IDL API Master Index

L

LAYER property in object PCBArea
LODMode property in object CacheSettingAtt: Returns or sets the LOD generation mode parameter.
Label property in object DatumSimple: Retrieves or sets Label.
Label property in object DatumTarget: Retrieves Label.
Label property in object NonSemanticDatum: Retrieves or sets Label.
Language property in object ExpertRule: Returns or sets the language of a rule.
Language property in object ExpertCheck: Returns or sets the language of a check.
LanguageSheetSettingAtt object: The interface to access a CATIALanguageSheetSettingAtt.
LastAct property in object HtsCCPSettingAtt: Returns or sets the LastAct parameter.
LastCurvesConstraint property in object HybridShapeWrapCurve: Returns or sets constraint at last curves of the WrapCurve.
LateralFaceElement property in object Thread: Returns or sets the lateral face (must be cylindrical) .
Law object: Represents the Law object.
LawType property in object HybridShapeCurvePar: Returns or sets the law type.
Layer_for_No_Asso property in object V4WritingSettingAtt: Returns or sets the layer for not associative data.
Layout property in object SpecsViewer: Returns or sets the specification tree layout.
Layout property in object SpecsAndGeomWindow: Returns or sets the specification and geometry window layout.
Layout2DFactory object
Layout2DRoot object: Interface to manage the 2D Layout root.
Layout2DSettingAtt object: The interface to access a CATIA2DLSettingAtt.
Layout2DSheet object: The interface to access a Layout2D Sheet.
Layout2DSheets object: A collection of all the Layout sheets 2DL currently managed by the LayoutRoot.
Layout2DView object: The interface to access a Layout2D View.
Layout2DViews object
LayoutDefaultRenderStyle property in object Layout2DSettingAtt: Returns the default render style attribute value to apply to a Layout at its creation parameter.
LeaderAssociativity property in object FTAInfraSettingAtt: Returns or sets the Leader Associativity setting parameter value.
Leaders property in object DrawingGDT: Returns the drawing leader collection of the drawing GDT.
Leaders property in object DrawingText: Returns the drawing leader collection of the drawing text.
Leaders property in object DrawingTable: Returns the drawing leader collection of the drawing table.
Leaders property in object DrawingLeader: Returns the secondary drawing leader collection of the drawing leader.
Leaders property in object DrawingWelding: Returns the drawing leader collection of the drawing welding.
LeafProduct property in object SelectedElement: Returns the leaf product corresponding to the selection in the specification tree.
Left property in object Window: Returns or sets the distance of the window with respect to the inner left side of the frame.
Left property in object PageSetup: Returns or sets the lower left corner location with respect to the left of the sheet of paper.
Left property in object Application: Returns or sets the distance from the application's frame window left side to the left side of the screen.
LeftMargin property in object PageSetup: Returns or sets the left margin.
Length object: Represents the length parameter.
Length property in object HybridShapeExtrapol: This method is left available for compatibility reasons but it is preferable to use the GetLength method instead.
Length property in object DrawingTextRange: Returns the number of characters of the drawing text range.
Length property in object Measurable: Returns the Length of a curve.
Length property in object RenderingEnvironment: Returns or sets the cubic environment length value.
Length property in object ProjectedToleranceZone: Retrieves length of the projected tolerance zone (in millimeters).
Length property in object SWKSegment: Returns the length of the segment, in centimeters.
Length property in object ArrangementRun: Returns the length of the ArrangementRun object.
Length property in object SWKLineOfSight: Returns the length of the line of sight, in centimeters.
Length property in object ArrangementPathway: Returns the length of the ArrangementPathway object.
Length property in object ArrangementBoundary: Returns the length of the ArrangementBoundary object.
Length property in object SfmMemberPointLength: Returns or sets the member's length.
Length1 property in object Chamfer: Returns the chamfer first length.
Length1 property in object HybridShapeCylinder: Returns or sets the length of the cylinder object in the given extrusion direction.
Length2 property in object Chamfer: Returns the chamfer second length.
Length2 property in object HybridShapeCylinder: Returns or sets the length of the cylinder object in the opposite direction of given extrusion direction.
LengthMaxTolerance property in object ToleranceSheetSettingAtt: Returns or sets the LengthMaxTolerance parameter.
LengthMinTolerance property in object ToleranceSheetSettingAtt: Returns or sets the LengthMinTolerance parameter.
LengthNumber property in object ManufacturingToolCorrector: Gives the corrector length number.
LengthParam property in object SfmMemberPointLength
LibTabSettingAtt object
LicenseSettingAtt object: Interface to handle the licensing settings.
LifeCycleCheckIn method in object StiEngine: Checks the CATIAStiDBItem Into SmarTeam Check-In Vault.
LifeCycleCheckOut method in object StiEngine: Checks Out Without Propagation the CATIAStiDBItem in SmarTeam.
LifeCycleCheckOutPropagated method in object StiEngine: Checks Out With Propagation the CATIAStiDBItem in SMARTEAM.
LifeCycleNewRelease method in object StiEngine: Enables a New Release Without Propagation for the CATIAStiDBItem in SmarTeam.
LifeCycleNewReleasePropagated method in object StiEngine: Enables a NewRelease action With Propagation for the CATIAStiDBItem in SmarTeam.
LifeCycleRelease method in object StiEngine: Releases the CATIAStiDBItem in SmarTeam Release Vault.
LifeCycleUndoCheckOut method in object StiEngine: Cancels Check-Out operation on the CATIAStiDBItem in SmarTeam.
LiftLower property in object SWKErgo: Returns the object for a lift/lower analysis.
LightAreaType property in object RenderingLight: Returns or sets the light area type.
LightSource object: Represents the light source.
LightSources object: A collection of all the LightSource objects.
LightSources property in object Viewer3D: Returns the viewer's light source collection.
LightViewerMode property in object VisualizationSettingAtt: Returns the LightViewerMode parameter.
LightingIntensity property in object Viewer3D: Returns or sets the lighting intensity.
LightingMode property in object Viewer3D: Returns or sets the lighting mode.
Limit object: Represents the limit of a prism or a hole shape.
Limit property in object SfmMemberPointUpToLimit: Returns or sets the limit.
LimitBound property in object SWKAnthro: Returns or sets the population accommodation, in terms of a limit bound.
LimitBoundingBox property in object DrawingViewGenerativeBehavior: Returns or sets the bounding box limits under which a part.
LimitCurve property in object HybridShapeBump: Returns or sets the limit curve.
LimitDeformation property in object CompositesMaterial: returns or set the limit deformation defined in Composites tab in radian.
LimitFaceElement property in object Thread: Returns or sets the limit face (must be planar ) .
LimitMode property in object Limit: Returns or sets the limit mode.
LimitMode property in object SfmSuperPlate: Returns or sets the SuperPlate's limit mode.
LimitOrientations method in object SfmSuperPlate: Returns the orientation of the limits.
LimitType property in object HybridShapeExtrapol: This method is left available for compatibility reasons but it is preferable to use the GetLimitType method instead.
Limitation property in object HybridShapeSphere: Returns whether the sphere is created as a whole sphere or not.
LimitingElement property in object Limit: Returns or sets the limiting element.
Limits method in object DimensionLimit: Retrieves dimension limit values.
Limits method in object SfmSuperPlate: Returns the limits.
LimitsLocked property in object SWKDOF: Sets a lock on the limits.
LinAccelColor property in object RobAnalysisSettingAtt: Returns or sets the LinAccelColor parameter.
LinAccelLimit property in object RobAnalysisSettingAtt: Returns or sets the LinAccelLimit parameter.
LinSpeedColor property in object RobAnalysisSettingAtt: Returns or sets the LinSpeedColor parameter.
LinSpeedLimit property in object RobAnalysisSettingAtt: Returns or sets the LinSpeedLimit parameter.
Line object: Represents the hybrid shape Line feature object.
Line property in object HybridShapePlane1Line1Pt: Returns or sets the passing line.
Line2D object: Class defining a line in 2D Space.
LineCap property in object PageSetup: Returns or sets Line cap for print.
LineOfSightDisplayed property in object SWKBody: Returns or sets the display of the active line of sight.
LineOfSightNode property in object SWKManikin: Returns the Line of sight node of the current manikin.
LineTypeOverlappingCheck property in object PageSetup: Returns or sets text Line type overlap check option for print.
LineTypeSpecification property in object PageSetup: Returns or sets Line type specification for print.
LineWidth property in object MeasureSettingAtt: Returns or sets the LineWidth parameter.
LineWidthSpecification property in object PageSetup: Returns or sets Line width specification for print.
LinearRepartition object: Represents the linear repartition.
LineicCgrMode property in object VisualizationSettingAtt: Returns the LineicCgrMode parameter.
Link method in object SchCntrDocLink: Create an external link to another connector.
LinkMode property in object MultiCADSettingAtt
LinkSendMode property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LinkSendMode attribute.
LinkTo method in object FunctAssociation: Create a link to another object.
LinkType method in object StiDBChildren: Returns the Link Type from its index in the CATIAStiDBChildren.
LinkWiGeomType property in object DefaultAnnotation: Get the type of link between the default annotation and the geometry.
LinkedCount property in object FunctAssociation: Get count of linked objects.
LinkedDocuments property in object AnalysisManager: Returns the collection containing the documents linked to analysis document.
LinkedExternalReferences property in object PartInfrastructureSettingAtt: Returns or sets the "LinkedExternalReferences" parameter.
LinkedExternalReferencesOnlyOnPublication property in object PartInfrastructureSettingAtt: Returns or sets the "LinkedExternalReferencesOnlyOnPublication" parameter.
LinkedExternalReferencesWarningAtCreation property in object PartInfrastructureSettingAtt: Returns or sets the "LinkedExternalReferencesWarningAtCreation" parameter.
LinkedScaleStatus property in object RenderingEnvironmentWall: Returns or sets the texture scaling link status.
List object: Represents a CATIAList.
List3DStatesInActivity method in object DNB3DStateManagement: Returns the list of 3D states assigned to the given activity, based on the condition on which the activity has been assigned to the 3D state.
ListAffectedComponents method in object AssemblyFeature: Retrieves the affected component list.
ListAll3DStates method in object DNB3DStateManagement
ListAll3DStatesOnObject method in object DNB3DStateManagement: Returns the list of all 3D State objects on a given object(Resource/MA/Product.
ListAlternateGraphics method in object SchRouteAlternateGraphic: Lists the alternate graphics of a route.
ListAttached method in object Dressup: Returns the list of products attached to a given link.
ListAttributes method in object PspAttribute: Retrieves a list of Attributes of an object in the the input domain ID.
ListBendData method in object PspStretchableData: Returns the bend radii.
ListBoundaryElements method in object SchGRRZone: List all boundary elements of this zone graphical representation.
ListCompartments method in object PspAppFactory: Retrieves a list of Compartments in the current Product.
ListCompatiblePartNumbers method in object PspFunctional: Retrieves a list of compatible Part numbers and part types.
ListConnectables method in object PspConnectable: Retrieve a list of connectors of the object.
ListConnectedGRRs method in object SchGRR: Get a list of graphical objects that connects to this graphic representation.
ListConnectors method in object SchConnectable: Find all the connectors of this schematic object on a specific graphical image.
ListDefinitionPoints method in object PspStretchableData: Returns the points defining the object.
ListDesignGeometries method in object ManufacturingSetup: Retrieves the design geometries list from a Manufacturing Setup.
ListDesignGeometriesProducts method in object ManufacturingSetup: Retrieves the design geometries products list from a Manufacturing Setup.
ListDoubleDiscreteValues method in object PspAttribute: Retrieves double discrete values for the input attribute.
ListDropOffViews method in object SchDropOffView: Lists drafting views in this schematics diagram.
ListEncodedDecodedDiscreteValues method in object PspAttribute: Retrieves Encoded-decoded discrete values for the input attribute.
ListExtremityObjects method in object SchNetworkAnalysis: List the extremity objects of the network.
ListFailedElements method in object KWECorrectFunction: Returns the list of elements of current tuple failed.
ListFixtureGeometries method in object ManufacturingSetup: Retrieves the fixture geometries list from a Manufacturing Setup.
ListFixtureGeometriesProducts method in object ManufacturingSetup: Retrieves the Fixture geometries products list from a Manufacturing Setup.
ListGRRZoneOwners method in object SchBoundaryElem: Get the list of owners of this zone.
ListGraphicalImages method in object SchCompGraphic: List all graphical images (instances of the rep) of a component.
ListGraphicalPrimitives method in object SchCntrGraphic: List all graphical primitives of a connector.
ListGraphicalPrimitives method in object SchRouteGraphic: List all graphical primitives of a route.
ListGraphicalRepresentations method in object SchCompGraphic: List all graphical representation of a component.
ListGraphicalRepresentations method in object SchZoneGraphic: List all graphical representations of a zone.
ListGroups method in object PspAppFactory: Retrieve a list of Groups in the current Product.
ListInProcessModelBodies method in object ManufacturingSetup: Retrieves the In Process Model Bodies list from a Manufacturing Setup.
ListIntegerDiscreteValues method in object PspAttribute: Retrieve integer (long) discrete values for the input attribute.
ListInternalFlows method in object SchCompFlow: List all internal flow objects of a component.
ListLogicalLines method in object PspAppFactory: Returns a list of logical lines in the current Product.
ListMachinableGeometry method in object ManufacturingMachinableArea: Retrieves the machinable geometry list.
ListManufacturingActivityConnected method in object ManufacturingMachinableArea: Retrieves the manufacturing activity connected list.
ListMechanismsContext method in object Dressups: Each mechanism of the list given by ListPossibleMechanisms has a context product on which it is defined.
ListMembers method in object SchComponentGroup: List all connectable members in the group.
ListNetworkObjects method in object SchNetworkAnalysis: List the connected objects in the network.
ListOfMagnitudes property in object UnitsSheetSettingAtt: Returns or sets the ListOfMagnitudes parameter.
ListOfMagnitudesSize property in object UnitsSheetSettingAtt: Returns or sets the ListOfMagnitudesSize parameter.
ListOfPackagesToLoad property in object LanguageSheetSettingAtt: Returns or sets the ListOfPackagesToLoad parameter.
ListParameter object: Represents a CATIAListParameter.
ListPartParametricAttributes method in object PspBuildPart: Returns the part parametric attribute names.
ListPhysicals method in object PspAppFactory: Returns a list of Physical objects in the node.
ListPointedGeometry method in object ManufacturingMachinableGeometry: Retrieves a pointed geometry and its product.
ListPossibleMechanisms method in object Dressups: Returns information about all possible mechanisms on which a dressup can be created.
ListRouteSymbols method in object SchGRRRoute: List route symbols on the route.
ListSchConnectors method in object SchInternalFlow: List all schematic connectors associated with an internal flow.
ListShapesOfPointedGeometry method in object ManufacturingMachinableGeometry: Retrieves the pointed shape list.
ListStockGeometries method in object ManufacturingSetup: Retrieves the stock geometries list from a Manufacturing Setup.
ListStockGeometriesProducts method in object ManufacturingSetup: Retrieves the Stock geometries products list from a Manufacturing Setup.
ListStringDiscreteValues method in object PspAttribute: RetrievesString discrete values for the input attribute.
ListZones method in object SchAppGroup: List application zone objects.
Load3dStateAndPos property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the Load3dStateAndPos parameter.
LoadAllChildProcMfgCtx property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadAllChildProcMfgCtx parameter.
LoadAllPackages property in object LanguageSheetSettingAtt: Returns or sets the LoadAllPackages parameter.
LoadAllVPMProperties property in object CDMASettingAtt: Retrieves or sets the Load Of All VPM Properties status.
LoadAnnotationSetsList method in object AnnotationSets: Loads the Annotation Sets list.
LoadAnnotationSetsList method in object AssemblyAnnotationSets: Loads the Annotation Sets list.
LoadAssocPrdResChild property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadAssocPrdResChild parameter.
LoadChildProcMfgCtx property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadChildProcMfgCtx parameter.
LoadCtxWithFileGeometry property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadCtxWithFileGeometry parameter.
LoadDispMfgCtx property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadDispMfgCtx parameter.
LoadDuplicatesInContextTreeChkB property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadDuplicatesChkB attribute.
LoadENVGeomFromENVdb property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadENVGeomFromENVdb parameter.
LoadExtendedLanguageLib property in object LanguageSheetSettingAtt: Returns or sets the LoadExtendedLanguageLib parameter.
LoadFeedProcMfgCtx property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadFeedProcMfgCtx parameter.
LoadFromPPRHub method in object MHIOpenAccess
LoadMfgAssmbly property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadMfgAssmbly parameter.
LoadMfgKits property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadMfgKits parameter.
LoadPSSData property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadPSSData attribute.
LoadPrdResUserAttribs property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadPrdResUserAttribs parameter.
LoadResGeo property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadResGeo parameter.
LoadScriptFromFilePath method in object FeatureGenerator: Sets a script from a document file.
LoadType property in object ABQConcentratedForce: ets or returns the load type whether Point Load, Distributed Load or Load Density.
LoadUnconstrainedMfgCtx property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LoadUnconstrainedMfgCtx parameter.
Loads property in object ABQFrequencyStep: Returns the ABQLoads container associated with the step.
Loads property in object ABQHeatTransferStep: Returns the ABQLoads container associated with the step.
Loads property in object ABQGeneralStaticStep: Returns the ABQLoads container associated with the step.
Loads property in object ABQExplicitDynamicsStep: Returns the ABQLoads container associated with the step.
Loads property in object ABQIAABQSteadyStateLinDynStepBasicVB: Returns the ABQLoads container associated with the step.
LocalCache property in object Application: Returns or sets the default local cache path used by the application.
LocalPath property in object CacheSettingAtt: Retrieves or sets the cache local path.
LockActivitesWithinProgram method in object ManufacturingProgram
LockActivty method in object ManufacturingOperation
LockAssignedPrdOnLoad property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the LockAssignedPrdOnLoad parameter.
LockPosture method in object SWKBody
LockPosture method in object SWKSegment: Lock the posture of the segment.
LockPosture method in object SWKLineOfSightNode: Lock the posture of the line of sight for the dof piDOFId.
LockStatus property in object DrawingView: Returns or sets the lock status of a drawing view.
LockStatus property in object Layout2DView: Returns or sets the lock status of a Layout2D view.
LockUserDefault property in object DraftingSettingAtt: Returns the LockUserDefault parameter.
Loft object: Loft feature.
LogicalActFilter property in object TreeTabSettingAtt
LogicalDataAttrList property in object PlugMapViewSettingAtt: Returns or sets the LogicalDataAttrList parameter.
Logo property in object PageSetup: Returns or sets the file containing the logo image.
LogoVisibility property in object PageSetup: Returns or sets LogoVisibility option for print.
LookAt method in object SWKVision: Make the manikin look at the specified position in space.
LookAtPoint method in object SWKVision: Make the manikin look at the specified position in space.
Loop object: The interface to access a CATIALoop.
LowLabel property in object NonSemanticDatumTarget: Retrieves or sets Lower Label.
LowerLimit1 property in object Joint: Gets or returns the lower limit of the joint, for the first parameter.
LowerLimit2 property in object Joint: Gets or returns the lower limit of the joint, for the second parameter.
localCsys property in object ABQGravity: ets or returns the local coordinate system of the gravity load.
localCsys property in object ABQRigidCoupling: Sets or returns the local coordinate system.
localCsys property in object ABQDisplacementBC: ets or returns the local coordinate system of the boundary condition's degrees of freedom.
localCsys property in object ABQSmoothCoupling: Returns or sets the local coordinate system.
localCsys property in object ABQConcentratedForce: ets or returns the local coordinate system of the concentrated force.