IDL API Master Index

A

A property in object HybridShapePlaneEquation: Gets A coefficient for plane equation.
ABND property in object ErrorlogStatisticsSettingAtt: Returns or sets the state ot the abend severity level field.
ABQAnalysisCase object: Represents an Abaqus analysis case (ABQAnalysisCase) object.
ABQAnalysisCases object
ABQAnalysisModel object: Represents the Abaqus analysis model object.
ABQAnalyticalRigidSurface object: Represents an Abaqus Analytical rigid surface (ABQAnalyticalRigidSurface) object.
ABQBoundaryCondition object: Represents the base interface for Abaqus boundary condition objects.
ABQBoundaryConditions object
ABQClampBC object: Represents an Abaqus clamp (ABQClamp) object.
ABQConcForceLoad_Type enum
ABQConcentratedForce object: Represents an Abaqus concentrated force object (ABQConcentratedForce).
ABQDamperConnectionProperty object: Represents an Abaqus Damper connection property (ABQDamper) object.
ABQDatOutputVarType enum
ABQDataOutputRequest object: Represents an Abaqus data output request (ABQDataOutputRequest) object.
ABQDataOutputRequests object
ABQDisplacementBC object: Represents an Abaqus displacement boundary condition (ABQDisplacementBC) object.
ABQDisplayGroup object: Represents an Abaqus display group (ABQDisplayGroup) object.
ABQDisplayGroups object
ABQEntityType enum
ABQExplicitDynamicsStep object: Represents an Abaqus explicit dynamics step (ABQExplicitDynamicsStep) object.
ABQFHOutputRequest object: Represents the base interface for field and history output request objects.
ABQFastenedConnectionEnhancement object: This interface has been deprecated.
ABQFastenedPair object: Represents an Abaqus Fastened Pair (ABQFastenedPair) object.
ABQFieldOutputRequest object: Represents an Abaqus field output request (ABQFieldOutputRequest) object.
ABQFieldOutputRequests object
ABQFields object
ABQFilmCondition object: Represents an Abaqus film condition (ABQFilmCondition) object.
ABQFrequencyStep object: Represents an Abaqus frequency step (ABQFrequencyStep) object.
ABQGasketProperty object
ABQGeneralStaticStep object: Represents an Abaqus general static step (ABQGeneralStaticStep) object.
ABQGlobalElementAssignment object: Represents an Abaqus Global Element assignment (ABQGlobalElementAssignment) object.
ABQGravity object: Represents an Abaqus gravity (ABQGravity) object.
ABQHeatTransferStep object: Represents an Abaqus heat transfer step (ABQHeatTransferStep) object.
ABQHistoryOutputRequest object: Represents an Abaqus history output request (ABQHistoryOutputRequest) object.
ABQHistoryOutputRequests object
ABQIAABQBaseMotionVB object: Interface representing xxx.
ABQIAABQFrequencyLoadingVB object: Interface representing xxx.
ABQIAABQSteadyStateLinDynStepBasicVB object: Interface representing xxx.
ABQIAABQSteadyStateLinDynStepModalVB object: Interface representing xxx.
ABQIAABQSteadyStateLinDynStepSubspaceVB object: Interface representing xxx.
ABQImageQuery object: Provides an image query object.
ABQInitialStep object: Represents an Abaqus initial step (ABQInitialStep) object.
ABQInitialTemperature object: Represents an Abaqus initial temperature object (ABQInitialTemperature).
ABQInteraction object: Represents the base interface for Abaqus interaction objects.
ABQInteractions object
ABQJob object: Represents an Abaqus job (ABQJob) object.
ABQJobs object: The collection of Abaqus (ABQJob) objects.
ABQLoad object: Represents the base interface for all load objects.
ABQLoads object
ABQLocalCsysType enum
ABQMassScaling object: Represents an Abaqus Mass Scaling entity.
ABQMassScalings object
ABQMechConnBehavior object: Represents an Abaqus mechanical connection behavior (ABQMechConnBehavior) object.
ABQOutputAtSecPts enum
ABQOutputRequest object: Represents the base interface for all output request objects.
ABQOutputRequestType enum
ABQOutputRequests object
ABQOutputVariableType enum
ABQPressure object: Represents an Abaqus pressure (ABQPressure) object.
ABQPretensionProperty object: Represents a pretension property (ABQPretensionProperty) object.
ABQProperties object
ABQProperty object: Represents the base interface for all Abaqus property objects.
ABQRequestedModesOption enum
ABQRestartOption enum
ABQRestartReadOption enum
ABQRestartReadStepSelOption enum
ABQRigidBodyConstraint object: Represents an Abaqus rigid body constraint (ABQRigidBodyConstraint) object.
ABQRigidCoupling object: Represents an Abaqus rigid coupling (ABQRigidCoupling) object.
ABQSmoothCoupling object: Represents an Abaqus smooth coupling (ABQSmoothCoupling) object.
ABQSmoothStepAmplitude object: Represents a smooth step amplitude (ABQSmoothStepAmplitude) object.
ABQSolutionCase object: Represents an Abaqus solution case (ABQSolutionCase) object.
ABQSolutionCaseImages object
ABQSolutionStep object: Represents an Abaqus solution step (ABQSolutionStep) object.
ABQSolutionStepImages object
ABQSolutionSteps object
ABQSpringConnectionProperty object: Represents an Abaqus spring connection property (ABQSpring) object.
ABQStep object: Represents a Abaqus analysis step (ABQStep) object.
ABQSteps object
ABQSurfaceToSurfaceContact object: Represents an Abaqus contact pair (ABQSurfaceToSurfaceContact) object.
ABQTabularAmplitude object: Represents a tabular amplitude (ABQTabularAmplitude) object.
ABQTemperature object: Represents an Abaqus temperature object (ABQTemperature).
ABQTemperatureBC object: Represents an Abaqus Temperature boundary condition (ABQTemperatureBC) feature.
ABQTemperatureHistory object: Represents an Abaqus temperature history object (ABQTemperatureHistory).
ABQThermalConnBehavior object: Represents an Abaqus thermal connection behavior (ABQThermalConnBehavior) object.
AMPPath object: This interface provides the methods to handle the feature AMPPath which is a list of AMPTags.
AMPTag object: This interface provides the methods to handle the feature AMPTag.
ARCTag object: Interface representing a Tag.
ARCTagGroup object: Interface representing a Tag.
ASNavigationMode property in object SimulationSettingAtt: Returns or sets the ASNavigationMode setting attribute value.
ASStepSize property in object SimulationSettingAtt: Returns or sets the ASStepSize setting attribute value.
AbqMsFrequencyType enum: Mass Scaling Frequency types.
AbqMsTargetMethod enum: Mass Scaling Target Method.
AbsoluteAxis property in object Sketch: Returns the 2D absolute axis of the sketch.
AccelColor property in object DevAnalysisSettingAtt: Returns or sets the AccelColor parameter.
AccelLimit property in object DevAnalysisSettingAtt: Returns or sets the AccelLimit parameter.
Acceleration property in object MoveHomeAct: This property returns and sets the Acceleration percentage for the move activity.
Acceleration property in object MoveJointsAct: This property returns and sets the Acceleration percentage for the activity.
AccelerationPercent property in object MoveToPostureActivity
AccesslogStatisticsSettingAtt object: Interface for Accesslog statistic Controler.
Accuracy property in object Distance: Returns or sets the accuracy value for the computation.
AccuracyType enum: Types of accuracy for the accuracy profile in robot controller.
AccuratePickingMode property in object VisualizationSettingAtt: Returns the AccuratePickingMode parameter.
AccuratePickingWindowSize property in object VisualizationSettingAtt: Returns the AccuratePickingWindowSize parameter.
AccurateType method in object ExpertRuleBaseRuntime: Returns as a string the type of component.
AccurateType method in object ExpertRuleBaseComponentRuntime: Returns as a string the type of component.
Actions property in object FunctionalDescription: Get the Actions collection.
ActionsCount property in object FunctActionsGroup: Get the count of actions referenced by the actions' group.
ActionsGroups property in object FunctionalDescription: Get the ActionsGroups collection.
Activate method in object Viewer: Activates the viewer in the window.
Activate method in object Window: Activates a window.
Activate method in object Document: Activates the document.
Activate method in object Part: Unsuppresses an object for the update process.
Activate method in object Constraint: Unsuppresses a constraint for the update process.
Activate method in object DrawingView: Activates the drawing view.
Activate method in object DrawingSheet: Activates the drawing sheet.
Activate method in object Behavior: Activates a behavior.
Activate method in object Layout2DView: Activates the Layout2D view.
Activate method in object Layout2DSheet: Activates the Layout2D sheet.
Activate method in object SchCompGraphic: To add a new image to an existing object.
Activate method in object KnowledgeActivateObject: Activates the relation.
Activate method in object ExpertRuleBaseComponentRuntime: Activates the RuleBaseComponent.
Activate2DMode property in object Layout2DSettingAtt: Returns the Activate2DMode parameter.
ActivateDefaultShape method in object Product: Activate default shape.
ActivateFrame method in object DrawingText: Activates the text frame of the drawing text.
ActivateFrame method in object DrawingTextProperties: Activates the text frame of the drawing text.
ActivateNext method in object Window: Activates the window following the current active one in the window collection.
ActivatePoint method in object ManufacturingPattern: Activates a point of a Manufacturing Pattern.
ActivatePosition method in object Pattern: Allows user to activate an instance of the pattern.
ActivatePrevious method in object Window: Activates the window preceding the current active one in the window collection.
ActivateShape method in object Product: Activate one shape.
Activated property in object KnowledgeActivateObject: Returns whether the relation is activated.
Activation property in object SceneProductData: Returns / Set the scene product's activation state.
Activation property in object DMUReview: Returns or sets the activation.
Activation property in object GeneralStatisticsSettingAtt: Returns or sets the activation state of the statistics thematic.
ActivationMode property in object CacheSettingAtt: Returns or sets the activation state of cache.
ActivationState property in object PrintArea: Activates or deactivates the print area.
ActivationState property in object MemoryWarningSettingAtt: Returns or sets the activation state of the memory warning mechanism.
ActivationState property in object DisconnectionSettingAtt: Returns or sets the activation state of automatic disconnection.
ActivationStatus property in object ABQLoad: Sets or returns the activation status.
ActivationStatus property in object ABQOutputRequest: Sets or returns the activation status.
ActivationStatus property in object ABQBoundaryCondition: Sets or Returns a boolean indicating whether the boundary condition is activated.
ActivationStatus property in object ABQTemperatureHistory: Sets or returns the activation status.
Active property in object SWKIKConstraint: Returns or sets the constraint activity.
Active property in object ManufacturingActivity: Returns the activation state of the activity.
ActiveCamera property in object RenderingShooting: Returns or sets the active camera for shooting.
ActiveDocument property in object Application: Returns the active document.
ActiveEnvironment property in object RenderingShooting: Returns or sets the active environment for shooting.
ActiveLineOfSight property in object SWKVision: Returns the active line of sight, according to the vision type.
ActivePrinter property in object Application: Returns or sets the active printer.
ActiveSheet property in object DrawingRoot: Retrieves or sets the active sheet of the drawing.
ActiveSheet property in object DrawingSheets: Returns the active drawing sheet of the drawing document.
ActiveSheet property in object Layout2DRoot: Retrieves or sets the active sheet of the layout.
ActiveSheet property in object Layout2DSheets: Returns the active Layout sheet of the Layout document.
ActiveSide property in object SWKVision: Returns the vision active side.
ActiveStatus property in object RenderingLight: Returns or sets the light active status.
ActiveStatus property in object RenderingEnvironment: Returns or sets the environment active status.
ActiveStatus property in object RenderingEnvironmentWall: Returns or sets the environment wall active status.
ActiveTask object: Represents the Active task of the resource in conjunction with a particular activity.
ActiveView property in object Capture: Retrieves the active view for the capture.
ActiveView property in object AnnotationSet: Gets or Sets Annotation Set ActiveView.
ActiveView property in object DrawingViews: Returns the active drawing view of the active drawing sheet.
ActiveView property in object Layout2DViews: Returns the active Layout2D view of the active Layout2D sheet.
ActiveViewState property in object Capture: Retrieves the Active View state, saved or Not.
ActiveViewer property in object Window: Returns the active viewer in the window.
ActiveWindow property in object Application: Returns the active window.
Activities object: The collection of activities related to the current activity.
Activities property in object ManufacturingProgram: Give the List of Activities linked to a Manufacturing Program.
Activity object: The object that represents an activity.
Activity property in object AnalysisMeshPart: Returns the activity of an meshpart.
AdaptiveCoeff property in object RenderingMaterial: Returns or sets the adaptive coeffcient of a material.
AdaptivityManager property in object AnalysisModel: Returns the AdaptivityManager defined on the analysis model.
Add object: Represents the add, or union boolean operation.
Add method in object Items
Add method in object PartComps: Computes a new comparison between products.
Add method in object Wrappings: Compute a wrapping on the selected products.
Add method in object Selection: Creates a SelectedElement object which Value property is the given automation object, and adds it to the selection.
Add method in object Documents: Creates a Document object and adds it to the documents collection.
Add method in object FreeSpaces: Compute a free space around a selected product.
Add method in object DMOOffsets: Creates a new Offset and adds it to the DMOOffsets collection.
Add method in object Outputs
Add method in object PPRProducts: Adds the specified Product to the current list of Products.
Add method in object Bodies: Creates a new body and adds it to the Bodies collection.
Add method in object Silhouettes: Creates a new Silhouette and adds it to the Silhouettes collection.
Add method in object ABQJobs: Creates a new Abaqus job and adds it to the collection of Abaqus jobs.
Add method in object Resources
Add method in object LightSources: Adds a new light source to the LightSources collection.
Add method in object ABQLoads: Creates a new Abaqus load and adds it to the collection of Abaqus loads.
Add method in object SweptVolumes: Creates a new SweptVolume and adds it to the SweptVolumes collection.
Add method in object ABQSteps: Creates a new Abaqus Step and adds it to the collection of Abaqus steps.
Add method in object Sketches: Creates a new sketch and adds it to the sketch collection.
Add method in object Activities
Add method in object ABQFields: Creates a new Abaqus field and adds it to the collection of Abaqus fields.
Add method in object Materials: Adds a new material to the material collection.
Add method in object Sampleds: Creates a new Sampled object and adds it to the Sampleds collection.
Add method in object Shuttles: Creates a new Shuttle and adds it to the Shuttles collection.
Add method in object DMOThicknesses: Creates a new Silhouette and adds it to the DMOThicknesses collection.
Add method in object Annotations: Add an Annotation.
Add method in object List: Adds an item at the end of the list.
Add method in object AxisSystems: Creates a new AxisSystem and adds it to the AxisSystems collection.
Add method in object HybridBodies: Creates a new hybrid body and adds it to the HybridBodies collection.
Add method in object FixTogethers: Creates a new FixTogether and adds it to the FixTogethers collection.
Add method in object Groups: Creates an empty Group and adds it to the Groups Collection.
Add method in object ABQProperties: Creates a new Abaqus Property and adds it to the collection of Abaqus Properties.
Add method in object DrawingGDTs: Creates a drawing GDT and adds it to the drawing GDTs collection.
Add method in object Joints: Create a new Joint and adds it to the Joints collection.
Add method in object DMUReviews: Creates a DMUReview and adds it to the DMUReviews Collection.
Add method in object Hyperlinks: Adds a Hyperlink to the Hyperlinks collection.
Add method in object DrawingViews: Creates a drawing view and adds it to the drawing view collection.
Add method in object Dressups: Creates a new Dressup and adds it to the Dressups collection.
Add method in object DrawingTexts: Creates a drawing text and adds it to the DrawingTexts collection.
Add method in object ABQMassScalings
Add method in object RenderingLights: Adds a new light to the lights collection.
Add method in object ABQInteractions: Creates a new Abaqus interaction and adds it to the collection of Abaqus Interactions.
Add method in object DrawingTables: Creates a drawing table and adds it to the DrawingTables collection.
Add method in object DrawingSheets: Creates a drawing sheet and adds it to the DrawingSheets collection.
Add method in object DrawingArrows: Creates a drawing arrow and adds it to the DrawingArrows collection.
Add method in object Mechanisms: Creates a new Mechanism and adds it to the Mechanisms collection.
Add method in object MaterialFamilies: Adds a new material family to the MaterialFamilies collection.
Add method in object ABQAnalysisCases: Creates a new Abaqus analysis case and adds it to the collection of Abaqus analysis cases.
Add method in object DrawingLeaders: Creates a drawing leader and adds it to the DrawingLeaders collection.
Add method in object DrawingThreads: Creates a drawing thread and adds it to the DrawingThreads collection.
Add method in object DefeaturingFilters: Creates a new filter and adds it to the Defeaturing filters collection.
Add method in object DrawingWeldings: Creates a drawing welding and adds it to the drawing weldings collection.
Add method in object DrawingPictures: Inserts a drawing picture in the drawing view and adds it to the DrawingPictures collection.
Add method in object ABQOutputRequests: Creates a new Abaqus output request and adds it to the collection of Abaqus output requests.
Add method in object AnnotatedViews: Creates an annotated view using the current viewpoint and adds it to the AnnotatedView collection.
Add method in object FunctActionsGroup: Adds an action to the actions' group.
Add method in object Clashes: Creates a Clash object which takes all products into account and adds it to the Clashes collection.
Add method in object RenderingShootings: Adds a new shooting to the shootings collection.
Add method in object AnalysisSets: Creates a new analysis set and adds it to the analysis sets collection.
Add method in object Inertias: Creates an Inertia object from an object and adds it to the Inertias collection.
Add method in object Sections: Creates a Section object which takes all products of the documents into account and adds it to the Sections collection.
Add method in object Layout2DSheets: Creates a Layout sheet and adds it to the Layout2DSheets collection.
Add method in object AnalysisCases: Creates a new case and adds it to the case collection.
Add method in object Distances: Creates a Distance object which takes all products of the document into account and adds it to the Distances collection.
Add method in object DrawingDimensions: Creates a drawing dimension and adds it to the DrawingDimensions collection.
Add method in object DrawingComponents: Creates a drawing component instance and adds it to the DrawingComponents collection.
Add method in object AnalysisImages: Creates a new image and adds it to the analysis image collection.
Add method in object MechanismCommands: Creates a new MechanismCommand and adds it to the MechanismCommands collection.
Add method in object ABQBoundaryConditions: Creates a new Abaqus boundary condition and adds it to the collection of Abaqus boundary conditions.
Add method in object AnalysisEntities: Creates a new analysis entity and adds it to the analysis entities collection.
Add method in object MfgActivities: This method adds the specified CATIAManufacturingActivity in the current list CATIAMfgActivities.
Add method in object RenderingEnvironments: Adds a new environment to the environments collection.
Add method in object ABQDataOutputRequests: Creates a new Abaqus data output request and adds it to the collection of Abaqus data output requests.
Add method in object AnalysisMeshParts: Creates a new meshpart and adds it to the meshpart collection.
Add method in object MfgToolMotions: This method adds the specified CATIAManufacturingToolMotion in the current list CATIAMfgToolMotions.
Add method in object OrderedGeometricalSets: Creates a new ordered geometrical set and adds it to the OrderedGeometricalSets collection.
Add method in object ABQFieldOutputRequests: Creates a new Abaqus field output request and adds it to the collection of Abaqus field output requests.
Add method in object Publications: Adds a publication object to the product and returns a pointer to the publication object.
Add method in object SfmReferences: Adds a reference in the collection.
Add method in object ABQHistoryOutputRequests: Creates a new Abaqus history output request and adds it to the collection of Abaqus history output requests.
Add method in object AnalysisLocalEntities: Creates a new analysis local entity and adds it to the analysis entities collection.
Add method in object AnalysisOutputEntities: Creates a new analysis entity and adds it to the analysis entities collection.
Add method in object ManufacturingFeatures: Create and Add a Manufacturing Feature of a specified type to the Collection.
Add method in object AnalysisMeshLocalSpecifications: Creates a new local specification and adds it to the local specification collection.
Add2 method in object DrawingDimensions: Creates a drawing dimension along a direction and adds it to the DrawingDimensions collection.
Add2DArrow method in object Marker2Ds: Creates an arrow marker 2D and adds it to the marker 2D collection.
Add2DCircle method in object Marker2Ds: Creates a circle marker 2D and adds it to the marker 2D collection.
Add2DFreeHand method in object Marker2Ds: Creates a free hand drawing marker 2D and adds it to the marker 2D collection.
Add2DLine method in object Marker2Ds: Creates a line marker 2D and adds it to the marker 2D collection.
Add2DPicture method in object Marker2Ds: Creates a picture marker 2D and adds it to the marker 2D collection.
Add2DRectangle method in object Marker2Ds: Creates a rectangle marker 2D and adds it to the marker 2D collection.
Add2DText method in object Marker2Ds: Creates a text marker 2D and adds it to the marker 2D collection.
Add3DPosition method in object DNB3DState: Adds the specified 3D Position to the given 3D state as a child.
Add3DState method in object DNB3DState: Adds the specified 3D state to the given 3D state as a child.
Add3DText method in object Marker3Ds: Creates a text marker 3D and adds it to the marker 3D collection.
AddAccuracyProfile method in object RobGenericController: Add a new Accuracy Profile into controller.
AddActiveLight method in object RenderingShooting: Adds a new active light to the shooting active lights list.
AddActivityConstraint method in object Activity
AddAdvSuperPlate method in object SfmFactory: Creates an advanced SuperPlate.
AddAffectedComponent method in object AssemblyFeature: Adds a component to the affected component list.
AddAlternateGraphic method in object SchRouteAlternateGraphic: Add an alternate graphical primitive to a route.
AddArea method in object ArrangementAreas: Creates a ArrangementArea and adds it to the collection.
AddAroundAny method in object FreeSpaces: Compute a free space around any products.
AddAroundProducts method in object FreeSpaces
AddAssemblyAdd method in object AssemblyFeatures: Creates a new AssemblyBoolean object by adding a body to the assembly.
AddAssemblyHole method in object AssemblyFeatures: Creates a new AssemblyHole object.
AddAssemblyPocket method in object AssemblyFeatures: Creates a new AssemblyPocket object.
AddAssemblyRemove method in object AssemblyFeatures: Creates a new AssemblyBoolean object by removing a body from the assembly.
AddAssemblySplit method in object AssemblyFeatures: Creates a new AssemblySplit object.
AddAssociation method in object DesignTable: Adds an association between a parameter iParameter and a column of the design table.
AddAttr method in object Activity: Adds attribute to an Activity.
AddAttributeReal method in object AMPTag: Function to add real attribute on the given AMPTag.
AddAttributeString method in object AMPTag: Function to add string attribute on the given AMPTag.
AddAuxAttribute method in object AMPTag: Function to add an auxilliary attribute to the given AMPTag.
AddAuxiliary method in object Layout2DViews: Creates a section or section-cut or auxiliary View2DL from a given Layout View2DL.
AddBiEltCst method in object Constraints: Creates a new constraint applying to two geometric elements and adds it to the Constraints collection.
AddBodyToHeal method in object HybridShapeHealing: Adds the body to be healed to the list.
AddBound method in object HybridShapeFill: Adds an boundary to the hybrid shape fill feature object.
AddBoundary method in object ArrangementBoundaries: Creates an ArrangementBoundary and adds it to the collection.
AddBoundaryElement method in object SchGRRZone: Add a boundary element to the zone.
AddByAssignmentType method in object Items
AddByAssignmentType method in object Resources
AddCSOIntoSelectionSet method in object SelectionSets: Adds CSO's content in a Selection Set.
AddCentreOfRotation method in object ABQIAABQBaseMotionVB
AddClearance method in object ManufacturingOperation: Add a 'clearance to a plane' path to a Manufacturing Operation.
AddColumn method in object DrawingTable: Adds a column before the indicated column.
AddCommand method in object Mechanism: Adds a command in the mechanism, on a joint.
AddComponent method in object Products: Creates a component and adds it to the Products collection.
AddComponentsFromFiles method in object Products: Creates a component for each file.
AddCompositeDampingDataTable method in object ABQIAABQSteadyStateLinDynStepModalVB: Adds a composite damping data over ranges of Modes or Frequencies The number of values in both the parameters must match.
AddConnector method in object PspPhsyicalProduct: Returns the added connector on the object.
AddConnector method in object SchCompConnector: Add a connector.
AddConstraint method in object HybridShapeExtractMulti
AddConstraint method in object SWKIKManager: Add a constraint with the given end effector.
AddConstraint method in object MoveToPostureActivity
AddConstraint method in object OptimizationConstraints: Adds a optimization constraint.
AddConstraintFrom method in object SWKIKManager: Add a new constraint identical to the one given.
AddConstraintTolerant method in object HybridShapeExtractMulti: Adds a constraint to the list of Extracted Elements.
AddCopyScene method in object Scenes: Creates a scene from another and adds it to the Scenes collection.
AddCorrector method in object ManufacturingTool: Adds a corrector to a Manufacturing tool.
AddCutPoints method in object HybridShapeSweep: Sets two cut points on the master guide.
AddCutoutWithAfterFormingMode method in object StrFeatureFactory: Adds a Cutout Feature on Plate/Member using AfterForming Mode.
AddCutoutWithBeforeFormingMode method in object StrFeatureFactory: Adds a Cutout Feature on Plate/Member using BeforeForming Mode.
AddCuttingElem method in object HybridShapeSplit: Adds a cutting feature.
AddDefExtFromCoordinates method in object StrObjectFactory: Creates a member extremity definition object from coordinates and an offset value.
AddDefExtFromReference method in object StrObjectFactory: Creates a member extremity definition object from an existing object in the model and an offset value.
AddDefExtOnMember method in object StrObjectFactory: Creates a member extremity definition object from another member object, its side, a distance on it and an offset.
AddDetail method in object DrawingSheets: Creates a detail drawing sheet and adds it to the DrawingSheets collection.
AddDetail method in object Layout2DViews: Creates a detail view and adds it to the layout view collection.
AddDetail method in object Layout2DSheets: Creates a detail Layout sheet 2DL and adds it to the LayoutSheets2DL collection.
AddDimMember method in object StrObjectFactory: Creates a dimension member object from a point and a mathematical definition of a direction.
AddDimMemberOnPlane method in object StrObjectFactory: Creates a dimension member object on a plane following a mathematical definition of a plane.
AddDimMemberPtPt method in object StrObjectFactory: Creates a dimension member object from two given points.
AddDimMemberWithSupport method in object StrObjectFactory: Creates a dimension member object using a support object.
AddDirectDampingDataTable method in object ABQIAABQSteadyStateLinDynStepModalVB: Adds a direct damping data over ranges of Modes or Frequencies The number of values in all the three of the parameters must match.
AddDistanceAlongAlineMotion method in object ManufacturingOperation: Add a path 'distance along a line' to a Manufacturing Operation.
AddDistanceAlongAlineMotionFeed method in object ManufacturingOperation: Add a path 'distance along a line' with Feedrate info to a Manufacturing Operation.
AddDistanceAlongAxis method in object ManufacturingOperation: Add a path 'distance along axis' to a Manufacturing Operation.
AddDistanceAlongAxisFeed method in object ManufacturingOperation: Add a path 'distance along axis' with Feedrate info to a Manufacturing Operation.
AddDraftAngleDefinitionLocation method in object HybridShapeSweepLine: Adds a draft angle location.
AddDropOffView method in object SchDropOffView: Adds a drafting view to the schematics diagram.
AddDynamicConnector method in object SchCompConnector: Add a dynamic connector.
AddEdgeToFillet method in object VarRadEdgeFillet: Adds a new edge to the variable radius edge fillet.
AddEdgeToKeep method in object EdgeFillet: Adds a new edge to keep by the filleting operation.
AddEdgeToKeepSharp method in object HybridShapeHealing: Adds the edge to be kept sharp while healing, to the list.
AddEdgeToTear method in object HybridShapeUnfold: Adds an edge to tear.
AddElement method in object HybridShapeAssemble: Adds an element to the hybrid shape assemble feature object.
AddElementToChamfer method in object Chamfer: Adds a new geometrical element to be chamfered.
AddElementToKeep method in object HybridShapeTrim: Adds an element to specifications.
AddElementToKeep method in object HybridShapeSplit: Adds an element to specifications.
AddElementToRemove method in object HybridShapeTrim: Adds an element to specifications.
AddElementToRemove method in object HybridShapeSplit: Adds an element to specifications.
AddElementToTransfer method in object HybridShapeUnfold: Appends an element to transfer.
AddElementsToFreeze method in object HybridShapeHealing: Adds the body to be freezed while healing, to the list.
AddEndcut method in object SfmProfile: Creates Endcut on a SuperProfile.
AddExistingCase method in object AnalysisCases: Adds an existing analysis case to the analysis cases collection.
AddExistingCaseForReport method in object AnalysisPostManager: Adds an existing analysis case to manager.
AddExistingSet method in object AnalysisSets: Adds an existing analysis set to the analysis sets collection.
AddExplicit method in object Group: Adds a product to the group.
AddExtension method in object SchematicExtension: Adds a Schematic extension to an application object.
AddExternalComponent method in object Products: Creates a component from the root product of another ProductDocument object.
AddFaceToDraft method in object DraftDomain: Adds a face to those to be drafted.
AddFaceToKeep method in object Trim: Adds a new face to be kept (if face is not divided by operation).
AddFaceToKeep2 method in object Trim: Adds a new face to be kept (if face is divided by operation).
AddFaceToRemove method in object Trim: Adds a new face to be Removed (if face not divided by operation).
AddFaceToRemove method in object Shell: Adds a new face to those to be removed by the shell process.
AddFaceToRemove2 method in object Trim: Adds a new face to be Removed (if face is divided by operation).
AddFaceToThicken method in object Thickness: Adds a new face to be thickened.
AddFaceWithDifferentThickness method in object Shell: Adds a new face to be thicken with different offset values.
AddFaceWithDifferentThickness method in object Thickness: Adds a new face to thicken with a different offset value.
AddFact method in object ExpertRuleBaseRuntime: Adds new fact to the rule base resolution.
AddFeatureToLocatePositions method in object UserPattern: Adds a new feature to locate instances.
AddFeatureToLocatePositions method in object UserRepartition: Adds a new feature to locate instances.
AddFile method in object SendToService: Adds a file to the list of the files 'to be copied'.
AddFillPoints method in object HybridShapeSweep: Sets two fill points on the master guide.
AddFixTogether method in object FixTogether: Add a fixTogether to a FixTogether.
AddFixture method in object ManufacturingSetup3
AddFormalParameter method in object Law: Creates a formal parameter for the law.
AddFreeParameter method in object FreeParameters: Adds a free parameter.
AddFrequencyDataTable method in object ABQIAABQSteadyStateLinDynStepBasicVB: Adds a list of frequency, real and imaginary The number of values in all the four of the parameters must match.
AddFrom3DPlane method in object Layout2DViews: Creates a viewFrom3D View2DL with the given 3Dplane as its view plane at the given position in the given Sheet2DL.
AddFromFile method in object FreeSpaces: Compute a free space from a file.
AddFromFile method in object Tracks: Creates a track in the collection, from information from an external file.
AddFromSel method in object Sampleds: Creates a new Sampled from the selection and adds it to the Sampleds collection.
AddFromSel method in object Shuttles: Creates a new Shuttle from the selection and adds it to the Shuttles collection.
AddFromSel method in object Groups: Creates a Group containing all products in the selection and adds it to the Groups Collection.
AddFromSel method in object Clashes: Creates a Clash object which takes all products in the selection into account and adds it to the Clashes collection.
AddFromSel method in object Sections: Creates a Section object which takes all products in the selection into account and adds it to the Sections collection.
AddFromSel method in object Distances: Creates a Distance object which takes all products in the selection into account and adds it to the Distances collection.
AddFromSweptAble method in object SweptVolumes: Creates a new SweptVolume and adds it to the SweptVolumes collection.
AddFromViewpoint method in object AnnotatedViews: Creates an annotated view using a given viewpoint and adds it to the AnnotatedView collection.
AddFromXML method in object ClashResults: Creates a ClashResult object from a XML file and adds it to the ClashResults collection.
AddFrozenCurveSegment method in object HybridShapeCurveSmooth: Adds a frozen curve to the hybrid shape curve smooth feature object.
AddFrozenPoint method in object HybridShapeCurveSmooth: Adds a frozen points to the hybrid shape curve smooth feature object.
AddGapConductionTable method in object ABQThermalConnBehavior: Adds a gap-conductance table using three lists containing gap, conductance, and temperature values.
AddGlobalDamping method in object ABQIAABQSteadyStateLinDynStepBasicVB: Returns or sets Global Damping values.
AddGotoHorizontal method in object ManufacturingOperation: Add a path 'goto horizontal' to a Manufacturing Operation.
AddGotoPoint method in object ManufacturingProgram: Add a Goto Point Operation to a Manufacturing Program.
AddGotoPointfromCoordinates method in object ManufacturingProgram: Add a Goto Point Operation to a Manufacturing Program.
AddGraphicalPrimitive method in object SchCntrGraphic: Add a graphical primitive to a connector.
AddGraphicalPrimitive method in object SchRouteGraphic: Add a graphical primitive to a route.
AddGraphicalRepresentation method in object SchCompGraphic: Add a graphical representation to a component.
AddGraphicalRepresentation method in object SchZoneGraphic: Add a graphical representation to a zone.
AddGuide method in object HybridShapeLoft: Adds a guide curve to the lofted surface.
AddGuide method in object HybridShapeSpine: Adds a guide to the spine curve.
AddGuideWithTangent method in object HybridShapeLoft: Adds a guide curve and a tangent surface to the lofted surface.
AddHull method in object SfmManager: Add the Hull feature according to the PRM resources.
AddImposedVertex method in object VarRadEdgeFillet: Adds a new control couple.
AddInAProduct method in object AnnotationSets: Add a set in the product.
AddInflatingFromFile method in object FreeSpaces: Compute an inflating free space from a file.
AddInstance method in object InstanceFactory: Creates a new instance of a shape or hybrid shape.
AddInternalFlow method in object SchCompFlow: Add an internal flow to a component.
AddInternalFlowSpecifyGRR method in object SchCompFlow: Add an internal flow to a component.
AddInterrupt method in object DrawingDimExtLine: Add an interrupt to an extension line.
AddInterruption method in object DrawingArrow: Add an interruption to an arrow.
AddInterruption method in object DrawingLeader: Add an interruption to an leader.
AddItemReservation method in object ArrangementItemReservations: Creates an ArrangementItemReservation and adds it to the collection.
AddJoint method in object Mechanism: Adds a joint in the mechanism.
AddLeader method in object Annotation: Add a leader.
AddLeader method in object Annotation2: Adds a leader.
AddLibrary method in object ProcessDocument: Adds a new library to the current Process document.
AddLimit method in object SfmSuperPlate: Adds one object to the list of connected object.
AddLink method in object DrawingViewGenerativeLinks: Adds a link to the drawing view.
AddMachinableGeometry method in object ManufacturingMachinableArea: Adds a machinable geometry to the list.
AddMasterShapeRepresentation method in object Product: Adds the master shape representation to the product.
AddMeToBuffer method in object ManufacturingOutputGenerator: Management of specific buffer for aligned points elimination.
AddMember method in object PspGroup: Adds a member to the group.
AddMember method in object StrObjectFactory: Creates a member object.
AddMember method in object SchComponentGroup: Add a member to the component group.
AddMemberBeamsAndPlane method in object SfmFactory: Creates a Member between two existing members using Plane.
AddMemberCrv method in object SfmFactory: Creates a SuperMember on a curve.
AddMemberCrvOnRef method in object SfmFactory: Creates a SuperMember on a curve and on a reference surface.
AddMemberFromDir method in object StrObjectFactory: Creates a member object using a direction object as a line or a plane.
AddMemberFromMathDir method in object StrObjectFactory: Creates a member object using a mathematical definition of the direction.
AddMemberFromMathPlane method in object StrObjectFactory: Creates a member object from a mathematical definition of a plane.
AddMemberOnSupport method in object StrObjectFactory: Creates a member object on a given support.
AddMemberOnSupportWithRef method in object StrObjectFactory: Creates a member object on a given support object and a surface used to define the orientation of the section.
AddMemberPtLength method in object SfmFactory: Creates a straight SuperMember defined by a point, a direction and a length.
AddMemberPtOnCrvPt method in object SfmFactory: Creates a straight SuperMember between a point on curve and a point.
AddMemberPtOnCrvPtOnCrv method in object SfmFactory: Creates a straight SuperMember between two points on curve.
AddMemberPtPt method in object SfmFactory: Creates a straight SuperMember between two points.
AddMemberPtPtOnCrv method in object SfmFactory: Creates a straight SuperMember between a point and a point on curve.
AddMemberPtUpToLimit method in object SfmFactory: Creates a straight member defined by a point, a direction and a limit.
AddMemberSurfSurf method in object SfmFactory: Creates a SuperMember by the intersection of two surfaces.
AddMonoEltCst method in object Constraints: Creates a new constraint applying to a single geometric element and adds it to the Constraints collection.
AddMotionGoToAPoint method in object ManufacturingOperation: Add a path 'goto a point' to a Manufacturing Operation.
AddMotionGoToAPointFeed method in object ManufacturingOperation: Add a path 'goto a point' with Feedrate info to a Manufacturing Operation.
AddMotionProfile method in object RobGenericController: Add a new Motion Profile into controller.
AddMotionToAPlane method in object ManufacturingOperation: Add a path 'goto a plane with axial or perpendicular move' to a Manufacturing Operation.
AddNew3DCorner method in object HybridShapeFactory: Creates a new 3D Corner within the current body.
AddNew3DCurveOffset method in object HybridShapeFactory: Creates a 3D Curve Offset.
AddNewAdd method in object ShapeFactory: Creates and returns a new add operation within the current body.
AddNewAffinity method in object HybridShapeFactory: Creates a new Affinity within the current body.
AddNewAffinity2 method in object ShapeFactory: Creates and returns a Affinity feature.
AddNewAssemble method in object ShapeFactory: Creates and returns a new assembly operation within the current body.
AddNewAutoDraft method in object ShapeFactory: Creates and returns a new solid autodraft.
AddNewAutoFillet method in object ShapeFactory: Creates and returns a new solid autofillet.
AddNewAxisLine method in object HybridShapeFactory: Creates a new AxisLine within the current body.
AddNewAxisToAxis method in object HybridShapeFactory: Creates a new axis to axis transformation within the current body.
AddNewAxisToAxis2 method in object ShapeFactory: Creates and returns an AxisToAxis transformation feature.
AddNewBlend method in object ShapeFactory: Creates and returns a new Blend feature.
AddNewBlend method in object HybridShapeFactory: Creates a new blend surface within the current body.
AddNewBoundary method in object HybridShapeFactory: Creates a new Boundary within the current body.
AddNewBoundaryOfSurface method in object HybridShapeFactory: Creates a Boundary within the current body.
AddNewBump method in object HybridShapeFactory: Creates a new Bump within the current body.
AddNewChamfer method in object ShapeFactory: Creates and returns a new chamfer within the current body.
AddNewCircPattern method in object ShapeFactory: Creates and returns a new circular pattern within the current body.
AddNewCircPatternofList method in object ShapeFactory: V5R8 Only: Creates and returns a new circular pattern within the current body using a list of shapes.
AddNewCircle2PointsRad method in object HybridShapeFactory: Creates a new Circle passing through 2 points with a radius within the current body.
AddNewCircle3Points method in object HybridShapeFactory: Creates a new circle passing through 3 points within the current body.
AddNewCircleBitangentPoint method in object HybridShapeFactory: Creates a new circle tangent to 2 curves and passing through one point within the current body.
AddNewCircleBitangentRadius method in object HybridShapeFactory: Creates a new circle tangent to 2 curves and with a radius within the current body.
AddNewCircleCenterAxis method in object HybridShapeFactory: Creates a circle from point and axis.
AddNewCircleCenterAxisWithAngles method in object HybridShapeFactory: Creates a circle from point and axis.
AddNewCircleCenterTangent method in object HybridShapeFactory: Creates a new circle with given center element and tangent curve.
AddNewCircleCtrPt method in object HybridShapeFactory: Creates a new whole circle defined by its center, a passing point within the current body.
AddNewCircleCtrPtWithAngles method in object HybridShapeFactory: Creates a new circle defined by its center, a passing point and angles within the current body.
AddNewCircleCtrRad method in object HybridShapeFactory: Creates a new whole circle defined by its center and a radius within the current body.
AddNewCircleCtrRadWithAngles method in object HybridShapeFactory: Creates a new circle defined by its center, a radius and angles within the current body.
AddNewCircleDatum method in object HybridShapeFactory: Creates a new datum of circle within the current body.
AddNewCircleTritangent method in object HybridShapeFactory: Creates a new tritangent circle within the current body.
AddNewCloseSurface method in object ShapeFactory: Creates and returns a new CloseSurface feature.
AddNewCombine method in object HybridShapeFactory: Creates a new Combine within the current body.
AddNewComponent method in object Products: Creates a component from the root product of a new ProductDocument object.
AddNewConic method in object HybridShapeFactory: Creates a new conic within the current body.
AddNewConicalReflectLineWithType method in object HybridShapeFactory: Creates a new conical ReflectLine within the current body.
AddNewConnect method in object HybridShapeFactory: Creates a new Connect within the current body.
AddNewCorner method in object HybridShapeFactory: Creates a new Corner within the current body.
AddNewCurveDatum method in object HybridShapeFactory: Creates a new datum of curve within the current body.
AddNewCurvePar method in object HybridShapeFactory: Creates a new CurvePar within the current body.
AddNewCurveSmooth method in object HybridShapeFactory: Creates a new CurveSmooth within the current body.
AddNewCylinder method in object HybridShapeFactory: Creates a new Cylinder within the current body.
AddNewDatums method in object HybridShapeFactory: Creates datums from a multi-domain result feature, one datum is created by object domain.
AddNewDefeaturing method in object ShapeFactory: Creates and returns a new defeaturing operation within the current container.
AddNewDevelop method in object HybridShapeFactory: Creates a new Develop within the current body.
AddNewDirection method in object HybridShapeFactory: Creates a new direction specified by an element within the current body.
AddNewDirectionByCoord method in object HybridShapeFactory: Creates a new Direction specifed by coordinates within the current body.
AddNewDraft method in object ShapeFactory: Creates and returns a new draft within the current body.
AddNewEdgeFilletWithConstantRadius method in object ShapeFactory
AddNewEdgeFilletWithVaryingRadius method in object ShapeFactory
AddNewEmptyRotate method in object HybridShapeFactory: Creates a new empty Rotate within the current body.
AddNewEmptyTranslate method in object HybridShapeFactory: Creates a new empty Translate within the current body.
AddNewExtract method in object HybridShapeFactory: Creates a new Extract within the current body.
AddNewExtractMulti method in object HybridShapeFactory: Creates a new Multiple Extract within the current body.
AddNewExtrapolLength method in object HybridShapeFactory: Creates a new Extrapol (specified by length) within the current body.
AddNewExtrapolUntil method in object HybridShapeFactory: Creates a new Extrapol (until an element) within the current body.
AddNewExtremum method in object HybridShapeFactory: Creates a new Extremum within the current body.
AddNewExtremumPolar method in object HybridShapeFactory: Creates a new Extremum Polar within the current body.
AddNewExtrude method in object HybridShapeFactory: Creates a new extrude within the current body.
AddNewFaceFillet method in object ShapeFactory
AddNewFill method in object HybridShapeFactory: Creates a new Fill within the current body.
AddNewFilletBiTangent method in object HybridShapeFactory: Creates a new a sphere bitangent fillet between two skins.
AddNewFilletTriTangent method in object HybridShapeFactory: Creates a new a tritangent fillet between three skins.
AddNewGSDCircPattern method in object ShapeFactory
AddNewGSDRectPattern method in object ShapeFactory
AddNewGroove method in object ShapeFactory: Creates and returns a new groove within the current body.
AddNewGrooveFromRef method in object ShapeFactory: Creates and returns a new groove within the current body.
AddNewHealing method in object HybridShapeFactory: Creates a new healing within the current body.
AddNewHelix method in object HybridShapeFactory: Creates a new Helix within the current body.
AddNewHole method in object ShapeFactory: Creates and returns a new hole within the current shape.
AddNewHoleFromPoint method in object ShapeFactory: Creates and returns a new hole within the current shape.
AddNewHoleFromRefPoint method in object ShapeFactory: Creates and returns a new hole within the current shape.
AddNewHoleFromSketch method in object ShapeFactory: Creates and returns a new hole within the current shape.
AddNewHoleWith2Constraints method in object ShapeFactory: Creates and returns a new hole within the current shape.
AddNewHoleWithConstraint method in object ShapeFactory: Creates and returns a new hole within the current shape.
AddNewHybridScaling method in object HybridShapeFactory: Creates a new scaling within the current body.
AddNewHybridSplit method in object HybridShapeFactory: Creates a new Split within the current body.
AddNewHybridTrim method in object HybridShapeFactory: Creates a new Trim within the current body by cutting and joining two elements.
AddNewIntegratedLaw method in object HybridShapeFactory: Creates Integrated Law.
AddNewIntersect method in object ShapeFactory: Creates and returns a new intersect operation within the current body.
AddNewIntersection method in object HybridShapeFactory: Creates a new Intersection within the current body.
AddNewInverse method in object HybridShapeFactory: Creates a new Inverse within the current body.
AddNewJoin method in object HybridShapeFactory: Creates a new Join within the current body.
AddNewLawDistProj method in object HybridShapeFactory: Creates a new law within the current body.
AddNewLineAngle method in object HybridShapeFactory: Creates a new angle line within the current body.
AddNewLineBiTangent method in object HybridShapeFactory: Creates a new bitangent line within the current body.
AddNewLineBisecting method in object HybridShapeFactory: Creates a new bisecting line within the current body.
AddNewLineBisectingOnSupport method in object HybridShapeFactory: Creates a new bisecting line on a support within the current body.
AddNewLineBisectingOnSupportWithPoint method in object HybridShapeFactory: Creates a new bisecting line on a support with a atarting point within the current body.
AddNewLineBisectingWithPoint method in object HybridShapeFactory: Creates a new bisecting line with a starting point within the current body.
AddNewLineDatum method in object HybridShapeFactory: Creates a new datum of line within the current body.
AddNewLineNormal method in object HybridShapeFactory: Creates a new normal line within the current body.
AddNewLinePtDir method in object HybridShapeFactory: Creates a new point-direction line within the current body.
AddNewLinePtDirOnSupport method in object HybridShapeFactory: Creates a new point-direction line within the current body.
AddNewLinePtPt method in object HybridShapeFactory: Creates a new point-point line within the current body.
AddNewLinePtPtExtended method in object HybridShapeFactory: Creates a new point-point line with extensions within the current body.
AddNewLinePtPtOnSupport method in object HybridShapeFactory: Creates a new point-point line with support within the current body.
AddNewLinePtPtOnSupportExtended method in object HybridShapeFactory: Creates a new point-point line with extensions and with support within the current body.
AddNewLineTangency method in object HybridShapeFactory: Creates a new tangent line within the current body.
AddNewLineTangencyOnSupport method in object HybridShapeFactory: Creates a new tangent line within the current body.
AddNewLoft method in object ShapeFactory: Creates and returns a new Loft feature.
AddNewLoft method in object HybridShapeFactory: Creates a new Loft within the current body.
AddNewMidSurface method in object HybridShapeFactory: Creates a new MidSurface in Automatic Creation Mode Only.
AddNewMidSurfaceWithAutoThreshold method in object HybridShapeFactory: Creates a new MidSurface in Automatic Creation Mode Only.
AddNewMirror method in object ShapeFactory: Creates and returns a new mirror within the current body.
AddNewNear method in object HybridShapeFactory: Creates a new Near within the current body.
AddNewOffset method in object HybridShapeFactory: Creates a new offset within the current body.
AddNewPad method in object ShapeFactory: Creates and returns a new pad within the current body.
AddNewPadFromRef method in object ShapeFactory: Creates and returns a new pad within the current body.
AddNewPlane1Curve method in object HybridShapeFactory: Creates a new plane passing through one planar curve within the current body.
AddNewPlane1Line1Pt method in object HybridShapeFactory: Creates a new plane passing through 1 line and 1 point within the current body.
AddNewPlane2Lines method in object HybridShapeFactory: Creates a new plane passing through 2 lines within the current body.
AddNewPlane3Points method in object HybridShapeFactory: Creates a new plane passing through 3 points within the current body.
AddNewPlaneAngle method in object HybridShapeFactory: Creates a new angle plane within the current body.
AddNewPlaneDatum method in object HybridShapeFactory: Creates a new datum of plane within the current body.
AddNewPlaneEquation method in object HybridShapeFactory: Creates a new equation plane within the current body.
AddNewPlaneMean method in object HybridShapeFactory: Creates a new mean through points plane within the current body.
AddNewPlaneNormal method in object HybridShapeFactory: Creates a new normal plane within the current body.
AddNewPlaneOffset method in object HybridShapeFactory: Creates a new offset plane within the current body.
AddNewPlaneOffsetPt method in object HybridShapeFactory: Creates a new offset trough point plane within the current body.
AddNewPlaneTangent method in object HybridShapeFactory: Creates a new tangent plane within the current body.
AddNewPocket method in object ShapeFactory: Creates and returns a new pocket within the current shape.
AddNewPocketFromRef method in object ShapeFactory: Creates and returns a new pocket within the current shape.
AddNewPointBetween method in object HybridShapeFactory: Creates a new PointBetween within the current body.
AddNewPointCenter method in object HybridShapeFactory: Creates a new circle center point within the current body.
AddNewPointCoord method in object HybridShapeFactory: Creates a new point defined by its cartesian coordinates within the current body.
AddNewPointCoordWithReference method in object HybridShapeFactory: Creates a new point defined its the cartesian coordinates regarding a reference point.
AddNewPointDatum method in object HybridShapeFactory: Creates a new datum of point within the current body.
AddNewPointOnCurveAlongDirection method in object HybridShapeFactory: Creates a new point on a curve with a deafult origin point and from a distance along direction.
AddNewPointOnCurveFromDistance method in object HybridShapeFactory: Creates a new point on a curve from a distance to an extremity within the current body.
AddNewPointOnCurveFromPercent method in object HybridShapeFactory: Creates a new point on a curve from a ratio of distance to an extremity within the current body.
AddNewPointOnCurveWithReferenceAlongDirection method in object HybridShapeFactory: Creates a new point on a curve with a reference point and from a distance along direction.
AddNewPointOnCurveWithReferenceFromDistance method in object HybridShapeFactory: Creates a new point on a curve with a reference point and from a distance within the current body.
AddNewPointOnCurveWithReferenceFromPercent method in object HybridShapeFactory: Creates a new point on a curve with a reference point and from a ratio of distance within the current body.
AddNewPointOnPlane method in object HybridShapeFactory: Creates a new point on a plane within the current body.
AddNewPointOnPlaneWithReference method in object HybridShapeFactory: Creates a new point on a plane with a reference point within the current body.
AddNewPointOnSurface method in object HybridShapeFactory: Creates a new point on a surface within the current body.
AddNewPointOnSurfaceWithReference method in object HybridShapeFactory: Creates a new point on a surface with a reference point within the current body.
AddNewPointTangent method in object HybridShapeFactory: Creates a new tangent to curve point within the current body.
AddNewPolyline method in object HybridShapeFactory: Creates a new Polyline within the current body.
AddNewPositionTransfo method in object HybridShapeFactory: Creates a new PositionTransfo within the current body.
AddNewProduct method in object Products: Creates a Product reference object.
AddNewProject method in object HybridShapeFactory: Creates a new Project within the current body.
AddNewRRS2ControllerIdentifier method in object RRSSettingAtt: Adds new controller identifier into the list represented by the "RRS2ControllerIdentifiers" parameter.
AddNewRectPattern method in object ShapeFactory: Creates and returns a new rectangular pattern within the current body.
AddNewRectPatternofList method in object ShapeFactory: V5R8 Only: Creates and returns a new rectangular pattern within the current body using a list of shapes.
AddNewReflectLine method in object HybridShapeFactory
AddNewReflectLineWithType method in object HybridShapeFactory: Creates a new ReflectLine within the current body.
AddNewRemove method in object ShapeFactory: Creates and returns a new remove operation within the current body.
AddNewRemoveFace method in object ShapeFactory: Creates and returns a new RemoveFace feature.
AddNewRemovedBlend method in object ShapeFactory: Creates and returns a new Removed Blend feature.
AddNewRemovedLoft method in object ShapeFactory: Creates and returns a new Removed Loft feature.
AddNewReplaceFace method in object ShapeFactory: Creates and returns a new Align/ ReplaceFace feature.
AddNewRevol method in object HybridShapeFactory: Creates a new revolution within the current body.
AddNewRib method in object ShapeFactory: Creates and returns a new rib within the current body.
AddNewRibFromRef method in object ShapeFactory: Creates and returns a new rib within the current body.
AddNewRotate method in object HybridShapeFactory: Creates a new Rotate within the current body.
AddNewRow method in object DesignTable: Adds a row in the design table source file.
AddNewScaling method in object ShapeFactory: Creates and returns a new scaling within the current body.
AddNewScene method in object Scenes: Creates a scene from a product and adds it to the Scenes collection.
AddNewSection method in object HybridShapeFactory: Creates a new section.
AddNewSewSurface method in object ShapeFactory: Creates and returns a new sewing operation within the current body.
AddNewShaft method in object ShapeFactory: Creates and returns a new shaft within the current body.
AddNewShaftFromRef method in object ShapeFactory: Creates and returns a new shaft within the current body.
AddNewShell method in object ShapeFactory: Creates and returns a new shell within the current body.
AddNewSlot method in object ShapeFactory: Creates and returns a new slot within the current shape.
AddNewSlotFromRef method in object ShapeFactory: Creates and returns a new slot within the current shape.
AddNewSolidCombine method in object ShapeFactory: Creates and returns a new SolidCombine feature.
AddNewSolidEdgeFilletWithConstantRadius method in object ShapeFactory: Creates and returns a new solid edge fillet with a constant radius.
AddNewSolidEdgeFilletWithVaryingRadius method in object ShapeFactory: Creates and returns a new solid edge fillet with a varying radius.
AddNewSolidFaceFillet method in object ShapeFactory: Creates and returns a new solid face-to-face fillet.
AddNewSolidTritangentFillet method in object ShapeFactory: Creates and returns a new solid tritangent fillet within the current body.
AddNewSphere method in object HybridShapeFactory: Creates a new Sphere within the current body.
AddNewSpine method in object HybridShapeFactory: Creates a new spine within the current body.
AddNewSpiral method in object HybridShapeFactory: Creates a new Spiral within the current body.
AddNewSpline method in object HybridShapeFactory: Creates a new Spline within the current body.
AddNewSplit method in object ShapeFactory: Creates and returns a new split operation within the current body.
AddNewStiffener method in object ShapeFactory: Creates and returns a new stiffener within the current body.
AddNewStiffenerFromRef method in object ShapeFactory: Creates and returns a new stiffener within the current body.
AddNewSurfaceDatum method in object HybridShapeFactory: Creates a new datum of surface within the current body.
AddNewSurfaceEdgeFilletWithConstantRadius method in object ShapeFactory: Creates and returns a new surface edge fillet with a constant radius.
AddNewSurfaceEdgeFilletWithVaryingRadius method in object ShapeFactory: Creates and returns a new surface edge fillet with a varying radius.
AddNewSurfaceFaceFillet method in object ShapeFactory: Creates and returns a new surface face-to-face fillet.
AddNewSurfaceTritangentFillet method in object ShapeFactory: Creates and returns a new surface tritangent fillet within the current body.
AddNewSurfacicAutoFillet method in object ShapeFactory: Creates and returns a new Surfacic autofillet.
AddNewSurfacicCircPattern method in object ShapeFactory: Creates and returns a new gsd circular pattern within the current body.
AddNewSurfacicRectPattern method in object ShapeFactory: Creates and returns a new GSD rectangular pattern within the current body.
AddNewSurfacicSewSurface method in object ShapeFactory: Creates and returns a new volume sewing operation within the current OGS/GS.
AddNewSurfacicUserPattern method in object ShapeFactory: Creates and returns a new GSD user pattern within the current body.
AddNewSweepCircle method in object HybridShapeFactory: Creates a new SweepCircle within the current body.
AddNewSweepConic method in object HybridShapeFactory: Creates a new SweepConic within the current body.
AddNewSweepExplicit method in object HybridShapeFactory: Creates a new SweepExplicit within the current body.
AddNewSweepLine method in object HybridShapeFactory: Creates a new SweepLine within the current body.
AddNewSymmetry method in object HybridShapeFactory: Creates a new Symmetry within the current body.
AddNewThickSurface method in object ShapeFactory: Creates and returns a new ThickSurface feature.
AddNewThickness method in object ShapeFactory: Creates and returns a new thickness within the current body.
AddNewThreadWithOutRef method in object ShapeFactory: Creates and returns a new thread\tap within the current body.
AddNewThreadWithRef method in object ShapeFactory: Creates and returns a new thread\tap within the current body.
AddNewTransfer method in object HybridShapeFactory: Creates a new Transfer within the current body.
AddNewTranslate method in object HybridShapeFactory: Creates a new Translate within the current body.
AddNewTrim method in object ShapeFactory: Creates and returns a new Trim operation within the current body.
AddNewTritangentFillet method in object ShapeFactory
AddNewUnfold method in object HybridShapeFactory: Creates a new Unfold within the current body.
AddNewUserPattern method in object ShapeFactory: Creates and returns a new user pattern within the current body.
AddNewUserPatternofList method in object ShapeFactory: V5R8 Only: Creates and returns a new user pattern within the current body using a list of shapes.
AddNewVolumeAdd method in object ShapeFactory: Creates and returns a Volumic Add feature.
AddNewVolumeCloseSurface method in object ShapeFactory: Creates and returns a new VolumeCloseSurface feature.
AddNewVolumeDatum method in object HybridShapeFactory: Creates a new datum of volume within the current body.
AddNewVolumeIntersect method in object ShapeFactory: Creates and returns a Volumic Intersect feature.
AddNewVolumeRemove method in object ShapeFactory: Creates and returns a Volumic Remove feature.
AddNewVolumeSewSurface method in object ShapeFactory: Creates and returns a new volume sewing operation within the current OGS/GS.
AddNewVolumeShell method in object ShapeFactory: Creates and returns a Volumic Shell feature.
AddNewVolumeThickSurface method in object ShapeFactory: Creates and returns a new VolumeThickSurface feature.
AddNewVolumeThickness method in object ShapeFactory: Creates and returns a volume new thickness within the current GS or OGS.
AddNewVolumeTrim method in object ShapeFactory: Creates and returns a new Volume Trim operation within the GS/OGS.
AddNewVolumicDraft method in object ShapeFactory: Creates and returns a new volume draft within the current body.
AddNewWrapCurve method in object HybridShapeFactory: Creates a new Wrap Curve Surface within the current body.
AddNewWrapSurface method in object HybridShapeFactory: Creates a new Wrap Surface within the current body.
AddNibbling method in object StrFeatureFactory: Adds a Coping on Plate or Member.
AddNomenclatureTree method in object ArrWorkbench: This method allows the user to add a nomenclature tree if the get_ArrNomenclatureTree returns a Return code of E_FAIL.
AddObjFrameProfile method in object RobGenericController: Add a new ObjFrame Profile into controller.
AddObject method in object Marker3D: Adds a link to an object.
AddObjectToFillet method in object ConstRadEdgeFillet: Adds a new sub-element to be filleted.
AddObjectToGenerate method in object ManufacturingGeneratorData: Adds an object to the output stream.
AddObjectToGenerateFromBuffer method in object ManufacturingGeneratorData: Adds an object to the output stream from the buffer.
AddObjectToGenerateWithBuffer method in object ManufacturingGeneratorData: Adds an object to the output stream within the buffer.
AddObjectToGenerateWithOutBuffer method in object ManufacturingGeneratorData: Adds an object to the output stream without the buffer.
AddObjectToModalValues method in object ManufacturingGeneratorData: Adds an object to the modal values manager only.
AddOffset method in object StrMemberExtremity: Adds an offset on the extremity.
AddOffsetFromVectors method in object DMOOffsets: Creates a new Offset from a set of vectors, and adds it to the DMOOffsets collection.
AddOperation method in object ManufacturingPrecedences: Adds a new precedence in the collection of precedences.
AddOperation method in object ManufacturingCopyTransformation: Add a Manufacturing Operation to a Copy Transformation.
AddPPInstruction method in object ManufacturingProgram: Add a PP Instruction to a Manufacturing Program.
AddPPWords method in object ManufacturingOperation: Add a path 'PP Words' to a Manufacturing Operation.
AddPart method in object MfgAssembly: Assignes a part (Product, Resource or other MA/MK) to the Manufacturing Assembly.
AddPartSurface method in object ManufacturingPattern: Adds a Part Surface to the Manufacturing Pattern.
AddPathway method in object ArrangementPathways: Creates an ArrangementItemReservation and adds it to the collection.
AddPickedMfgAssembly method in object PickActivity
AddPickedProduct method in object PickActivity
AddPieceCutter method in object HybridShapeTrim: Add piece Cutting element and its orientation.
AddPlacedMfgAssembly method in object PlaceActivity
AddPlacedProduct method in object PlaceActivity
AddPlate method in object StrObjectFactory: Creates a plate from a contour defined by coordinates.
AddPlateOnSurface method in object StrObjectFactory: Creates a plate from a surface.
AddPoint method in object HybridShapeSpline: Add a new point .
AddPoint method in object DrawingArrow: Add a point to an arrow.
AddPoint method in object DrawingLeader: Add a point to an leader.
AddPoint method in object HybridShapePlaneMean: Adds a point to the mean plane.
AddPointWithConstraintExplicit method in object HybridShapeSpline: Add a new point with explicit tangency and curvature.
AddPointWithConstraintFromCurve method in object HybridShapeSpline: Add a new point with tangency/curvature from a curve.
AddPointedGeometry method in object ManufacturingMachinableGeometry: Adds a geometry to the pointed geometry list.
AddPointedGeometryNotify method in object ManufacturingMachinableGeometry: Adds a geometry to the pointed geometry list (manage notification).
AddPointedGeometryWithNoDuplicatedCheck method in object ManufacturingMachinableGeometry: Adds a geometry to the pointed geometry list with no check on already referenced geometry.
AddPointedGeometryWithNoDuplicatedCheckNotify method in object ManufacturingMachinableGeometry: Adds a geometry to the pointed geometry list with no check on an already referenced geometry.
AddPoints method in object SchRoute: Add a list of point to a route.
AddPoints method in object SchGRRRoute: Add a list of point to a route.
AddPosition method in object ManufacturingPattern: Adds a position to the Manufacturing Pattern.
AddPressureOverclosureTable method in object ABQMechConnBehavior: Adds a list of tabular pressure overclosure in the connection behavior.
AddPrimary method in object Layout2DViews: Creates a Layout view and adds it to the Layout view collection.
AddPrinterDirectory method in object PrintersSettingAtt: Add a printer file directory to printer directories list and define its state.
AddPrinterGroup method in object PrintersSettingAtt: Add a printer group and define the printers included in this group.
AddProduct method in object FixTogether: Add a product to a FixTogether.
AddProductMotion method in object Replay: Adds a product to be taken into account in the Replay object.
AddProductSceneFull method in object ProductScenes: Creates a new FULL scene from a set of products and adds it to the ProductScenes collection.
AddProductScenePartial method in object ProductScenes: Creates a new DELTA scene from a set of products and adds it to the ProductScenes collection.
AddRayleighDampingDataTable method in object ABQIAABQSteadyStateLinDynStepModalVB: Adds a rayleigh damping data over ranges of Modes or Frequencies The number of values in all the four of the parameters must match.
AddRectangle method in object ArrangementRectangles: Creates an ArrangementRectangle and adds it to the collection.
AddRectangularContour method in object ArrangementContours: Creates a Rectangular Contour by adding a ArrangementRectangle to the collection.
AddRectangularEndPlate method in object StrObjectFactory: Creates a rectangular end plate on an extremity of a given member.
AddReference method in object UserSurface
AddReferenceInAProductCtx method in object UserSurface
AddRelated method in object Layout2DViews: Creates a projection or isometric Layout View2DL from a given View2DL.
AddRemoveFace method in object ReplaceFace: Sets the face to be removed.
AddResidualModeRegion method in object ABQFrequencyStep: Adds the Residual Mode Region.
AddResidualModeRegionDOF method in object ABQFrequencyStep: Adds the Residual Mode Region DOF.
AddRootOfFacts method in object ExpertRuleBaseRuntime: Adds a new root of facts to the rule base.
AddRotabl method in object ManufacturingProgram: Add a Table Head Rotation instruction to a Manufacturing Program.
AddRow method in object DrawingTable: Adds a row before the indicated row.
AddRun method in object ArrangementRuns: Creates an ArrangementRun and adds it to the collection.
AddSample method in object Replay
AddSection method in object HybridShapeSpine: Adds a section or a plane to the spine curve.
AddSection method in object StrObjectFactory: Creates a section object from part document.
AddSectionFromCatalog method in object StrObjectFactory: Creates a section object from part document.
AddSectionToLoft method in object HybridShapeLoft: Retrieves a loft section.
AddShapeRepresentation method in object Product: Adds a representation to the product with a specific behavior.
AddSlot method in object SfmSlots: Creates a New Slot.
AddSolution method in object AnalysisCase: Creates a Solution set defined by its type in the Case.
AddSplitFromFile method in object FreeSpaces: Compute a split free space from a file.
AddSplitPlane method in object ReplaceFace: Sets the replacing element.
AddStructuralDampingDataTable method in object ABQIAABQSteadyStateLinDynStepModalVB: Adds a structural damping data over ranges of Modes or Frequencies The number of values in all the three of the parameters must match.
AddSubElement method in object HybridShapeAssemble: Adds a sub element to the hybrid shape assemble feature object.
AddSuperPlate method in object SfmFactory: Creates a SuperPlate.
AddSuperStiffener method in object SfmFactory: Creates a SuperStiffener.
AddSuperStiffenerOnFreeEdge method in object SfmFactory: Creates a SuperStiffener on Free Edge.
AddSupport method in object AnalysisImport: AddSupport for loads import if needed.
AddSupportAtBound method in object HybridShapeFill: Inserts the support at specified boundary in the Fill.
AddSupportForBody method in object ABQMassScaling: Adds the specified body as a support.
AddSupportFromAnalysisEntity method in object ABQFastenedPair: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromBody method in object ABQRigidBodyConstraint: Creates a new support for the body and adds it to the description of the Analysis Entity.
AddSupportFromConstraint method in object ABQFastenedPair: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromConstraint method in object AnalysisEntity: Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromConstraint method in object AnalysisLocalEntity: Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromConstraint method in object ABQSurfaceToSurfaceContact: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromPart method in object AnalysisEntity: Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromPart method in object ABQRigidBodyConstraint: Creates a new support for the part and adds it to the description of the Analysis Entity.
AddSupportFromProduct method in object ABQLoad: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromProduct method in object ABQMassScaling: Adds the specified product reference as a support.
AddSupportFromProduct method in object ABQTemperature: This adds the support from a product to the Field.
AddSupportFromProduct method in object ABQOutputRequest: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromProduct method in object BasicComponent: Creates a new support and add it to the description of the basic component.
AddSupportFromProduct method in object AnalysisEntity: Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromProduct method in object ABQBoundaryCondition: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromProduct method in object ABQPretensionProperty: Creates a new support and adds it to the description of the bolt pretension property.
AddSupportFromProduct method in object AnalysisLocalEntity: Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromPublication method in object ABQLoad: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromPublication method in object ABQMassScaling: Adds a support from the publication.
AddSupportFromPublication method in object ABQTemperature: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromPublication method in object ABQRigidCoupling: Adds a support to the coupling.
AddSupportFromPublication method in object ABQOutputRequest: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromPublication method in object ABQSmoothCoupling: Adds a support to the coupling.
AddSupportFromPublication method in object BasicComponent: Creates a new support and add it to the description of the Basic Component.
AddSupportFromPublication method in object AnalysisEntity: Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromPublication method in object ABQBoundaryCondition: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromPublication method in object AnalysisMeshPart: Creates a new support and add it to the support description of the mesh part.
AddSupportFromPublication method in object ABQPretensionProperty: Creates a new support and adds it to the description of the bolt pretension property.
AddSupportFromPublication method in object ABQRigidBodyConstraint: Adds a support to the Rigid body constraint.
AddSupportFromPublication method in object AnalysisLocalEntity: Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromPublication method in object ABQAnalyticalRigidSurface: Adds a support to the Analytical rigid surface.
AddSupportFromPublication method in object AnalysisMeshLocalSpecification: Defines the support of the local specification.
AddSupportFromReference method in object ABQLoad: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromReference method in object ABQRigidCoupling: Adds a support to the coupling.
AddSupportFromReference method in object ABQOutputRequest: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromReference method in object ABQSmoothCoupling: AddSupportFromReference - adds a support to the coupling.
AddSupportFromReference method in object BasicComponent: Creates a new support and add it to the description of the basic component.
AddSupportFromReference method in object AnalysisEntity: Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromReference method in object ABQBoundaryCondition: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromReference method in object AnalysisMeshPart: Creates a new support and add it to the support description of the mesh part.
AddSupportFromReference method in object ABQPretensionProperty: Creates a new support and adds it to the description of the bolt pretension property.
AddSupportFromReference method in object AnalysisLocalEntity: Creates a new support and add it to the description of the Analysis Entity.
AddSupportFromReference method in object ABQAnalyticalRigidSurface: Creates a new support for the Reference and adds it to the description of the Analysis Entity.
AddSupportFromReference method in object ABQSurfaceToSurfaceContact: Creates a new support and adds it to the description of the Analysis Entity.
AddSupportFromReference method in object ABQDamperConnectionProperty: Adds support to the Damper connection property.
AddSupportFromReference method in object ABQSpringConnectionProperty: Adds support to the spring connection property.
AddSupportFromReference method in object AnalysisMeshLocalSpecification: Defines the support of the local specification.
AddTempDependentFilmCoeffTable method in object ABQFilmCondition: Adds a list of temperature dependent film coefficients if the film condition is temperature dependent.
AddTimeAmplitudeTable method in object ABQTabularAmplitude: Adds a list of time and amplitude for the specified time span STEP_TIME or TOTAL_TIME The number of values in both of the parameters must match.
AddTimeAmplitudeTable method in object ABQSmoothStepAmplitude: Adds a list of time and amplitude for the specified time span STEP_TIME or TOTAL_TIME The number of values in both of the parameters must match.
AddToolChange method in object ManufacturingProgram: Add a Tool Change Operation to a Manufacturing Program.
AddToolChangeMultipleFeeds method in object ManufacturingProgram: Add a Tool Change Operation to a Manufacturing Program.
AddToolProfile method in object RobGenericController: Add a new Tool Profile into controller.
AddTriEltCst method in object Constraints: Creates a new constraint applying to three geometric elements and adds it to the Constraints collection.
AddTrickyFace method in object HybridShapeOffset: Adds a tricky face object on the object.
AddURL method in object Noa: Sets an URL.
AddURL method in object FlagNote: Sets an URL.
AddUrl method in object Hyperlink: Adds a url to an Hyperlink.
AddUserNomenclature method in object ArrNomenclatures: Creates a new UserNomenclature and adds it to this collection.
AddUserSurface method in object UserSurface
AddedMaterial property in object SfmWeld: Gets Added Material.
AddedMaterialPercentage property in object PartComps: Returns the added material percentage.
AddedMaterialVolume property in object PartComps: Returns the added material volume.
AddtoLogicalDataAttrList method in object PlugMapViewSettingAtt: Method to add a parameter to the LogicalDataAttrList.
AddtoTerminationAttrList method in object PlugMapViewSettingAtt: Method to add a parameter to the TerminationAttrList.
AdjustMethod property in object ABQSurfaceToSurfaceContact: Sets or returns the method type in a contact pair.
AdjustMethod_Type enum: Adjust Method types.
AdjustSlaveNode property in object ABQFastenedPair: Sets or returns the adjust slave node flag.
AdjustSlaveNode property in object ABQFastenedConnectionEnhancement: Sets or returns the adjust slave node flag.
AdjustToleranceVal property in object ABQSurfaceToSurfaceContact: ets or returns the tolerance value of the contact pair.
AdvancedLaw property in object HybridShapeIntegratedLaw: Gets or sets the external law.
AdvancedTolerantMode property in object HybridShapeFill: Returns or sets the tolerant mode taken into account during fill construction.
AdvancedView method in object NavigatorWorkbench: Applies the annotated view to the current viewer.
AffectedComponentsCount method in object AssemblyFeature: Returns the affected component list count.
Affiche_Attribut property in object MigrBatchSettingAtt: Retrieves or sets the state of the "Display Report Attribute" setting parameter.
Affinity object: Represents the hybrid shape Affinity feature object.
AlgorithmType property in object Optimization: Returns or sets the algorithm type.
AlignType property in object PspPartConnector: Returns the alignment type for this connector.
AlignedWithReferenceView method in object DrawingView: Activates the alignment with the reference view.
AlignedWithReferenceView method in object Layout2DView: Activates the alignment with the reference view.
AllAround property in object DrawingLeader: Returns or sets the status of all around.
AllChecksReport property in object ReportGenerationSheetSettingAtt: Returns or sets the AllChecksReport parameter.
AllDatumsSimple property in object ReferenceFrame: Retrieves all datums simple used in Reference Frame.
AllJointsSpeed property in object HtsJointSpeedSettingsAtt: Returns or sets the JointSpeed parameter.
AllLeaves method in object Groups: Returns a group which contains all the terminal nodes of the current root product.
AllParameters property in object ParameterSet: Returns all parameters under this set of parameter.
AllPartsLoaded method in object Fastener: Gets the loading status of the joining parts of the fastener If all the joining parts are loaded in the V5 session then it returns TRUE If no parts or some parts are loaded in the V5 session then it returns FALSE  Return type : 1,0 </dl> <dt>Example: <dd> Dim AllPartsLoaded AllPartsLoaded = MyFastener.
AllResourceFilter property in object VerifTabSettingAtt
AllZBufferElementMode property in object VisualizationSettingAtt: Returns the AllZBufferElementMode parameter.
AllowDiskSave property in object CD5SaveOperation: Returns (gets) or sets the value of the Save option "Allow Disk Save".
AllowDistortions property in object FTAInfraSettingAtt: Returns or sets the Allow Distortions setting parameter value.
AllowReplaceStructExposedDuringExtractSave property in object CDMASettingAtt: Retrieves or sets the enabling of replacing the structure exposed assembly with the blackbox resulting of extract/save.
AllowSeparation property in object ABQMechConnBehavior: Sets or returns the seperation status for the hard contact pressure overclosure.
AlphabeticOrder property in object FTASettingAtt: Returns or sets the AlphabeticOrder setting parameter value.
AlsoDeleteExclusiveParents property in object PartInfrastructureSettingAtt: Returns or sets the "AlsoDeleteExclusiveParents" parameter.
AlternateView property in object Export3DXmlSettingAtt
Ambient property in object RenderingLight: Returns or sets the light ambient intensity of a light.
AmbientActivation property in object VisualizationSettingAtt: Returns the AmbientActivation parameter.
AmbientCoefficient property in object RenderingMaterial: Returns or sets the ambient coefficient of a material.
AmbientFactor property in object RenderingShooting: Returns or sets amount of ambient used for indirect illumination (final gathering or global illumination).
AmbinocularAngle property in object SWKVision: Returns or sets the vision Ambinocular angle.
Amplitude property in object ABQLoad: Sets or returns the amplitude, given the name of the amplitude.
Amplitude property in object ABQTemperatureHistory: Sets or returns the amplitude of the temperature field.
AnEmptyAnnotationsList property in object AnnotationSet: Retrieves an empty Annotations'Collection.
Analysis property in object AnalysisDocument: Returns the root analysis object from the current analysis document.
AnalysisAdaptivityManager object: The interface to access a CATIAAnalysisAdaptivityManager.
AnalysisCacheMode property in object AnalysisGeneralSettingAtt: Tells if Product Structure Cache Mode will be handled.
AnalysisCase object: Represent the analysis case object.
AnalysisCases object: The collection of analysis case making an Analysis.
AnalysisCases property in object AnalysisModel: Returns the collection of analysis cases defined on the analysis model.
AnalysisColorMap object: Represents the Color Map Object of the post-processing Image Object.
AnalysisColorMap property in object AnalysisImage: Returns the color map object associated with an analysis image.
AnalysisDisplayMode property in object FTASettingAtt: Returns the AnalysisDisplayMode parameter.
AnalysisDocument object: Represents the document object for analysis.
AnalysisEntities object: The collection of analysis entities.
AnalysisEntities property in object AnalysisSet: Returns the analysis entities collection associated to a set.
AnalysisEntity object: Represent the analysis entity object.
AnalysisExport object
AnalysisGeneralSettingAtt object: Interface to handle the Analysis & Simulation "GeneralSetting".
AnalysisGlobalSensor object: Represent the analysis global sensor.
AnalysisImage object: Represents the analysis image object.
AnalysisImages object: The collection of analysis images.
AnalysisImages property in object ABQSolutionCase: Returns the analysis images associated with this solution case.
AnalysisImages property in object ABQSolutionStep: Returns the analysis images associated with this solution step.
AnalysisImages property in object AnalysisSet: Returns the analysis images collection associated with an analysis set.
AnalysisImages property in object AnalysisImage: Returns the analysis images collection associated with an analysis image.
AnalysisImages property in object AnalysisEntity: Returns the analysis images collection associated with an analysis entity.
AnalysisImages property in object AnalysisLocalEntity: Returns the analysis images collection associated with an analysis entity.
AnalysisImport object
AnalysisLevel property in object AnalysisSettingAtt: Returns or sets the AnalysisLevel parameter.
AnalysisLinkedDocuments object: The collection of Documents linked by Analysis.
AnalysisLoadMode property in object AnalysisGeneralSettingAtt: Retrieves if pointed document will be loaded.
AnalysisLocalEntities object: The collection of local analysis entities.
AnalysisLocalEntities property in object AnalysisEntity: Returns the analysis local entity collection associated with an analysis entity.
AnalysisLocalEntity object: Represent the analysis local entity object.
AnalysisLocalSensor object: Represent the analysis local sensor.
AnalysisManager object: Represents the root object inside an analysis document.
AnalysisMaterial object: Represents an AnalysisMaterial object.
AnalysisMaterial property in object Material: Returns the analysis material object from the current material.
AnalysisMeshElement object: The interface to access a CATIAAnalysisSelectedElement.
AnalysisMeshLocalSpecification object: The interface to access a CATIAAnalysisMeshLocalSpecification.
AnalysisMeshLocalSpecifications object: The interface to access a AnalysisMeshLocalSpecifications.
AnalysisMeshLocalSpecifications property in object AnalysisMeshPart: Returns the local specification collection from the meshpart analysis.
AnalysisMeshManager object: The interface to access a CATIAAnalysisMeshManager.
AnalysisMeshNode object: The interface to access a CATIAAnalysisSelectedNode.
AnalysisMeshPart object: The interface to access a CATIAAnalysisMeshPart.
AnalysisMeshParts object: The collection of analysis meshparts.
AnalysisMeshParts property in object AnalysisMeshManager: Returns the meshpart collection from the current analysis mesh manager.
AnalysisModel object: Represent the analysis model object.
AnalysisModels object: The collection of analysis models making an analysis document.
AnalysisModels property in object AnalysisManager: Returns the analysis model collection from the current analysis manager.
AnalysisNamingAuto property in object AnalysisGeneralSettingAtt: Tells if Automatic naming will be activated.
AnalysisOutputEntities object: The collection of analysis entities results of a set.
AnalysisOutputEntities property in object AnalysisSet: Returns the analysis entities collection associated to a set.
AnalysisPostManager object: Interface to define the Post Processing Manager.
AnalysisPostProANRSettingAtt object: Interface to handle the Analysis & Simulation "PostProcessingSetting".
AnalysisPostProSettingAtt object: Interface to handle the Analysis & Simulation "PostProcessingSetting".
AnalysisReportingSettingAtt object: Interface to handle the Analysis & Simulation "ReportingSetting".
AnalysisSensor object: Represent the analysis sensor.
AnalysisSet object: Represent the analysis set object.
AnalysisSets object: The collection of analysis sets.
AnalysisSets property in object AnalysisSet: Returns the analysis sets collection associated with an analysis set.
AnalysisSets property in object AnalysisCase: Returns the analysis sets collection associated to the analysis case.
AnalysisSets property in object AnalysisModel: Returns the analysis sets collection associated with a analysis model.
AnalysisSets property in object AnalysisManager: Returns the analysis sets collection associated with an analysis manager.
AnalysisSettingAtt object: Interface to handle parameters of DELMIA Analysis Tools Options Tab page Role: This interface is implemented by a component which represents the controller of Analysis Tools Options parameter settings.
AnalysisSupports object: The collection of analysis case making an Analysis.
AnalysisSupports property in object BasicComponent: Returns the list of Analysis Supports.
AnalysisSupports property in object AnalysisEntity: Returns the list of Analysis Supports.
AnalysisSupports property in object AnalysisLocalEntity: Returns the list of Analysis Supports (Selection of geometrical or mesh entities) which define the area on which the analysis is applied on.
AnalysisV4Services object: The interface to access a CATIAAnalysisV4Services.
Analyze object: Represents the analysis object associated with a product.
Analyze property in object Product: Returns the Analyze object associated to the current product.
AnchorDirReverse property in object Sweep: Returns the Sweep AnchorDirReverse flag (for Sweep Move Profile only).
AnchorMode property in object Hole: Returns the hole anchor mode.
AnchorMode property in object AssemblyHole: Returns or sets the hole anchor mode.
AnchorPoint property in object UserPattern: Returns the anchor point of the user pattern.
AnchorPoint property in object DrawingTable: Returns or sets the anchor point of a drawing table.
AnchorPoint property in object DrawingLeader: Returns or sets anchor point.
AnchorPoint property in object SfmProfile: Returns or sets the member's anchor point.
AnchorPoint property in object DrawingTextProperties: Returns or sets the anchor point of the drawing text.
AnchorPosition property in object DrawingText: Returns or sets the anchor position of the drawing text.
AnchorSymbol property in object DrawingLeader: Returns or sets the anchor symbol of the drawing leader.
Angle property in object Rotate: Returns the rotation angle.
Angle property in object Chamfer: Returns the chamfer angle.
Angle object: Represents the angle parameter.
Angle property in object HybridShapeRotate: Returns the rotation angle.
Angle property in object DrawingGDT: Returns or sets the angle of the drawing GDT.
Angle property in object StrMember: Returns or set the orientation of the section on the support object.
Angle property in object DrawingView: Returns or sets the angle of the drawing view.
Angle property in object RenderingLight: Returns or sets the light angle of a spot light.
Angle property in object DrawingText: Returns or sets the angle of the drawing text.
Angle property in object DrawingTable: Returns or sets the angle orientation of a drawing table.
Angle property in object HybridShapeLineAngle: Role: Get the angle to the reference curve of the line.
Angle property in object DrawingWelding: Returns or sets the angle of the drawing text.
Angle property in object DrawingCoordDim: Returns or sets the angle of the drawing coordinate dimension.
Angle property in object HybridShapePlaneAngle: Returns the rotation angle.
Angle property in object Layout2DView: Returns or sets the angle of the Layout2D view.
Angle property in object DrawingComponent: Returns or sets the angle of the drawing component instance.
Angle property in object HybridShapeReflectLine: Returns or sets the angle used to create the reflectline.
Angle property in object Measurable: Returns the Angle of a circle or cone.
Angle property in object HybridShapeExtremumPolar: returns the resulting angle of extremum.
Angle property in object SfmMember: Returns or sets the member's angle.
Angle property in object IgesSettingAtt: Returns or sets the Angle setting parameter value.
AngleCriteria property in object SWKIKConstraint: Returns or sets the angle criteria that will be used to evaluate success or failure of the constraint resolution.
AngleCut property in object StrMemberExtremity: Returns the angle cut for a member extremity.
AngleLaw property in object HybridShapeSweepLine: Returns or sets the angular law.
AngleLaw property in object HybridShapeSweepExplicit: Returns or sets the angle law feature associated to the reference surface.
AngleLawInversion property in object HybridShapeSweepLine: Returns or sets whether the angular law has to be inverted.
AngleLawInversion property in object HybridShapeSweepExplicit: Returns or sets the angle law inversion information.
AngleLawType property in object HybridShapeSweepLine: Returns or sets the angular law type.
AngleLawType property in object HybridShapeSweepExplicit: Returns or sets the angle law type associated to the reference surface.
AngleLimit property in object Shuttle: Returns/Stores the angle limit attribute.
AngleLimit property in object FittingSettingAtt
AngleMaxTolerance property in object ToleranceSheetSettingAtt: Returns or sets the AngleMaxTolerance parameter.
AngleMinTolerance property in object ToleranceSheetSettingAtt: Returns or sets the AngleMinTolerance parameter.
AngleMode property in object SfmStiffener: Returns or sets the angle mode.
AngleParam property in object SfmMember
AngleParameter property in object StrMember: Returns the parameter used to define the orientation of the section on the support object.
AngleSector property in object Constraint: Returns or sets the constraint angle (or angular) sector.
AngleStep property in object ManipSettingAtt
AngleToTarget property in object SWKIKConstraint: Returns the angle (in radians) from the constraint end effector to the target.
AngleValidation property in object Shuttle: Returns/Stores the angle validation attribute.
AngleValue property in object Rotate: Returns or sets the rotation angle value.
AngleValue property in object HybridShapeRotate: Returns or sets the rotation angle value.
AngulaireGeneralTolClass property in object FTASettingAtt: Returns or sets the Dimension general class parameter.
AngularDirectionRow property in object CircPattern: Returns the position of the shape to be copied along the angular direction.
AngularRepartition object: Represents the angular repartition.
AngularRepartition property in object CircPattern: Returns the angular repartition.
AngularSpacing property in object AngularRepartition: Returns the angle between two consecutive copies of a shape along the repartition crown.
AngularThreshold property in object HybridShapeExtract: Returns or sets the AngularThreshold.
AngularThresholdActivity property in object HybridShapeExtract: Returns or sets the AngularThresholdActivity.
Animation property in object Export3DXmlSettingAtt: Returns or sets the animation activation flag.
AnlAccelLimit property in object AnalysisSettingAtt: Returns or sets the AnlAccelLimit parameter.
AnlCautionZone property in object AnalysisSettingAtt: Returns or sets the AnlCautionZone parameter.
AnlIOAnalysis property in object AnalysisSettingAtt: Returns or sets the AnlIOAnalysis parameter.
AnlIntDist property in object AnalysisSettingAtt: Returns or sets the AnlIntDist parameter.
AnlIntf property in object AnalysisSettingAtt: Returns or sets the AnlIntf parameter.
AnlLinAccelLimit property in object AnalysisSettingAtt: Returns or sets the AnlLinAccelLimit parameter.
AnlLinSpeedLimit property in object AnalysisSettingAtt: Returns or sets the AnlLinSpeedLimit parameter.
AnlMeasure property in object AnalysisSettingAtt: Returns or sets the AnlMeasure parameter.
AnlRotAccelLimit property in object AnalysisSettingAtt: Returns or sets the AnlRotAccelLimit parameter.
AnlRotSpeedLimit property in object AnalysisSettingAtt: Returns or sets the AnlRotSpeedLimit parameter.
AnlTravelLimit property in object AnalysisSettingAtt: Returns or sets the AnlTravelLimit parameter.
AnlVelocityLimit property in object AnalysisSettingAtt: Returns or sets the AnlVelocityLimit parameter.
AnnotDimInvalid property in object FTASettingAtt: Returns the AnnotDimInvalid parameter.
AnnotDimOnDeletedGeom property in object FTASettingAtt: Returns the AnnotDimOnDeletedGeom parameter.
AnnotDimOnUnloadedGeom property in object FTASettingAtt: Returns the AnnotDimOnUnloadedGeom parameter.
AnnotOnZeroZSetting property in object FTASettingAtt: Returns the AnnotOnZeroZSetting parameter.
AnnotatedView object: Represents an annotated view.
AnnotatedView property in object Export3DXmlSettingAtt
AnnotatedViews object: A collection of AnnotatedView objects.
AnnotatedViews property in object Clash: Returns the AnnotatedViews collection of the clash.
AnnotatedViews property in object Section: Returns the AnnotatedViews collection of the section.
AnnotatedViews property in object Distance: Returns the AnnotatedViews collection of the distance.
AnnotatedViews property in object NavigatorWorkbench: Returns the AnnotatedViews collection.
Annotation object: Interface for the Technological Product Specification (TPS) objects.
Annotation2 object: Interface for the Technological Product Specification (TPS) objects.
Annotation3D property in object Export3DXmlSettingAtt: Returns or sets the 3D annotation activation flag.
Annotation3DMode property in object MultiCADSettingAtt: Returns or sets the Annotation 3D mode R18sp3 on env.
AnnotationActivity property in object WorkGeneralSettingAtt: Returns or sets the AnnotationActivity parameter.
AnnotationFactory object: Interface for the TPS Factory.
AnnotationFactory property in object AnnotationSet: Gets the factory to create annotations.
AnnotationFactory2 object: Interface for the TPS Factory.
AnnotationFactory2 property in object AnnotationSet: Gets the factory to create annotations.
AnnotationPlane property in object TPSView: Reads view annoation plane.
AnnotationSet object: Interface for the TPS Set of objects.
AnnotationSetPupose property in object AnnotationSet: Gets the annotation Set specifications purpose.
AnnotationSetTransformIntoAssemblySet object: Interface designed to transform an annotation set into an assembly annotation set.
AnnotationSetType property in object AnnotationSet: Gets the annotation Set type.
AnnotationSets object
AnnotationSets property in object Part: Returns the collection object containing the annotation sets.
AnnotationSketch property in object TPSView: Gets / Sets the annotation Sketch associated under the current View.
Annotations object: Interface for collection of TPS objects CATIAAnnotation.
Annotations property in object TPSView: Retrieves the TPS components of the View.
Annotations property in object Capture: Retrieves the TPSs that are visualy managed by this Capture.
Annotations property in object AnnotationSet: Retrieves the TPS components of the set.
Anthro property in object SWKManikin: Returns the anthropometry of the current manikin.
AntiAliasingMode property in object VisualizationSettingAtt: Returns the AntiAliasingMode parameter.
AntiAliasingOffset property in object VisualizationSettingAtt: Returns the AntiAliasingOffset parameter.
AntialiasingContrast property in object RenderingShooting: Returns or sets the antialiasing contrast threshold value.
AntialiasingMaxSample property in object RenderingShooting: Returns or sets the antialiasing maximum sample number for image computation.
AntialiasingMinSample property in object RenderingShooting: Returns or sets the antialiasing minimum sample number for image computation.
AnyObject object: Represents the base object for all other objects except collection and reference objects.
AppAddConnector method in object SchAppConnection: Add a connector.
AppAddConnector method in object SchAppConnectable: Add a connector.
AppAddImage method in object SchAppMultiImageMaster: Add an image for this master object.
AppAddZoneMember method in object SchAppZone: Add an application connectable object to the zone as member.
AppBreak method in object SchAppRoute: Break the application route into 2 routes.
AppChooseGapPriority method in object SchAppGapPriority: Identify which of 2 intersecting routes should be gapped.
AppCleanUpWhenApplicationEnds method in object SchAppEnvironment: Initialize environment when schematic application ends.
AppConnect method in object SchAppConnector: Connect to an input connector.
AppConnectBranch method in object SchAppConnector: Connect to an input connector for Branch.
AppCreateCompRef method in object SchAppObjectFactory: Create an Application Component reference.
AppCreateCompRef method in object SchAppObjectFactory2: Create an Application Component reference.
AppCreateComponentInst method in object SchAppComponent: Create a component instance.
AppCreateConnection method in object SchAppObjectFactory: Create an Application Connection object.
AppCreateConnection method in object SchAppObjectFactory2: Create an Application Connection object.
AppCreateGroup method in object SchAppObjectFactory: Create an Application Group object.
AppCreateGroup method in object SchAppObjectFactory2: Create an Application Group object.
AppCreateLocalReference method in object SchAppRoute: Make a local route reference in another document by copying an existing one in the current document.
AppCreateLocalReference method in object SchAppComponent: Create Local Reference object.
AppCreateRoute method in object SchAppObjectFactory: Create an Application Route object.
AppCreateRoute method in object SchAppObjectFactory2: Create an Application Route object.
AppCreateRouteFromRef method in object SchAppObjectFactory: Create an Application Route object with a specific reference.
AppCreateRouteFromRef method in object SchAppObjectFactory2: Create an Application Route object with a specific reference.
AppCreateRouteWithInfo method in object SchAppObjectFactory2: Create an Application Route object with application information.
AppCreateZone method in object SchAppObjectFactory: Create an Application Zone object.
AppCreateZone method in object SchAppObjectFactory2: Create an Application Zone object.
AppDisconnect method in object SchAppConnector: Disconnect from an input connector.
AppGetApplicationData method in object SchAppCntrData: Get application data.
AppGetAssociatedConnectable method in object SchAppConnector: Find the application object that owns this connector.
AppGetComponentBaseClass method in object SchAppClass: Provide the application class names for the base component classes.
AppGetConnectorColorByType method in object SchAppCntrColor: Specify the connector color of this connector type.
AppGetDefaultGRRName method in object SchAppComponent: Get the default graphical representation names of an application component.
AppGetDeleteWarning method in object SchAppDeleteCheck: Returns the caption and message text to be used as a warning for the delete operation.
AppGetFlowCapability method in object SchAppCntrFlow: Query the application Flow Capability property of this connector.
AppGetFlowReality method in object SchAppCntrFlow: Query the application Flow Reality property of this connector.
AppGetGroupBaseClass method in object SchAppClass: Provide the application class name for Schematic Group class.
AppGetLink method in object SchAppCntrDocLink
AppGetLinkedDocs method in object SchAppCntrDocLink: Get a list of linked connectors, their documents' names, uuids, and 'open in session' statuses, and a publication name of the connectors.
AppGetMasterDocument method in object SchAppMultiImage: Get the document where the master of this image object resides.
AppGetMasterObject method in object SchAppMultiImage: Get the master object of this image.
AppGetReferenceName method in object SchAppConnectable: Get the reference name of a connectable.
AppGetRouteBaseClass method in object SchAppClass: Provide the application class name for Schematic Route class.
AppGetScalingPriority method in object SchAppScalingRule: Get a priority number to indicate the adjustment (moving) priority of this object during scaling.
AppGetZoneBaseClass method in object SchAppClass: Provide the application class name for Schematic Zone class.
AppInit method in object SchAppModelInit: Initialize application model.
AppInitWhenApplicationStarts method in object SchAppEnvironment: Initialize environment when schematic application starts.
AppIsCntrConnected method in object SchAppConnector: Query whether the connector has been connected.
AppIsLinkable method in object SchAppCntrDocLink: Query whether this connector and input connector can be linked.
AppIsOKToCreateImage method in object SchAppMultiImageMaster: Check if OK to create an image of this master object.
AppIsTargetOKForInsert method in object SchAppCompatible: Query whether a component (source) is compatible to be inserted into this route.
AppIsTargetOKForPlace method in object SchAppCompatible: Query whether a component (source) is compatible to be connected to "this" object (the target, which can be a route or a component).
AppIsTargetOKForRoute method in object SchAppCompatible: Query whether a route of the input class type can be connected to "this" object (the target, which can be a route or a component).
AppIsUpToDate method in object SchAppMultiImage: Check if the image object is up-to-date.
AppLink method in object SchAppCntrDocLink: Create an external link to another connector.
AppLinkInit method in object SchAppCntrDocLink: Publish this connector to make it available for linking.
AppListCompatibleTypes method in object SchAppConnector: Find all the class types of connector that are compatible with this connector for connections.
AppListConnectables method in object SchAppConnection: Find all the application object connected to this connection through their connectors.
AppListConnectables method in object SchAppConnectable: Find all the application objects connected to this object through their connectors.
AppListConnections method in object SchAppConnector: Find all the connections that include this connector.
AppListConnectors method in object SchAppConnection: Find all the connectors included in this connection.
AppListConnectors method in object SchAppConnectable: Find all the connectors of this application object.
AppListGRRNames method in object SchAppComponent: Find all the valid graphical representation names of an application component.
AppListImages method in object SchAppMultiImageMaster: List the images of this master object.
AppListNames method in object SchAppCntrName: List connector names allowed.
AppListPotentialData method in object SchAppCntrData: Get a list valid potential application data that can be set.
AppListValidCntrTypes method in object SchAppConnectable: List the valid application connector types allowed to be created.
AppListValidRouteTypes method in object SchAppClass: List the valid application route types allowed to be created.
AppListZoneMembers method in object SchAppZone: List all members of an application zone.
AppLoadFeatFiles method in object SchAppEnvironment: Load all the necessary feat files.
AppOKToBranch method in object SchAppRoute: Query whether it is OK to create branch.
AppOKToBreak method in object SchAppRoute: Query whether it is OK to break.
AppOKToConcatenate method in object SchAppRoute: Query whether it is OK to concatenate.
AppOKToFlipConnected method in object SchAppComponent: Query whether it is OK to reconnect a component to a different compatible configuration.
AppOKToFlipHorizontal method in object SchAppComponent: Query whether it is OK to flip the application component about Y.
AppOKToFlipOnLine method in object SchAppComponent: Query whether it is OK to flip a component about its inserted line.
AppOKToFlipVertical method in object SchAppComponent: Query whether it is OK to flip the application component about X.
AppOKToModifyPoints method in object SchAppRoute: Query whether it is OK to modify (add or remove) the points.
AppOKToNoShowConnectedCntr method in object SchAppConnector: Query whether it is OK to no show the connector after it is connected.
AppOKToPlaceInSpace method in object SchAppComponent: Query whether the application component can be placed in free space.
AppOKToReplace method in object SchAppReplace: Query whether it is OK to replace an existing object (component, route.
AppOKToScale method in object SchAppComponent: Query whether it is OK to scale the application component.
AppOKToSlide method in object SchAppComponent: Query whether the application component can be slided.
AppOKToUninsert method in object SchAppComponent: Query whether it is OK to uninsert the application component.
AppOkToDelete method in object SchAppDeleteCheck2: Reports if an application object can be deleted.
AppOkToDeleteWithoutWarning method in object SchAppDeleteCheck: Reports if a warning message should be issued before deleting the object.
AppOpenLinkedDoc method in object SchAppCntrDocLink: Open a linked document.
AppPostBreakProcess method in object SchAppRoute: Post process after breaking an application route into 2 pieces.
AppPostConcatenateProcess method in object SchAppRoute: Post process after concatenate 2 application routes into one.
AppPostFlipConnectedProcess method in object SchAppComponent: Post process after reconnecting a component to a different compatible configuration.
AppPostFlipHorizontalProcess method in object SchAppComponent: Post process after flipping a component in "x".
AppPostFlipOnLineProcess method in object SchAppComponent: Post process after flipping an inserted component about the inserted line segment of the route.
AppPostFlipVerticalProcess method in object SchAppComponent: Post process after flipping a component in "y".
AppPostPlaceProcess method in object SchAppComponent: Post process after placing an application component instance.
AppPostReplaceProcess method in object SchAppReplace: Post process after replacing an object.
AppPostRouteProcess method in object SchAppRoute2: Post process after creating a route instance.
AppPostSlideProcess method in object SchAppComponent: Post process after sliding a component.
AppPostSwitchGraphicProcess method in object SchAppComponent: Post process after switching a component's graphic representation.
AppPostUninsertProcess method in object SchAppComponent: Post process after uninserting a component, disconnecting it from a route.
AppRemoveConnector method in object SchAppConnection: Remove a connector.
AppRemoveConnector method in object SchAppConnectable: Remove a connector.
AppRemoveZoneMember method in object SchAppZone: Remove an application connectable object to the zone as member.
AppSetApplicationData method in object SchAppCntrData: Set application data.
AppSetFlowCapability method in object SchAppCntrFlow: Set the application Flow Capability property of this connector.
AppSetFlowReality method in object SchAppCntrFlow: Set the application Flow Reality property of this connector.
AppSetReferenceName method in object SchAppConnectable: Set the reference name of a connectable.
AppShowCntr method in object SchAppCntrShow: Defines show status of the applicaton connector.
AppUnLink method in object SchAppCntrDocLink: Remove external link to another connector.
AppUpdate method in object SchAppMultiImage: Update the image object.
Append method in object Shots: Adds a shot to the end of the shots collection.
Append method in object Sampled: Returns or sets the Sampled object.
Append method in object PspListOfBSTRs: Adds a character string to the end of the list.
Append method in object PspListOfLongs: Adds an long integer to the end of the list.
Append method in object PspListOfObjects: Adds an object to the end of the list.
Append method in object PspListOfDoubles: Adds a double to the end of the list.
Append method in object SchListOfBSTRs: Adds a character string to the end of the list.
Append method in object SchListOfLongs: Adds an long integer to the end of the list.
Append method in object SchListOfObjects: Adds an object to the end of the list.
Append method in object SchListOfDoubles: Adds a double to the end of the list.
AppendAbsDatas method in object Shot: Appends to the data related to the shot.
AppendConstraint method in object HybridShapeFill: Appends an constraint to the hybrid shape fill feature object.
AppendContextChkB property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the AppendContextChkB attribute.
AppendDatas method in object Shot: Appends to the data related to the shot.
AppendFederatedElement method in object HybridShapeAssemble: Appends an init to the list of elements to federate.
AppendHybridShape method in object HybridBody: Appends a hybrid shape to the hybrid body.
AppendHybridShape method in object HybridShape: Appends a hybrid shape to another hybrid shape.
AppendNewFaceToKeep method in object HybridShapeFilletBiTangent: Append a new face to keep.
AppendNewPointAndParam method in object HybridShapeIntegratedLaw: Sets 'Point on spine' and associated parameter.
AppendOperation method in object ManufacturingProgram: Create and Insert a Manufacturing Operation of a specified type to a Manufacturing Program.
AppendOperationAfter method in object ManufacturingProgram2: Create and Insert a Manufacturing Operation of a specified type after the existing operation.
AppendOperationBefore method in object ManufacturingProgram2: Create and Insert a Manufacturing Operation of a specified type before the existing operation.
Applicability property in object Roughness: Retrieves or sets roughness applicability.
Application object: Represents the current CNext application and its frame window.
Application property in object AnyObject: Returns the application.
Application property in object Collection: Returns the application.
ApplicationID property in object PspObject: Returns the ApplicationID of the object.
ApplicationMode property in object PositionedMaterial: Returns the application mode of the material.
ApplicativeDataFilter property in object TreeTabSettingAtt
AppliedUnitSymbol property in object HybridShapeLawDistProj: Returns or sets the applied unit symbol for heterogeneous law.
Apply method in object Move: Applies a move transformation to a movable object.
ApplyBreakoutTo method in object DrawingViewGenerativeBehavior: If a view have gone through a breakout view operation, this method realize a breakout view on the view given as parameter, and the other types of the view remain.
ApplyCorrectedBaseOffset method in object CalibOffsets: Applies corrected base offset.
ApplyCorrectedToolOffset method in object CalibOffsets: Applies corrected tool offset.
ApplyJoin property in object IgesSettingAtt: Returns or sets the Apply join setting parameter value.
ApplyLabelEffToAltChild property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the ApplyLabelEffToAltChild attribute.
ApplyMaterialOnBody method in object MaterialManager: Apply a Material on a Body.
ApplyMaterialOnHybridBody method in object MaterialManager: Apply a Material on a Hybrid Body.
ApplyMaterialOnPart method in object MaterialManager: Apply a Material on a Part.
ApplyMaterialOnProduct method in object MaterialManager: Apply a Material on a Product.
ApplyMaterialOnUserMaterial method in object MaterialManager: Apply a Material on a User Material (Analysis entity).
ApplyNominalBaseOffset method in object CalibOffsets: Applies the nominal base offset.
ApplyNominalToolOffset method in object CalibOffsets: Applies nominal tool offset.
ApplyPosition method in object SWKBody: Sets a new relative manikin position.
ApplyPosition method in object SWKSegment: Applies a new relative position for the segment.
ApplyPosition method in object SWKLineOfSight: Applies a new relative position for the line of sight.
ApplyPostureToManikin method in object MoveToPostureActivity: Set the MoveToPosture(MTP) Activity's DegreeOfFreedom(DOF) values onto Manikin (which owns this MTP activity).
ApplyReferencedGeomColor method in object Annotation: Apply a color to referenced geometry.
ApplyReferencedInitColor method in object Annotation: Apply the initial color to referenced geometry.
ApplyResultWithLinkWhenCopySetTo method in object AnnotationSet: Register for next call to either GlobalCopySetTo and like methods.
ApplyUserSubroutine property in object ABQPressure: Sets or returns the user subroutine flag.
ApplyUserSubroutine property in object ABQTemperature: Sets or returns the user subroutine flag.
ApplyUserSubroutine property in object ABQFilmCondition: Sets or returns the user subroutine flag.
ApplyUserSubroutine property in object ABQMechConnBehavior: Sets or returns the user subroutine flag.
ApplyUserSubroutine property in object ABQConcentratedForce: Sets or returns the user subroutine flag.
ApplyUserSubroutine property in object ABQBoundaryCondition: Sets or returns the user subroutine flag.
ApplyViewReUseWhenCopySetTo method in object AnnotationSet: Register for next call to either GlobalCopySetTo and like methods.
ApplyWorkMode method in object Product: Applies a new working mode.
ArcSelectionActivation property in object TreeVizManipSettingAtt: Retrieves or Sets the arc-selection mode applied to the specification tree.
Area property in object Measurable: Returns the area of the surface or wet area from volume.
AreaHeigth property in object PrintArea: Valuates the heigth of the print area.
AreaLaw property in object HybridShapeLoft: Gets or sets the optional area law for multi-sections element definition.
AreaLawTolerance property in object HybridShapeLoft: Gets or sets the tolerance applied to area law.
AreaLowX property in object PrintArea: Valuates the low x coordinate of the print area.
AreaLowY property in object PrintArea: Valuates the low y coordinate of the print area.
AreaSamplesU property in object RenderingLight: Changes the number of samples taken in U direction of the area source.
AreaSamplesV property in object RenderingLight: Changes the number of samples taken in V direction of the area source.
AreaStatus property in object RenderingLight: Returns or sets the light area visibility status.
AreaType property in object PCBArea
AreaWidth property in object PrintArea: Valuates the width of the print area.
ArmAbducted property in object SWKErgoRULA: This property is True if the arm of the manikin is abducted, given the manikin's current posture.
ArmOutToSide property in object SWKErgoRULA: This property is True if the arm of the manikin is out to the side, given the manikin's current posture.
ArrBOMReport object
ArrBendableString object: The interface to access a CATIAArrBendableString Using this prefered syntax will enable mkdoc to document your class.
ArrNomenclature object: Represents the UserNomenclature object.
ArrNomenclatureTree object: Represents the root User Dictionary object.
ArrNomenclatureTree property in object ArrWorkbench: Returns the ArrNomenclatureTree.
ArrNomenclatures object: The collection of UserNomenclature objects.
ArrSystemLineProduct object: The interface to access a CATIAArrSystemLineProduct Using this prefered syntax will enable mkdoc to document your class.
ArrWorkbench object: Returns the Arrangement Workbench.
Arrange method in object Windows: Arranges all the windows of the collection.
ArrangementArea object: Use this object to access an ArrangementArea object's properties and functions.
ArrangementAreas object: A Collection object for ArrangementArea objects.
ArrangementAreas property in object ArrangementProduct: Returns the collection of ArrangementAreas under the current ArrangementProduct.
ArrangementBoundaries object: A collection object for ArrangementBoundary objects.
ArrangementBoundaries property in object ArrangementProduct: Returns the collection of ArrangementBoundaries under the current ArrangementProduct.
ArrangementBoundary object: Access properties and functions of an ArrangementBoundary object.
ArrangementContour object: The ArrangementContour object.
ArrangementContours object: A collection object for ArrangementContours of an Area.
ArrangementContours property in object ArrangementArea: Returns the ArrangementContours collection object associated with an ArrangementArea object.
ArrangementItemReservation object: Use this object to access the ArrangementItemReservation properties and methods.
ArrangementItemReservations object: A collection object for ArrangementItemReservation objects.
ArrangementItemReservations property in object ArrangementProduct: Returns the collection of ArrangementItemReservations under the current ArrangementProduct.
ArrangementNode object: This interface provides access to a CATIAArrangementNode object.
ArrangementNodes object: A Collection object for ArrangementNode objects.
ArrangementNodes property in object ArrangementRun: Returns the ArrangementNodes that make up the ArrangementRun.
ArrangementNodes property in object ArrangementPathway: Returns the ArrangementNodes that make up the ArrangementPathway.
ArrangementNodes property in object ArrangementBoundary: Returns the collection of ArrangementNodes that make up the ArrangementBoundary.
ArrangementPathway object: Use this object to access properties and methods of an ArrangementPathway object.
ArrangementPathways object: A collection object for ArrangementPathway objects.
ArrangementPathways property in object ArrangementProduct: Returns the collection of ArrangementPathways under the current ArrangementProduct.
ArrangementProduct object: Use this object as a factory for Arrangement collection objects.
ArrangementRectangle object: Use this object to access the properties and methods of an ArrangementRectangle object.
ArrangementRectangles object: A Collection object for ArrangementRectangle objects.
ArrangementRectangles property in object ArrangementProduct: Returns the collection of ArrangementRectangles under the current ArrangementProduct.
ArrangementRun object: Use this object to access the properties and methods of an ArrangementRun object.
ArrangementRuns object: A collection object of ArrangementRun objects.
ArrangementRuns property in object ArrangementProduct: Returns the collection of ArrangementRuns under the current ArrangementProduct.
Arrows property in object DrawingView: Returns the drawing arrow collection of the drawing view.
Arrows property in object Layout2DView: Returns the drawing arrow collection of the Layout2D view.
AskAnlMode property in object AnalysisSettingAtt: Returns or sets the AskAnlMode parameter.
AskBeforeOverwriteExistingParts property in object CDMASettingAtt: Retrieves or sets the enabling of asking before overwriting existing part.
AsmConstraintSettingAtt object: Represents the Assembly Constraints setting controller object.
AsmGeneralSettingAtt object: Represents the Assembly General setting controller object.
Assemble object: Represents the assemble boolean operation.
AssemblyAnnotationSets object
AssemblyBoolean object: Represents the AssemblyBoolean object.
AssemblyConvertor object: Product conversion object.
AssemblyFeature object: Represents the AssemblyFeature object.
AssemblyFeatures object: A collection of all the AssemblyFeature objects of a product.
AssemblyHole object: Represents the AssemblyHole object.
AssemblyPocket object: Represents the AssemblyPocket object.
AssemblySplit object: Represents the AssemblySplit object.
AssemblyType property in object ManufacturingToolAssembly: Returns the type of the tool assembly.
Assign3DState method in object DNB3DState: Assigns the 3D state to a specified process, based on the given condition.
AssignER method in object EKPServices: Assigns the passed geometric feature to the operation.
AssignERWithFTA method in object EKPServices: Assigns the passed FTA to the Operation .
AssignFastenerToProcess method in object DNBFastenerItemServices: Assigns a specified DELMIAFastener to a specified Activity and return the status of the action.
AssignFastenerToResource method in object DNBFastenerItemServices: Assigns a specified DELMIAFastener to a specified Resource and return the status of the action.
AssignedViewer property in object TreeTabSettingAtt
Asso_mode property in object V4WritingSettingAtt: Returns or sets the associativity mode of migration.
AssociateOutputCode method in object ManufacturingProgram: Method is used for associate APT file to V4 program iFileName = path for APT file.
AssociatedPartName property in object PCBHoleAndPattern: Allow to get and set the Associated Part of a hole The possible values are : the name of the instance of component in which the hole is defined.
AssociatedRefFrame object: Interface dedicated to manage Datum Reference Frame associated to a TPS.
AssociatedRefFrame method in object Annotation: Get the annotation on the AssociatedRefFrame interface.
AssociatedRefFrame method in object SemanticGDT: Role: Returns the annotation on the AssociatedRefFrame interface.
Associations property in object FunctMultiRepMgr: Get the Associations collection.
AssociativeElement property in object DrawingText: Returns or sets the associative object of the drawing text.
AsySimActivity object: Interface for a Delmia Simulation Activity.
AtEndOfLine property in object TextStream: Returns a boolean value which specifies if the index position in the stream is at a end of line.
AtEndOfStream property in object TextStream: Returns a boolean value which specifies if the index position in the stream is at a end of stream.
AthAnnotation property in object SimulationSettingAtt: Returns or sets the AthAnnotation setting attribute value.
AthDisableSim property in object SimulationSettingAtt: Returns or sets the AthDisableSim setting attribute value.
AthEndCondition property in object SimulationSettingAtt: Returns or sets the AthEndCondition setting attribute value.
AthHyperlink property in object SimulationSettingAtt: Returns or sets the AthHyperlink setting attribute value.
AthSelAgentDlg property in object SimulationSettingAtt: Returns or sets the AthSelAgentDlg setting attribute value.
AthStateMgt property in object SimulationSettingAtt: Returns or sets the AthStateMgt setting attribute value.
AthTextMsg property in object SimulationSettingAtt: Returns or sets the AthTextMsg setting attribute value.
AthViewpoint property in object SimulationSettingAtt: Returns or sets the AthViewpoint setting attribute value.
AttAP property in object StepSettingAtt: Returns or sets the AttAP parameter.
AttASM property in object StepSettingAtt: Returns or sets the AttASM parameter.
AttASMGVP property in object StepSettingAtt: Returns or sets the AttASMGVP parameter.
AttAngleDefFiting property in object StepSettingAtt: Returns or sets the AttAngleDefFiting parameter.
AttAnnotation property in object StepSettingAtt: Returns or sets the AttAnnotation parameter.
AttAnnotationExport property in object StepSettingAtt: Returns or sets the AttAnnotationExport parameter.
AttComposites property in object StepSettingAtt: Returns or sets the AttComposites parameter.
AttExportRepMode property in object StepSettingAtt: Returns or sets the AttExportRepMode parameter.
AttFitting property in object StepSettingAtt: Returns or sets the AttFitting parameter.
AttGVP property in object StepSettingAtt: Returns or sets the AttGVP parameter.
AttGVPCOPS property in object StepSettingAtt: Returns or sets the AttGVPCOPS parameter.
AttGVPCOPSSAG property in object StepSettingAtt: Returns or sets the AttGVPCOPSSAG parameter.
AttGVPCOPSTol property in object StepSettingAtt: Returns or sets the AttGVPCOPSSAG parameter.
AttGVPCdG property in object StepSettingAtt: Returns or sets the AttGVPCdG parameter.
AttGVPVA property in object StepSettingAtt: Returns or sets the AttGVPVA parameter.
AttGroupMode property in object StepSettingAtt: Returns or sets the AttGroupMode parameter.
AttHeaderAuthor property in object StepSettingAtt: Returns or sets the AttHeaderAuthor parameter.
AttHeaderAuthorisation property in object StepSettingAtt: Returns or sets the AttHeaderAuthorisation parameter.
AttHeaderDescription property in object StepSettingAtt: Returns or sets the AttHeaderDescription parameter.
AttHeaderOrganisation property in object StepSettingAtt: Returns or sets the AttHeaderOrganisation parameter.
AttIASM property in object StepSettingAtt: Returns or sets the AttIASM parameter.
AttLayersFilters property in object StepSettingAtt: Returns or sets the AttLayersFilters parameter.
AttMultiCAD property in object StepSettingAtt: Returns or sets the AttMultiCAD parameter.
AttOptimizeC2 property in object StepSettingAtt: Returns or sets the AttOptimizeC2 parameter.
AttReport property in object StepSettingAtt: Returns or sets the AttReport parameter.
AttShow property in object StepSettingAtt: Returns or sets the AttShow parameter.
AttTessPrefered property in object StepSettingAtt: Returns or sets the AttTessPrefered parameter.
AttTolDefOptFit property in object StepSettingAtt: Returns or sets the AttTolDefOptFit parameter.
AttUDA property in object StepSettingAtt: Returns or sets the AttUDA parameter.
AttUnits property in object StepSettingAtt: Returns or sets the AttUnits parameter.
Attach method in object Dressup: Attaches a given product to a link of the mechanism pointed by the dressup.
Attach method in object SWKSegment: Attach a geometry to the segment.
Attach method in object DNBAttachmentFactory
AttachSize property in object SWKSegment: Returns the number of objects currently attached to the segment.
AttachmentCont object: Interface representing xxx.
AttenuationAngleRatio property in object RenderingLight: Returns or sets the light attenuation angle ratio.
AttenuationStartRatio property in object RenderingLight: Returns or sets the light attenuation start ratio.
AttrCount property in object Activity: This property returns the number of attributes of the current activity.
AttrName method in object Activity: This method returns the name for the specified attribute.
AttrNames property in object PspConnector: Returns or Sets Attribute names of the connector.
AttrValue method in object Activity: This method returns the value for the specified attribute.
AttributeNames property in object PspPartConnector: Returns or sets a list of attribute names associated with this connector.
AttributesFilter property in object TreeTabSettingAtt
AugmentedLagrange property in object ABQMechConnBehavior: Sets or returns the augmented lagrange formulation in a mechanical connection.
AuthorName property in object IgesSettingAtt: Returns or sets the Author Name setting parameter value.
AuthorOrganization property in object IgesSettingAtt: Returns or sets the Author Organization setting parameter value.
AutoDraft object: Represents the AutoDraft shape.
AutoExpandActivation property in object TreeVizManipSettingAtt: Retrieves or Sets the automatic expand mode applied to the specification tree.
AutoFillet object: Represents the AutoFillet shape.
AutoHigh property in object CDMASettingAtt: Retrieves or sets the automatic highlight in PSN status.
AutoLoadMfgCtx property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the AutoLoadMfgCtx parameter.
AutoLoadSrvMfgCtx property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the AutoLoadSrvMfgCtx parameter.
AutoLoadVolCtx property in object MfgHubSettingAtt: Retrieves (or sets, if not initialized) the AutoLoadVolCtx parameter.
AutoPreviewMode property in object AnalysisPostProSettingAtt: Returns or sets the AutoPreviewMode parameter.
AutoReframeFilter property in object VerifTabSettingAtt
AutoSave property in object GeneralSessionSettingAtt: Returns the data save parameter.
AutoScaleStatus property in object RenderingEnvironmentWall: Returns or sets the texture automatic scaling status.
AutoScrollActivation property in object TreeVizManipSettingAtt: Retrieves or Sets the automatic scrolling mode applied to the specification tree.
AutoSwitchToDesignMode property in object AsmGeneralSettingAtt: Returns or sets the implicit switch from visualization mode to design mode setting parameter .
AutoThicknessThreshold property in object HybridShapeMidSurface: Returns or sets AutoThicknessThreshold.
AutoTimeIncrementMethod enum: Time increment estimator methods for automatic time incrementation.
AutoTimeIncrementMethod property in object ABQExplicitDynamicsStep: Sets or returns the automatic time increment estimator method.
AutoUpdateMode property in object AsmGeneralSettingAtt: Returns or sets the automatic update setting parameter.
AutoWalkActColor property in object HtsTaskDisplaySettingAtt: Returns or sets the AutoWalkActColor parameter.
AutoWalkActLineType property in object HtsTaskDisplaySettingAtt: Returns or sets the AutoWalkActLineType parameter.
AutoWalkActLineWeight property in object HtsTaskDisplaySettingAtt: Returns or sets the AutoWalkActLineWeight parameter.
AutoWalkActivity object
AutomaticCorrect property in object ExpertCheckRuntime: Returns or sets the status of the automatic correction facility.
AutomaticExtrapolationMode property in object HybridShapeTrim: Gets or sets the automatic extrapolation mode status.
AutomaticExtrapolationMode property in object HybridShapeSplit: Gets or sets the automatic extrapolation mode status.
AutomatizedCCP property in object HtsCCPSettingAtt: Returns or sets the AutoCCP parameter.
AuxDevicesMgt object
AuxiliaryDrillViewer property in object VisualizationSettingAtt: Returns the AuxiliaryDrillViewer parameter.
AvilableDisplayFactor property in object NumericalDisplayFormat: Retrieves or sets the maximun level of factor available to be displayed.
Axis property in object Rotate: Returns or sets the rotation axis.
Axis property in object HybridShapeHelix: Reads / Changes the Helix axis.
Axis property in object HybridShapeRevol: Role: To get_Axis on the object.
Axis property in object HybridShapeSphere: Returns or sets axis on the object.
Axis property in object HybridShapeSpiral: Reads / Changes the Spiral axis (Reference direction).
Axis property in object HybridShapeRotate: Returns or sets the rotation axis.
Axis property in object HybridShapeCircleCenterAxis: Returns or sets the Axis of the circle.
Axis2D object: Interface defining a coordinate system in the 2D Space.
AxisComputation property in object HybridShapeCircle: Returns or sets the axis computation mode.
AxisDirection property in object HybridShapeCircle: Role: To get_Direction on the object.
AxisFirstDirection property in object HybridShapeAffinity: Returns or sets the first direction of the reference coordinate system.
AxisLineType property in object HybridShapeAxisLine: Returns or sets the axis line type.
AxisOrigin property in object HybridShapeAffinity: Returns or sets the origin of the reference coordinate system.
AxisPlane property in object HybridShapeAffinity: Returns or sets the reference plane of the reference coordinate system.
AxisRotationAngle property in object AxisSystem: Returns the rotation angle of an axis system.
AxisRotationReference property in object AxisSystem: Returns the reference for the axis rotation.
AxisSystem object: The object Axis System A axis system has got one origin point and three orthogonal axes, crossing at the origin point.
AxisSystemSize property in object PartInfrastructureSettingAtt: Returns or sets the "AxisSystemSize" parameter.
AxisSystems object: A collection of all the AxisSystem objects contained in the part.
AxisSystems property in object Part: Returns the collection object containing the coordinate systems.
AxisToAxis object: Represents the hybrid shape AxisToAxis feature object.
Axis_sys property in object ABQDamperConnectionProperty: Sets or returns the axis system in the Damper connection property.
Axis_sys property in object ABQSpringConnectionProperty: Sets or returns the axis system in the spring connection property.