt.
MaterialFamilies object: A collection of all the MaterialFamily objects.
MaterialFamily object: Represents a Material Family object.
MaterialManager object: Interface to manage material manager object.
MaterialType property in object CompositesMaterial: returns or set the material type defined in Composites tab.
Materials object: A collection of all the Material objects.
Materials property in object MaterialFamily: Returns the material collection object from the current material family.
MaxAngle property in object FittingSettingAtt
MaxCopyFile property in object GlobalStatisticsSettingAtt: Returns or sets the maximum number of copy files.
MaxDampingChange property in object ABQIAABQSteadyStateLinDynStepSubspaceVB: Returns or sets Maximum Damping Change.
MaxDeformation property in object CompositesMaterial: returns or set the maximum deformation defined in Composites tab in radian.
MaxDisplayedResults property in object SearchSettingAtt: Returns or sets the Max Displayed Results attribute.
MaxEvalsNb property in object Optimization: Returns or sets the maximum number of model updates allowed during one run of the optimization.
MaxEvalsWoImprovement property in object Optimization: Returns or sets the maximum number of model updates without improvement of the problem solution during one run of the optimization.
MaxInc property in object ABQHeatTransferStep: ets or returns the maximum increment size if <tt>TimeIncrementationMethod=AUTO_INCREMENT</tt>.
MaxInc property in object ABQGeneralStaticStep: eturns or sets the maximum increment if the type of the incrementation is set to AUTO_INCREMENT.
MaxInitialPullForce property in object SWKErgoPushPull: This field is the maximum initial pulling force, produced by the study, given the current input guidelines.
MaxInitialPushForce property in object SWKErgoPushPull: This field is the maximum initial pushing force, produced by the study, given the current input guidelines.
MaxMean property in object SWKDOF: Returns the mean value of the upper limit of the DOF (in radians).
MaxMeanInterSegment property in object SWKDOF
MaxMemory property in object ABQJob
MaxNumInc property in object ABQHeatTransferStep: Sets or returns the maximum number of increments if <tt>TimeIncrementationMethod=AUTO_INCREMENT</tt>.
MaxNumInc property in object ABQGeneralStaticStep: eturns or sets the maximum number of increments if the type of the incremention is set to AUTO_INCREMENT.
MaxPercentCacheSize property in object CDMASettingAtt: Retrieves or sets the maximum percentage cache size before automatic cache cleaning.
MaxPreHighlightedElements property in object SearchSettingAtt: Returns or sets the Max Pre-Highlighted Elements attribute.
MaxScore property in object SWKDOF: Returns the highest score that this DOF can take.
MaxSelectionMove property in object VisualizationSettingAtt: Returns the MaxSelectionMove parameter.
MaxSizePerFile property in object GlobalStatisticsSettingAtt: Returns or sets the maximum size per file.
MaxStdDev property in object SWKDOF: Returns the standard deviation value of the upper limit of the DOF (in radians).
MaxStiffness property in object ABQMechConnBehavior: Sets or returns the contact stiffness type hard contact pressure overclosure.
MaxStiffnessChange property in object ABQIAABQSteadyStateLinDynStepSubspaceVB: Returns or sets Maximum Stiffness Change.
MaxStiffnessValue property in object ABQMechConnBehavior: Sets or returns the max stiffness value for mechanical connection.
MaxStiffness_Type enum: Max stiffness types.
MaxSustainedPullForce property in object SWKErgoPushPull: This field is the maximum sustained pulling force, produced by the study, given the current input guidelines.
MaxSustainedPushForce property in object SWKErgoPushPull: This field is the maximum sustained pushing force, produced by the study, given the current input guidelines.
MaxTime property in object Optimization: Returns or sets the maximum time allowed for one run of the optimization (in minutes).
MaxValue property in object SWKDOF: Returns or sets the highest value that a DOF can take.
MaxValue property in object SWKAnthroVariable: Returns the highest value that the variable can take.
MaxValueAsPercentile property in object SWKDOF: Returns or sets the highest value that a DOF can take.
MaximumDeviation property in object HybridShapeCurveSmooth: Returns the MaximumDeviation.
MaximumDeviationActivity property in object HybridShapeCurveSmooth: Returns or sets the MaximumDeviationActivity.
MaximumDeviationValue property in object HybridShapeFill: Sets or Gets the maximum deviation allowed for smoothing operation in fill commnd.
MaximumDeviationValue property in object HybridShapeProject: Sets or Gets the maximum deviation allowed for smoothing operation.
MaximumDeviationValue property in object HybridShapeCurvePar: Sets or Gets the maximum deviation allowed for smoothing operation.
MaximumDistance property in object Distance: Returns or sets the maximum distance value for the computation (valid only for band analysis).
MaximumFrequency property in object ABQFrequencyStep: Returns or sets maximum frequency value.
MaximumSize property in object PageSetup: Returns or sets whether the document or the image should be printed at the maximum size with respect to the page size and margins.
MaximumTimeIncrementLimit property in object ABQExplicitDynamicsStep: Sets or returns the maximum time increment limit.
MaximumTolerance property in object RealParam: Returns or sets the value of the maximum tolerance of a parameter.
MaximumWeight property in object SWKErgoCarry: This field is the maximum weight that can be carried force, given the current input guidelines.
Mean property in object SWKAnthroVariable: Returns the mean value os the variable.
Measurable object: The interface to access a CATIAMeasurable Get measurements on the object.
Measure property in object Export3DXmlSettingAtt
MeasureSettingAtt object: The interface to access a CATIAMeasureSettingAtt.
MeasureType property in object Distance: Returns or sets the type of distance that will be calculated.
MeasureUnitSymbol property in object HybridShapeLawDistProj: Returns or sets the measure unit symbol for heterogeneous law.
Mechanism object: Interface to access the Mechanism object.
Mechanism property in object Dressup: Returns the mechanism on which a dressup is applied.
MechanismCommand object: Interface to access the Command object (in Kinematics context).
MechanismCommands object: A collection of all MechanismCommand entities currently managed by the application.
MechanismIndex property in object MoveHomeAct: Sets and Retrieves mechanism index for the move activity.
MechanismIndex property in object MoveJointsAct: Sets and Retrieves mechanism index for the activity.
Mechanisms object: A collection of all Mechanism entities currently managed by the application.
Mechanisms property in object KinematicsWorkbench: Returns the Mechanisms collection.
MedianFeature object: Interface for accessing Median Feature modifier on a Semantic GDT (ISO Standard only).
MedianFeature method in object SemanticGDT: Role: Gets the GDT on the Median Feature interface.
MemUse property in object PCSStatisticsSettingAtt: Returns or sets the state ot the memory field.
MemberEndCut property in object EndCutESSObjectSettingAtt: Returns or sets the MemberEndCut parameter.
MemberMaterial property in object MaterialESSObjectSettingAtt: Returns or sets the MemberMaterial parameter.
MemberTypes property in object TypeESSObjectSettingAtt: Returns or sets the MemberTypes parameter.
Members property in object PspGroup: Returns a list of Members of the Group.
Memo property in object SWKBody: Returns or records miscellaneous user-added comments about the posture.
Memo property in object SWKManikinPart: Returns or records miscellaneous user-added information about the part.
MemoryStopperState property in object MemoryWarningSettingAtt: Returns or sets the activation state of the memory stopper mechanism.
MemoryUnit property in object ABQJob: Sets or returns the units to be used for specifying the maximum memory to be used by the solver.
MemoryUnit_Type enum
MemoryWarningSettingAtt object: Represents the base object to handle the parameters of memory warning mechanism.
MergeCells method in object DrawingTable: Merges a group of cells.
MergeEnd property in object Sweep: Returns the Sweep merge end flag (for thin Sweep only).
MergeEnd property in object Prism: Returns the prism merge end flag (for thin prism only).
MergeEnd property in object Revolution: Returns the Revol merge end flag (for thin Revol only).
MergeMode property in object Sweep: Returns or sets the end mode .
MergeShapeName method in object Merges: Returns the name of the associated shape.
Merges object
MergingDistance property in object HybridShapeHealing: Returns the Merging Distance of the healing.
MeshManager property in object AnalysisModel: Returns the MeshManager defined on the analysis model.
MfgActivities object: The collection of MfgActivities related to the Manufacturing Document .
MfgAssembly object: This Interface represents a Manufacturing Assembly.
MfgAssemblyFactory object: Represents the factory to creates a manufacturing assembly.
MfgCtxPrevProcRelationType property in object MfgHubSettingAtt
MfgHubSettingAtt object: Represents the Manufacturing Hub setting controller object.
MfgToolMotions object: The collection of MfgToolMotions related to the Manufacturing Document .
MigrBatchSettingAtt object: Represents the object to handle the setting parameters of the "Migration Batch" tab page.
Migration_Format property in object MigrBatchSettingAtt: Retrieves or sets the state of the "Format" setting parameter.
Migration_Interface property in object MigrBatchSettingAtt: Retrieves or sets the "Migration Interace" setting parameter.
Migration_Type property in object MigrBatchSettingAtt: Retrieves or sets the state of the "Conversion Mode" setting parameter.
MinInc property in object ABQHeatTransferStep: ets or returns the minimum increment size if <tt>TimeIncrementationMethod=AUTO_INCREMENT</tt>.
MinInc property in object ABQGeneralStaticStep: Returns or sets the minimum increment if the type of the incrementation is set to AUTO_INCREMENT.
MinMean property in object SWKDOF: Returns the mean value of the lower limit of the DOF (in radians).
MinMeanInterSegment property in object SWKDOF
MinStdDev property in object SWKDOF: Returns the standard deviation value of the lower limit of the DOF (in radians).
MinValue property in object SWKDOF: Returns or sets the lowest value that a DOF can take.
MinValue property in object SWKAnthroVariable: Returns the lowest value that the variable can take.
MinValueAsPercentile property in object SWKDOF: Returns or sets the lowest value that a DOF can take.
MinValueInterSegment property in object SWKDOF
MinimumDistance property in object Distance: Returns or sets the minimum distance value for the computation (valid only for band analysis).
MinimumFPSMode property in object VisualizationSettingAtt: Returns the MinimumFPSMode parameter.
MinimumFrequency property in object ABQFrequencyStep: Returns or sets minimum frequency value.
MinimumSpaceFPSMode property in object VisualizationSettingAtt: Returns the MinimumSpaceFPSMode parameter.
MinimumTolerance property in object RealParam: Returns or sets the value of the minimum tolerance of a parameter.
MinorRadius property in object Ellipse2D
Mirror object: Represents the mirror shape.
Mirror method in object Track: Produces a "mirror image" of the track.
Mirror property in object DrawingTextProperties: Returns or sets the mirroring of the drawing text.
MirrorCopyAngularLimitations method in object SWKSegment: Mirror copy the angular limitations of the segment.
MirrorCopyPosture method in object SWKSegment: Copy the posture on the equivalent segment, on the other side of the manikin.
MirrorCopyPosture method in object SWKSegmentNode: Copy the posture on the equivalent segment node, on the other side of the manikin.
MirrorCopyPrefAngles method in object SWKSegment: Mirror copy the preferred angles of the segment.
MirrorSegment property in object SWKSegment: This property returns the equivalent segment, but on the opposite side (ex.
MirroringObject property in object Mirror: Returns the mirroring Object.
MirroringPlane property in object Mirror: Returns or sets the mirroring reference plane.
Mode property in object Draft: Returns or sets the draft mode.
Mode property in object Chamfer: Returns or sets the chamfer definition mode.
Mode property in object AutoDraft: Returns or sets the draft mode.
Mode property in object HybridShapeTrim: Gets or sets Trim mode.
Mode property in object Constraint: Returns or sets the constraint driving mode.
Mode property in object HybridShapeDevelop: Returns or sets the developing mode.
Mode property in object RenderingLight: Returns or sets the light mode.
Mode property in object HybridShapeSweepLine: Returns or sets the linear sweep mode.
Mode property in object HybridShapeSweepCircle: Returns or sets the circular sweep mode.
Mode property in object HybridShapeSweepExplicit: Returns or sets positioning mode used for the profile.
Mode property in object HybridShapePositionTransfo: Returns or sets the positioning mode.
ModeCreateDisplay property in object V4WritingSettingAtt: Returns or sets the curves associated to faces'boundaries creation option.
ModeErrorDisplay property in object V4WritingSettingAtt: Returns or sets the error feature creation option.
ModeImageTextSize property in object AnalysisPostProSettingAtt: Returns or sets the ModeImageTextSize parameter.
ModePos property in object HybridShapeDevelop: Returns or sets the positioning mode used for the 2D wire.
ModelConsistencyCheck property in object ABQJob: Sets or returns whether a model consistency check should be performed.
ModelPrint property in object ABQJob: Sets or returns or sets whether model definition data is printed.
Model_Dimension property in object V4WritingSettingAtt: Returns or sets the model dimension.
Model_Factor property in object V4WritingSettingAtt: Returns or sets the model factor.
Model_File_Name property in object V4WritingSettingAtt: Returns or sets the model file name in capital letters option.
Model_Unit property in object V4WritingSettingAtt: Returns or sets the model unit.
Modifier property in object FreeState: Retrieves Free State modifier.
Modifier property in object TangentPlane: Retrieves Tangent Plane modifier.
Modifier property in object MedianFeature: Retrieves Median Feature modifier display.
Modifier property in object DimensionLimit: Returns or sets the dimension single limit modifier.
Modifier property in object ControledRadius: Retrieves Controled Radius modifier.
Modifier property in object EnvelopCondition: Retrieves Envelop Condition modifier.
Modifier property in object MaterialCondition: Retrieves Material Condition modifier.
Modifier property in object SemanticGDTCommonZone: Retrieves CZ modifier display.
Modify method in object Relation: Modifies the relation.
ModifyGuideCurve method in object HybridShapeLoft: Modifies the curve of a guide from the lofted surface.
ModifyGuideCurve method in object HybridShapeSpine: Modifies a guide from the spine curve.
ModifyPoint method in object DrawingArrow: Modify a point of an Arrow.
ModifyPoint method in object DrawingLeader: Modify a point of an leader.
ModifyPrinterArrayForGroup method in object PrintersSettingAtt: Modify a printer group: redefine the array of printers included in this group.
ModifyPrinterDirectoryState method in object PrintersSettingAtt: Modify a printer file directory state.
ModifySectionCurve method in object HybridShapeLoft: Modifies the curve of section from the lofted surface.
ModifySectionCurve method in object HybridShapeSpine: Modifies a section or a plane from the spine curve.
ModifySectionOrient method in object HybridShapeLoft: Modifies the orientation of the curve of a section from the lofted surface.
ModifySplittingElement method in object AssemblySplit: Replaces the splitting element by a new one.
ModifyURL method in object Noa: Modifies an URL.
ModifyURL method in object FlagNote: Modifies an URL.
ModifyVisu method in object Annotation: To refresh the 3D visualization.
ModifyVisu method in object Annotation2: To refresh the 3D visualization.
MoldedSurface property in object SfmOpening: Returns or Sets the Molded Surface for the Opening.
MoldedSurface property in object SfmSuperPlate: Returns the molded surface.
MonoDimFeatEdge object: 1-D boundary belonging to a feature whose topological result is one dimensional.
MonocularAngle property in object SWKVision: Returns or sets the vision Monocular angle.
MotionBasis enum: Types of motion for the motion profile in robot controller.
MotionBasis property in object WalkActivity
MotionBasis property in object HumanActivityGroup
MotionBasis property in object MoveHomeAct
MotionBasis property in object MoveToPostureActivity
MotionBasis property in object MoveJointsAct
MountActivity object: Interface representing a Mount Activity.
MountDevice method in object MountManager
MountManager object: Represents the Mount Manger of a Robot.
MouseDoubleClicDelay property in object VisualizationSettingAtt: Returns the MouseDoubleClicDelay parameter.
MouseSpeedValue property in object VisualizationSettingAtt: Returns the MouseSpeedValue parameter.
MovableObject property in object Move: Returns the movable object associated with the used object.
Move object: Represents an object associated with any kind of objects which retrieves the corresponding movable object.
Move property in object Solid: Returns the move object of the solid.
Move method in object Track: Moves the track a certain position.
Move property in object Shuttle: Returns the shuttle's move object.
Move property in object SceneProductData: Returns the scene product's move object.
Move method in object DrawingTable: Moves the table relatively to its original position.
Move property in object Product: Returns the product's move object.
Move property in object SWKManikin: Returns the manikin's move object.
MoveActionActivity object: Interface representing a Move Activity inside a generic Action (Close Gun/Open Gun etc).
MoveActivity property in object WorkGeneralSettingAtt: Returns or sets the MoveActivity parameter.
MoveAfterCreation property in object FTAInfraSettingAtt: Returns or sets the Move After Creation setting parameter value.
MoveHomeAct object: Interface representing a MoveHomeAct.
MoveJointsAct object: Interface representing a MoveJointsAct.
MoveMode property in object Track: Returns or sets the track's movement mode.
MoveMode property in object Shuttle: Returns/Stores the shuttle move mode.
MoveOperation method in object ManufacturingProgram: Move an existing Manufacturing Operation to a Manufacturing Program.
MoveProfileToPath property in object Sweep: Returns the Sweep MoveProfileToPath flag (for Sweep Move Profile only).
MoveToCenterOfMass property in object ABQRigidBodyConstraint: Sets or returns the move to center of mass flag.
MoveToPostureActivity object: The object that represents an MoveToPosture(MTP) Activity.
MoveValue method in object Dimension3D: Moves the dimension value at a given point.
MoveValue method in object DrawingDimension: Move dimension value.
MoveWithFixTExtendMode property in object AsmGeneralSettingAtt: Returns or sets the setting parameter managing the extension of a move to the components involved in a FixTogether.
MultiCADSettingAtt object
MultipleSolution property in object HybridShapeNear: Role: To get_MultipleSolution on the object.
MultiselectionMode property in object DraftDomain: Changes the multiselection mode.
Mxdem property in object ABQHeatTransferStep: ets or returns the maximum allowable emissivity change with temperature and field variables during an increment.