Represents the hybrid shape curve smoothing operation feature.
Role: To access the data of the curve smoothing operation.of the hybrid shape curve parameter object.
This data includes:
- The curve to smooth
- The support (if exist )
- The tangent tolerance value (threshold)
- The curvature tolerance value (threshold)
- The info if curvature threshold is activated
- The maximum deviation accepted
- The info if maxcimum deviation is activated
- The fixed points
- The fixed segments
- The info if topology simplification is activated
Use the to create a HybridShapeCurveSmooth object.
Properties
-
Property CorrectionMode() As
-
Returns or sets the correction mode (threshold, point, tangency or curvature) applied to
the smoothed curve.
Legal values:
- 0
- CATGSMCSCorrectionMode_Threshold. no continuity
- 1
- CATGSMCSCorrectionMode_Point. continuity in point (C0).
- 2
- CATGSMCSCorrectionMode_Tangency. continuity in tangency (C1).
- 3
- CATGSMCSCorrectionMode_Curvature. continuity in curvature (C2).
Example:
This example retrieves in oMode the correction mode
for the hybShpCurveSmooth hybrid shape feature.
oMode = hybShpCurveSmooth.CorrectionMode
Property CurvatureThreshold() As
Returns or sets the CurvatureThreshold.
- Example:
This example retrieves the CurvatureThreshold of
the
hybShpCurveSmooth in CurvatureThH.
Dim CurvatureThH as double
CurvatureThH = hybShpCurvePar.CurvatureThreshold
Property CurvatureThresholdActivity() As
Returns or sets the CurvatureThresholdActivity.
- Example:
This example retrieves the CurvatureThresholdActivity of
the
hybShpCurveSmooth in CurvatureActivity .
Dim CurvatureActivity as boolean
CurvatureActivity = hybShpCurvePar.CurvatureThresholdActivity
Property CurveToSmooth() As
Returns or sets the curve to smooth.
- Example:
This example retrieves the curve to smooth object of
the
hybShpCurveSmooth in Curve.
Dim Curve as CATIAReference
Curve = hybShpCurvePar.CurveToSmooth
Property EndExtremityContinuity() As
Returns or sets the continuity condition (curvature, tangency or point) applied to
the smoothed curve with regard to the input curve at the end extremity of the input curve.
Legal values:
- 0
- CATGSMContinuity_Point. continuity in point (C0).
- 1
- CATGSMContinuity_Tangency. continuity in tangency (C1).
- 2
- CATGSMContinuity_Curvature. continuity in curvature (C2).
Example:
This example retrieves in oContinuity the continuity at the end extremity
for the hybShpCurveSmooth hybrid shape feature.
oContinuity = hybShpCurveSmooth.EndExtremityContinuity
Property MaximumDeviation() As (Read Only)
Returns the MaximumDeviation.
- Example:
This example retrieves the MaximumDeviation of
the
hybShpCurveSmooth in MaximumDeviationVal.
Dim MaximumDeviationVal as CATIALength
MaximumDeviationVal = hybShpCurvePar.MaximumDeviation
Property MaximumDeviationActivity() As
Returns or sets the MaximumDeviationActivity.
- Example:
This example retrieves the MaximumDeviationActivity of
the
hybShpCurveSmooth in MaxActivity .
Dim MaxActivity as boolean
MaxActivity = hybShpCurvePar.MaximumDeviationActivity
Property StartExtremityContinuity() As
Returns or sets the continuity condition (curvature, tangency or point) applied to
the smoothed curve with regard to the input curve at the start extremity of the input curve.
Legal values:
- 0
- CATGSMContinuity_Point. continuity in point (C0).
- 1
- CATGSMContinuity_Tangency. continuity in tangency (C1).
- 2
- CATGSMContinuity_Curvature. continuity in curvature (C2).
Example:
This example retrieves in oContinuity the continuity at the start extremity
for the hybShpCurveSmooth hybrid shape feature.
oContinuity = hybShpCurveSmooth.StartExtremityContinuity
Property Support() As
Returns or sets the support of the curve.
if Suppport == nothing no support associated to the curve
- Example:
This example retrieves the support of curve to smooth object of
the
hybShpCurveSmooth in Support.
Dim Support as CATIAReference
Support = ybShpCurveSmooth.Support
Property TangencyThreshold() As (Read Only)
Returns the TangencyThreshold.
- Example:
This example retrieves the curve to smooth object of
the
hybShpCurveSmooth in AngleThH.
Dim Curve as CATIAAngle
AngleThH = ybShpCurveSmooth.TangencyThreshold
Property TopologySimplificationActivity() As
Returns or sets the TopologySimplificationActivity.
- Example:
This example retrieves the TopologySimplificationActivity of
the
hybShpCurveSmooth in TopSimplifyAct.
Dim TopSimplifyAct as boolean
TopSimplifyAct = hybShpCurvePar.TogologySimplificationActivity
Methods
-
Sub AddFrozenCurveSegment( iCurve)
-
Adds a frozen curve to the hybrid shape curve smooth feature object.
- Parameters:
-
- iCurve
- The curve to be added to the hybrid shape curve smooth feature object.
- Example:
-
The following example adds the
iCurve curve to the
hybShpCurveSmooth object.
hybShpCurveSmooth.AddFrozenCurveSegment iCurve
Sub AddFrozenPoint( iPoint)
Adds a frozen points to the hybrid shape curve smooth feature object.
- Parameters:
-
- iPoint
- The frozen point to be added to the hybrid shape curve smooth feature object.
- Example:
-
The following example adds the
iPoint frozen point to the
hybShpCurveSmooth object.
hybShpCurveSmooth.AddFrozenPoint iPoint
Func GetFrozenCurveSegment( iPos) As
Retrieves the Frozen Curve Segment at specified position in the hybrid shape curve smooth object.
- Parameters:
-
- iPos
- The position of the Frozen Curve Segment to retrieve.
- Example:
-
The following example gets the
oCurve Frozen Curve Segment of the
hybShpCurveSmooth object at the position iPos.
Dim oCurve As Reference
Set oCurve = hybShpCurveSmooth.GetFrozenCurveSegment (iPos).
Func GetFrozenCurveSegmentsSize() As
Returns the number of frozen curve segments in the curve smooth object.
- Parameters:
-
- oSize
- Number of frozen curve segments in the curve smooth.
- Example:
-
This example retrieves the number of frozen curve segments.
in the
hybShpCurveSmooth hybrid shape curve smooth.
Dim oSize As long
oSize = hybShpCurveSmooth.GetFrozenCurveSegmentsSize
Func GetFrozenPoint( iPos) As
Retrieves the Frozen Point at specified position in the hybrid shape curve smooth object.
- Parameters:
-
- iPos
- The position of the Frozen Point to retrieve.
- Example:
-
The following example gets the
oPoint Frozen Point of the
hybShpCurveSmooth object at the position iPos.
Dim oPoint As Reference
Set oPoint = hybShpCurveSmooth.GetFrozenPoint (iPos).
Func GetFrozenPointsSize() As
Returns the number of Frozen Points in the curve smooth object.
- Parameters:
-
- oSize
- Number of Frozen Points in the curve smooth.
- Example:
-
This example retrieves the number of Frozen Points.
in the
hybShpCurveSmooth hybrid shape curve smooth.
Dim oSize As long
oSize = hybShpCurveSmooth.GetFrozenPointsSize
Sub RemoveAllFrozenCurveSegments()
Removes all Frozen Curve Segment of the hybrid shape curve smooth object.
Example:
The following example removes all Frozen Curve Segments of the hybShpCurveSmooth object.
hybShpCurveSmooth.RemoveAllFrozenCurveSegments
Sub RemoveAllFrozenPoints()
Removes all Frozen Points of the hybrid shape curve smooth object.
Example:
The following example removes all Frozen Points of the hybShpCurveSmooth object.
hybShpCurveSmooth.RemoveAllFrozenPoints
Sub RemoveFrozenCurveSegment( iCurve)
Removes Frozen Curve Segment from the list of Forzen curves in hybrid shape curve smooth object.
- Parameters:
-
- iCurve
- The Frozen Curve Segment to remove.
- Example:
-
The following example removes the Frozen Curve Segment from the
hybShpCurveSmooth object.
hybShpCurveSmooth.RemoveFrozenCurveSegment iCurve.
Sub RemoveFrozenPoint( iPoint)
Removes Frozen Point from the list of frozen points in hybrid shape curve smooth object.
- Parameters:
-
- iPoint
- The Frozen Point to remove.
- Example:
-
The following example removes the Frozen Point from the
hybShpCurveSmooth object.
hybShpCurveSmooth.RemoveFrozenPoint iPoint.
Sub SetMaximumDeviation( iMaxDeviation)
Sets the maximum deviation.
- Parameters:
-
- iMaxDeviation
- The maximium deviation
Sub SetTangencyThreshold( iTangencyThreshold)
Sets the tangency threshold.
- Parameters:
-
- iTangencyThreshold
- The tangency threshold