HybridShapeCircleTritangent (Object)

Properties

Property BeginOfCircle() As

Return or Set the number of the beginning curve of the circle. This parameter is used to stabilize the resulting circle

Example:

 This example set the beginning wire index of
 the hybShpcircle hybrid shape circle 
 
 hybShpcircle.BeginOfCircle = 1
 

Property Curve1() As

Returns or sets the first curve to which the circle is or will be tangent.
Sub-element(s) supported (see object): or .

Example:

This example retrieves in HybShpCircleFirstCurve the first curve to which the HybShpCircle hybrid shape circle is tangent.

 Dim HybShpCircleFirstCurve As Reference 
 HybShpCircleFirstCurve = HybShpCircle.Curve1
 

Property Curve2() As

Returns or sets the second curve to which the circle is or will be tangent.
Sub-element(s) supported (see object): or .

Example:

This example sets the second curve to which the HybShpCircle hybrid shape circle will be tangent to Crv5.

 HybShpCircle.Curve2 Crv5
 

Property Curve3() As

Returns or sets the thirs curve to which the circle is or will be tangent.
Sub-element(s) supported (see object): or .

Example:

This example retrieves in HybShpCircleThirsCurve the third curve to which the HybShpCircle hybrid shape circle is tangent.

 Dim HybShpCircleThirdCurve As Reference 
 HybShpCircleThirdCurve = HybShpCircle.Curve3
 

Property DiscriminationIndex() As

Return or set the discrimination index of the current circle. Several resulting solutions produced by the operator can be same oriented regarding to the input wire bodies. In such a case, they are sorted in order to distinguish them. The Sequence FirstOrientation - SecondOrientation - DiscriminationIndex allows you to identifie a unique one-domain solution.

Example:

 This example set the discrimination index of
 the hybShpcircle hybrid shape circle 
 
 hybShpcircle.DiscriminationIndex = 2
 

Property Orientation1() As

Returns or sets the orientation of the first curve to which the circle is tangent.
Role: The orientation of the first curve determines the side of this curve taken into account to find the point where the circle is tangent to the curve. This side is determined by the cross product of the normal to the support and a tangent to the curve oriented using the curve orientation.
Legal values: 1 to state that the side of the curve to be taken into account is the side shown by the vector resulting from this cross product, and -1 otherwise.

Example:

This example sets the orientation of the first curve to which the HybShpCircle hybrid shape circle is tangent to reverse.

 HybShpCircle.Orientation1 -1
 

Property Orientation2() As

Returns or sets the orientation of the second curve to which the circle is tangent.
Role: The orientation of the second curve determines the side of this curve taken into account to find the point where the circle is tangent to the curve. This side is determined by the cross product of the normal to the support and a tangent to the curve oriented using the curve orientation.
Legal values: 1 to state that the side of the curve to be taken into account is the side shown by the vector resulting from this cross product, and -1 otherwise.

Example:

This example retrieves in HybShpCircleOrientation the orientation of the second curve to which the HybShpCircle hybrid shape circle is tangent.

 HybShpCircleOrientation = HybShpCircle.Orientation2
 

Property Orientation3() As

Returns or sets the orientation of the third curve to which the circle is tangent.
Role: The orientation of the third curve determines the side of this curve taken into account to find the point where the circle is tangent to the curve. This side is determined by the cross product of the normal to the support and a tangent to the curve oriented using the curve orientation.
Legal values: 1 to state that the side of the curve to be taken into account is the side shown by the vector resulting from this cross product, and -1 otherwise.

Example:

This example sets the orientation of the third curve to which the HybShpCircle hybrid shape circle is tangent to reverse.

 HybShpCircle.Orientation3 -1
 

Property Support() As

Returns or sets the circle support surface.
Sub-element(s) supported (see object): .

Example:

This example retrieves in HybShpCircleSupportSurf the support surface of the HybShpCircle hybrid shape circle.

 Dim HybShpCircleSupportSurf As Reference 
 HybShpCircleSupportSurf = HybShpCircle.Support
 

Property TangentOrientation1() As

Returns or sets the tangent orientation of the circle first reference element. compared to the circle itself

Example:

 This example retrieves the tangent orientation of first reference element of
 the hybShpcircle hybrid shape circle in firstOrient.
 
 Dim firstOrient As long
 firstOrient = hybShpcircle.FirstTangentOrientation
 

Property TangentOrientation2() As

Returns or sets the tangent orientation of the circle second reference element. compared to the corner itself

Example:

 This example retrieves the tangent orientation of second reference element of
 the hybShpcircle hybrid shape circle in secondOrient.
 
 Dim secondOrient As long
 secondOrient = hybShpcircle.SecondTangentOrientation
 

Property TangentOrientation3() As

Returns or sets the tangent orientation of the circle third reference element. compared to the corner itself

Example:

 This example retrieves the tangent orientation of third reference element of
 the hybShpcircle hybrid shape circle in thirdOrient.
 
 Dim thirdOrient As long
 thirdOrient = hybShpcircle.ThirdTangentOrientation
 

Property TrimMode() As

Returns or sets whether the circle reference curves are or should be trimmed.
Legal values: 0 if the circle reference curves are not or should not be trimmed, 1 if the circle reference curves are or should be trimmed, 2 if only the first circle reference curve is or should be trimmed, 3 if only the second circle reference curve is or should be trimmed,

Example:

 This example sets that the reference curves of
 the hybShpCircle hybrid shape circle should be trimmed.
 
 hybShpCircle.TrimMode = 1