IDL API Master Index

R

RCSDataLibDir property in object RRSSettingAtt: Gets value of "RCSDATA$LIB" parameter.
RESISTANCE property in object PCBComponent: Allow to get and set the RESISTANCE of a component.
RRS2ConnectDownloaders property in object RRSSettingAtt: Gets value of "RRS2ConnectDownloaders" parameter.
RRS2ConsistencyCmdDownloaders property in object RRSSettingAtt: Gets value of "RRS2ConsistencyCmdDownloaders" parameter.
RRS2ControllerIdentifiers property in object RRSSettingAtt: Gets value of "RRS2ControllerIdentifiers" parameter.
RRS2DeleteAutoDownloadFilesAfterXfer property in object RRSSettingAtt: Gets value of "RRS2DeleteAutoDownloadFilesAfterXfer" parameter.
RRS2DfltControllerIdentifier property in object RRSSettingAtt: Gets value of "RRS2DfltControllerIdentifier" parameter.
RRS2DownloadDuringConnect property in object RRSSettingAtt: Gets value of "RRS2DownloadDuringConnect" parameter.
RRS2DownloadDuringSimRun property in object RRSSettingAtt: Gets value of "RRS2DownloadDuringSimRun" parameter.
RRS2DownloadInPartCoordinates property in object RRSSettingAtt: Gets value of "RRS2DownloadInPartCoordinates" parameter.
RRS2DownloadLogFileName property in object RRSSettingAtt: Gets value of "RRS2DownloadLogFileName" parameter.
RRS2FreePlaySimStepSize property in object RRSSettingAtt: Gets value of "RRS2FreePlaySimStepSize" parameter.
RRS2MainTaskProcessing property in object RRSSettingAtt: Gets value of "RRS2MainTaskProcessing" parameter.
RRS2MotionPlannerActiveDuringTeachOLP property in object RRSSettingAtt: Gets value of "RRS2MotionPlannerActiveDuringTeachOLP" parameter.
RRS2SimRunDownloaders property in object RRSSettingAtt: Gets value of "RRS2SimRunDownloaders" parameter.
RRS2StopVRCWhenSimStops property in object RRSSettingAtt: Gets value of "RRS2StopVRCWhenSimStops" parameter.
RRS2UpdateProgramOnDownload property in object RRSSettingAtt: Gets value of "RRS2UpdateProgramOnDownload" parameter.
RRS2UseVRCInverseKinematics property in object RRSSettingAtt: Gets value of "RRS2UseVRCInverseKinematics" parameter.
RRS2UseVRCTurnLimits property in object RRSSettingAtt: Gets value of "RRS2UseVRCTurnLimits" parameter.
RRSLibDir property in object RRSSettingAtt: Gets value of "RRS$LIB" parameter.
RRSServerFile property in object RRSSettingAtt: Gets value of "RRS Servers File" parameter.
RRSSettingAtt object: Interface to handle parameters of IGRIP RRS Tools Options Tab page Role: This interface is implemented by a component which represents the controller of IGRIP RRS Tools Options parameter settings.
RTIM property in object GeneralStatisticsSettingAtt: Returns or sets the state ot the response time field.
RULA property in object SWKErgo: Returns the object for a RULA analysis.
RadialAlignment property in object CircPattern: Returns or sets whether the copied shapes should be rotated or radial aligned with respect to the original one.
RadialDirectionRow property in object CircPattern: Returns the position of the shape to be copied along the radial direction.
RadialRepartition property in object CircPattern: Returns the radial repartition.
Radius property in object FaceFillet: Returns the face fillet radius.
Radius property in object Circle2D
Radius property in object HybridShapeSphere: Role: Get sphere radius.
Radius property in object HybridShapeCorner: Returns the corner radius.
Radius property in object Hyperbola2D
Radius property in object HybridShapeCylinder: Returns or sets the radius of the cylinder object.
Radius property in object ConstRadEdgeFillet: Returns the edge fillet constant radius.
Radius property in object HybridShapeCircleCtrRad: Returns the circle radius.
Radius property in object Measurable: Returns the radius of an arc, cylinder or sphere.
Radius property in object RenderingEnvironment: Returns or sets the spherical or cylindrical environment radius value.
Radius property in object HybridShapeExtremumPolar: returns the resulting radius of extremum.
Radius property in object HybridShapeFilletBiTangent: Returns fillet radius in a CATIALength.
Radius property in object HybridShapeCircle2PointsRad: Returns the circle radius.
Radius property in object HybridShapeCircleCenterAxis: Returns the circle radius.
Radius property in object HybridShapeCircleCenterTangent: Returns the circle radius.
Radius property in object HybridShapeCircleBitangentRadius: Returns the circle radius.
RadiusLaw property in object HybridShapeSweepCircle: Returns or sets the radius law feature.
RadiusLawInversion property in object HybridShapeSweepCircle: Returns or sets the radius law inversion information.
RadiusLawType property in object HybridShapeSweepCircle: Returns or sets the radius law type.
RadiusNumber property in object ManufacturingToolCorrector: Gives the corrector radius number.
RadiusType property in object HybridShapeFilletBiTangent: Returns or Sets fillet radius type.
RadiusValue property in object HybridShapeFilletBiTangent: Returns or Sets fillet radius value.
RangeMax property in object IntParam: Returns or sets the value of the upper bound that the parameter object value can take.
RangeMax property in object RealParam: Returns or sets the value of the upper bound that the parameter object value can take.
RangeMaxValidity property in object IntParam: Returns or sets the type of the upper bound of the parameter.
RangeMaxValidity property in object RealParam: Returns or sets the type of the upper bound of the parameter.
RangeMin property in object IntParam: Returns or sets the value of the lower bound that the parameter object value can take.
RangeMin property in object RealParam: Returns or sets the value of the lower bound that the parameter object value can take.
RangeMinValidity property in object IntParam: Returns or sets the type of the lower bound of the parameter.
RangeMinValidity property in object RealParam: Returns or sets the type of the lower bound of the parameter.
RasterLevelOfDetail enum: Precision for views generated as raster (DPI).
Rating property in object HtsJointSpeedSettingsAtt: Returns or sets the Rating parameter.
Ratio property in object Scaling2: Returns the scaling ratio.
Ratio property in object HybridShapeScaling: Returns the scaling ratio.
Ratio property in object HybridShapePointOnCurve: Returns the distance ratio to the reference point.
Ratio property in object HybridShapePointBetween: Get the ratio.
RatioValue property in object Scaling2: Returns or sets the scaling ratio value.
RatioValue property in object HybridShapeScaling: Returns or sets the scaling ratio value.
RaytracingStatus property in object RenderingShooting: Returns or sets the the raytracing status for shooting.
ReMountDevice method in object MountManager
ReachColor property in object RobAnalysisSettingAtt: Returns or sets the ReachColor parameter.
Read method in object Documents: Reads a document stored in a file.
Read method in object TextStream: Returns a string which contains a given number of characters from the current position in the stream.
ReadDampingDataFromFile method in object ABQDamperConnectionProperty: Reads damping data from a text file for a damper connection property.
ReadISODefaultProperties method in object AnnotationSet: Retrieves the ISO 14405 and ISO 1101 default specifications.
ReadLine method in object TextStream: Returns a string which contains a line of charaters from the current position in the stream.
ReadMfgData method in object ManufacturingSetup: ReadMfgData.
ReadOnly property in object Document: Returns whether the file containing the document can be read only, on can be read and written.
ReadOnly property in object Parameter: Returns whether the parameter can be modified.
ReadStiffnessDataFromFile method in object ABQSpringConnectionProperty: Reads stiffness data from a text file for a spring connection property.
RealDataValues property in object ABQIAABQBaseMotionVB
RealDataValues property in object ABQIAABQFrequencyLoadingVB
RealParam object: Represents the real parameter.
ReboundsCount property in object RenderingShooting: Returns or sets the maximum number of rebounds levels to take into account for image computation.
RecordMode property in object ManipSettingAtt
RectPattern object: Represents the rectangular pattern.
RectangleLightLength property in object RenderingLight: Returns or sets the light area length.
RectangleLightWidth property in object RenderingLight: Returns or sets the light area width.
RectilinearBiDimFeatEdge object: 1-D boundary belonging to a feature whose topological result is two dimensional, the boundary having a rectilinear geometry.
RectilinearMonoDimFeatEdge object: 1-D boundary belonging to a feature whose topological result is one dimensional, the boundary having a rectilinear geometry.
RectilinearTriDimFeatEdge object: 1-D boundary belonging to a feature whose topological result is three dimensional, the boundary having a rectilinear geometry.
RedundancyMode property in object AsmConstraintSettingAtt: Sets redundancy check option for constraint creation.
RefAxisSystem property in object HybridShapeDirection: Returns or Sets the reference Axis System for Direction feature.
RefAxisSystem property in object HybridShapeTranslate: Returns or Sets the reference Axis System for Translate feature.
RefAxisSystem property in object HybridShapePointCoord: Returns or Sets the reference Axis System for PointCoord feature.
RefAxisSystem property in object HybridShapePlaneEquation: Returns or Sets the reference Axis System for PlaneEquation feature.
RefDoc property in object GeneralSessionSettingAtt: Returns the referenced documents parameter.
RefPoint property in object HybridShapeLineBisecting: Returns or sets the reference point used to create the bisecting line.
Reference object: Represents an object pointing to another object.
Reference property in object Shuttle: Returns or sets the associated reference object.
Reference property in object SelectedElement: Returns a Reference version of the Value property.
Reference property in object HybridShapeSymmetry: Returns or sets the reference element.
Reference property in object HybridShapeSweepCircle: Returns or sets the reference (functional curve or guide surface).
Reference property in object HybridShapeLawDistProj: Returns or sets the reference line of the law.
Reference property in object HybridShapeSweepExplicit: Returns or sets the reference surface (optional).
ReferenceAxis property in object Constraint: Returns or sets the constraint reference axis.
ReferenceAxis property in object HybridShapeAxisToAxis: Returns or sets the reference axis.
ReferenceDirectoryForTypes property in object LanguageSheetSettingAtt: Returns or sets the ReferenceDirectoryForTypes parameter.
ReferenceElement property in object HybridShapeNear: Role: To get_ReferenceElement on the object.
ReferenceElement property in object HybridShapeExtremum: Returns or sets the object on which the extremum is detected.
ReferenceFrame object: Interface designed to manage reference frame associated to a TPS.
ReferenceFrame method in object Annotation: Get the annotation on the ReferenceFrame interface.
ReferenceFrame method in object Annotation2: Gets the annotation on the ReferenceFrame interface.
ReferenceFrame property in object AssociatedRefFrame: Retrieves the Datum Reference Frame associated to a TPS.
ReferenceFrame2 property in object AssociatedRefFrame: Retrieves the Datum Reference Frame associated to a TPS.
ReferenceNumber property in object SWKAnthroVariable: Returns the reference number of the variable.
ReferenceProduct property in object Product: Returns the Reference Product of this instance.
ReferenceSurface property in object HybridShapeWrapSurface: Returns or sets the reference surface of the WrapSurface.
ReferenceSurface property in object StrCutoutFeature: Returns or Sets the Reference Surface used for defining for Current Cutout.
ReferenceSurface property in object SfmMemberCurve: Returns or sets the reference surface.
ReferenceSurfaceElement property in object Sweep: Returns or sets the reference surface .
ReferenceSurfaceOrientation property in object SfmMemberCurve: Returns or sets the reference surface orientation.
ReferenceTime property in object HumanActivityGroup
ReferenceType property in object Constraint: Returns or sets the constraint reference type.
ReferenceView property in object DrawingView: Returns or sets the reference view.
ReferenceView property in object Layout2DView: Returns or sets the reference view.
References object: A collection of all the references aggregated in an object.
Referential property in object SWKBody: Returns or sets the referential of the manikin.
Referential property in object MoveToPostureActivity
ReferentialDisplayed property in object SWKBody: Returns or sets the display of the referential.
ReflectionHeight property in object RenderingMaterial: Returns or sets the non-linear reflection height of a material.
ReflectionLength property in object RenderingMaterial: Returns or sets the non-linear reflection length of a material.
ReflectionMode property in object RenderingMaterial: Returns or sets the non-linear reflection mode of a material.
ReflectionsCount property in object RenderingShooting: Returns or sets the maximum number of reflections levels to take into account for image computation.
ReflectivityCoefficient property in object RenderingMaterial: Returns or sets the reflectivity coefficient of a material.
RefractionCoefficient property in object RenderingMaterial: Returns or sets the refraction coefficient of a material.
RefractionsCount property in object RenderingShooting: Returns or sets the maximum number of refractions levels to take into account for image computation.
Reframe method in object Viewer: Reframes the viewer's contents (Fits all in).
Refresh3D method in object SWKBodyElement: Refreshes the 3D representation of the current element.
RefreshDisplay property in object Application: Enables or disables the update of the display during the script replay.
RefreshDisplay method in object TCPTrace: Refresh display.
RefreshDisplay property in object SWKBodyElement: Enables or disables the update of the display during the script replay.
RefreshInfo method in object StiEngine: Refreshes Information concerning all CATIA Documents in session.
Regions property in object ABQLoad: Returns the region to which the load is applied.
Regions property in object ABQBoundaryCondition: Returns the region to which the boundary condition is applied.
RelatedDesigns property in object CD5Engine: Returns (gets) or sets the value of the Open option "Related Designs".
Relation object: Represents the relation object.
Relations property in object Part: Returns the collection object containing the part relations.
Relations property in object Activity: This property returns the interface which manages the knowlegde relations of the activity.
Relations object: Represents the collection of relations of the part or the product.
Relations property in object DrawingRoot: Returns the collection of relations of the drawing document.
Relations property in object DrawingDocument: Returns the collection of relations of the drawing document.
Relations property in object Layout2DRoot: Returns the collection of relations of the part document.
Relations property in object AnalysisManager: Returns the collection object containing the analysis relations.
Relations property in object Product: Returns the collection object containing the product relations.
Relations property in object ManufacturingView: Returns the Relations Set owned by a Manufacturing View.
RelationsNodeInTree property in object PartInfrastructureSettingAtt: Returns or sets the "RelationsNodeInTree" parameter.
RelationsUpdateInPartContextEvaluateDuringUpdate property in object KnowledgeSheetSettingAtt: Returns or sets the RelationsUpdateInPartContextEvaluateDuringUpdate parameter.
RelationsUpdateInPartContextSynchronousRelations property in object KnowledgeSheetSettingAtt: Returns or sets the RelationsUpdateInPartContextSynchronousRelations parameter.
Relay property in object Publication: Valuates a publication object with another publication object.
Release property in object SystemConfiguration: Returns the CATIA release number.
ReleaseAct object: Interface representing a Release activity.
ReleasedVoxel property in object CacheSettingAtt: Returns or sets the released voxel parameter.
Relimitation property in object HybridShapeLoft: Returns or sets the relimitation type between sections of the loft.
Remove object: Represents the remove, or substract boolean operation.
Remove method in object Scenes: Removes a scene from the Scenes collection.
Remove method in object Cameras: Removes a camera from the Cameras collection.
Remove method in object Selection
Remove method in object Outputs
Remove method in object ABQJobs: Removes an Abaqus Job using its index or its name from the job collection.
Remove method in object LightSources: Removes a light source from the LightSources collection.
Remove method in object ABQLoads: Removes a Abaqus load using its index or its name from the collection od loads.
Remove method in object Shots: Removes a shot from the collection.
Remove method in object ABQSteps: Removes an Abaqus step using its index or its name from the Step collection.
Remove method in object Activities: This method removes the specified activity on the current activities management.
Remove method in object ABQFields: Removes an Abaqus field using its index or its name from the field collection.
Remove method in object Materials: Removes a material from the materials collection.
Remove method in object ProductScenes: Removes a product-scene from the ProductScenes collection.
Remove method in object Sampleds: Removes a CATIASampled object from the CATIASampled collection.
Remove method in object Shuttles
Remove method in object List: Removes a Feature from the Features collection.
Remove method in object Constraints: Removes a constraint from the Constraints collection.
Remove method in object FixTogethers: Removes a FixTogether from the FixTogethers collection.
Remove method in object Groups: Removes a group from the Groups collection.
Remove method in object ABQProperties: Removes a Abaqus property using its index or its name from the property collection.
Remove method in object DrawingGDTs: Removes a drawing GDT from the drawing GDTs collection.
Remove method in object Marker2Ds: Removes a marker 2D from the Marker2Ds collection.
Remove method in object Marker3Ds: Removes a marker 3D from the Marker3Ds collection.
Remove method in object Joints: Remove a Joint from the Joints collection.
Remove method in object Relations: Removes a relation from the Relations collection.
Remove method in object StrPlates: Removes a plate from the Plates collection.
Remove method in object Parameters: Removes a parameter from the Parameters collection.
Remove method in object DMUReviews: Removes a DMUReview from the DMUReviews collection.
Remove method in object StrMembers: Removes a member from the Members collection.
Remove method in object Hyperlinks: Removes a Hyperlink from the Hyperlinks collection.
Remove method in object DrawingViews: Removes a drawing view from the DrawingViews collection.
Remove method in object Dressups: Removes a Dressup from the Dressups collection.
Remove method in object DrawingTexts: Removes a drawing text from the DrawingTexts collection.
Remove method in object ABQMassScalings: Removes the specified entry.
Remove method in object RenderingLights: Removes a light from the lights collection.
Remove method in object ABQInteractions: Removes an Abaqus interaction using its index or its name from the Interaction collection.
Remove method in object DrawingTables: Removes a drawing table from the DrawingTables collection.
Remove method in object DrawingSheets: Removes a drawing sheet from the DrawingSheets collection.
Remove method in object DrawingArrows: Removes a drawing arrow from the DrawingArrows collection.
Remove method in object Mechanisms: Removes a Mechanism from the Mechanisms collection.
Remove method in object MaterialFamilies: Removes a material family from the MaterialFamilies collection.
Remove method in object ABQAnalysisCases: Removes an Abaqus analysis case using its index or its name from the collection of Abaqus analysis cases.
Remove method in object DrawingLeaders: Removes a drawing leader from the DrawingLeaders collection.
Remove method in object DrawingThreads: Removes a drawing thread from the DrawingThreads collection.
Remove method in object DefeaturingFilters: Removes a filter from the Defeaturing filters collection and deletes it, using its index or its name.
Remove method in object DrawingWeldings: Removes a drawing welding from the drawing weldings collection.
Remove method in object DrawingPictures: Removes a drawing picture from the DrawingPictures collection.
Remove method in object ABQOutputRequests: Removes a Abaqus output request using its index or its name and output request type from the collection output requests.
Remove method in object AnnotatedViews: Removes an annotated view from the AnnotatedViews collection.
Remove method in object DrawingCoordDims: Removes a drawing CoordDim from the drawing CoordDims collection.
Remove method in object FunctActionsGroup: Removes an action from the actions' group.
Remove method in object Layout2DViews: Removes a layout2D view from the Layout2DViews collection.
Remove method in object Clashes: Removes a Clash object from the Clashes collection.
Remove method in object RenderingShootings: Removes a shooting from the shootings collection.
Remove method in object AnalysisSets: Removes a set using its index or its name from the set collection.
Remove method in object Inertias: Removes an Inertia object from the Inertias collection.
Remove method in object Sections: Removes a Section object from the Sections collection.
Remove method in object HumanTaskList
Remove method in object Layout2DSheets: Removes a Layout2Dsheet from the Layout2DSheets collection.
Remove method in object AnalysisCases: Removes a case using its index or its name from the case collection.
Remove method in object Distances: Removes a Distance object from the Distances collection.
Remove method in object DrawingDimensions: Removes a drawing dimension from the DrawingDimensions collection.
Remove method in object DrawingComponents: Removes a drawing component from the DrawingComponents collection.
Remove method in object ClashResults: Removes a ClashResult object from the ClashResults collection.
Remove method in object ABQSolutionCaseImages: Removes an analysis image using its index or its name from the solution case image collection.
Remove method in object MechanismCommands: Remove a MechanismCommand from the MechanismCommands collection.
Remove method in object ABQSolutionStepImages: Removes an analysis image using its index or its name from the solution step image collection.
Remove method in object AssemblyFeatures: Removes an AssemblyFeature object from the AssemblyFeatures collection.
Remove method in object ABQBoundaryConditions: Removes an Abaqus boundary condition using its index or its name from the collection of boundary conditions.
Remove method in object AnalysisEntities: Removes a entity using its index or its name from the entity collection.
Remove method in object RenderingEnvironments: Removes a environment from the environments collection.
Remove method in object ABQDataOutputRequests: Removes an Abaqus data output request using its index or its name from the data output requests collection.
Remove method in object AnalysisMeshParts: Removes a meshpart using its index or its name from the meshpart collection.
Remove method in object ABQFieldOutputRequests: Removes an Abaqus field output request using its index or its name from the field output requests collection.
Remove method in object Products: Removes a product from the Products collection.
Remove method in object ArrangementRuns: Removes the specified ArrangementRun object from the collection.
Remove method in object ArrangementAreas: Removes the specified ArrangementArea object from the collection.
Remove method in object Publications: Removes a publication from the product.
Remove method in object ABQHistoryOutputRequests: Removes an Abaqus history output request using its index or its name from the history output requests collection.
Remove method in object AnalysisLocalEntities: Returns an analysis local entity.
Remove method in object AnalysisOutputEntities: Removes a entity using its index or its name from the entity collection.
Remove method in object ArrangementPathways: Removes the specified ArrangementPathway object from the collection.
Remove method in object ArrangementContours: Removes the specified ArrangementContour object from the collection.
Remove method in object ArrangementRectangles: Removes the specified ArrangementRectangle object from the collection.
Remove method in object ArrangementBoundaries: Removes the specified ArrangementBoundary object from the collection.
Remove method in object DNBAttachmentFactory: Remove an attachment.
Remove method in object ManufacturingPrecedences: Removes an object from the precedences collection.
Remove method in object ArrangementItemReservations: Removes the specified ArrangementItemReservation object from the collection.
Remove method in object AnalysisMeshLocalSpecifications: Removes a local specification using its index or its name from the local specification collection.
Remove method in object ExpertRuleBaseComponentRuntimes: Removes an Expert component from the Rule Base collection.
Remove2 method in object Selection: Removes the iIndex-th SelectedElement object contained by the current selection.
Remove3DPosition method in object DNB3DState
Remove3DState method in object DNB3DState
RemoveAccuracyProfile method in object RobGenericController: Remove Accuracy profile given name in controller.
RemoveActiveLight method in object RenderingShooting: Removes a light from the shootings active lights list.
RemoveActivityConstraint method in object Activity
RemoveAffectedComponent method in object AssemblyFeature: Removes a component from the affected component list.
RemoveAll method in object HybridShapeSpline: Removes all elements in the list of points.
RemoveAll method in object RenderingLights: Removes all lights from the collection.
RemoveAll method in object AuxDevicesMgt: Remove all the aux devices defined for the robot.
RemoveAll method in object HybridShapePlaneMean: Removes all elements in the list of points.
RemoveAll method in object RenderingShootings: Removes all shootings from the collection.
RemoveAll method in object RenderingEnvironments: Removes all environments.
RemoveAll method in object ManufacturingPrecedences: Removes all objects from the precedences collection.
RemoveAllAlternateGraphics method in object SchRouteAlternateGraphic: Removes all alternate graphical primitives.
RemoveAllAlternateGraphicsOfStyle method in object SchRouteAlternateGraphic: Removes all alternate graphical primitives of the given style.
RemoveAllBound method in object HybridShapeFill: Removes all boundaries of the hybrid shape fill feature object.
RemoveAllConstraints method in object HybridShapeFill: Removes all constraints.
RemoveAllConstraints method in object SWKIKManager: Remove all existing constraints on the manikin.
RemoveAllCutPoints method in object HybridShapeSweep: Removes all cut points.
RemoveAllDraftAngleDefinitionLocations method in object HybridShapeSweepLine: Removes all geometrical elements and values necessary for draft angle definition.
RemoveAllExtrapolationsExceptTheFirstOne method in object HybridShapeExtrapol: Removes all extrapolations that may have been set, except the first one.
RemoveAllFacesToKeep method in object HybridShapeFilletBiTangent: Remove all the faces to keep.
RemoveAllFillPoints method in object HybridShapeSweep: Removes all fill points.
RemoveAllFrozenCurveSegments method in object HybridShapeCurveSmooth: Removes all Frozen Curve Segment of the hybrid shape curve smooth object.
RemoveAllFrozenPoints method in object HybridShapeCurveSmooth: Removes all Frozen Points of the hybrid shape curve smooth object.
RemoveAllGeometry method in object ManufacturingSurfaceGeomArea: Removes all the geometry linked to a Manufacturing Surface NCGeometry feature.
RemoveAllGeometry method in object ManufacturingPrismaticMachiningArea: Removes all the geometry of a specified type linked to a Manufacturing Prismatic Machining Area.
RemoveAllGraphicalPrimitives method in object SchRouteGraphic: Remove all graphical primitives of a route, including alternate graphical primitives.
RemoveAllInternalEdgesElement method in object HybridShapeExtrapol: Removes all internal elements.
RemoveAllLinks method in object DrawingViewGenerativeLinks: Removes all links of the drawing view.
RemoveAllPath method in object TCPTraceManager: Remove all traces from the current resource.
RemoveAllPointsAndParams method in object HybridShapeIntegratedLaw: Removes all the points and associated parameters.
RemoveAllPosAngle method in object HybridShapePositionTransfo: Removes all numerical positioning parameters : first axis direction angles.
RemoveAllPosCoord method in object HybridShapePositionTransfo: Removes all numerical positioning parameters : origin planar coordinates.
RemoveAllPrinterDirectories method in object PrintersSettingAtt: Remove all the directories including printer files.
RemoveAllPrinterGroups method in object PrintersSettingAtt: Remove all the groups of printers.
RemoveAlternateGraphic method in object SchRouteAlternateGraphic: Remove an alternate graphical primitive from a route.
RemoveAnalyses method in object Sampled: Returns or sets the Sampled object.
RemoveAngle method in object HybridShapeSweepLine: Removes an angle.
RemoveAngle method in object HybridShapeSweepCircle: Removes an angle.
RemoveAngle method in object HybridShapeSweepExplicit: Removes an Angle.
RemoveAssociation method in object DesignTable: Removes an existing association.
RemoveAttr method in object Activity: Removes attributes to an Activity type.
RemoveAttribute method in object AMPTag: Function to remove an existing attribute on the given AMPTag.
RemoveAuxAttribute method in object AMPTag: Function to remove an auxilliary attribute of the given AMPTag.
RemoveAuxDevicesByPosition method in object AuxDevicesMgt: Remove the aux device at the given index.
RemoveAxisSystem method in object ABQDamperConnectionProperty
RemoveAxisSystem method in object ABQSpringConnectionProperty
RemoveBodyToHeal method in object HybridShapeHealing: Removes the body to be healed from the list at specified position.
RemoveBoundAtPosition method in object HybridShapeFill: Removes boundary at specified position in hybrid shape fill feature object.
RemoveBoundaryElement method in object SchGRRZone: Remove a boundary element to the zone.
RemoveByAssignmentType method in object Items
RemoveByAssignmentType method in object Resources
RemoveByIndex method in object PspListOfBSTRs: Remove a character string from the list by specifying its position in the list.
RemoveByIndex method in object PspListOfLongs: Remove a long integer from the list by specifying its position in the list.
RemoveByIndex method in object PspListOfObjects: Remove an object from the list by specifying its position in the list.
RemoveByIndex method in object PspListOfDoubles: Removes a double from the list by specifying its position in the list.
RemoveByIndex method in object SchListOfBSTRs: Remove a character string from the list by specifying its position in the list.
RemoveByIndex method in object SchListOfLongs: Remove a long integer from the list by specifying its position in the list.
RemoveByIndex method in object SchListOfObjects: Remove an object from the list by specifying its position in the list.
RemoveByIndex method in object SchListOfDoubles: Remove a double from the list by specifying its position in the list.
RemoveColumn method in object DrawingTable: Removes the indicated column.
RemoveConnector method in object PspPhsyicalProduct: Removes part connector.
RemoveConnector method in object SchCompConnector: Remove a connector.
RemoveConstraint method in object HybridShapeFill: Removes constraint at specified position in hybrid shape fill feature object.
RemoveConstraint method in object SWKIKManager: Remove the given constraint.
RemoveConstraint method in object MoveToPostureActivity
RemoveConstraint method in object OptimizationConstraints: Removes a given optimization constraint using its index or its name from the optimization constraints collection.
RemoveControlPoint method in object HybridShapeSpline: Removes a point at the given position.
RemoveCurvatureRadiusDirection method in object HybridShapeSpline: Removes Curvature Radius Direction for the given point of the spline.
RemoveCurvatureRadiusValue method in object HybridShapeSpline: Removes Curvature Radius Value for the given point of the spline.
RemoveCurves method in object HybridShapeWrapCurve: Removes a couple of reference curve and target curve from the WrapCurve.
RemoveCuttingElem method in object HybridShapeSplit: Removes a cutting feature.
RemoveDLName method in object DLNameSettingAtt: Remove a logical name.
RemoveDof method in object ABQDamperConnectionProperty: Unsets the linear damping value of the Damper for given degree of freedom.
RemoveDof method in object ABQSpringConnectionProperty: Unsets the stiffness of the spring for given degree of freedom.
RemoveDraftAngleDefinitionLocationPosition method in object HybridShapeSweepLine: Removes a draft angle location.
RemoveDropOffView method in object SchDropOffView: Removes a drafting view from the schematics diagram.
RemoveERAssignment method in object EKPServices: Removes the ER assignment for the passed Geometric Feature.
RemoveERWithFTA method in object EKPServices: Removes the ER assignment for the passed FTA.
RemoveEdgeToKeepSharp method in object HybridShapeHealing: Removes the edge from the list of edges to be kept sharp at specified position.
RemoveEdgeToTear method in object HybridShapeUnfold: Removes an element used by the hybrid shape unfold feature object.
RemoveElectronicBehaviour method in object PCBObject
RemoveElem property in object HybridShapeFilletTriTangent: Returns or sets the support surface to remove feature.
RemoveElement method in object HybridShapeAssemble: Removes an element used by the hybrid shape assemble feature object.
RemoveElement method in object HybridShapePolyline: Removes the element at a specified position in the polyline.
RemoveElement method in object HybridShapePlaneMean: Removes a point in the list.
RemoveElement method in object HybridShapeExtractMulti: Removes the body to be extracted from the list of constraints at specified position.
RemoveElementToFreeze method in object HybridShapeHealing: Removes the element from the list of elements to be freezed at specified position.
RemoveElementToKeep method in object HybridShapeTrim: Removes an element from specifications.
RemoveElementToKeep method in object HybridShapeSplit: Removes an element from specifications.
RemoveElementToRemove method in object HybridShapeTrim: Removes an element from specifications.
RemoveElementToRemove method in object HybridShapeSplit: Removes an element from specifications.
RemoveElementToTransfer method in object HybridShapeUnfold: Remove an elements to transfer.
RemoveEndcut method in object SfmProfile: Removes Existing Endcut on Profile.
RemoveExplicit method in object Group: Removes a product from the group using its index.
RemoveExtension method in object SchematicExtension: Removes a Schematic extension to an application object.
RemoveExtrapolation method in object HybridShapeExtrapol: Removes the iPos-th extrapolation that has been set.
RemoveFace object: Represents the Remove Face operation.
RemoveFace property in object RemoveFace: Adds a new face to be removed.
RemoveFace property in object ReplaceFace: Returns the face to be removed.
RemoveFaceForClosing method in object HybridShapeLoft: Removes face used to close the lofted surface.
RemoveFaceToDraft method in object DraftDomain: Removes a face from those to be drafted.
RemoveFaceToKeep method in object HybridShapeFilletBiTangent: Remove a face to keep.
RemoveFaceWithDifferentThickness method in object Shell: Removes an existing face from those to be thicken with different offset values by the shell process.
RemoveFaceWithDifferentThickness method in object Thickness: Removes an existing thickened face.
RemoveFaces property in object RemoveFace: Get the specified faces to be removed.
RemoveFastenerFromProcess method in object DNBFastenerItemServices: Unassigns a specified DELMIAFastener from a specified Activity.
RemoveFastenerFromResource method in object DNBFastenerItemServices: Unassigns a specified DELMIAFastener from a specified Resource.
RemoveFederatedElement method in object HybridShapeAssemble: Removes an element to the list of elements to federate.
RemoveFile method in object SendToService: Removes a file from the list of the files that will be copied.
RemoveFilter method in object Document: Removes an existing visualization filter.
RemoveFittingPoints method in object HybridShapeSweepExplicit: Removes the fitting points.
RemoveFixTogether method in object FixTogether: Removes a FixTogether from the FixTogether.
RemoveFormalParameter method in object Law: Removes a formal parameter of the law.
RemoveFreeParameter method in object FreeParameters: Removes a free parameter.
RemoveFrom method in object AMPPath: Function to remove an AMPTag at a given index of the AMPPath.
RemoveFromPPR method in object Fastener: Removes the fastener from the current session without deleting it in the Manufacturing HUB project.
RemoveFrozenCurveSegment method in object HybridShapeCurveSmooth: Removes Frozen Curve Segment from the list of Forzen curves in hybrid shape curve smooth object.
RemoveFrozenPoint method in object HybridShapeCurveSmooth: Removes Frozen Point from the list of frozen points in hybrid shape curve smooth object.
RemoveGraphicalPrimitive method in object SchCntrGraphic: Remove a graphical primitive from a connector.
RemoveGraphicalPrimitive method in object SchRouteGraphic: Remove a graphical primitive from a route.
RemoveGraphicalRepresentation method in object SchCompGraphic: Remove a graphical representation from a component.
RemoveGraphicalRepresentation method in object SchZoneGraphic: Remove a graphical representation from a zone.
RemoveGuide method in object HybridShapeLoft: Removes a guide curve from the lofted surface.
RemoveGuide method in object HybridShapeSpine: Removes a guide from the spine curve.
RemoveGuide method in object HybridShapeSweepConic: Removes a guide curve given its index.
RemoveGuide method in object HybridShapeSweepCircle: Removes a guide curve.
RemoveGuide method in object HybridShapeSweepExplicit: Removes a guide curve.
RemoveGuideCrv method in object HybridShapeSweepLine: Removes a guide curve.
RemoveGuideSur method in object HybridShapeSweepLine: Removes a guide surface.
RemoveGuideTangent method in object HybridShapeLoft: Removes a tangent surface of a guide from the lofted surface.
RemoveImage method in object AnalysisImages: Deletes the Analysis Image from the analysis images collection of the Analysis Set.
RemoveInterferenceFit method in object ABQSurfaceToSurfaceContact: Removes interference fit from a contact pair feature.
RemoveInternalFlow method in object SchCompFlow: Remove an internal flow from a component.
RemoveInterrupt method in object DrawingDimExtLine: Remove interruption on extension lines.
RemoveInterruption method in object DrawingArrow: Remove an interruption to an arrow.
RemoveInterruption method in object DrawingLeader: Remove an interruption to an leader.
RemoveLength method in object HybridShapeSweepLine: Removes a length.
RemoveLimit method in object SfmSuperPlate: Removes one object from the list of limits by its index or its name.
RemoveLimits method in object SWKSegment: Removes the angular limitations of the segment.
RemoveLink method in object Activity: This method removes a link existing on the current activity.
RemoveMachinableGeometry method in object ManufacturingMachinableArea: Removes a machinable geometry from the list.
RemoveMasterShapeRepresentation method in object Product: Removes the master shape representation from the product.
RemoveMember method in object PspGroup: Removes a member from the group.
RemoveMember method in object SchComponentGroup: Remove a member to the component group.
RemoveMfgAssembly method in object MfgAssemblyFactory: Removes a given Manufacturing Assembly from the MA Applicative Container.
RemoveMotionProfile method in object RobGenericController: Remove Motion profile given name in controller.
RemoveNCGeometry method in object ManufacturingSurfaceMachiningArea: Removes all the NCGeometry of a specified type linked to a Manufacturing Surface Machining Area.
RemoveObjFrameProfile method in object RobGenericController: Remove ObjFrame profile given name in controller.
RemoveObject method in object Marker3D: Removes an object which is linked to the marker 3D using its index.
RemoveObject method in object Hyperlink: Removes an Url which is linked to the Hyperlink using its index.
RemoveOrientation property in object HybridShapeFilletTriTangent: Returns or sets the third orientation used to specify fillet center position.
RemoveParameter method in object HybridShapeSweepConic: Removes conical sweep parameter, whether it is a single value or a law.
RemovePart method in object MfgAssembly: Removes a part (Product, Resource or other MA/MK) from the Manufacturing Assembly.
RemovePartSurfaces method in object ManufacturingPattern: Remove the Part Surfaces of the Manufacturing Pattern.
RemovePathByIndex method in object TCPTraceManager: Remove a specific path based on its position in the list.
RemovePathByObject method in object TCPTraceManager: Remove a specific trace based on the object.
RemovePickedMfgAssembly method in object PickActivity
RemovePickedProduct method in object PickActivity
RemovePieceCutter method in object HybridShapeTrim: Remove piece Cutting element and its orientation.
RemovePlacedMfgAssembly method in object PlaceActivity
RemovePlacedProduct method in object PlaceActivity
RemovePoint method in object DrawingArrow: Remove a point from an arrow.
RemovePoint method in object DrawingLeader: Remove a point from an leader.
RemovePointAndParam method in object HybridShapeIntegratedLaw: Removes a point and its parameter.
RemovePointedGeometry method in object ManufacturingMachinableGeometry: Removes a geometry from the pointed geometry list.
RemovePoints method in object SchRoute: Remove points from route.
RemovePoints method in object SchGRRRoute: Remove points from route graphic.
RemovePosition method in object Plane: Removes reference position of a plane.
RemovePosition method in object FunctActionsGroup: Removes an action from the actions' group.
RemovePrinterDirectory method in object PrintersSettingAtt: Remove a directory of printer files from the directories list.
RemovePrinterGroup method in object PrintersSettingAtt: Remove a group of printers.
RemoveProduct method in object FixTogether: Removes a Product from the FixTogether.
RemoveRadius method in object HybridShapeSweepCircle: Removes a radius.
RemoveRelimitingGeometry method in object ManufacturingOperation: Removes the geometry on relimiting element PROFILE CONTOURING operation ONLY.
RemoveRootOfFacts method in object ExpertRuleBaseRuntime: Removes a root of facts from the rule base.
RemoveRow method in object DrawingTable: Removes the indicated row.
RemoveSample method in object Replay: Remove a specific sample.
RemoveSection method in object HybridShapeLoft: Removes a loft section from the lofted surface.
RemoveSection method in object HybridShapeSpine: Removes a section or a plane from the spine curve.
RemoveSectionPoint method in object HybridShapeLoft: Removes a closing point of a section from the lofted surface.
RemoveSectionTangent method in object HybridShapeLoft: Removes the tangent surface of a section from the lofted surface.
RemoveShapeRepresentation method in object Product: Removes a specific representation from the product.
RemoveSlot method in object SfmSlots: Removes Existing Slot.
RemoveStartPointGeometry method in object ManufacturingOperation: Removes the start point element on POCKETING operation ONLY.
RemoveSubElement method in object HybridShapeAssemble: Removes a sub element used by the hybrid shape assemble feature object.
RemoveSupport method in object HybridShapeSpline: Removes the support surface.
RemoveSupport method in object HybridShapeLinePtPt: Removes the support surface.
RemoveSupport method in object HybridShapeLinePtDir: Removes the support surface.
RemoveSupport method in object HybridShapeLineTangency: Removes the support surface.
RemoveSupport method in object HybridShapeCircle3Points: Removes the support surface.
RemoveSupportAtPosition method in object HybridShapeFill: Removes support at specified position in hybrid shape fill feature object.
RemoveSymbol method in object SchGRRCntr: Remove the graphical primitive used as the connector's symbol.
RemoveTangency method in object HybridShapeSweepConic: removes tangency surface or curve and its angle given the guide curve index.
RemoveTangentDirection method in object HybridShapeSpline: Removes tangent Direction for the given point of the spline.
RemoveTension method in object HybridShapeSpline: Removes the Tension for the given point of the spline.
RemoveToolProfile method in object RobGenericController: Remove tool profile given name in controller.
RemoveTrickyFace method in object HybridShapeOffset: Remove the tricky face object on the object.
RemoveURL method in object Noa: Removes an URL.
RemoveURL method in object FlagNote: Remove an URL.
RemovedMaterialPercentage property in object PartComps: Returns the removed material percentage.
RemovedMaterialVolume property in object PartComps: Returns the removed material volume.
RemovefromLogicalDataAttrList method in object PlugMapViewSettingAtt: Method to Remove a parameter fron the LogicalDataAttrList.
RemovefromTerminationAttrList method in object PlugMapViewSettingAtt: Method to Remove a parameter fron the TerminationAttrList.
Rename method in object Relation: Renames the relation.
Rename method in object Parameter: Renames the parameter.
RenameDLName method in object DLNameSettingAtt: Rename an existing DLName.
RenameSelectionSet method in object SelectionSets: Renames a Selection Set.
Renamed property in object Parameter: Returns a boolean saying if the parameter is a renamed parameter or not.
Render method in object RenderingShooting: Render the shooting Caution: Product involved in rendering calculation should not be closed before the end of computation.
RenderStyle property in object TreeTabSettingAtt
RenderingEnvironment object: Represents a Environment object.
RenderingEnvironmentWall object: Represents a Environment object.
RenderingEnvironments object: A collection of all the Rendering Environments objects.
RenderingLight object: Represents a Rendering Light object.
RenderingLights object: A collection of all the Rendering Lights objects.
RenderingMaterial object: Represents an RenderingMaterial object.
RenderingMaterial property in object Material: Returns the rendering material object from the current material.
RenderingMode property in object Viewer3D: Returns or sets the rendering mode.
RenderingMode property in object Layout2DRoot: Set/Get the rendering mode of Layout2D.
RenderingSettingAtt object: The interface to access a CATIARenderingSettingAtt.
RenderingShooting object: Represents a Material object.
RenderingShootings object: A collection of all the Rendering Shootings objects.
Reorder method in object List: Reorders an element by moving it from the current position to the target position.
RepMod property in object IgesSettingAtt: Returns or sets the Export representation mode setting parameter value.
ReparentTagGroup method in object TagGroupFactory
Repartition object: Represents the repartition.
RepeatU property in object RenderingMaterial: Returns or sets the texture repeat status along U axis.
RepeatV property in object RenderingMaterial: Returns or sets the texture repeat status along V axis.
Replace method in object List: Sets an item in the list at a position.
Replace method in object SchReplace: Replace an existing component with this component.
ReplaceBoundAtPosition method in object HybridShapeFill: Replaces the boundary at specified position in the Fill.
ReplaceByCGR method in object DMUDataFlow: Replaces all components of the product by the corresponding CGR located in a directory.
ReplaceComponent method in object Products: Creates a component which replace the given one.
ReplaceConstraint method in object HybridShapeFill: Replaces the constraint at specified position in the Fill.
ReplaceElement method in object HybridShapeAssemble: Replaces the element at specified position in the hybrid shape assemble feature object.
ReplaceElement method in object HybridShapePolyline: Replaces the element at a specified position in the polyline.
ReplaceElement method in object HybridShapeExtractMulti: Replaces an element to extract in the list of constraints at specified position.
ReplaceElementsToTransfer method in object HybridShapeUnfold: Replace an elements to transfer.
ReplaceFace object: Represents the Replace Face operation.
ReplaceMaterialLinks method in object MaterialManager: In current session, replace all links towards a material 1 with a link towards an other material 2.
ReplaceOnlyAfterCurrent property in object PartInfrastructureSettingAtt: Returns or sets the "ReplaceOnlyAfterCurrent" parameter.
ReplacePointAtPosition method in object HybridShapeSpline: Replaces a point in the list at the given position.
ReplacePointAtPosition method in object HybridShapePlaneMean: Replaces a point in the list at the given position.
ReplaceProduct method in object Products: Creates a component which replace the given one.
ReplaceSupportAtPosition method in object HybridShapeFill: Replaces the support at specified position in the Fill.
ReplaceToHealElement method in object HybridShapeHealing: Replaces an element to heal.
Replay object
Report method in object ExpertRuleBaseRuntime: Launch a Report.
ReportCheckAdvisor property in object ReportGenerationSheetSettingAtt: Returns or sets the ReportCheckAdvisor parameter.
ReportCheckExpert property in object ReportGenerationSheetSettingAtt: Returns or sets the ReportCheckExpert parameter.
ReportDescriptionLength property in object ExpertRuleBaseRuntime: Returns or sets the Report Description Length (For Text option only).
ReportGenerationSheetSettingAtt object: The interface to access a CATIAReportGenerationSheetSettingAtt.
ReportHtmlInCatiaSession property in object ReportGenerationSheetSettingAtt: Returns or sets the ReportHtmlInCatiaSession parameter.
ReportName property in object Geometry2D
ReportObjectsInformation property in object ReportGenerationSheetSettingAtt: Returns or sets the ReportObjectsInformation parameter.
ReportOutPutFormat property in object ExpertRuleBaseRuntime: Returns or sets the Report OutPut Format.
ReportOutputDirectory property in object ReportGenerationSheetSettingAtt: Returns or sets the ReportOutputDirectory parameter.
ReportParametersInformation property in object ReportGenerationSheetSettingAtt: Returns or sets the ReportParametersInformation parameter.
ReportPassedObjects property in object ReportGenerationSheetSettingAtt: Returns or sets the ReportPassedObjects parameter.
ReportPath property in object ExpertRuleBaseRuntime: Returns or sets the Report output path.
ReportShowResult property in object ExpertRuleBaseRuntime: Returns or sets the option for sorting the report.
Representation property in object ManufacturingActivity: This property returns the path of the representation file for a manufacturing Activity.
RepresentationMode property in object DrawingViewGenerativeBehavior: Returns or sets generated geometry representation mode.
RequestedModesOption property in object ABQFrequencyStep: Sets or returns the requested modes option.
RequestedModesValue property in object ABQFrequencyStep: Returns or sets requested modes value.
Reset method in object SWKAnthro: Reset the anthtropometry.
Reset method in object SWKVision: Resets all attributes of the vision to their default values.
ResetAllModalValues method in object ManufacturingGeneratorData: Resets all modal values.
ResetAngularLimitations method in object SWKBody: Resets the angular limitations depending on the param piReset: 0 -> 2 OR 3 OR 4 depending of the first encountered.
ResetAngularLimitations method in object SWKSegment: Reset the angular limitations of the segment depending on piReset: 0 -> 2 OR 3 OR 4 depending of the first encountered.
ResetAngularLimitations method in object SWKLineOfSightNode: Reset the angular limitations of the line of sight depending on piReset: 0 -> 2 OR 3 OR 4 depending of the first encountered.
ResetAttachedOwner method in object TCPTrace: Resets the attached owner of the trace to the world.
ResetAttachedOwner method in object TCPTraceManager: Resets the attached owner of the trace to the world.
ResetAttaches method in object SWKBody: Reset the attaches of the body.
ResetCmdValueToZero method in object Mechanism: Sets the command value to zero for the given command without disturbing part positions.
ResetCutback method in object StrMemberExtremity: Resets the defined cutback object.
ResetDerivedAttr method in object PspAttribute: Reset derived status of the attribute to not-derived.
ResetGraphics method in object TCPTrace: Reset the current appearance regarding the current general settings (not the one applied on the current object).
ResetIKOffsets method in object SWKBody: Reset the offsets of the body.
ResetPPWORDSyntax method in object ManufacturingActivitySyntax: Resets the PP words syntax.
ResetPosition method in object PointFastener: ets the position of point fastener to design position or DPE Saved Manufacturing Position  Valid Param : 0,1 </dl> <dt>Example: <dd> //to reset the position to design position MyFastener.
ResetPosture method in object SWKBody: Set the manikin to the default (standing) posture.
ResetPosture method in object SWKSegment: Set the segment's posture back to its default position.
ResetPosture method in object SWKSegmentNode: Set the posture of all segment under this node back to their default position.
ResetPosture method in object SWKLineOfSightNode: Reset the posture of the line of sight for the dof piDOFId.
ResetPrefAngles method in object SWKBody: Reset the pref angles of the body.
ResetPrefAngles method in object SWKSegment: Reset the preferred angles of the segment.
ResetPrefAngles method in object SWKLineOfSightNode: Reset the preferred angles of the line of sight for the dof piDOFId.
ResetSelection method in object AnalysisImage: Resets all selections in an image.
ResetTarget method in object SWKIKConstraint: Reset the offset of the target object (i.
ResetToAdminValues method in object SettingController: Restores the administrated values of the all attributes.
ResetToAdminValuesByName method in object SettingController: Restores the administrated values of a subset of the attributes.
ResetToAdminValuesForUnits method in object UnitsSheetSettingAtt: Implements a function from an interface.
ResetValue method in object SWKDOF: Sets the value of the DOF to its default value.
ReshapeExtremity method in object SchRoute: Change the position of the extremity of the route.
ReshapeExtremity2 method in object SchRoute: Change the position of the extremity of the route.
ResidualModeReqBoolean property in object ABQFrequencyStep: Returns or sets Residual Mode Request Boolean Value.
Resolve method in object SWKIKManager: Launch the IK solver to minimize the potential functions of the constraints (i.e. reach all defined targets).
ResolvedSectionsPath property in object PathESSRessourcesSettingAtt: Returns or sets the ResolvedSectionsPath parameter.
ResolvedText property in object WIText
Resource object: The object that represents a resource.
ResourceCollection object: Interface representing collection of Resources.
ResourceFilter property in object TreeTabSettingAtt
ResourceProgramManager object: Represents the Resource Program manager of a resource.
Resources object: The collection of resources related to the current activity.
Resources property in object Activity: This property returns the interface which manages the resources hierarchy on the activity.
Resources property in object PPRDocument: Retrieves the list of Resources contained in the current document.
Response property in object ABQHeatTransferStep: Sets or returns the response type.
Response_Type enum: Thermal response types.
RestartReadInterval property in object ABQJob: Sets or returns the interval of restart read requests.
RestartReadJob property in object ABQJob: Sets or returns or the path to the original job (*.
RestartReadOption property in object ABQJob: Sets or returns the restart read option.
RestartReadStep property in object ABQJob: Sets or returns the Step.
RestartReadStepNumber property in object ABQJob: Sets or returns the step number of restart read requests.
RestartReadStepSelectionOption property in object ABQJob: Sets or returns the step selection option for restart read.
RestartRequestFrequency property in object ABQJob: DEPRECATED - please use RestartRequestOption instead.
RestartRequestFrequencyValue property in object ABQJob: Sets or returns the frequencey value of restart requests.
RestartRequestIntervalValue property in object ABQJob: Sets or returns the interval of restart requests.
RestartRequestOption property in object ABQJob: Sets or returns the restart request option.
RestartRequestOverlay property in object ABQJob: Sets or returns the overlay option for the restart request.
RestartRequestTimeMarks property in object ABQJob: Sets or returns the time marks flag for restart requests.
RestoreInitialState method in object SimulationInitState: Restores initial state attributes for all objects in the current document that have a saved initial state.
RestoreInitialStateList method in object SimulationInitState: Restores initial state attributes for the objects in the given list.
RestoreValuePosition method in object DrawingDimension: Restore dimension value position.
ResultOutputDir property in object FASReportingSettingAtt: Gets value of "OLP Robot Program Directory" parameter.
RetainLock property in object CD5SaveOperation: Returns (gets) or sets the value of the Save option "Retain Lock".
Retrieve method in object FunctActionsGroup: Returns an action using its index or its name from the actions group.
RetrieveKindOfLinked method in object FunctAssociation: Retrieve the kind of linked object.
RetrieveLinked method in object FunctAssociation: Retrieve a linked object.
RetrieveMfgAssembly method in object MfgAssemblyFactory: Retrieve all the Manufacturing Assemblies of a given name.
RetrieveMfgAssemblyAtIndex method in object MfgAssemblyFactory: Retrieves a Manufacturing Assembly at the given index from the MA Applicative Container.
RetriveALLMfgAssy method in object MfgAssemblyFactory: Retrieve all the Manufacturing Assemblies of a given type.
Reverse method in object Hole: Reverses the hole direction .
Reverse method in object ManufacturingPattern: Reverses the numbering of a Manufacturing Pattern.
ReverseDepth method in object Stiffener: Reverses the stiffener direction.
ReverseDirection method in object Thread: Swap the direction of the thread or the tap.
ReverseDirection method in object StrPlate: Reverses the material orientation of the plate.
ReverseInnerSide method in object Prism: Reverses the prism inner side when the profile is open.
ReverseInnerSide method in object AssemblyPocket: Reverses the pocket inner side when the profile is open.
ReverseThickness method in object Stiffener: Reverses the stiffener thickness direction.
ReverseTime method in object Sampled: Returns or sets the Sampled object.
Revision property in object CD5SaveItem: Returns or sets the target revision of the CD5SaveItem for the Save Operation.
Revision property in object Product: Returns or sets the product's revision number.
RevolAxis property in object HybridShapePlaneAngle: Returns or sets the rotation axis.
RevolNumber property in object HybridShapeHelix: Reads the revolution number of the Helix.
RevolNumber property in object HybridShapeSpiral: Reads / Changes the revolution number of the Spiral.
RevoluteAxis property in object Revolution: Returns or sets the rotation axis for Revol.
Revolution object: Represents the revolution-based shapes.
Rib object: Represents the rib shape.
RibbonRelimitationMode property in object HybridShapeFilletBiTangent: Returns or Sets fillet ribbon relimitation mode (or fillet extremities mode).
RibbonRelimitationMode property in object HybridShapeFilletTriTangent: Returns or sets fillet ribbon relimitation mode (or fillet extremities mode).
RightMargin property in object PageSetup: Returns or sets the right margin.
RmvNotAssgnPrdResOnSync property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the RmvNotAssgnPrdResOnSync parameter.
RobAnalysisHeartBeatUsageSettingAtt object: Interface to handle the parameter used to set as an option, to either enable or disable robot heart beat rate while motion planning, in the Infrastructure-DELMIA Infrastructure-Robot Analysis Tools Options Tab page.
RobAnalysisSettingAtt object: Interface to handle parameters of Infrastructure-DELMIA Infrastructure-Robot Analysis Tools Options Tab page.
RobControllerFactory object: Interface to manipulate Robot Controller.
RobGenericController object
RobotMotion object: Represents a Robot Motion.
RobotProgramDir property in object IgpOlpSettingAtt: Returns or sets value of OLP Directory parameter.
RobotTask object: Represents the Robot Task.
RobotTaskCloneFactory object: Represents the Clone Factory for Robot Tasks.
RobotTaskFactory object: Represents the Task Creation Factory for Robots.
Rollback method in object SettingController: Restores the last memory copy of the setting attribute values.
RollbackForUnits method in object UnitsSheetSettingAtt: Implements a function from an interface.
RootDLNameCreationRight property in object DLNameSettingAtt: Returns or set the right to create new Root DLNames.
RootParameterSet property in object Parameters: Returns the root parameter set of a document.
RootType property in object ElecSchematicObject: Returns the Electrical Schematic Object's Root Type (Equipment, Signal, Bundle, Wire).
RotAccelColor property in object RobAnalysisSettingAtt: Returns or sets the RotAccelColor parameter.
RotAccelLimit property in object RobAnalysisSettingAtt: Returns or sets the RotAccelLimit parameter.
RotSpeedColor property in object RobAnalysisSettingAtt: Returns or sets the RotSpeedColor parameter.
RotSpeedLimit property in object RobAnalysisSettingAtt: Returns or sets the RotSpeedLimit parameter.
RotaryAxis property in object ManufacturingMachine: Give the MfgRotaryAxis linked to a Manufacturing Machine.
Rotate object: Represents the shape rotate feature object.
Rotate method in object Viewer3D: Applies a rotation.
Rotate method in object ARCTag: Function to Rotate the ARC tag about a given direction vector as the axis of rotation.
Rotate method in object StrMember: Rotates the section on its support object.
Rotate method in object DrawingTable: Rotates the table relatively to its original position.
Rotate method in object SchMovable: Rotate a schematic object with an angle in radian.
RotateAtPoint method in object SchMovable2: Rotate a schematic object with an angle in radian at a point.
RotateTag method in object ARCTagGroup: Function to rotate the ARC tag with the given index about the given direction vector.
RotateX method in object ARCTag: Function to rotate the ARC tag about it's x-axis.
RotateXTag method in object ARCTagGroup: Function to rotate the ARC tag with the given index about it's x-axis.
RotateY method in object ARCTag: Function to rotate the ARC tag about it's y-axis.
RotateYTag method in object ARCTagGroup: Function to rotate the ARC tag with the given index about it's y-axis.
RotateZ method in object ARCTag: Function to rotate the ARC tag about it's z-axis.
RotateZTag method in object ARCTagGroup: Function to rotate the ARC tag with the given index about it's z-axis.
Rotation property in object PageSetup: Returns or sets the rotation of the document or the image to print.
Rotation property in object RenderingEnvironmentWall: Returns or sets the texture rotation angle (in degrees).
RotationAngle property in object Pattern: Returns the pattern global rotation angle.
RotationOffsetAngle property in object SWKIKConstraint: Returns or sets the rotation offset angle for the 3D plane constraint.
RotationOrientation property in object CircPattern: Returns or sets whether the shapes are copied clockwise on the crowns with respect to the rotation axis direction.
RotationSnapAngle property in object FTASettingAtt: Returns or sets the Rotation Snap Angle parameter.
RotationSnapAuto property in object FTASettingAtt: Returns or sets the Rotation Snap Auto parameter.
RotationSphereMode property in object VisualizationSettingAtt: Returns the RotationSphereMode parameter.
RotationType property in object HybridShapeRotate: Returns or sets the type of the rotation definition.
Roughness object: Interface to manage Roughness TPS.
Roughness method in object Annotation: Get the annotation on the Roughness interface.
Roughness method in object Annotation2: Gets the annotation on the Roughness interface.
RoundRadius property in object AutoFillet: Returns the Round radius.
RoundRadiusActivation property in object AutoFillet: Returns the AutoFillet RoundRadiusActivation flag (for AutoFillet only).
RouteStringPartInSpace method in object PspPlacePart: Routes a string part.
RowNumber property in object DrawingGDT
RpmReport object
Rule object: Represents the program relation.
RuleBaseEdition property in object ExpertRuleBaseRuntime: Returns the editable object corresponding to this rulebase.
RuleEdition property in object ExpertRuleRuntime: Returns the editable object corresponding to this rule.
RuleSet property in object ExpertRuleBaseRuntime: Returns the Set linked to the RuleBase.
RuleSetEdition property in object ExpertRuleSetRuntime: Returns the editable object corresponding to this ruleset.
RuledDevelopableSurface property in object HybridShapeBlend: Returns or sets the ruled developable surface mode.
Run method in object SendToService: Executes the copy action, according to previously set files and options.
Run method in object CD5SaveOperation: Runs the Save as per the cusomization done so far.
Run method in object Optimization: Runs the optimization as it is defined.
Run method in object SfmProfile: Compute the member's result.
Run method in object SfmSuperPlate: Build the SplitPlates.
Run method in object AnalysisAdaptivityManager: Run the adaptivity process.
RunAnnotBehavior property in object SimulationSettingAtt: Returns or sets the RunAnnotBehavior setting attribute value.
RunAnnotation property in object SimulationSettingAtt: Returns or sets the RunAnnotation setting attribute value.
RunEndCondition property in object SimulationSettingAtt: Returns or sets the RunEndCondition setting attribute value.
RunFileGenerator method in object ManufacturingOutputGenerator: Runs the Output Generator on the datas used for generation.
RunHlnkBehavior property in object SimulationSettingAtt: Returns or sets the RunHlnkBehavior setting attribute value.
RunHyperlink property in object SimulationSettingAtt: Returns or sets the RunHyperlink setting attribute value.
RunPause property in object SimulationSettingAtt: Returns or sets the RunPause setting attribute value.
RunStateMgt property in object SimulationSettingAtt: Returns or sets the RunStateMgt setting attribute value.
RunStepSize property in object SimulationSettingAtt: Returns or sets the RunStepSize setting attribute value.
RunTextBehavior property in object SimulationSettingAtt: Returns or sets the RunTextBehavior setting attribute value.
RunTextMsg property in object SimulationSettingAtt: Returns or sets the RunTextMsg setting attribute value.
RunTransition method in object AnalysisModel: Apply a transition to the analysis model.
RunViewpoint property in object SimulationSettingAtt: Returns or sets the RunViewpoint setting attribute value.
RunVisBehavior property in object SimulationSettingAtt: Returns or sets the RunVisBehavior setting attribute value.
ratioLock property in object DrawingPicture: Returns or sets the ratioLock of the drawing picture.
remove_KeepFace method in object RemoveFace: Removes a face to be Kept.
remove_RemoveFace method in object RemoveFace: Removes a face to be removed.
reorder_Sheets method in object DrawingRoot: Changes the positions of the sheets in this drawing according to the given ordered list.
reorder_Sheets method in object Layout2DRoot: Changes the positions of the sheets in this drawing according to the given ordered list.
reorder_Views method in object DrawingSheet: Changes the positions of the views in this sheet according to the given ordered list.
reorder_Views method in object Layout2DSheet: Changes the positions of the views in this sheet according to the given ordered list.