IDL API Master Index

F

FASReportingSettingAtt object: The interface to access a DNBIAFASReportingSettingAtt.
FTAInfraSettingAtt object: Represents the FT&A (Functional Tolerancing & Annotation) infrastructure setting controller object.
FTASettingAtt object: The interface to access a CATIAFTASettingAtt.
FabricWidth property in object CompositesMaterial: returns or set the fabric width defined in Composites tab in mm.
Face object: 2-D boundary.
FaceFillet object: Represents the face fillet shape.
FaceHLDrill property in object VisualizationSettingAtt: Returns the FaceHLDrill parameter.
FaceNumber property in object RenderingEnvironment: Returns or sets the spherical environment face number.
FaceToRemove property in object TritangentFillet: Returns the face to be removed by the tritangent fillet.
FaceType property in object PspPartConnector: Returns the face type (normal or "transparent" support) for this connector.
FacesToDraft property in object DraftDomain: Returns the faces to be drafted.
FacesToFillet property in object AutoFillet: Returns or sets the faces to fillet.
FacesToFillets property in object AutoFillet
FacesToRemove property in object Shell: Returns the collection of faces to be removed by the shell process.
FacesToThicken property in object Thickness: Returns the collection of faces to be thickened.
FacetManagers property in object FunctionalDocument: Returns the Facet Managers.
Factor property in object Scaling: Returns the scaling factor.
Factory object: Abstract object gathering behaviours of all objects being a factory.
Factory2D object: Interface to the factory for 2D objects.
Factory2D property in object Sketch: Returns the 2D factory of the sketch.
Factory2D property in object DrawingView: Returns the 2D factory of the drawing view.
Factory2D property in object Layout2DView: Returns the 2D factory of the Layout2D view.
FailItem method in object ExpertReportObjects: Retrieves a report failed component from a failed tuples collection, using its index or its name from the Check collection.
Failures property in object ExpertCheckRuntime: Returns the list of the tuples that don't satisfy this check.
FakeDimType property in object DrawingDimValue: Returns or sets fake dimension type of value.
FalloffExponent property in object RenderingLight: Changes the light falloff exponent.
Families property in object MaterialDocument: Returns the Family collection object from the current material document.
FamilyName property in object StrSection: Returns the parameter defining the family name.
FarLimit property in object Viewer3D: Returns or sets the far limit for the far clipping plane.
Fastener object
FastenerGroup object
FastenerGroups method in object FastenerWorkBench
FastenerSet object: Interface DELMIAFasteners DELMIAFasteners represent collection of fasteners of both types point and curve.
FastenerWorkBench object: Interface DELMIAFastenerWorkBench It is a utility class to get fasteners and groups from document.
FeatRemark property in object ManufacturingMachinableFeature: Returns the manufacturing machinable feature remark.
FeatType property in object ManufacturingMachinableFeature: Returns the manufacturing machinable feature type.
FeatureGenerator object: The interface to access a CATIAFeatureGenerator.
FeatureToLocatePositions property in object UserPattern: Returns the collection of feature to locate instances.
FeatureToLocatePositions property in object UserRepartition: Returns the collection of feature to locate instances.
Field method in object Roughness: Retrieves roughness field.
FieldOfView property in object Viewpoint3D: Returns or sets the field of view associated with the viewpoint.
FieldOfView property in object AnnotatedView: Returns the field of view associated with the annotated view.
FieldOutputRequests property in object ABQStep: Returns the ABQFieldOutputRequests container associated with the step.
Fields property in object ABQInitialStep: Returns the ABQFields container associated with the step.
Fields property in object ABQGeneralStaticStep: Returns the ABQFields container associated with the step.
Fields property in object ABQExplicitDynamicsStep: Returns the ABQFields container associated with the step.
FifthGuideCrv property in object HybridShapeSweepConic: Returns or sets the fifth guide curve.
File object: Represents the file object.
FileAccessStatisticsSettingAtt object: Interface for FileAccess statistic Controler Role: the FileAccess statistics controler manages the values of all or only a part of the attributes available for the thematic.
FileComponent object: Represents the file object.
FileExists method in object FileSystem: Returns whether a given file exists.
FilePath property in object DesignTable: Returns or sets the path of the design table (read/write property).
FileSearchOrder property in object Application: Returns or sets the default path concatenation.
FileSelectionBox method in object Application: Displays a modal dialog box which can be used to select / enter the name of a file to open / save.
FileSeparator property in object FileSystem: Returns the file separator string.
FileSystem object: Represents the file system object.
FileSystem property in object Application: Returns the file system.
Files object: A collection of all the file objects in a folder.
Files property in object Folder: Returns the file collection of the folder.
Fill property in object Marker2D: Returns or sets the Marker2D's filling status (1 the figure is filled, 0 the figure is not filled).
Fill property in object Marker3D: Returns or sets the marker 3D's filling status (1 the figure is filled, 0 the figure is not filled).
FillSelWithExtract method in object Group: Fills the selection with all products which can be extracted from the group.
FillSelWithInvert method in object Group: Fills the selection with all terminal node products which cannot be extracted from the group.
FillTwistedAreas property in object HybridShapeSweep: Returns or sets the fill twisted areas mode.
Fillet object: Represents the fillet shape.
FilletBoundaryRelimitation property in object Fillet: Returns or sets the fillet boundary relimitation mode.
FilletRadius property in object AutoFillet: Returns the Fillet radius.
FilletRepresentation property in object DrawingViewGenerativeBehavior: Returns or sets the view Fillet representation mode.
FilletSpine property in object VarRadEdgeFillet: Returns or set the spine for circle bitangency fillet.
FilletTrimSupport property in object Fillet: Returns or sets the fillet Trim Support mode.
FilletVariation property in object VarRadEdgeFillet: Returns or sets the edge fillet radius variation mode.
FilterCorrespondence method in object Selection: Specifies if the automation objects appearing as Value property of SelectedElement objects fit a given filter.
Filters property in object Defeaturing: Returns the filter collection of the Defeaturing.
FinalGatheringAccuracy property in object RenderingShooting: Returns or sets the number of rays shot in each final gather.
FinalGatheringMaxRadius property in object RenderingShooting: Returns or sets the maximum distance in which a final gather result can be used.
FinalGatheringMinRadius property in object RenderingShooting: Returns or sets the minimum distance in which a final gather result can be used.
FinalGatheringStatus property in object RenderingShooting: Returns or sets the final gathering status of shooting.
Finalize method in object DeviceSim: Cleans the WDM world.
FindInterface method in object SchWorkbench: This method returns an interface handle to an object.
FindInterface method in object ArrWorkbench: This method returns a interface handle as specified by the input interface name and the input interface handle.
FindObject method in object Selection: Finds an object in the current selection and deletes it from the selection.
FindObjectByName method in object Part: Finds an object that is not a collection by its name.
FindObsoleteClasses method in object SchObsoleteModel: Find obsolete base classes.
FindPaths method in object SchNetworkAnalysis: Given a start and end object in the network, this method returns a list of network objects each representing a path connecting the the 2 input objects.
Fingerprint method in object ExpertRuleBaseRuntime: Returns the Fingerprint information.
First property in object HybridShapePlane2Lines: Role: Get the first line.
First property in object HybridShapePlane3Points: Returns or sets the first point.
FirstAct property in object HtsCCPSettingAtt: Returns or sets the FirstAct parameter.
FirstAngle property in object Revolution: Returns the revolution first angle.
FirstAngleLaw property in object HybridShapeSweepCircle: Returns or sets the first angle law useful in some circular sweep types.
FirstAngleLawInversion property in object HybridShapeSweepCircle: Returns or sets the first angle law inversion information.
FirstComponentDirection property in object SolidCombine: Returns or sets the direction of first component of SolidCombine.
FirstComponentProfile property in object SolidCombine: Returns or sets the profile of first component of SolidCombine.
FirstContinuity property in object HybridShapeConnect: Gets or Sets the continuity on first curve.
FirstCurve property in object HybridShapeConnect: Gets or Sets the first reference curve.
FirstCurve property in object SfmMemberPlane2Curves: Returns or sets the first and second curve.
FirstCurvesConstraint property in object HybridShapeWrapCurve: Returns or sets constraint at first curves of the WrapCurve.
FirstDirection property in object HybridShapeCircleCtrRad: Returns or sets the first direction used to set the angles reference.
FirstDirection property in object HybridShapePointOnPlane: Returns or sets the first direction on the plane to compute the point (for stability).
FirstDirectionRepartition property in object RectPattern: Returns the linear repartition along the first direction.
FirstDirectionRow property in object RectPattern: Returns the position of the shape to be copied along the first linear direction.
FirstElem property in object HybridShapeTrim
FirstElem property in object HybridShapeCorner: Returns or sets the corner first reference element.
FirstElem property in object HybridShapeFilletBiTangent: Returns or Sets the first support surface feature.
FirstElem property in object HybridShapeFilletTriTangent: Returns or sets the first support surface feature.
FirstElement property in object HybridShapeRotate: Returns or sets the first element defining the rotation angle.
FirstFace property in object FaceFillet: Returns or sets the first limiting face.
FirstFace property in object TritangentFillet: Returns the first face limiting the tritangent fillet.
FirstGroup property in object Clash: Returns or sets the first group used by the computation.
FirstGroup property in object Distance: Returns or sets the first group used by the computation.
FirstGuideCrv property in object HybridShapeSweepLine: Returns or sets the sweep operation first guide curve.
FirstGuideCrv property in object HybridShapeSweepConic: Returns or sets the first guide curve.
FirstGuideCrv property in object HybridShapeSweepCircle: Returns or sets the sweep operation first guide curve.
FirstGuideCrv property in object HybridShapeSweepExplicit: Gets the first guide curve.
FirstGuideSurf property in object HybridShapeSweepLine: Returns or sets the sweep operation first guide surface.
FirstLawRelimiter property in object HybridShapeFilletBiTangent: Gets or sets Law first relimiter for variable shape fillet with law management.
FirstLengthLaw property in object HybridShapeSweepLine: Returns or sets the first length law useful in some linear sweep types.
FirstLengthLawInversion property in object HybridShapeSweepLine: Returns or sets whether the first length law has to be inverted.
FirstLimit property in object Prism: Returns the first prism limit (one of the two).
FirstLimit property in object AssemblyPocket: Returns the first pocket limit.
FirstLimitType property in object HybridShapeRevol: Returns or sets the First limit type.
FirstLimitType property in object HybridShapeExtrude: Returns or sets the First limit type.
FirstLink method in object DrawingViewGenerativeLinks: Returns the first link of the drawing view.
FirstMember property in object SfmMemberPlane2Curves: Returns or sets the first Member.
FirstOrientation property in object RectPattern: Returns or sets whether the pattern is built towards the first direction orientation.
FirstOrientation property in object HybridShapeTrim
FirstOrientation property in object HybridShapeCorner: Returns or sets the orientation of the corner first reference element.
FirstOrientation property in object HybridShapeConnect: Gets or Sets the orientation of first curve FirstOrientation = 1 : SameOrientation.
FirstOrientation property in object HybridShapeFilletBiTangent: Returns or Setsthe first orientation used to specify fillet center position.
FirstOrientation property in object HybridShapeFilletTriTangent: Returns or sets the first orientation used to specify fillet center position.
FirstPoint property in object HybridShapeRotate: Returns or sets the first point defining the rotation.
FirstPoint property in object HybridShapeConnect: Gets or Sets the first reference point.
FirstPoint property in object HybridShapeTranslate: Returns or sets the first point defining the translation.
FirstPoint property in object HybridShapePointBetween: Returns or sets the first reference point.
FirstProduct property in object Distance: Returns the product belonging to the first group that realizes the minimum distance.
FirstProduct property in object Conflict: Returns the first product involved in the conflict.
FirstRectangularPatternParameters property in object RectPattern: Returns or sets the rectangular pattern parameters required to define the pattern.
FirstSurface property in object SfmMemberSurfSurf: Returns or sets the SuperMember's first surface.
FirstSurfaceOffset property in object SfmMemberSurfSurf: Returns or sets the SuperMember's first surface offset.
FirstSurfaceOffsetParam property in object SfmMemberSurfSurf
FirstSurfaceOrientation property in object SfmMemberSurfSurf: Returns or sets the SuperMember's first surface orientation.
FirstTangentOrientation property in object HybridShapeCorner: Returns or sets the tangent orientation of the corner first reference element.
FirstTension property in object HybridShapeConnect: Returns the tension on the first curve making up the connect curve.
FirstUptoElem property in object Line: Role: Gets the First upto element of the line.
FirstUptoElement property in object HybridShapeRevol: Returns or sets the First up-to element used to limit Revolution.
FirstUptoElement property in object HybridShapeExtrude: Returns or sets the First up-to element used to limit extrusion.
FitAllInSheetFormat property in object Layout2DSettingAtt: Returns the FitAllInSheetFormat parameter.
FitAllInWall method in object RenderingEnvironmentWall: If a texture is mapped on the wall, scale automatically the texture to fit inside the wall.
FitToPrinterFormat property in object DraftingPageSetup: Fits the format of the print to the printer format.
FitToPrinterFormat property in object DrawingPageSetup: Fits the format of the print to the printer format.
FitToSheetFormat property in object DraftingPageSetup: Fits the format of the print to the sheet format.
FitToSheetFormat property in object DrawingPageSetup: Fits the format of the print to the sheet format.
FitUp property in object SfmWeld: Gets Fit Up.
FittingSettingAtt object: Interface to handle parameters of DMU Fitting Tools Options Tab page Role: This interface is implemented by a component which represents the controller of DMU Fitting Tools Options parameter settings.
FixTogether object: The object that manages a sequence of products or fixTogethers.
FixTogethers object: A collection of all the FixTogether objects contained in the product.
FixTogethersCount property in object FixTogether: Returns the number of FixTogether entities in the FixTogether.
FixedPart property in object Mechanism: Returns or sets the fixed part of the mechanism.
FixedText property in object WIText
FixedTimeIncrementMethod enum: Time increment methods for fixed time incrementation.
FixedTimeIncrementMethod property in object ABQExplicitDynamicsStep: Sets or returns the fixed time increment method.
FixtureGeometriesCount method in object ManufacturingSetup: Returns the number of fixture geometries from a Manufacturing Setup.
FlagNote object: Interface for the TPS Flag Note object.
FlagNote method in object Annotation: Get the annotation on the FlagNote interface.
FlagNote method in object Annotation2: Gets the annotation on the FlagNote interface.
FlagNoteText property in object FlagNote: Retrieves or sets Flag Text.
FlagText property in object Noa: Retrieves or sets Flag Text.
Flip method in object StrMember: Flips the section.
Flip method in object DrawingComponent: Flips the drawing component instance around X axis To flip around Y axis you have to flip the component around X and to add a rotation of 180 degrees.
Flip method in object SfmMember: Flip the member's section according to X axis.
FlipConnected method in object SchComponent: For component that is connected to another component or is inserted into a route.
FlipHorizontal method in object SchComponent: Mirror transform a component's image about the horizontal-axis centered at the local axis of the component.
FlipOnLine method in object SchComponent: Mirror the graphical object of this component.
FlipOverLine method in object SchRouteSymbol: Mirror the symbol over the route segment line on which the symbol is positioned.
FlipOverLine method in object SchAnnotationBreak: Mirror the symbol over the route segment line that ends in the connector on which the symbol is placed.
FlipOverOrthogonalLine method in object SchRouteSymbol: Mirror the symbol over the line orthogonal to the route segment line on which the symbol is positioned and going through the symbol's position point on that segment line.
FlipOverOrthogonalLine method in object SchAnnotationBreak: Mirror the symbol over the line orthogonal to the route segment line that ends in the connector on which the symbol is placed and going through the connector's position.
FlipSide property in object ABQAnalyticalRigidSurface: Sets or returns the flip state for the ARS.
FlipU property in object RenderingMaterial: Returns or sets the texture flip status along U axis.
FlipUStatus property in object RenderingEnvironmentWall: Returns or sets texture orientation status along the U axis.
FlipV property in object RenderingMaterial: Returns or sets the texture flip status along V axis.
FlipVStatus property in object RenderingEnvironmentWall: Returns or sets texture orientation status along the V axis.
FlipVertical method in object SchComponent: Mirror transform a component's image about the vertical-axis centered at the local axis of the component.
FlowCapability property in object PspCntrFlow: Returns or sets Flow capability of the connector.
FlowReality property in object PspCntrFlow: Returns or sets Flow reality of the connector.
Flush method in object ManufacturingOutput: Flush all Data in the Stream.
FlyCollisionMode property in object VisualizationSettingAtt: Returns the FlyCollisionMode parameter.
FlyCollisionSphereRadius property in object VisualizationSettingAtt: Returns the FlyCollisionSphereRadius parameter.
FlyCollisionType property in object VisualizationSettingAtt: Returns the FlyCollisionType parameter.
FlySensitivity property in object VisualizationSettingAtt: Returns the FlySensitivity parameter.
FlySpeed property in object VisualizationSettingAtt: Returns the FlySpeed parameter.
FlySpeedMode property in object VisualizationSettingAtt: Returns the FlySpeedMode parameter.
FocalDistance property in object Parabola2D
FocalDistance property in object SWKVision: Returns or sets the focal distance, in centimeters.
FocalPointX property in object SWKVision: Returns the x coordinate (in millimeters) of the focal point.
FocalPointY property in object SWKVision: Returns the y coordinate (in millimeters) of the focal point.
FocalPointZ property in object SWKVision: Returns the z coordinate (in millimeters) of the focal point.
FocusDistance property in object Viewpoint3D: Returns or sets the focus distance of the viewpoint.
Foggy property in object Viewer3D: Returns or sets the fog mode.
Folder object: Represents the folder object.
FolderExists method in object FileSystem: Returns whether a given folder exists.
Folders object: The folders object belongs to a folder.
FollowGroundAltitude property in object VisualizationSettingAtt: Returns the FollowGroundAltitude parameter.
FollowGroundMode property in object VisualizationSettingAtt: Returns the FollowGroundMode parameter.
FollowNodalRotation property in object ABQConcentratedForce: Sets or returns the follow nodal rotation flag.
FontName property in object DrawingTextProperties: Returns or sets the font name of the drawing text.
FontSize property in object DrawingTextProperties: Returns or sets the font size of the drawing text.
ForbidInconsistentSave property in object CDMASettingAtt: Retrieves or sets the enabling of forbidding inconsistent save.
ForbidNonCoplanarLines property in object HybridShapePlane2Lines: if ForbidNonCoplanarLines = TRUE, both lines have to be on the same plane.
ForceClearanceVoxel property in object N4DNavigatorSettingAtt
ForceUpdate method in object DrawingSheet: Forces the update of all the drawing views of the drawing sheet.
ForceUpdate method in object DrawingViewGenerativeBehavior: Forces the Update the drawing view even if not necessary.
ForceVoxel property in object N4DNavigatorSettingAtt
Form property in object ToleranceZone: Retrieves tolerance zone form.
FormatName property in object NumericalDisplayFormat: Retrieves or sets the format name.
Formula object: Represents the formula relation.
Formulation property in object ABQMechConnBehavior: Sets or returns the formulation in a mechanical connection.
FormulationOption property in object ABQFastenedPair: Sets or returns the formulation option.
FormulationOption property in object ABQSurfaceToSurfaceContact: Sets or returns the formulation option in a contact pair.
FormulationOption property in object ABQFastenedConnectionEnhancement: Sets or returns the formulation option.
FormulationOption_Type enum
Formulation_Type enum: Formulation types.
Forshortened property in object DrawingDimension: Returns or sets foreshortened mode or not.
FourthGuideCrv property in object HybridShapeSweepConic: Returns or sets the fourth guide curve.
Frame property in object Marker2D: Returns or sets the Marker2D's framing status (1 the figure is framed, 0 the figure is not framed).
Frame property in object Marker3D: Returns or sets the marker 3D's framing status (1 the figure is framed, 0 the figure is not framed).
Frame method in object ReferenceFrame: Retrieves Frame of the TPS.
FrameExtensions method in object SemanticGDT: Role: Gets the Auxiliary Features at given Index applied on GDT.
FrameType property in object DrawingText: Returns or sets the frame type of the drawing text.
FrameType property in object DrawingTextProperties: Returns or sets the frame type of the drawing text.
FrameVisibility enum
FrameVisualization property in object DrawingView: Returns or sets the drawing view frame visualization state.
FrameVisualization property in object Layout2DView: Returns or sets the Layout2D view frame visualization state.
Free method in object FunctionalFacet: Free the resources allocated by the Facet.
FreeEdgeOffset property in object SfmStiffenerOnFreeEdge: Returns or sets the SFE's Free Edge offset.
FreeParameter object: Interface to access a CATIAFreeParameter.
FreeParameters object: Interface to access a CATIAFreeParameters.
FreeParameters property in object Optimization: Returns the collection of the free parameters.
FreeSpace object
FreeSpaces object: Interface to compute Free Spaces.
FreeSpaces property in object OptimizerWorkBench: Returns FreeSpaces.
FreeState object: Interface for accessing Free State modifier on a TPS.
FreeState method in object Annotation: Get the annotation on the FreeState interface.
FreeState method in object SemanticGDT: Role: Returns the FreeState interface.
Freezed property in object ManufacturingMachinableArea: Returns the manufacturing machinable area freezed state.
Frequency property in object LicenseSettingAtt: Retrieves or Sets the contact frequency.
Frequency property in object SWKErgoCarry: Returns or sets the carry frequecy.
Frequency property in object SWKErgoPushPull: Returns or sets the push/pull frequecy.
Frequency property in object SWKErgoLiftLower: Returns or sets the lift frequecy.
FrequencyDataValues property in object ABQIAABQBaseMotionVB
FrequencyDataValues property in object ABQIAABQFrequencyLoadingVB
FrequencyIncrement property in object ABQMassScaling: Sets or returns the scaling frequency increment.
FrequencyInterval property in object ABQMassScaling: Sets or returns the scaling frequency interval.
FrequencyShift property in object ABQFrequencyStep: Returns or sets frequency shift value.
FrequencyType property in object ABQMassScaling: Sets or returns the scaling frequency type.
FrictionCoefficient property in object ABQMechConnBehavior: ets or returns the friction coefficient if the formulation is PENALTY.
From property in object HybridShapeBoundary: Removes or sets the ending limit(i.
From property in object FunctionalAction: Get the From object.
FromOrientation property in object HybridShapeBoundary: Gets or sets the Ending Limit Orientation (i.
FullName property in object Document: Returns the document's full file name, including its path.
FullName property in object Application: Returns the application's executable file full name, including its path.
FullName property in object SWKDOF: Returns the full name of the degree of freedom (e.
FullName property in object SWKBodyElement: Returns the full name of the body element.
FullName property in object SWKAnthroVariable: Returns the full name of the variable.
FullSceneAntiAliasingMode property in object VisualizationSettingAtt: Returns the AntiAliasingMode parameter.
FullScreen property in object Viewer: Returns or sets the state of a viewer to occupy the whole screen.
FunctActionsGroup object: The interface to access a group of functional actions in a system.
FunctActionsGroups object: The interface to access the groups of functional actions in a system.
FunctAssociation object: The interface to access a Functional Association.
FunctAssociations object: The interface to access a set of Functional Associations.
FunctFacetManagers object: Represents the Functional Facet's Managers.
FunctGenScriptMgr object: The interface to access a Functional GenerativeScripts manager.
FunctMultiRepMgr object: The interface to access a Functional Multi-Rep manager.
FunctNodeGraphLayout object: Represents a CATIAFunctNodeGraphLayout.
FunctScript object: The interface to access a Functional Script.
FunctScripts object: The interface to access a set of Functional Scripts.
FunctionStatus property in object PspFunctional: Returns function object status.
FunctionalAction object: The interface to access a Functional Action.
FunctionalActionPresentation property in object FunctionalSystemSettingAtt: Returns or sets the FunctionalActionPresentation parameter.
FunctionalActions object: The interface to access a collection of FunctionalActions.
FunctionalDescription object: The interface to access a Functional Description.
FunctionalDocument object: Represents a Functional Document.
FunctionalElement object: Represents a Functional Element.
FunctionalElement property in object FunctionalFacet: Get the Functional Element owning the Facet.
FunctionalFace property in object AutoDraft
FunctionalFace property in object AutoFillet
FunctionalFaces property in object AutoDraft: Returns or sets the functional faces.
FunctionalFaces property in object AutoFillet: Returns or sets the functional face.
FunctionalFacet object: The interface to access a Functional Facet.
FunctionalFacetMgr object: The interface to access a Functional Facet Manager.
FunctionalObject object: The interface to access a Functional Object.
FunctionalObjectProxy object: The interface to access a Functional ObjectProxy.
FunctionalObjects object: Interface to access a collection of FunctionalObjects.
FunctionalPosition object: Represents a Functional Position.
FunctionalSystemSettingAtt object: Enables attribute access to PFD options.
FunctionalVariant object: The interface to access a Functional Variant.
FunctionalVariants object: The interface to access a collection of FunctionalVariants.
filmCoeff property in object ABQFilmCondition: Sets or returns the reference film coefficient if the film condition is not temperature dependent.
format property in object DrawingPicture: Sets the picture format.