IDL API Master Index

E

E5Property object: Interface to access object properties.
EHMInsertionActPlugMapViewData object: Interface to access Plug Map view data associated to an Insertion activity.
EHSUpdateSmoothnessFactor object: Interface representing xxx.
EKPServices object: Interface to assign and remove Engineering Requirements to and from an activity.
ELPS property in object GeneralStatisticsSettingAtt: Returns or sets the state ot the elapsed time field.
EchoPrint property in object ABQJob: Sets or returns whether an echo of the input data is printed.
Edge object: 1-D boundary.
EdgeFillet object: Represents the edges-based fillet shape.
EdgeInTessMode property in object StepSettingAtt: Returns or sets the EdgeTessMode parameter.
EdgePreparation property in object SfmWeld: Gets Edge Preparation.
EdgePropagation property in object EdgeFillet: Returns or sets the edge fillet propagation mode.
EdgeToTearPositioningOrientation property in object HybridShapeUnfold: Returns or sets the positioning orientation when the reference origin is located on an edge to tear.
EdgesToFillet property in object VarRadEdgeFillet: Returns the collection of edges to be filleted.
EdgesToKeep property in object EdgeFillet: Returns the collection of edges to keep by the edge fillet.
EditDedicatedFilterDialogBox property in object Layout2DSettingAtt: Returns the EditDedicatedFilterDialogBox parameter.
EigensolverValue property in object ABQFrequencyStep: Returns or sets Eigensolver Value.
ElecSchWire object: For technical electrical wire attributes.
ElecSchematicChildren property in object ElecSchematicObject: This method returns the collection of Electrical Schematic Object's Children (component in Pipe Line, Assembly).
ElecSchematicObject object: Represents the electrical schematic objects.
ElecSchematicParent property in object ElecSchematicObject: This method returns the electrical schematic parent.
ElectronicType property in object PCBObject: Allow to know if : a Product is a BOARD, a PANEL or a COMPONENT, a Hole is a PBD Hole a pattenr is a PCB pattern, a Pad is a contraint area.
Elem method in object FunctScripts: Returns an association using its index or its name from the Scripts collection.
Elem property in object HybridShapeExtract: Returns or sets the sub element used as init for the propagation.
Elem method in object FunctionalObjects: Returns an action using its index or its name from the actions collection.
Elem method in object FunctionalActions: Returns an action using its index or its name from the actions collection.
Elem method in object FunctAssociations: Returns an association using its index or its name from the associations collection.
Elem method in object FunctFacetManagers: Returns a facet manager using its index or its name from the facet managers collection.
Elem method in object FunctionalVariants: Returns a Variant using its index or its name from the Variants collection.
Elem method in object FunctActionsGroups: Returns an actions'group using its index or its name from the actions' groups collection.
Elem1 property in object HybridShapeCombine: Returns or sets the first curve used to create the combined curve.
Elem1 property in object HybridShapeLineBisecting: Returns or sets the first line used to create the bisecting line.
Elem2 property in object HybridShapeCombine: Returns or sets the second curve used to create the combined curve.
Elem2 property in object HybridShapeLineBisecting: Returns or sets the second line used to create the bisecting line.
ElemToCut property in object HybridShapeSplit: Returns or sets the element to cut.
ElemToExtrapol property in object HybridShapeExtrapol: Returns or sets the curve or surface to extrapolate.
ElemToProject property in object HybridShapeProject: Returns or sets the element to project.
ElemToRotate property in object HybridShapeRotate: Retuns or sets the element to be rotated.
ElemToScale property in object HybridShapeScaling: Returns or sets the element to scale.
ElemToSymmetry property in object HybridShapeSymmetry: Returns or sets the element to transform.
ElemToTransform property in object HybridShapeAffinity: Returns or sets the element to transform using the affinity.
ElemToTransform property in object HybridShapeAxisToAxis: Returns or sets the element to transform.
ElemToTranslate property in object HybridShapeTranslate: Returns or sets the element to translate.
ElemUntil property in object HybridShapeExtrapol: This method is left available for compatibility reasons but it is preferable to use the GetElemUntil method instead.
Element property in object HybridShapeInverse: Role: To get the element inverted.
Element property in object HybridShapeAxisLine: Returns or sets the element from which axis is computed.
Element property in object HybridShapePointCenter: Returns or sets the circle, ellipse or sphere.
Element1 property in object HybridShapeIntersection: Returns or sets the first element to intersect.
Element1 property in object HybridShapeCircle3Points: Returns or sets the circle first passing point.
Element2 property in object HybridShapeIntersection: Returns or sets the second element to intersect.
Element2 property in object HybridShapeCircle3Points: Returns or sets the circle second passing point.
Element2 property in object HybridShapeLineBiTangent: Returns or Sets the second tangency element (point, curve) lying on the support surface.
Element3 property in object HybridShapeCircle3Points: Returns or sets the circle third passing point.
ElementToTransfer property in object HybridShapeTransfer: Returns or sets the element to transfer.
ElementsToChamfer property in object Chamfer: Returns the collection of geometrical elements to be chamfered.
Ellipse2D object: Class defining an ellipse in 2D Space.
EllipsesDisplayed property in object SWKBody: Returns or sets the display of the manikin ellipses.
EnableAnlMode property in object AnalysisSettingAtt: Returns or sets the EnableAnlMode parameter.
EnableDirectV5VaultSave property in object CDMASettingAtt: Retrieves or sets the enabling of the direct V5 Vault save.
EnableHeartBeat property in object RobAnalysisHeartBeatUsageSettingAtt: Role:Enables or Disables the Heart Beat Rate while the robot motion is planned return E_FAIL.
EnableNewUndoRedoTransaction method in object Application: Allows new Undo/Redo transaction creation.
EndAngle property in object HybridShapeRevol: Role: To get_EndAngle on the object.
EndAngle property in object HybridShapeCircle: Returns the circle end angle.
EndAngleOffset property in object HybridShapeRevol: Gets/Sets the second angle offset value of second upto element.
EndBlock method in object ManufacturingOutput: Specify that the Block is ended.
EndCutESSObjectSettingAtt object: The interface to access a CATIAEndCutESSObjectSettingAtt.
EndDate property in object Activity: This property returns the end date of the current activity.
EndDistance property in object RenderingLight: Returns or sets the light maximum distance of illumination.
EndEffector property in object SWKIKConstraint: Returns or sets the end effector of the IK chain of the constraint.
EndEndCutName property in object StrObjectExt: Returns the End EndCut name of the SR1 object.
EndEndCutName property in object SfmObjectExt: Returns the End EndCut name of the structural object.
EndExtremity property in object StrMember: Returns the member's end extremity object.
EndExtremityContinuity property in object HybridShapeCurveSmooth: Returns or sets the continuity condition (curvature, tangency or point) applied to the smoothed curve with regard to the input curve at the end extremity of the input curve.
EndInstanceFactory method in object InstanceFactory: Ends the instantiation process.
EndInstantiate method in object InstanceFactory: Ends the instantiation of the reference.
EndLine method in object ManufacturingOutput: Specify that the line is ended.
EndMeridianAngle property in object HybridShapeSphere: Returns EndMeridianAngle on the object.
EndOffset property in object HybridShapeExtrude: Role: To get_EndOffset on the object.
EndOffset property in object HybridShapeLinePtPt: Returns the end length of the line.
EndOffset property in object HybridShapeLinePtDir: Returns the end length of the line.
EndOffset property in object HybridShapeLineAngle: Role: Get the end length of the line.
EndOffset property in object HybridShapeLineNormal: Returns the end length of the line.
EndOffset property in object HybridShapeLineTangency: Returns the end length of the line.
EndOffset property in object HybridShapeLineBisecting: Returns the end offset of the line.
EndParallelAngle property in object HybridShapeSphere: Returns EndParallelAngle on the object.
EndParam property in object HybridShapeIntegratedLaw: Gets end parameter.
EndPoint property in object HybridShapeConic: Returns or sets the conic end point.
EndPoint property in object Curve2D: Returns the end point of the curve.
EndPointOnCrvCurve property in object SfmMember2Points
EndPointOnCrvMode property in object SfmMember2Points
EndPointOnCrvOffset property in object SfmMember2Points
EndPointOnCrvOffsetParam property in object SfmMember2Points
EndPointOnCrvOrientation property in object SfmMember2Points
EndPointSpec property in object SfmMember2Points
EndPositionX property in object SWKSegment: Returns the global x coordinate of the endpoint of the segment.
EndPositionY property in object SWKSegment: Returns the global y coordinate of the endpoint of the segment.
EndPositionZ property in object SWKSegment: Returns the global z coordinate of the endpoint of the segment.
EndStepNum property in object ABQTemperatureHistory: Sets or returns the step number at which to stop reading the temperature data.
EndStepOnTempChange property in object ABQHeatTransferStep: Sets or returns whether the step should end when steady state is reached.
EndTangent property in object HybridShapeConic: Returns or sets the tangent direction at the conic end point.
EndingAngle property in object HybridShapeSpiral: Reads / Changes the Ending Angle of the Spiral.
EndingRadius property in object HybridShapeSpiral: Reads / Changes the ending radius of the Spiral.
EnergyFactor property in object RenderingLight: Changes the factor for indirect illumination energy.
EnergyFraction property in object ABQGeneralStaticStep: eturns or sets the EnergyFraction if the stabilization method is DISSIPATION.
EngineInterface property in object RenderingSettingAtt: Returns or sets the EngineInterface parameter.
Entities property in object BasicComponent: Returns the collection of Entities agregated by the basic component.
EnumParam object: Represents the enum parameter.
EnvelopCondition object: Interface for accessing Envelop Condition modifier on a TPS.
EnvelopCondition method in object Annotation: Get the annotation on the EnvelopCondition interface.
EnvelopCondition method in object Dimension3D: Gets the Dimension on the EnvelopCondition interface.
Environ method in object SystemService: Returns the value of an environment variable.
EnvironmentImage property in object RenderingMaterial: Returns or sets the environment image pathname of a material.
EquallySpacedIncr property in object ABQFHOutputRequest: For explicit dynamic step: Sets request for output results at equally spaced increments.
Ergo property in object SWKManikin: Returns the ergonomic analysis of the current manikin.
ErrorMessage property in object PspPlacePart: Returns the message associated with the last error.
ErrorlogStatisticsSettingAtt object: Interface for Errorlog statistic Controler.
Evaluate method in object SystemService: Evaluates a scripted function.
Evaluate method in object Sketch: Evaluate the constraint system of the sketch.
EveryXIncrOfTime property in object ABQFHOutputRequest: For explicit dynamic step: Sets request for output results at every specified units of time.
ExecLogPath property in object PPGExecLogSettingAtt: Returns or sets the Xxx parameter.
ExecuteBackgroundProcessus method in object SystemService: Executes an asynchronous process.
ExecuteProcessus method in object SystemService: Executes a synchronous process.
ExecuteScript method in object SystemService: Executes a scripted function.
ExistAnalysisData method in object Material: Returns true if a analysis material exists on the current material.
ExistCompositesData method in object CompositesMaterial: Returns true if a composites properties exists on the current material.
ExistRenderingData method in object Material: Returns true if a rendering material exists on the current material.
ExistingTaskTreatment property in object IgpOlpSettingAtt: Returns or sets value of OLP Existing Task Treatment On Upload parameter.
ExistsInScene method in object ProductScene: Returns whether the product has overloaded attributes in the Product-Scene.
ExpNotationValuesGreater property in object UnitsSheetSettingAtt: Returns or sets the ExpNotationValuesGreater parameter.
ExpNotationValuesLower property in object UnitsSheetSettingAtt: Returns or sets the ExpNotationValuesLower parameter.
ExpandMode property in object CD5Engine: Returns (gets) or sets the value of the Open option "Expand Mode".
ExpandSketchBasedFeaturesNodeAtCreation property in object PartInfrastructureSettingAtt: Returns or sets the "ExpandSketchBasedFeaturesNodeAtCreation" parameter.
ExpertCheck object: Represents the edition part of a check.
ExpertCheckRuntime object: Runtime part of a check.
ExpertReportObject object: Represents the ExpertReportObject object.
ExpertReportObjects object: Represents the collection of (succeeded or failed) report objects.
ExpertRule object: Represents the edition part of a rule.
ExpertRuleBase object: Represents the RuleBase object that can be edited.
ExpertRuleBaseComponentRuntime object: Represents a rule base component in a ruleset.
ExpertRuleBaseComponentRuntimes object: Represents the collection of ExpertRuleBase (ExpertChecks, ExpertRules, and ExpertRuleSets) components.
ExpertRuleBaseComponentRuntimes property in object ExpertRuleSetRuntime: Returns the list of the RuleBaseComponent.
ExpertRuleBaseRuntime object: Represents the Runtime part of the RuleBase.
ExpertRuleRuntime object: Represents the ExpertRuleRuntime object.
ExpertRuleSet object: Represents the ExpertRuleSet object which is the editable part of a RuleSet or a RuleBase.
ExpertRuleSetRuntime object: Represents the ExpertRuleSet object in the RelationSet.
Explode method in object DrawingComponent: Explodes the drawing component instance (every sub elements of the drawing component are created).
ExplodeAndSelect method in object DrawingComponent: Explodes the drawing component instance (every sub elements of the drawing component are created) and put created sub elements in selection set.
Export method in object TCPTrace: Export the TCP trace data in a file.
Export method in object Clash: Exports the results in a XML file.
Export method in object Section: Exports the sections curves of the section in a document.
Export method in object AnalysisExport: Export computed loads/displacements as a CATAnalysisExport file.
Export method in object ClashResult: Exports the results in a XML file.
Export3DXmlSettingAtt object: Represents a setting controller for the 3D XML export settings.
ExportBlocks property in object DxfSettingAtt: Get the value of the Export Blocks option.
ExportCATSetting method in object ManufacturingSetup: ExportCATSetting.
ExportData method in object Document: Exports the data contained in the document to another format.
ExportData method in object AnalysisImage: Extracts image results.
ExportDataInAnyUserAxis method in object AnalysisImage: Extracts image results.
ExportDataInGlobalAxis method in object AnalysisImage: Extracts image results.
ExportDataInManualAxis method in object AnalysisImage: Extracts image results.
ExportDataInUserAxis method in object AnalysisImage: Extracts image results.
ExportDataWithMeshPartId method in object AnalysisImage: Extracts image results and location with mesh part name (as identifier).
ExportDimensionsAsDimensions property in object DxfSettingAtt: Get the value of the Export Dimensions As Dimensions option.
ExportEdges property in object VrmlSettingAtt: Returns or sets the ExportEdges parameter (exported Vrml files will or will not contains edge informations).
ExportGroupImageData method in object ABQImageQuery: Method to export image data in text or excel format for a group.
ExportImageData method in object ABQImageQuery: Method to export image data in text or excel format.
ExportLayerName property in object DxfSettingAtt: Get the value of the Export Layer Name option.
ExportMSBO property in object IgesSettingAtt: Returns or sets the Export Solid Mode setting parameter value.
ExportMode property in object Ig2SettingAtt: Get the Export Mode option value.
ExportMode property in object DxfSettingAtt: Get the Export Mode option value.
ExportNormals property in object VrmlSettingAtt: Returns or sets the ExportNormals parameter (exported Vrml files will or will not contains normal informations).
ExportProperties method in object PspWorkbench: This method extracts property values of the current document to an output XML file.
ExportSheets property in object Ig2SettingAtt: Get the Exported Sheets option value.
ExportSheets property in object DxfSettingAtt: Get the Exported Sheets option value.
ExportTexture property in object VrmlSettingAtt: Returns or sets the ExportTexture parameter (exported Vrml files will or will not contains texture informations).
ExportTextureFile property in object VrmlSettingAtt: Returns or sets the ExportTextureFile parameter (Textures will be exported in the vrml file containing the geometry or in external files).
ExportTextureFormat property in object VrmlSettingAtt: Returns or sets the ExportTextureFormat parameter.
ExportUnit property in object IgesSettingAtt: Returns or sets the Export Units setting parameter value.
ExportVersion property in object VrmlSettingAtt: Returns or sets the ExportVersion parameter (version of exported Vrml files).
ExportVersion property in object DxfSettingAtt: Get the Export Version option value.
ExportViewAsViewport property in object Ig2SettingAtt: Get the value of the Export Views as Viewports option.
ExportViewAsViewport property in object DxfSettingAtt: Get the value of the Export Views as Viewports option.
ExposeCompRef method in object DrawingComponent: Exposes the component reference of this drawing component instance in a new detail sheet.
ExposeCompRefInSheet method in object DrawingComponent: Exposes the component reference of this drawing component instance in a specific detail sheet.
ExtLineSlant property in object DrawingDimExtLine: Returns or sets slant angle of extension line.
ExtLineType property in object DrawingDimExtLine: Returns extension line type of dimension.
ExtendEdgesMode property in object HybridShapeExtrapol: Returns or sets the extension of extrapolated edges mode.
ExtendMode property in object HybridShapeIntersection: Returns or sets the ExtendMode flag for intersect.
ExtendProductAsFoundation method in object StrObjectFactory: Extend an assembly as a structure foundation assembly.
ExtensionClass property in object BehaviorExtension: Returns the type of the technological object associated to this behavior extension.
ExternalMaxDeformation property in object V4V5SpaceSettingAtt: Returns or sets the activation state of mode with external deformation (Gap Healing).
ExternalReferencesAsVisible property in object PartInfrastructureSettingAtt: Returns or sets the "ExternalReferencesAsVisible" parameter.
ExternalReferencesAssemblyRootContext property in object PartInfrastructureSettingAtt: Returns or sets the "ExternalReferencesAssemblyRootContext" parameter.
ExternalReferencesNodeInTree property in object PartInfrastructureSettingAtt: Returns or sets the "ExternalReferencesNodeInTree" parameter.
ExternalThickness property in object Shell: Returns the shell external thickness.
ExternalTypeDeformation property in object V4V5SpaceSettingAtt: Returns or sets the activation state of type for external deformation (Gap Healing).
ExtractBOM method in object Product: Extracts the product's contents as a bill of materials (BOM).
ExtractHTMLReport method in object AnalysisPostManager
ExtractMode property in object Group: Returns or sets the mode for the extraction methods.
ExtrapolBothSidesIdentically property in object HybridShapeExtrapol: Returns or sets the the boolean telling if the second side is extrapolated according to the first side's settings or to its own ones.
ExtrapolateMode property in object HybridShapeIntersection: Returns or sets the ExtrapolateMode flag for intersect.
ExtrapolationMode property in object HybridShapeProject: Returns or sets the extrapolation mode.
ExtrapolationType property in object HybridShapeSplit: Gets or sets the extrapolation type.
ExtremumType property in object HybridShapeExtremum: Returns or sets the extremum type.
ExtremumType property in object HybridShapeExtremumPolar: returns or sets the type of extremum.
ExtremumType2 property in object HybridShapeExtremum: Returns or sets the extremum type of the second direction.
ExtremumType3 property in object HybridShapeExtremum: Returns or sets the extremum type of the third direction.
ExtrudedObject property in object HybridShapeExtrude: Role: To get_ExtrudedObject on the object.
elemBehavEnum enum
elemIDEnum enum