IDL Interface Index

A

ABQAnalysisCase object: Represents an Abaqus analysis case (ABQAnalysisCase) object.
ABQAnalysisCases object
ABQAnalysisModel object: Represents the Abaqus analysis model object.
ABQAnalyticalRigidSurface object: Represents an Abaqus Analytical rigid surface (ABQAnalyticalRigidSurface) object.
ABQBoundaryCondition object: Represents the base interface for Abaqus boundary condition objects.
ABQBoundaryConditions object
ABQClampBC object: Represents an Abaqus clamp (ABQClamp) object.
ABQConcentratedForce object: Represents an Abaqus concentrated force object (ABQConcentratedForce).
ABQDamperConnectionProperty object: Represents an Abaqus Damper connection property (ABQDamper) object.
ABQDataOutputRequest object: Represents an Abaqus data output request (ABQDataOutputRequest) object.
ABQDataOutputRequests object
ABQDisplacementBC object: Represents an Abaqus displacement boundary condition (ABQDisplacementBC) object.
ABQDisplayGroup object: Represents an Abaqus display group (ABQDisplayGroup) object.
ABQDisplayGroups object
ABQExplicitDynamicsStep object: Represents an Abaqus explicit dynamics step (ABQExplicitDynamicsStep) object.
ABQFHOutputRequest object: Represents the base interface for field and history output request objects.
ABQFastenedConnectionEnhancement object: This interface has been deprecated.
ABQFastenedPair object: Represents an Abaqus Fastened Pair (ABQFastenedPair) object.
ABQFieldOutputRequest object: Represents an Abaqus field output request (ABQFieldOutputRequest) object.
ABQFieldOutputRequests object
ABQFields object
ABQFilmCondition object: Represents an Abaqus film condition (ABQFilmCondition) object.
ABQFrequencyStep object: Represents an Abaqus frequency step (ABQFrequencyStep) object.
ABQGasketProperty object
ABQGeneralStaticStep object: Represents an Abaqus general static step (ABQGeneralStaticStep) object.
ABQGlobalElementAssignment object: Represents an Abaqus Global Element assignment (ABQGlobalElementAssignment) object.
ABQGravity object: Represents an Abaqus gravity (ABQGravity) object.
ABQHeatTransferStep object: Represents an Abaqus heat transfer step (ABQHeatTransferStep) object.
ABQHistoryOutputRequest object: Represents an Abaqus history output request (ABQHistoryOutputRequest) object.
ABQHistoryOutputRequests object
ABQIAABQBaseMotionVB object: Interface representing xxx.
ABQIAABQFrequencyLoadingVB object: Interface representing xxx.
ABQIAABQSteadyStateLinDynStepBasicVB object: Interface representing xxx.
ABQIAABQSteadyStateLinDynStepModalVB object: Interface representing xxx.
ABQIAABQSteadyStateLinDynStepSubspaceVB object: Interface representing xxx.
ABQImageQuery object: Provides an image query object.
ABQInitialStep object: Represents an Abaqus initial step (ABQInitialStep) object.
ABQInitialTemperature object: Represents an Abaqus initial temperature object (ABQInitialTemperature).
ABQInteraction object: Represents the base interface for Abaqus interaction objects.
ABQInteractions object
ABQJob object: Represents an Abaqus job (ABQJob) object.
ABQJobs object: The collection of Abaqus (ABQJob) objects.
ABQLoad object: Represents the base interface for all load objects.
ABQLoads object
ABQMassScaling object: Represents an Abaqus Mass Scaling entity.
ABQMassScalings object
ABQMechConnBehavior object: Represents an Abaqus mechanical connection behavior (ABQMechConnBehavior) object.
ABQOutputRequest object: Represents the base interface for all output request objects.
ABQOutputRequests object
ABQPressure object: Represents an Abaqus pressure (ABQPressure) object.
ABQPretensionProperty object: Represents a pretension property (ABQPretensionProperty) object.
ABQProperties object
ABQProperty object: Represents the base interface for all Abaqus property objects.
ABQRigidBodyConstraint object: Represents an Abaqus rigid body constraint (ABQRigidBodyConstraint) object.
ABQRigidCoupling object: Represents an Abaqus rigid coupling (ABQRigidCoupling) object.
ABQSmoothCoupling object: Represents an Abaqus smooth coupling (ABQSmoothCoupling) object.
ABQSmoothStepAmplitude object: Represents a smooth step amplitude (ABQSmoothStepAmplitude) object.
ABQSolutionCase object: Represents an Abaqus solution case (ABQSolutionCase) object.
ABQSolutionCaseImages object
ABQSolutionStep object: Represents an Abaqus solution step (ABQSolutionStep) object.
ABQSolutionStepImages object
ABQSolutionSteps object
ABQSpringConnectionProperty object: Represents an Abaqus spring connection property (ABQSpring) object.
ABQStep object: Represents a Abaqus analysis step (ABQStep) object.
ABQSteps object
ABQSurfaceToSurfaceContact object: Represents an Abaqus contact pair (ABQSurfaceToSurfaceContact) object.
ABQTabularAmplitude object: Represents a tabular amplitude (ABQTabularAmplitude) object.
ABQTemperature object: Represents an Abaqus temperature object (ABQTemperature).
ABQTemperatureBC object: Represents an Abaqus Temperature boundary condition (ABQTemperatureBC) feature.
ABQTemperatureHistory object: Represents an Abaqus temperature history object (ABQTemperatureHistory).
ABQThermalConnBehavior object: Represents an Abaqus thermal connection behavior (ABQThermalConnBehavior) object.
AMPPath object: This interface provides the methods to handle the feature AMPPath which is a list of AMPTags.
AMPTag object: This interface provides the methods to handle the feature AMPTag.
ARCTag object: Interface representing a Tag.
ARCTagGroup object: Interface representing a Tag.
AccesslogStatisticsSettingAtt object: Interface for Accesslog statistic Controler.
ActiveTask object: Represents the Active task of the resource in conjunction with a particular activity.
Activities object: The collection of activities related to the current activity.
Activity object: The object that represents an activity.
Add object: Represents the add, or union boolean operation.
Affinity object: Represents the hybrid shape Affinity feature object.
AnalysisAdaptivityManager object: The interface to access a CATIAAnalysisAdaptivityManager.
AnalysisCase object: Represent the analysis case object.
AnalysisCases object: The collection of analysis case making an Analysis.
AnalysisColorMap object: Represents the Color Map Object of the post-processing Image Object.
AnalysisDocument object: Represents the document object for analysis.
AnalysisEntities object: The collection of analysis entities.
AnalysisEntity object: Represent the analysis entity object.
AnalysisExport object
AnalysisGeneralSettingAtt object: Interface to handle the Analysis & Simulation "GeneralSetting".
AnalysisGlobalSensor object: Represent the analysis global sensor.
AnalysisImage object: Represents the analysis image object.
AnalysisImages object: The collection of analysis images.
AnalysisImport object
AnalysisLinkedDocuments object: The collection of Documents linked by Analysis.
AnalysisLocalEntities object: The collection of local analysis entities.
AnalysisLocalEntity object: Represent the analysis local entity object.
AnalysisLocalSensor object: Represent the analysis local sensor.
AnalysisManager object: Represents the root object inside an analysis document.
AnalysisMaterial object: Represents an AnalysisMaterial object.
AnalysisMeshElement object: The interface to access a CATIAAnalysisSelectedElement.
AnalysisMeshLocalSpecification object: The interface to access a CATIAAnalysisMeshLocalSpecification.
AnalysisMeshLocalSpecifications object: The interface to access a AnalysisMeshLocalSpecifications.
AnalysisMeshManager object: The interface to access a CATIAAnalysisMeshManager.
AnalysisMeshNode object: The interface to access a CATIAAnalysisSelectedNode.
AnalysisMeshPart object: The interface to access a CATIAAnalysisMeshPart.
AnalysisMeshParts object: The collection of analysis meshparts.
AnalysisModel object: Represent the analysis model object.
AnalysisModels object: The collection of analysis models making an analysis document.
AnalysisOutputEntities object: The collection of analysis entities results of a set.
AnalysisPostManager object: Interface to define the Post Processing Manager.
AnalysisPostProANRSettingAtt object: Interface to handle the Analysis & Simulation "PostProcessingSetting".
AnalysisPostProSettingAtt object: Interface to handle the Analysis & Simulation "PostProcessingSetting".
AnalysisReportingSettingAtt object: Interface to handle the Analysis & Simulation "ReportingSetting".
AnalysisSensor object: Represent the analysis sensor.
AnalysisSet object: Represent the analysis set object.
AnalysisSets object: The collection of analysis sets.
AnalysisSettingAtt object: Interface to handle parameters of DELMIA Analysis Tools Options Tab page Role: This interface is implemented by a component which represents the controller of Analysis Tools Options parameter settings.
AnalysisSupports object: The collection of analysis case making an Analysis.
AnalysisV4Services object: The interface to access a CATIAAnalysisV4Services.
Analyze object: Represents the analysis object associated with a product.
Angle object: Represents the angle parameter.
AngularRepartition object: Represents the angular repartition.
AnnotatedView object: Represents an annotated view.
AnnotatedViews object: A collection of AnnotatedView objects.
Annotation object: Interface for the Technological Product Specification (TPS) objects.
Annotation2 object: Interface for the Technological Product Specification (TPS) objects.
AnnotationFactory object: Interface for the TPS Factory.
AnnotationFactory2 object: Interface for the TPS Factory.
AnnotationSet object: Interface for the TPS Set of objects.
AnnotationSetTransformIntoAssemblySet object: Interface designed to transform an annotation set into an assembly annotation set.
AnnotationSets object
Annotations object: Interface for collection of TPS objects CATIAAnnotation.
AnyObject object: Represents the base object for all other objects except collection and reference objects.
Application object: Represents the current CNext application and its frame window.
ArrBOMReport object
ArrBendableString object: The interface to access a CATIAArrBendableString Using this prefered syntax will enable mkdoc to document your class.
ArrNomenclature object: Represents the UserNomenclature object.
ArrNomenclatureTree object: Represents the root User Dictionary object.
ArrNomenclatures object: The collection of UserNomenclature objects.
ArrSystemLineProduct object: The interface to access a CATIAArrSystemLineProduct Using this prefered syntax will enable mkdoc to document your class.
ArrWorkbench object: Returns the Arrangement Workbench.
ArrangementArea object: Use this object to access an ArrangementArea object's properties and functions.
ArrangementAreas object: A Collection object for ArrangementArea objects.
ArrangementBoundaries object: A collection object for ArrangementBoundary objects.
ArrangementBoundary object: Access properties and functions of an ArrangementBoundary object.
ArrangementContour object: The ArrangementContour object.
ArrangementContours object: A collection object for ArrangementContours of an Area.
ArrangementItemReservation object: Use this object to access the ArrangementItemReservation properties and methods.
ArrangementItemReservations object: A collection object for ArrangementItemReservation objects.
ArrangementNode object: This interface provides access to a CATIAArrangementNode object.
ArrangementNodes object: A Collection object for ArrangementNode objects.
ArrangementPathway object: Use this object to access properties and methods of an ArrangementPathway object.
ArrangementPathways object: A collection object for ArrangementPathway objects.
ArrangementProduct object: Use this object as a factory for Arrangement collection objects.
ArrangementRectangle object: Use this object to access the properties and methods of an ArrangementRectangle object.
ArrangementRectangles object: A Collection object for ArrangementRectangle objects.
ArrangementRun object: Use this object to access the properties and methods of an ArrangementRun object.
ArrangementRuns object: A collection object of ArrangementRun objects.
AsmConstraintSettingAtt object: Represents the Assembly Constraints setting controller object.
AsmGeneralSettingAtt object: Represents the Assembly General setting controller object.
Assemble object: Represents the assemble boolean operation.
AssemblyAnnotationSets object
AssemblyBoolean object: Represents the AssemblyBoolean object.
AssemblyConvertor object: Product conversion object.
AssemblyFeature object: Represents the AssemblyFeature object.
AssemblyFeatures object: A collection of all the AssemblyFeature objects of a product.
AssemblyHole object: Represents the AssemblyHole object.
AssemblyPocket object: Represents the AssemblyPocket object.
AssemblySplit object: Represents the AssemblySplit object.
AssociatedRefFrame object: Interface dedicated to manage Datum Reference Frame associated to a TPS.
AsySimActivity object: Interface for a Delmia Simulation Activity.
AttachmentCont object: Interface representing xxx.
AutoDraft object: Represents the AutoDraft shape.
AutoFillet object: Represents the AutoFillet shape.
AutoWalkActivity object
AuxDevicesMgt object
Axis2D object: Interface defining a coordinate system in the 2D Space.
AxisSystem object: The object Axis System A axis system has got one origin point and three orthogonal axes, crossing at the origin point.
AxisSystems object: A collection of all the AxisSystem objects contained in the part.
AxisToAxis object: Represents the hybrid shape AxisToAxis feature object.

B

BasicComponent object: Interface designed to manage Analysis Basic Components.
BasicComponents object: The collection of Basic Components defining and analysis object.
BasicDevice object: Interface representing a Basic Device.
Behavior object: Represents a behavior.
BehaviorExtension object: Manages the behaviors of a technological object.
BehaviorSettingAtt object: Enables attribute access to BKT options.
BehaviorVBScript object: Represents the VBScript behavior.
Behaviors object: Represents the Behaviors collection currently managed by the application.
BiDimFeatEdge object: 1-D boundary belonging to a feature whose topological result is two dimensional.
Bodies object: A collection of all the Body objects contained in the part.
Body object: The object that manages a sequence of shapes, a set of sketches, a set of hybrid bodies, a set of ordered geometrical sets and a set of hybrid shapes.
BoolParam object: Represents the boolean parameter.
BooleanShape object: Represents the shapes based on boolean operations on other shapes.
Boundary object: Topological cell, such as a face, an edge or a vertex.

C

CATBaseDispatch object: Base class for Automation interfaces.
CATBaseUnknown object: Base class for creating interfaces and for implementing interfaces.
CD5Engine object: Represents the ENOVIA V6 Integration Engine, that is to say the entry point to the CATIA/ENOVIA V6 Integration.
CD5EngineV6R2014x object: Represents the ENOVIA V6 Integration Engine, that is to say the entry point to the CATIA/ENOVIA V6 Integration.
CD5EngineV6R2015 object: Represents the ENOVIA V6 Integration Engine, that is to say the entry point to the CATIA/ENOVIA V6 Integration.
CD5ID object: Represents the ENOVIA V6 Integration identifier.
CD5IDs object: Represents a list of ENOVIA V6 Integration identifier(CD5ID).
CD5Properties object: Represents a collection of all the properties of an ENOVIA V6 object.
CD5Property object: Represents a single property of an ENOVIA V6 object.
CD5SaveItem object: Represents a save object which user is trying to save.
CD5SaveItems object: Represents a Collection of items which user is trying to save.
CD5SaveOperation object: Represents a Save Operation Object.
CD5Structure object: Represents the structure of an ENOVIA V6 object.
CD5Template object: Represents a Template.
CD5TemplateType object: Represents a Template Type.
CD5TemplateTypes object: Represents a List of all Template types.
CD5Templates object: Represents a List of all Templates from a Template type.
CDMASettingAtt object: Represents the base object to handle the parameters of the cache.
CGRAdhesionSettingAtt object: Represents the base object to handle the parameters of the cache.
CacheSettingAtt object: Represents the base object to handle the parameters of the cache.
CalibOffsets object: Interface to set Robot base/Tool offsets based on Calibration.
CallRobotTaskActivity object: Interface representing a CallRobotTaskActivity.
Camera object: Represents the camera.
Camera2D object: Represents a 2D camera.
Camera3D object: Represents a 3D camera.
Cameras object: A collection of all the Camera objects currently attached to a Document object.
Capture object
CaptureFactory object: Interface for the Capture Factory.
Captures object
CatalogDocument object: Represents the Document object for catalog.
CatalogSHMObjectSettingAtt object: Represents the CATIA Sheet Metal Aerospace General setting controller object.
Chamfer object: Represents the chamfer shape.
Check object: Represents the check relation.
CircPattern object: Represents the circular pattern.
Circle2D object: Class defining a circle in 2D Space.
Clash object: Represents the Clash object.
ClashResult object: Represents the ClashResult object.
ClashResults object: A collection of all ClashResult objects currently managed by the application.
Clashes object: A collection of all Clash objects currently managed by the application.
CloseSurface object: Represents the Close feature.
Collection object: Represents the base object for collections.
CollisionFreeWalk object
ColorESSObjectSettingAtt object: The interface to access a CATIAColorESSObjectSettingAtt.
ColorSTDObjectSettingAtt object: The interface to access a CATIAColorSTDObjectSettingAtt.
CommandStatisticsSettingAtt object: Interface for Command statistic Controler Role: the command statistics controler manages the values of all or only a part of the attributes available for the thematic.
CompositeTolerance object: Interface for accessing composite tolerance on a TPS.
CompositesMaterial object: Represents a Composites Material object.
CompositesServices object: Represents CATIACompositesServices that allow to query composites entity.
Conflict object: Represents the Conflict object.
Conflicts object: A collection of all Conflict objects currently detected by a Clash object.
ConstRadEdgeFillet object: Represents the edge fillet shape with a constant radius.
Constraint object: A geometric constraint set for geometric elements of a part, a sketch, or a product.
ConstraintSatisfaction object: Represents the set of equation.
Constraints object: A collection of all geometric constraints set on a part, a sketch, or a product.
ControlPoint2D object: Class defining a spline control point in 2D Space.
ControledRadius object: Interface for accessing Controled Radius modifier on a linear TPS (ASME norm only).
CoordDim object
Curve2D object: Class defining a curve in 2D Space.
CurveFastener object: Interface DELMIACurveFastener DELMIACurveFastener represent body in white fasteners of type curve.
CylindricalFace object: 2-D boundary with a cylindrical geometry.

D

D5Device object: Interface representing a D5 Device.
DLNameSettingAtt object: Interface to handle the DLNames.
DMOOffset object
DMOOffsets object
DMOThickness object
DMOThicknesses object
DMUDataFlow object: Allows the DMU Data Flow Management within the DMU Navigator environment.
DMUReview object: Represents a DMU Review.
DMUReviews object: A collection of all DMUReviews currently managed by the application.
DMUTolSettingAtt object: Represents the DMU Tolerancing setting controller object.
DNB3DState object: Interface representing the 3D State object.
DNB3DStateManagement object: Interface representing the 3D State Management in the CATDocument.
DNB3DStates object: Interface representing the collection of 3D State objects.
DNBAttachment object: Interface representing xxx.
DNBAttachmentFactory object: Interface representing xxx.
DNBFastenerItemServices object
DNBFastenerManagement object
DNBFastenerNewMfgPosServices object
DOFState object: Interface representing a Basic Device from which to get DOFState.
DatumSimple object: Interface for Simple Datum TPS (datum entity).
DatumTarget object: Interface for Datum Target TPS (datum entity).
DefaultAnnotation object: This interface is used to get information about default annotation.
Defeaturing object: Represents the defeaturing.
DefeaturingFilletFilter object: Represents the defeaturing fillet filter.
DefeaturingFilter object: Represents the base object for defeaturing filters.
DefeaturingFilterWithRange object
DefeaturingFilters object: Represents the filter collection of a defeaturing object.
DefeaturingHoleFilter object: Represents the defeaturing hole filter.
DelayAct object: Interface representing a DelayAct.
DesignTable object: Represents the DesignTable object.
DevAnalysisSettingAtt object: Interface to handle parameters of Infrastructure-DELMIA Infrastructure-Device Analysis Tools Options Tab page.
DeviceJointRelations object
DeviceSim object: Interface allowing simulation of a Device.
DeviceTask object: Represents the Device Task.
DeviceTaskFactory object: Represents the Task Creation Factory for Devices.
Dimension object: Represents the dimension parameter.
Dimension3D object: Interface Managing Semantic Dimension.
DimensionLimit object: Represents the limit object of tolerance dimensions.
DimensionPattern object: Interface to dimension pattern.
DisconnectionSettingAtt object: Represents the base object to handle the parameters of automatic disconnection.
Distance object: Represents the Distance object.
Distances object: A collection of all Distance objects currently managed by the application.
Document object: Represents the document.
DocumentationSettingAtt object: Setting controller for the Help property tab page.
Documents object: A collection of all the Document objects currently managed by the application.
Draft object: Represents the draft shape.
DraftDomain object: Represents the draft domain.
DraftDomains object: The collection of draft domains used by the draft shape.
DraftingPageSetup object: Represents the page setup for the drawing documents.
DraftingSettingAtt object: Manages drafting settings.
DrawingArrow object: Represents a drawing arrow in a drawing view.
DrawingArrows object: A collection of all the drawing arrows currently managed by a drawing view of drawing sheet in a drawing document.
DrawingComponent object: Represents a drawing component instance (ditto) in a drawing view.
DrawingComponents object: A collection of all the drawing components (ditto) currently managed by a drawing view of drawing sheet in a drawing document.
DrawingCoordDim object: Represents a drawing Coordinate Dimension in a drawing view.
DrawingCoordDims object: A collection of all the drawing Coordinate Dimension currently managed by a drawing view of drawing sheet in a drawing document.
DrawingDimExtLine object: Manages extension lines of a dimension in drawing view.
DrawingDimLine object: Manages dimension line of a dimension in drawing view.
DrawingDimValue object: Manages dimension value of a dimension in drawing view.
DrawingDimension object: Represents a drawing dimension in a Drawing view.
DrawingDimensions object: A collection of all the drawing dimensions currently managed by a drawing view of drawing sheet in a drawing document.
DrawingDocument object: Represents the Document object for drawings.
DrawingGDT object: Represents a drawing GDT in a drawing view.
DrawingGDTs object: A collection of all the drawing GDTs currently managed by a drawing view of drawing sheet in a drawing document.
DrawingLeader object: Represents a drawing leader in a drawing view.
DrawingLeaders object: A collection of all the drawing leaders currently managed by a drawing view of drawing sheet in a drawing document.
DrawingPageSetup object: Represents the page setup for the drawing documents.
DrawingPicture object: Represents a drawing picture in a drawing view.
DrawingPictures object: A collection of all the drawing pictures currently managed by a drawing view of drawing sheet in a drawing document.
DrawingRoot object: Represents the drawing object in drawing documents.
DrawingSheet object: Represents a drawing sheet of the drawing document.
DrawingSheets object: A collection of all the drawing sheets currently managed by the drawing document.
DrawingTable object: Represents a drawing table in a drawing view.
DrawingTables object: A collection of all the drawing tables currently managed by a drawing view of drawing sheet in a drawing document.
DrawingText object: Represents a drawing text in a drawing view.
DrawingTextProperties object: Represents the properties of a drawing text in a drawing view.
DrawingTextRange object: Represents a drawing text range, or contiguous area, in a drawing text.
DrawingTexts object: A collection of all the drawing texts currently managed by a drawing view of drawing sheet in a drawing document.
DrawingThread object: Represents a drawing thread in a drawing view.
DrawingThreads object: A collection of all the drawing threads currently managed by a drawing view of drawing sheet in a drawing document.
DrawingView object: Represents a drawing view in a drawing sheet.
DrawingViewGenerativeBehavior object: Represents the generative behavior of a drawing view.
DrawingViewGenerativeLinks object: Represents the generative links of a drawing view.
DrawingViews object: A collection of all the drawing views currently managed by a drawing sheet in a drawing document.
DrawingWelding object: Represents a drawing welding in a drawing view.
DrawingWeldings object: A collection of all the drawing weldings currently managed by a drawing view of drawing sheet in a drawing document.
DressUpShape object: Represents the shapes built with other shape sub-elements such as faces or edges.
Dressup object: Interface to access the Dressup object.
Dressups object: A collection of all Dressup entities currently managed by the application.
DxfSettingAtt object: Interface dedicated to modify or read the current settings corresponding to the DXF Data Exchange (used for DXF or DWG files) Ensure consistency with the C++ interface to which the work is delegated.
DynLicenseSettingAtt object: Interface to handle the dynamic licensing settings.

E

E5Property object: Interface to access object properties.
EHMInsertionActPlugMapViewData object: Interface to access Plug Map view data associated to an Insertion activity.
EHSUpdateSmoothnessFactor object: Interface representing xxx.
EKPServices object: Interface to assign and remove Engineering Requirements to and from an activity.
Edge object: 1-D boundary.
EdgeFillet object: Represents the edges-based fillet shape.
ElecSchWire object: For technical electrical wire attributes.
ElecSchematicObject object: Represents the electrical schematic objects.
Ellipse2D object: Class defining an ellipse in 2D Space.
EndCutESSObjectSettingAtt object: The interface to access a CATIAEndCutESSObjectSettingAtt.
EnumParam object: Represents the enum parameter.
EnvelopCondition object: Interface for accessing Envelop Condition modifier on a TPS.
ErrorlogStatisticsSettingAtt object: Interface for Errorlog statistic Controler.
ExpertCheck object: Represents the edition part of a check.
ExpertCheckRuntime object: Runtime part of a check.
ExpertReportObject object: Represents the ExpertReportObject object.
ExpertReportObjects object: Represents the collection of (succeeded or failed) report objects.
ExpertRule object: Represents the edition part of a rule.
ExpertRuleBase object: Represents the RuleBase object that can be edited.
ExpertRuleBaseComponentRuntime object: Represents a rule base component in a ruleset.
ExpertRuleBaseComponentRuntimes object: Represents the collection of ExpertRuleBase (ExpertChecks, ExpertRules, and ExpertRuleSets) components.
ExpertRuleBaseRuntime object: Represents the Runtime part of the RuleBase.
ExpertRuleRuntime object: Represents the ExpertRuleRuntime object.
ExpertRuleSet object: Represents the ExpertRuleSet object which is the editable part of a RuleSet or a RuleBase.
ExpertRuleSetRuntime object: Represents the ExpertRuleSet object in the RelationSet.
Export3DXmlSettingAtt object: Represents a setting controller for the 3D XML export settings.

F

FASReportingSettingAtt object: The interface to access a DNBIAFASReportingSettingAtt.
FTAInfraSettingAtt object: Represents the FT&A (Functional Tolerancing & Annotation) infrastructure setting controller object.
FTASettingAtt object: The interface to access a CATIAFTASettingAtt.
Face object: 2-D boundary.
FaceFillet object: Represents the face fillet shape.
Factory object: Abstract object gathering behaviours of all objects being a factory.
Factory2D object: Interface to the factory for 2D objects.
Fastener object
FastenerGroup object
FastenerSet object: Interface DELMIAFasteners DELMIAFasteners represent collection of fasteners of both types point and curve.
FastenerWorkBench object: Interface DELMIAFastenerWorkBench It is a utility class to get fasteners and groups from document.
FeatureGenerator object: The interface to access a CATIAFeatureGenerator.
File object: Represents the file object.
FileAccessStatisticsSettingAtt object: Interface for FileAccess statistic Controler Role: the FileAccess statistics controler manages the values of all or only a part of the attributes available for the thematic.
FileComponent object: Represents the file object.
FileSystem object: Represents the file system object.
Files object: A collection of all the file objects in a folder.
Fillet object: Represents the fillet shape.
FittingSettingAtt object: Interface to handle parameters of DMU Fitting Tools Options Tab page Role: This interface is implemented by a component which represents the controller of DMU Fitting Tools Options parameter settings.
FixTogether object: The object that manages a sequence of products or fixTogethers.
FixTogethers object: A collection of all the FixTogether objects contained in the product.
FlagNote object: Interface for the TPS Flag Note object.
Folder object: Represents the folder object.
Folders object: The folders object belongs to a folder.
Formula object: Represents the formula relation.
FreeParameter object: Interface to access a CATIAFreeParameter.
FreeParameters object: Interface to access a CATIAFreeParameters.
FreeSpace object
FreeSpaces object: Interface to compute Free Spaces.
FreeState object: Interface for accessing Free State modifier on a TPS.
FunctActionsGroup object: The interface to access a group of functional actions in a system.
FunctActionsGroups object: The interface to access the groups of functional actions in a system.
FunctAssociation object: The interface to access a Functional Association.
FunctAssociations object: The interface to access a set of Functional Associations.
FunctFacetManagers object: Represents the Functional Facet's Managers.
FunctGenScriptMgr object: The interface to access a Functional GenerativeScripts manager.
FunctMultiRepMgr object: The interface to access a Functional Multi-Rep manager.
FunctNodeGraphLayout object: Represents a CATIAFunctNodeGraphLayout.
FunctScript object: The interface to access a Functional Script.
FunctScripts object: The interface to access a set of Functional Scripts.
FunctionalAction object: The interface to access a Functional Action.
FunctionalActions object: The interface to access a collection of FunctionalActions.
FunctionalDescription object: The interface to access a Functional Description.
FunctionalDocument object: Represents a Functional Document.
FunctionalElement object: Represents a Functional Element.
FunctionalFacet object: The interface to access a Functional Facet.
FunctionalFacetMgr object: The interface to access a Functional Facet Manager.
FunctionalObject object: The interface to access a Functional Object.
FunctionalObjectProxy object: The interface to access a Functional ObjectProxy.
FunctionalObjects object: Interface to access a collection of FunctionalObjects.
FunctionalPosition object: Represents a Functional Position.
FunctionalSystemSettingAtt object: Enables attribute access to PFD options.
FunctionalVariant object: The interface to access a Functional Variant.
FunctionalVariants object: The interface to access a collection of FunctionalVariants.

G

GeneralSessionSettingAtt object: Setting controller for the General property tab page.
GeneralStatisticsSettingAtt object: Interface for General statistic Controler.
GenericAccuracyProfile object: Interface to manage Generic Accuracy Profile of Robot controller.
GenericAction object: Interface representing a GenericAction.
GenericActionFactory object: Interface representing GenericAction factory.
GenericMotionProfile object: Interface to manage Generic Motion Profile of Robot controller.
GenericObjFrameProfile object: Interface to manage Generic Object frame Profile of Robot controller.
GenericToolProfile object: Interface to manage Generic Tool Profile of Robot controller.
GeometricElement object: 2D or 3D wireframe geometric element.
GeometricElements object: A collection of all geometric elements contained in a part or a sketch.
Geometry2D object: 2D wireframe geometric element.
GlobalStatisticsSettingAtt object: Interface for Global statistic Controler Role: the global statistics controler manages the values of all or only a part of the attributes available for all the statistics thematics.
GrabAct object: Interface representing a Grab activity.
Groove object: Represents the groove shape.
Group object: Represents a DMU group.
Groups object: A collection of all groups currently managed by the application.

H

Hole object: Hole Feature in Part Design.
HomePosition object: Interface representing a device's Home Position.
HtsCCPSettingAtt object
HtsGeneralSettingAtt object
HtsJointSpeedSettingsAtt object: Interface representing xxx.
HtsTaskDisplaySettingAtt object
HumanActivityGroup object: Interface representing xxx.
HumanActivityGroupFactory object: The object that represents the Human Activity Group Factory.
HumanActsFactory object: The object that represents the Human Activity Factory.
HumanCallTask object: Interface representing xxx.
HumanProgram object: The object that represents program-node of Worker.
HumanTask object
HumanTaskList object
HybridBodies object: A collection of the HybridBody objects.
HybridBody object: The object is a hybrid body.
HybridShape object: Represents the hybrid shape object.
HybridShape3DCurveOffset object: Represents the hybrid shape 3DCurve Offset operation feature.
HybridShapeAffinity object: Represents the hybrid shape affinity feature object.
HybridShapeAssemble object: Represents the hybrid shape assemble feature object.
HybridShapeAxisLine object: Represents the hybrid shape axis line feature object.
HybridShapeAxisToAxis object: Represents the hybrid shape axis to axis tranformation feature object.
HybridShapeBlend object: Represents the hybrid shape blended surface object.
HybridShapeBoundary object: Represents the hybrid shape boundary feature object.
HybridShapeBump object: The Bump feature : an Bump is made up of a body to process and some Bump parameters.
HybridShapeCircle object: Represents the hybrid shape circle object.
HybridShapeCircle2PointsRad object: Represents the hybrid shape circle object defined using two points and a radius.
HybridShapeCircle3Points object: Represents the hybrid shape circle object defined using three points.
HybridShapeCircleBitangentPoint object: Represents the hybrid shape circle object defined using a point and tangent to two curves.
HybridShapeCircleBitangentRadius object: Represents the hybrid shape circle object defined using a radius and tangent to two curves.
HybridShapeCircleCenterAxis object: Represents the hybrid shape circle object defined using a point and axis/line.
HybridShapeCircleCenterTangent object: Represents the hybrid shape circle object defined using a center, a curve and a support.
HybridShapeCircleCtrPt object: Represents the hybrid shape circle object defined using a center and a point on the circle.
HybridShapeCircleCtrRad object: Represents the hybrid shape circle object defined using a center and a radius.
HybridShapeCircleExplicit object: Represents the hybrid shape circle object explicitely defined.
HybridShapeCircleTritangent object: Represents the hybrid shape circle object tangent to three curves.
HybridShapeCombine object: Represents the hybrid shape combined curve object.
HybridShapeConic object: Represents the hybrid shape conic object.
HybridShapeConnect object: Represents the hybrid shape connect curve object.
HybridShapeCorner object: Represents the hybrid shape corner feature.
HybridShapeCurveExplicit object: Represents the hybrid shape Curve explicit feature object.
HybridShapeCurvePar object: Represents the hybrid shape curve parameter object.
HybridShapeCurveSmooth object: Represents the hybrid shape curve smoothing operation feature.
HybridShapeCylinder object: Represents the hybrid shape Cylinder feature object.
HybridShapeDevelop object: Represents the hybrid shape develop feature object.
HybridShapeDirection object: Represents the hybrid shape direction feature object.
HybridShapeExtract object: Represents the hybrid shape extract feature object.
HybridShapeExtractMulti object: Represents the hybrid shape ExtractMulti feature object.
HybridShapeExtrapol object: Represents the hybrid shape extrapolation feature object.
HybridShapeExtremum object: Represents the hybrid shape extremum feature object.
HybridShapeExtremumPolar object: Represents the hybrid shape extremum polar feature.
HybridShapeExtrude object: The Extrude feature : an Extrude is made up of a face to process and one Extrude parameter.
HybridShapeFactory object: Interface to create all kinds of HybridShape objects that may be needed in wireframe and surface design.
HybridShapeFill object: The Fill feature : an Fill is made up of a face to process and one Fill parameter.
HybridShapeFilletBiTangent object: Fillet Bi-Tangent feature.
HybridShapeFilletTriTangent object: Fillet Tri-Tangent feature.
HybridShapeHealing object: Represents the hybrid shape healing feature object.
HybridShapeHelix object: Represents the hybrid shape helix feature object.
HybridShapeInstance object: The interface to access a CATIAHybridShapeInstance.
HybridShapeIntegratedLaw object: Represents the hybrid shape "integrated" law feature object.
HybridShapeIntersection object: Represents the hybrid shape intersection feature object.
HybridShapeInverse object: The Inverse feature : an Inverse is made up of a face to process and one Inverse parameter.
HybridShapeLawDistProj object: Interface to law feature.
HybridShapeLineAngle object: Line defined from a reference curve, a plane or a surface, a point and an angle.
HybridShapeLineBiTangent object: Line tangent to a curve.
HybridShapeLineBisecting object: Represents the hybrid shape bisecting line feature object.
HybridShapeLineExplicit object: Represents the hybrid shape line explicit feature object.
HybridShapeLineNormal object: Line defined by a point and a direction normal to a surface.
HybridShapeLinePtDir object: Line defined by a point and a direction.
HybridShapeLinePtPt object: Represents the hybrid shape line between two points feature object.
HybridShapeLineTangency object: Line tangent to a curve.
HybridShapeLoft object: Represents the hybrid shape loft surface feature object.
HybridShapeMidSurface object: Represents the hybrid shape MidSurface feature object.
HybridShapeNear object: The Near feature : an Near is made up of a face to process and one Near parameter.
HybridShapeOffset object: Represents the hybrid shape offset feature object.
HybridShapePlane1Curve object: plane through a curve.
HybridShapePlane1Line1Pt object: Represents plane feature defined by a line and a point.
HybridShapePlane2Lines object: plane defined by two lines.
HybridShapePlane3Points object: Represents the hybrid shape plane through three points feature object.
HybridShapePlaneAngle object: Represents the hybrid shape plane angle feature object.
HybridShapePlaneEquation object: Plane define by an equation plane.
HybridShapePlaneExplicit object: Represents the hybrid shape Plane explicit feature object.
HybridShapePlaneMean object: Represents the hybrid shape mean plane feature object.
HybridShapePlaneNormal object: Normal plane.
HybridShapePlaneOffset object: Offset plane.
HybridShapePlaneOffsetPt object: Offset plane with point reference.
HybridShapePlaneTangent object: Tangency plane.
HybridShapePointBetween object: Represents the hybrid shape PointBetween feature object.
HybridShapePointCenter object: Represents the hybrid shape PointCenter feature object.
HybridShapePointCoord object: Point defined by coordinates.
HybridShapePointExplicit object: Represents the hybrid shape point explicit feature object.
HybridShapePointOnCurve object: Represents the hybrid shape point on a curve.
HybridShapePointOnPlane object: Point on a plane.
HybridShapePointOnSurface object: Represents the Point on Surface feature objects.
HybridShapePointTangent object: Point Tangent.
HybridShapePolyline object: Represents the hybrid shape polyline curve object.
HybridShapePositionTransfo object: Represents the hybrid shape position transformation feature object.
HybridShapeProject object: Represents the hybrid shape project feature object.
HybridShapeReflectLine object: Represents the hybrid shape reflect line feature object.
HybridShapeRevol object: The Revol feature : an Revol is made up of a face to process and one Revol parameter.
HybridShapeRollingOffset object
HybridShapeRotate object: Represents the hybrid shape rotate feature object.
HybridShapeScaling object: Represents the hybrid shape scaling feature object.
HybridShapeSection object: Interface to hybrid shape section feature.
HybridShapeSphere object: Represents the hybrid shape sphere feature object.
HybridShapeSpine object: Represents the hybrid spine curve feature object.
HybridShapeSpiral object: Represents the hybrid shape Spiral feature object.
HybridShapeSpline object: Represents the hybrid shape spline feature object.
HybridShapeSplit object: Represents the hybrid shape split feature object.
HybridShapeSurfaceExplicit object: Represents the hybrid shape Surface explicit feature object.
HybridShapeSweep object: Represents the hybrid shape Sweep feature object.
HybridShapeSweepCircle object: Represents the hybrid shape sweep circle feature object.
HybridShapeSweepConic object: Represents the hybrid shape conic sweep feature.
HybridShapeSweepExplicit object: Represents the hybrid shape Sweep explicit feature object.
HybridShapeSweepLine object: Represents the sweep line object.
HybridShapeSymmetry object: Represents the hybrid shape symmetry feature object.
HybridShapeThickness object: Represents the hybrid shape Thickness feature object.
HybridShapeTransfer object: Represents the hybrid shape Transfer feature object.
HybridShapeTranslate object: Represents the hybrid shape translate feature object.
HybridShapeTrim object: Represents the hybrid shape trim object.
HybridShapeUnfold object: Represents the hybrid shape Unfold feature object.
HybridShapeVolumeExplicit object: Represents the hybrid shape Volume explicit feature object.
HybridShapeWrapCurve object: Represents the hybrid shape wrap curve surface object.
HybridShapeWrapSurface object: Represents the hybrid shape wrap surface object.
HybridShapes object: The collection of the HybridShapes making up a body.
Hyperbola2D object: Class defining an hyperbola in 2D Space.
Hyperlink object: Represents a hyperlink marker.
Hyperlinks object

I

IDispatch object: Base interface for all Automation interfaces.
IPDTemplateProperty object: Interface to access template object (being pointed by the given V5 object) properties.
IUnknown object: Base interface for all interfaces.
Ig2SettingAtt object: Interface dedicated to modify or read the current settings corresponding to the IG2 Data Exchange Ensure consistency with the C++ interface to which the work is delegated.
IgesSettingAtt object: Represents the CATIA IGES setting controller object.
IgpOlpSettingAtt object: Represents the Offline Programming setting controller object.
ImportD5SettingAtt object: Interface to handle parameters of General-Compatibility-DELMIA D5 Tools Options Tab page.
Inertia object: Represents the Inertia object.
Inertias object: A collection of all inertia objects currently managed by the application.
InstanceFactory object: Represents the CATIAInstanceFactory.
IntParam object: Represents the integer parameter.
InteropSettingAtt object: Represents the object to handle the setting parameters of the "V4 Data Reading" tab page.
Intersect object: Represents the intersect boolean operation.
Item object: The object that represents an item.
Items object: The collection of items related to the current activity.

J

Joint object: Interface to manage the Joint object.
Joints object: A collection of all Joint entities currently managed by the application.

K

KWECorrectFunction object: Represents the Knowledge correct function.
KinematicsWorkbench object: Interface to access all Kinematics entities.
KnowledgeActivateObject object: Interface to access a CATIAKnowledgeActivableObject.
KnowledgeObject object: Interface to access a CATIAKnowledgeObject.
KnowledgeSheetSettingAtt object: The interface to access a CATIAKnowledgeSheetSettingAtt.

L

LanguageSheetSettingAtt object: The interface to access a CATIALanguageSheetSettingAtt.
Law object: Represents the Law object.
Layout2DFactory object
Layout2DRoot object: Interface to manage the 2D Layout root.
Layout2DSettingAtt object: The interface to access a CATIA2DLSettingAtt.
Layout2DSheet object: The interface to access a Layout2D Sheet.
Layout2DSheets object: A collection of all the Layout sheets 2DL currently managed by the LayoutRoot.
Layout2DView object: The interface to access a Layout2D View.
Layout2DViews object
Length object: Represents the length parameter.
LibTabSettingAtt object
LicenseSettingAtt object: Interface to handle the licensing settings.
LightSource object: Represents the light source.
LightSources object: A collection of all the LightSource objects.
Limit object: Represents the limit of a prism or a hole shape.
Line object: Represents the hybrid shape Line feature object.
Line2D object: Class defining a line in 2D Space.
LinearRepartition object: Represents the linear repartition.
List object: Represents a CATIAList.
ListParameter object: Represents a CATIAListParameter.
Loft object: Loft feature.
Loop object: The interface to access a CATIALoop.

M

MHILoadParameters object: Interface representing a means to set information that is needed for the load and also to retrieve this information on the loaded document.
MHIOpenAccess object: Interface representing a means to load data from the Hub into V5.
MHIRelationManagement object: Interface to access all supported relation types and a relation object's atrribute provider to access it's attributes Role: This interface, given a V5 process, product(or resource) object and the relation type will get the handle to the relation object's attribute provider.
MHISaveAccess object: Interface representing a means to (1) Save data to the Hub (2) Retrieve certain information on the loaded document DNBIAMHISaveAccess is implemented on Document.
MachiningProcess object: MachiningProcess defines a set of properties and methods to apply a Machining Process to a geometrical feature (design or manufacturing).
MacrosSettingAtt object: Setting controller for the Macros tab page.
ManipSettingAtt object: Interface to handle parameters of DMU Manip Tools Options Tab page Role: This interface is implemented by a component which represents the controller of DMU Manip Tools Options parameter settings.
ManufacturingAPTGenerator object: Generator of APT output machining code.
ManufacturingActivity object: ManufacturingActivity defines a set of methods and mainly adds some specific methods and services in Manufacturing on ProcessPlan Activities.
ManufacturingActivitySyntax object: This interface offers services to manage PP words of activity.
ManufacturingActivitySyntax2 object: This interface offers services to manage PP words of activity.
ManufacturingActivityToolPath object: Interface to compute the tool path of an activity.
ManufacturingComputePMAParameters object
ManufacturingCopyTransformation object: Interface representing the Manufacturing Copy Transformation object.
ManufacturingFactories object: Interface to manage manufacturing factories.
ManufacturingFeature object: ManufacturingFeature defines a set of methods to access a Manufacturing Feature.
ManufacturingFeatureFactory object: Interface dedicated to machining features creation.
ManufacturingFeatures object: Collection of Manufacturing Features.
ManufacturingGeneratorData object: Represents the manufacturing output stream object.
ManufacturingHole object: Hole Feature in Machining domain.
ManufacturingInsert object: The interface to access a CATIAManufacturingInsert.
ManufacturingMachinableArea object: Machinable Area in Manufacturing.
ManufacturingMachinableAreaMngt object: Interface dedicated to machinable area feature managment.
ManufacturingMachinableFeature object: Machinable Feature in Manufacturing.
ManufacturingMachinableGeometry object: Represents the machinable geometry object.
ManufacturingMachine object: Machine in machining domain.
ManufacturingMachiningAxis object: ManufacturingMachiningAxis defines a set of methods to manage a Machining Axis System or an Origin.
ManufacturingOperation object: ManufacturingOperation defines a set of methods.
ManufacturingOutput object: Object that represents the output machining code.
ManufacturingOutputGenerator object: Father object to generate output machining code.
ManufacturingParameter object
ManufacturingPattern object: The Manufacturing Pattern is a specialized feature used to machine the same item several times at several positions.
ManufacturingPrecedence object: Defines a precedence relation between objects.
ManufacturingPrecedences object: Interface that manage the precedences for an object of type @ CATIAManufacturingActivity.
ManufacturingPrismaticMachiningArea object: ManufacturingPrismaticMachiningArea defines a set of properties and methods.
ManufacturingProcess object: A ManufacturingProcess for a Manufacturing Document.
ManufacturingProgram object: A ManufacturingProgram for a Manufacturing Document.
ManufacturingProgram2 object: A ManufacturingProgram for a Manufacturing Document.
ManufacturingResourceFactory object: Interface to create manufacturing resources.
ManufacturingSetup object: A ManufacturingSetup for a Manufacturing Document.
ManufacturingSetup2 object: A ManufacturingSetup 2 for a Manufacturing Document.
ManufacturingSetup3 object: A ManufacturingSetup 3 for a Manufacturing Document.
ManufacturingSurfaceGeomArea object: Represents the Manufacturing Surface NCGeometry.
ManufacturingSurfaceMachiningArea object: Represents the Manufacturing Surface Machining Area.
ManufacturingTool object: A ManufacturingTool for a Manufacturing Document.
ManufacturingToolAssembly object: Represents the tool assembly.
ManufacturingToolAssembly2 object: Represents the tool assembly.
ManufacturingToolCorrector object: Manufacturing tool corrector.
ManufacturingToolMotion object: A ManufacturingToolMotion for a Manufacturing Document.
ManufacturingUserRepresentation object: Interface dedicated to objects representation management.
ManufacturingView object: The Manufacturing View is the object that holds all the manufacturing features of the model.
Marker2D object: Represents a marker 2D in a specified annotated view.
Marker2Ds object: A collection of Marker2Ds objects.
Marker3D object: Represents a marker 3D.
Marker3Ds object: A collection of Marker3D objects.
MarkerSettingAtt object: Interface to handle the Marker settings The different settings are: MarkerAutoUpdate Update on product structure modifications and scenes activation.
Material object: Represents a Material object.
MaterialCondition object: Interface for accessing Material Condition modifier on a TPS.
MaterialDocument object: Represents the Document object for materials.
MaterialESSObjectSettingAtt object: The interface to access a CATIAMaterialESSObjectSettingAtt.
MaterialFamilies object: A collection of all the MaterialFamily objects.
MaterialFamily object: Represents a Material Family object.
MaterialManager object: Interface to manage material manager object.
Materials object: A collection of all the Material objects.
Measurable object: The interface to access a CATIAMeasurable Get measurements on the object.
MeasureSettingAtt object: The interface to access a CATIAMeasureSettingAtt.
Mechanism object: Interface to access the Mechanism object.
MechanismCommand object: Interface to access the Command object (in Kinematics context).
MechanismCommands object: A collection of all MechanismCommand entities currently managed by the application.
Mechanisms object: A collection of all Mechanism entities currently managed by the application.
MedianFeature object: Interface for accessing Median Feature modifier on a Semantic GDT (ISO Standard only).
MemoryWarningSettingAtt object: Represents the base object to handle the parameters of memory warning mechanism.
Merges object
MfgActivities object: The collection of MfgActivities related to the Manufacturing Document .
MfgAssembly object: This Interface represents a Manufacturing Assembly.
MfgAssemblyFactory object: Represents the factory to creates a manufacturing assembly.
MfgHubSettingAtt object: Represents the Manufacturing Hub setting controller object.
MfgToolMotions object: The collection of MfgToolMotions related to the Manufacturing Document .
MigrBatchSettingAtt object: Represents the object to handle the setting parameters of the "Migration Batch" tab page.
Mirror object: Represents the mirror shape.
MonoDimFeatEdge object: 1-D boundary belonging to a feature whose topological result is one dimensional.
MountActivity object: Interface representing a Mount Activity.
MountManager object: Represents the Mount Manger of a Robot.
Move object: Represents an object associated with any kind of objects which retrieves the corresponding movable object.
MoveActionActivity object: Interface representing a Move Activity inside a generic Action (Close Gun/Open Gun etc).
MoveHomeAct object: Interface representing a MoveHomeAct.
MoveJointsAct object: Interface representing a MoveJointsAct.
MoveToPostureActivity object: The object that represents an MoveToPosture(MTP) Activity.
MultiCADSettingAtt object

N

N4DNavigatorSettingAtt object: Interface to handle the settings of the DMU Navigator workbench.
NavigatorWorkbench object: The object to manage all DMU Navigator entities.
Noa object: Interface for the TPS Noa object.
NonSemanticDatum object: Interface Managing Non Semantic Datum.
NonSemanticDatumTarget object: Interface Managing Non Semantic Datum Target.
NonSemanticDimension object: Interface Managing Non Semantic Dimension.
NonSemanticGDT object
NotWireBoundaryMonoDimFeatVertex object: 0-D boundary belonging to a feature whose topological result is one dimensional, the boundary not beeing the extremity of the feature.
NumericalDisplayFormat object: Interface to manage numerical format properties of GST, DRF and Datum Target.

O

OLPTranslator object: Represents the Offline Programming Translator object.
Operation object: Represents an Operation.
OperationProfile object: Represents an Operation.
Optimization object: Represents an Optimization object.
OptimizationConstraint object: Represents an optimization constraint.
OptimizationConstraints object: Represents a collection of Optimization Constraint.
Optimizations object: Represents a collection of optimization features.
OptimizerWorkBench object
OrderGenerator object: Interface representing Create Shop Order APIs which generates Shop Order Instance(SOI), against user-given option(s).
OrderedGeometricalSet object: The object is an ordered geometrical set.
OrderedGeometricalSets object: A collection of the OrderedGeometricalSet objects.
OriginElements object: Represents the part's 3D reference axis system.
Outputs object: The collection of outputs related to the current activity.

P

PCBArea object
PCBBoard object
PCBComponent object
PCBHoleAndPattern object
PCBObject object
PCBWorkbench object: Interface to access Circuit Board Design workbench object.
PCSStatisticsSettingAtt object: Interface for PCS statistic Controler Role: the PCS statistics controler manages the values of all or only a part of the attributes available for the thematic.
PPGExecLogSettingAtt object: The interface to access a CATIAPPGExecLogSettingAtt.
PPRActivity object: The interface is used to retrieve the items and resources of the current Activity.
PPRDocument object: This interface is used to access Processes, Products and Resources.
PPRProducts object: This interface is used to retrieve and add Products from and to the list of Products.
Pad object: Represents the pad shape.
PageSetup object: Represents the page setup.
Parabola2D object: Class defining an parabola in 2D Space.
Parameter object: Represents the parameter.
ParameterProfiles object: Interface to manage an user-defined applicative parameter profile.
ParameterProfilesFactory object: Interface to manage an user-defined applicative parameter profile(s) defined on a robot controller.
ParameterSet object: Represents parameter set.
ParameterSets object: Represents a collection of parameter sets.
Parameters object: Represents the Parameters collection of the part or the product.
Part object: The root level object inside a PartDocument object.
PartComp object
PartComps object
PartDocument object: Represents the Document object for parts.
PartInfrastructureSettingAtt object: Setting controller for all the Part Infrastructure property tab pages.
PartServices object: The object exposes services for the part.
ParticularTolElem object: Interface for accessing particular geometry of the toleranced element.
PathESSRessourcesSettingAtt object: The interface to access a CATIAPathESSRessourcesSettingAtt.
Pattern object: Represents the pattern shape.
PertNode object: This Interface represents a PertNode in the PERT Chart.
PickActivity object: The object that represents an PickActivity.
PlaceActivity object: The object that represents an PlaceActivity.
PlanarFace object: 2-D boundary with a planar geometry.
Plane object: Represents the hybrid shape Plane feature object.
PlugMapViewSettingAtt object: Interface representing xxx.
Pocket object: Represents the pocket shape.
Point object: Represents the hybrid shape Point feature object.
Point2D object: Class defining a point in 2D Space.
PointFastener object: Interface DELMIAPointFastener DELMIAPointFastener represent body in white fasteners of type point.
Position object: Represents the position object.
PositionedMaterial object: Represents a Positioned Material object.
PrintArea object: Manages print area of drawing sheet.
Printer object: Represents a printer handled by the printing subsystem.
Printers object: A collection of all the Printer objects managed by the application.
PrintersSettingAtt object: Represents a setting controller for the printer settings.
Prism object: Prism-based features in Part Design : base for pad or pocket.
ProcessDocument object: This interface is used to access the PPRDocument and to add a new library.
Product object: Represents the product.
ProductDocument object: Represents the Document object for product structures.
ProductScene object: Represent the Product-Scene.
ProductScenes object: A collection of ProductScenes contained in a given ProductDocument.
Products object: The collection of the Product objects contained in a given Product object of a ProductDocument object.
ProjectedToleranceZone object: Interface for accessing projected tolerance zone informations of a TPS.
PspAppFactory object: Represents the application factory.
PspApplication object: Represents an application.
PspAttribute object: Represents Attribute Interface to query Plant Ship objects' attributes.
PspAttributeReport object: Represents the Attribute Report.
PspBuildPart object: Represents Interface to create and modify a part.
PspClass object: Represent Interface to list the start up object classes of an application.
PspCntrFlow object: Represents Interface to manage Connector Flow property.
PspConnectable object: Represents an Interface to manage object behaviors in making connections.
PspConnector object: Represents connector object.
PspFunctional object: Represents Plant Ship functional object.
PspGroup object: Represent the Group.
PspGroupable object: Represent the Groupable object that can be grouped by Group object.
PspID object: Represents the interface to generate and set IDs for the Distributive System Objects.
PspLightBend object: Represents the Light bendable object.
PspLightConnector object: Represents the light connector.
PspLightPart object: Represents the light part.
PspListOfBSTRs object: Represents a collection of CATBSTR type of strings.
PspListOfDoubles object: Represents a collection of double values.
PspListOfLongs object: Represents a collection of Long values.
PspListOfObjects object: Represents a collection of Objects.
PspLogicalLine object: Represents the logical line.
PspObject object: Represents PspObject.
PspPartConnector object: Represent the Part Connector to manage the technological data on connectors.
PspPhsyicalProduct object: Represents the interface to manage the technological connectors on physical objects.
PspPhysical object: Represents the object to access Plant Ship physical object information.
PspPlacePart object: Represents the Place physical parts object.
PspResource object: Represents the PspResource.
PspSpatial object: Represents the Psp Spatial object.
PspStretchableData object: Represents the PspStretchableData object.
PspTempListFactory object: Create temporary (non-persistent) lists to be used in VB environment.
PspWorkbench object: Represents the PspWorkbench.
Publication object: The interface to access a CATIAPublication.
Publications object: The collection of the Product publications.

R

RRSSettingAtt object: Interface to handle parameters of IGRIP RRS Tools Options Tab page Role: This interface is implemented by a component which represents the controller of IGRIP RRS Tools Options parameter settings.
RealParam object: Represents the real parameter.
RectPattern object: Represents the rectangular pattern.
RectilinearBiDimFeatEdge object: 1-D boundary belonging to a feature whose topological result is two dimensional, the boundary having a rectilinear geometry.
RectilinearMonoDimFeatEdge object: 1-D boundary belonging to a feature whose topological result is one dimensional, the boundary having a rectilinear geometry.
RectilinearTriDimFeatEdge object: 1-D boundary belonging to a feature whose topological result is three dimensional, the boundary having a rectilinear geometry.
Reference object: Represents an object pointing to another object.
ReferenceFrame object: Interface designed to manage reference frame associated to a TPS.
References object: A collection of all the references aggregated in an object.
Relation object: Represents the relation object.
Relations object: Represents the collection of relations of the part or the product.
ReleaseAct object: Interface representing a Release activity.
Remove object: Represents the remove, or substract boolean operation.
RemoveFace object: Represents the Remove Face operation.
RenderingEnvironment object: Represents a Environment object.
RenderingEnvironmentWall object: Represents a Environment object.
RenderingEnvironments object: A collection of all the Rendering Environments objects.
RenderingLight object: Represents a Rendering Light object.
RenderingLights object: A collection of all the Rendering Lights objects.
RenderingMaterial object: Represents an RenderingMaterial object.
RenderingSettingAtt object: The interface to access a CATIARenderingSettingAtt.
RenderingShooting object: Represents a Material object.
RenderingShootings object: A collection of all the Rendering Shootings objects.
Repartition object: Represents the repartition.
ReplaceFace object: Represents the Replace Face operation.
Replay object
ReportGenerationSheetSettingAtt object: The interface to access a CATIAReportGenerationSheetSettingAtt.
Resource object: The object that represents a resource.
ResourceCollection object: Interface representing collection of Resources.
ResourceProgramManager object: Represents the Resource Program manager of a resource.
Resources object: The collection of resources related to the current activity.
Revolution object: Represents the revolution-based shapes.
Rib object: Represents the rib shape.
RobAnalysisHeartBeatUsageSettingAtt object: Interface to handle the parameter used to set as an option, to either enable or disable robot heart beat rate while motion planning, in the Infrastructure-DELMIA Infrastructure-Robot Analysis Tools Options Tab page.
RobAnalysisSettingAtt object: Interface to handle parameters of Infrastructure-DELMIA Infrastructure-Robot Analysis Tools Options Tab page.
RobControllerFactory object: Interface to manipulate Robot Controller.
RobGenericController object
RobotMotion object: Represents a Robot Motion.
RobotTask object: Represents the Robot Task.
RobotTaskCloneFactory object: Represents the Clone Factory for Robot Tasks.
RobotTaskFactory object: Represents the Task Creation Factory for Robots.
Rotate object: Represents the shape rotate feature object.
Roughness object: Interface to manage Roughness TPS.
RpmReport object
Rule object: Represents the program relation.

S

SPAWorkbench object: The object to manage all Space Analysis objects.
SWKAnthro object: This interface manages the anthropometry of the manikin.
SWKAnthroVariable object: This interface is used to access an anthropometric variable.
SWKBody object: This interface represents the body of the manikin.
SWKBodyElement object: This interface is used to access a body element (segment, ellipse, .
SWKCenterOfGravity object: This interface represents the center of gravity of the manikin.
SWKDOF object: This interface deals with a degree of freedom (DOF) of a manikin.
SWKErgo object: This interface groups the properties giving access to all the ergonomic studies that can be performed on a manikin.
SWKErgoCarry object: This interface deals the carry ergonomic analysis.
SWKErgoLiftLower object: This interface deals the lift/lower ergonomic analysis.
SWKErgoPushPull object: This interface deals the push/pull ergonomic analysis.
SWKErgoRULA object: This interface deals the RULA ergonomic analysis.
SWKIKConstraint object: This interface manages the constraint of the manikin.
SWKIKManager object: This interface represents the IK manager of the manikin.
SWKLineOfSight object: This interface deals with a line of sight of a manikin.
SWKLineOfSightNode object: This interface characterizes a node.
SWKManikin object: This interface groups the methods directly related to the definition of a manikin.
SWKManikinPart object: This interface represents any part of the manikin that is persistent.
SWKNode object: This interface characterizes a node.
SWKSegment object: This interface deals with a segment of a manikin.
SWKSegmentNode object: This interface characterizes a segment node.
SWKVision object: This interface manages the vision of the manikin.
Sampled object: The interface to access a CATIASampled based object.
Sampleds object: The collection of all the Sampled objects currently contained in the current document.
SampledsNode object: The interface to access a CATIASampledsNode.
Scaling object: Represents the scaling shape.
Scaling2 object: Represents the Scaling2 feature object.
Scene object: Represent the scene.
SceneProductData object: The interface to access a CATIASceneProduct Using this prefered syntax will enable mkdoc to document your class.
SceneWorkbench object: Represent the access point to scenes management.
Scenes object: A collection of scenes contained in a given ProductDocument.
SchAnnotationBreak object: Manage an annotation break operations.
SchApp2DZoneFrom3DZone object: Manage a 2D zone that is dropped off from 3D counterpart.
SchAppClass object: Manage the class hierarchy of an application model.
SchAppCntrColor object: Manage graphical representation of schematic connector.
SchAppCntrData object: Manage a schematic connector data.
SchAppCntrDocLink object: Manage a schematic connector.
SchAppCntrFlow object: Manage the technical attributes of a schematic connector.
SchAppCntrName object: Manage a schematic connector.
SchAppCntrShow object: Manage graphical representation of schematic connector.
SchAppCompatible object: Provide application rules of how to connect objects.
SchAppComponent object: Represents an application component object.
SchAppConnectable object: Represents an application object that can be connected to others.
SchAppConnection object: Manage a schematic connection.
SchAppConnector object: Manage a schematic connector.
SchAppDeleteCheck object: Manage the deletion of a schematic object.
SchAppDeleteCheck2 object: Manage the deletion of a schematic object.
SchAppEnvironment object: Manage the application environment in a schematic session.
SchAppGapPriority object: Manage the graphical representation of a route.
SchAppGroup object: Manage application group.
SchAppModelInit object: Manage the initialization of application model.
SchAppMultiImage object: Interface to manage the image object in the Multi-Image-Object concept.
SchAppMultiImageMaster object: Interface to manage the master object in the Multi-Image-Object concept.
SchAppObjectFactory object: Application factory to create application objects.
SchAppObjectFactory2 object: Application factory to create application objects.
SchAppReplace object: Manage a schematic component.
SchAppRoute object: Manage a schematic route.
SchAppRoute2 object: Manage a schematic route.
SchAppScalingRule object: Provide application rule of how to scale schematic objects.
SchAppZone object: Manage a schematic zone.
SchArrowDisplay object: Manage the graphical representation of a schematic route.
SchBaseFactory object: Factory to create basic schematic objects.
SchBoundaryElem object: Manage a boundary element of a schematic zone.
SchCatalogComponent object: Manage a schematic component catalog.
SchCatalogRoute object: Manage a schematic route catalog.
SchCntrConnect object: Manage the a schematic connector.
SchCntrDocLink object: Manage the on-off sheet connector.
SchCntrGraphic object: Manage the graphical representation of a schematic connector.
SchCntrLocation object: Manage the location of a schematic connector.
SchCompConnector object: Manage the connectors of a schematic component.
SchCompFlow object: Manage the internal flow of a schematic component.
SchCompGraphic object: Manage the graphical representation of a schematic component.
SchCompGroupExt object: Manage the graphical representation of a temporary group of schematic objects.
SchCompatible object: Provides connecting rule to schematic objects.
SchComponent object: Manage a schematic component.
SchComponent2 object: Manage a schematic component.
SchComponentGroup object: Represents a temporary group of schematic objects for component placement.
SchConnectable object: Represents schematic objects that can be connected to others.
SchDropOffView object: Manage the drop off views in a schematic viewer.
SchFrameInfo object: Manage the background view of a schematic viewer.
SchGRR object: Manage the graphical representation of a schematic object.
SchGRRCntr object: Manage the graphical representation of a schematic connector.
SchGRRComp object: Manage the graphical representation of a schematic component.
SchGRRFactory object: Factory to create graphical representations of schematic objects.
SchGRRRoute object: Manage the graphical representations of a schematic route.
SchGRRRoute2 object: Manage the graphical representation of a schematic route.
SchGRRRouteAlternate object: Manage the graphical styles for alternative route graphics.
SchGRRRouteEllipse object: Manage the graphical representation of a schematic route.
SchGRRZone object: Manage the graphical representation of a schematic zone.
SchGapDisplay object: Manage the graphical representation of a schematic route.
SchInternalFlow object: Represents the internal flow object in a schematic component.
SchListOfBSTRs object: Represents a non-persistant list of character strings to be used with Schematic IDLs.
SchListOfDoubles object: Represents a list of DOUBLEs to be used with Schematic IDLs.
SchListOfLongs object: Represent a non-persistant list of LONGs to be used with schematic IDLs.
SchListOfObjects object: Represent a non-persistant list of schematic objects.
SchMovable object: Manage the transformation of a schematic component.
SchMovable2 object: Manage rotation of a schematic object.
SchNetworkAnalysis object: Represents a schematic network.
SchObsoleteModel object: Manage obsolete model elements.
SchPostReplace object: Manage post component replacement behaviors.
SchReplace object: Manage existing schematic component instances.
SchRoute object: Manage a schematic route data.
SchRouteAlternateGraphic object: Manage alternative graphical primitives of a schematic route.
SchRouteGraphic object: Manage graphical primitives representing a schematic route.
SchRouteSymbol object: Manage a symbol placed on a route.
SchSession object: Represents a schematic session.
SchTempListFactory object: Create temporary (non-persistent) lists to be used in VB environment.
SchUpdateInstances object: Interface to update all component instances when the catalog reference component has been changed.
SchWorkbench object: Represents a workbench on a schematic document.
SchZone object: Manage zone boundaries.
SchZoneGraphic object: Manage graphical representations of a schematic zone.
SchZoneMembership object: Manage zone memberships.
SchematicExtension object: Manage schematic extensions.
SchematicRoot object: Represents the top node of the schematic object tree.
SddProduct object: Interface to create a SDD Design Unit under a Product.
SearchSettingAtt object: Represents the setting controller for the Search property tab page.
Section object: Represents the Section object.
SectioningSettingAtt object: The interface to access a CATIASectioningSettingAtt.
Sections object: A collection of all Section objects currently managed by the application.
SelectedElement object: Represents an element contained by a Selection object.
Selection object: Represents the selection.
SelectionSets object: Interface to manage the Selection Sets in a document.
SemanticGDT object: Interface managing Semantic GDT.
SemanticGDTCommonZone object: Interface for accessing Common Zone, CZ, modifier on a Semantic GDT (ISO Standard only).
SemanticGDTFrameExtension object: Interface to parse Semantic GDT auxiliary feature.
SemanticGDTNxDisplay object: Interface to distinguish Collection of features from Separate features GDT.
SendToService object: This interface allows to use 'Send To' functionalities through an API.
ServerStatisticsSettingAtt object: Interface for Server statistic Controler Role: the server statistics controler manages the values of all or only a part of the attributes available for the thematic.
SessionStatisticsSettingAtt object: Interface for Session statistic Controler Role: the session statistics controler manages the values of all or only a part of the attributes available for the thematic.
SetOfEquation object: Represents the set of equations object.
SettingController object: Represents the base object for setting controllers.
SettingControllers object: A collection of all the setting controllers objects currently managed by the application.
SettingRepository object
SewSurface object: Represents the sewing operation.
SfdProduct object: Interface to create a SFD Functional System under a Product.
SfmConnectionParameters object: Interface to get the parameters defining the UDF for Slots and Endcuts.
SfmEndcut object: Interface to manage the EndCut on Super Profile.
SfmEndcutManager object: Interface to get information on available endcuts from catalog.
SfmFactory object: Interface to create Structure Functional Modeler Objects.
SfmFunctionFactory object: Gets the Function Factory.
SfmManager object: Services about Structure Functional Modeler applications: SFD and SDD.
SfmMember object: Interface to manage the structure frame modeling member object Role: Allows accessing and setting of member's data.
SfmMember2Points object: Interface to manage Member created with one curve and a reference surface.
SfmMemberCurve object: Interface to manage Member created with one curve and a reference surface.
SfmMemberPlane2Curves object: Interface to manage a Member created with two curves and a plane.
SfmMemberPointLength object: Interface to manage Member created with one point, one direction and a length.
SfmMemberPointUpToLimit object: Interface to manage Member created with one point, one direction and one limit.
SfmMemberSurfSurf object: Interface to manage Member created by the intersection of two surfaces.
SfmObject object: Interface to manage the category of a SfmObject.
SfmObjectExt object: Interface to retrieve the computed attributes of SFM objects.
SfmOpening object: Defines Edition Techniques for Openings created using sketch and 3D Object.
SfmOpeningContoursMgr object: Gets CATIASfmOpeningContoursMgr.
SfmOperationFactory object: Gets the Operation Factory.
SfmPositioningStrategyManager object: Gets CATIASfmPositioningStrategyManager.
SfmProfile object: Interface to manage the structure frame modeling member object Role: Allows accessing and setting of member's data.
SfmReferences object: A Collection of U and V Reference elements for Standard Opening.
SfmSlot object: Interface to Get and Set inputs to existing Slot.
SfmSlots object: Interface to create, remove and access existing slot.
SfmSplitPlate object: Interface to manage the Structure Functional Modeler Split plate object.
SfmSplitPlates object: Interface to manage the Structure Functional Modeler Split Plates object.
SfmStandardContourParameters object: Interface to access Contour Parametrs from/to the collection.
SfmStandardOpening object: Defines Edition Techniques for Standard Openings.
SfmStandardPosStrategyParameters object: Sets the Required data for Positioning the Contour.
SfmStiffener object: Interface to manage the structure frame modeling Stiffener object Role: Allows accessing and setting of Stiffener's data.
SfmStiffenerOnFreeEdge object: Interface to manage different attributes of Stiffener on free edge.
SfmSuperPlate object: Interface to manage the Structure Functional Modeler SuperPlate object.
SfmWeld object: Interface to manage the Structure Functional Modeler Weld object.
SfmWelds object: Interface to manage the Structure Functional Modeler Weld object's collection.
Shaft object: Represents the shaft shape.
Shape object: Represents the Shape object.
ShapeFactory object: Represents the factory for shapes to create all kinds of shapes that may be needed for part design.
ShapeInstance object: The interface to access a CATIAShapeInstance.
Shapes object: The collection of the shapes making up a body.
Shell object: Represents the shell shape.
ShiftedProfileTolerance object: Interface for accessing shifted tolerance zone informations of a TPS.
Shot object: The interface to access a CATIAShot.
Shots object: The collection of all shot objects contained in the current sampled.
Shuttle object: The interface to access a CATIAShuttle.
Shuttles object: The interface to access a CATIAShuttles Using this prefered syntax will enable mkdoc to document your class.
Silhouette object: Interface to access a CATIASilhouette.
Silhouettes object: Interface to compute Silhouettes.
SimTraceSettingAtt object: Interface to handle parameters of Infrastructure-DELMIA Infrastructure-Simulation Trace Tools Options Tab page.
Simplifications object: Interface to compute Simplifications.
SimulationInitState object: Interface used to save/restore the simulation initial state.
SimulationSettingAtt object: Interface to handle parameters of DELMIA Simulation Tools Options Tab page Role: This interface is implemented by a component which represents the controller of Simulation Tools Options parameter settings.
Sketch object: The Sketch is a 2D based element comprising constrained 2D geometrical elements.
SketchBasedShape object: Represents the shapes based on sketched 2D geometry.
Sketches object: The body's collection of sketches not yet used by any shape.
Slot object: Represents the slot shape.
Solid object: Represents an imported solid object.
SolidCombine object: The interface to access a CATIASolidCombine.
SpecV4SettingAtt object: Represents the V4/V5 SPEC setting controller object.
SpecsAndGeomWindow object: Represents a window featuring a specification viewer and a geometry viewer.
SpecsViewer object: Represents the specification tree viewer.
Spline2D object: Class defining a spline in 2D Space.
Split object: Represents the split operation.
StepSettingAtt object: The interface to access a CATIAStepSettingAtt.
StiDBChildren object: Represents all the Children of a CATIAStiDBItem.
StiDBItem object: Represents the SmarTeam Integration Object, that is to say the Document coming from SmarTeam database.
StiEngine object: Represents the SmarTeam Integration Engine, that is to say the entry point to the CATIA/SmarTeam Integration.
Stiffener object: Represents the stiffener shape.
StrAnchorPoint object: Represents an anchor point.
StrAnchorPoints object: A collection of the anchor points of a section object.
StrComputeServices object: Represents a structure service object.
StrCutback object: Represents the cutback object.
StrCutoutFeature object: Represents a Cutout Feature.
StrFeatureFactory object: Represents the Factory Object for Structure Features.
StrFoundation object: Represents a structure foundation assembly.
StrFoundations object: A collection of the Foundation objects contained in a given Product object of a ProductDocument object.
StrMember object: Represents a member object.
StrMemberExtremity object: Represents an extremity of a member object.
StrMembers object: A collection of the Member objects contained in a given Product object of a ProductDocument object.
StrNibblingFeature object: Represents a Nibbling Feature.
StrObject object: Represents a structure object.
StrObjectExt object: Represents a structure object.
StrObjectFactory object: Represents the factory object for all the structure objects.
StrParam object: Represents the string parameter.
StrPlate object: Represents a structure plate object.
StrPlates object: A collection of the Plate objects contained in a given Product object of a ProductDocument object.
StrSection object: Represents the section object.
StrWorkbench object: Represents the structure workbench object.
SurfaceBasedShape object: Represents the shapes based on Surface.
Sweep object: Represents the sweep shape.
SweptVolume object
SweptVolumes object: Interface to compute swept volumes.
Symmetry object: Represents the shape symmetry feature object.
SystemConfiguration object: Provides abstractions to resources which depend on the platform or the current configuration.
SystemService object: Represents an object which provides system services.

T

TCPTrace object: Interface representing a TCP trace.
TCPTraceActivity object: Interface representing TCPTraceActivity.
TCPTraceManager object: Interface representing an accessor to TCP traces object from a product.
TCPTraceManagerGraphics object: Interface used to modify the default graphical properties of TCP traces.
TPSParallelOnScreen object: Interface for Parallel On Screen.
TPSView object
TPSViewFactory object: Represents the TPS view factory object.
TPSViews object: Interface for collection of TPS Views CATIATPSView.
Tag object: Interface representing a Tag.
TagFactory object: Interface representing Tag factory.
TagGroup object: Interface representing a TagGroup.
TagGroupFactory object: Interface representing TagGroup factory.
TangentPlane object: Interface for accessing Tangent Plane modifier on a TPS.
Task object: Represents the Task of a resource.
Text object: Interface for the TPS Text object.
TextStream object: The textstream object allows to manage input and output for a text stream.
ThickSurface object: Represents the ThickSurface feature.
Thickness object: Represents the thickness shape.
Thread object: Represents the Thread feature.
ThreeDCuts object
TolerancePerUnitBasisRestrictiveValue object: Interface for accessing tolerance per unit basis restrictive value on a TPS.
ToleranceSheetSettingAtt object: The interface to access a CATIAToleranceSheetSettingAtt.
ToleranceUnitBasisValue object: Interface for accessing values of the tolerance unit basis on a TPS.
ToleranceZone object: Interface for accessing tolerance zone informations of a TPS.
Track object: The interface to access a CATIATrack.
Tracks object: A collection of all the track objects contained in the current document.
TransformationShape object: Represents the shapes based on a transformation of another shape.
Translate object: Represents the hybrid shape translate feature object.
TreeTabSettingAtt object
TreeVizManipSettingAtt object: The Interface to retrieve and set the visual information on the specification tree.
TriDimFeatEdge object: 1-D boundary belonging to a feature whose topological result is three dimensional.
TriDimFeatVertexOrBiDimFeatVertex object: 0-D boundary belonging to a feature whose topological result is three dimensional or two dimentional.
Trim object: Represents the Trim, or union trim boolean operation.
TritangentFillet object: The Tritangent Fillet feature : a fillet is built between 3 faces, 2 faces will be relimited, the third one ("face to remove") will be used for fillet tangency ; this face will disappear within the resulting shape.
TypeESSObjectSettingAtt object: The interface to access a CATIATypeESSObjectSettingAtt.

U

Unit object: Represents CATIAUnit object.
Units object: Represents the collection of Units.
UnitsSheetSettingAtt object: The interface to access a CATIAUnitsSheetSettingAtt.
UnmountActivity object: Interface representing a Unmount Activity.
UserPattern object: Represents the user pattern.
UserRepartition object: Represents the User Pattern repartition.
UserSurface object
UserSurfaces object

V

V4V5SpaceSettingAtt object: Represents the object to handle the setting parameters of the "V4V5 Space" tab page.
V4WritingSettingAtt object: Represents the Saving As V4 Data setting controller object.
VarRadEdgeFillet object: Represents the edge fillet shape with a variable radius.
VerifTabSettingAtt object
Vertex object: 0-D boundary.
VibrationVolumes object
ViewCharacteristicCurvesSettingAtt object: Represents the CATIA Sheet Metal Aerospace Display setting controller object.
Viewer object: Represents the viewer.
Viewer2D object: Represents a 2D viewer.
Viewer3D object: Represents a 3D viewer.
Viewers object: A collection of all the Viewer objects currently attached to a window.
Viewpoint2D object: Represents the 2D viewpoint.
Viewpoint3D object: Represents the 3D viewpoint.
VisPropertySet object: Represents the graphic properties for the current selection.
VisualizationSettingAtt object: The interface to access a CATIAVisualizationSettingAtt.
VrmlSettingAtt object: The interface to access a CATIAVrmlSettingAtt.

W

WIBuyOff object
WIChangeNotification object
WIDataCollection object
WIText object
WITextAccessEI object
WalkActivity object
Weld object
Window object: Represents the window.
Windows object: A collection of all the Window objects currently managed by the application.
WorkGeneralSettingAtt object: Interface representing xxx.
Workbench object: Represents a workbench on a document.
WorkbenchStatisticsSettingAtt object: Interface for Workbench statistic Controler.
WorkerActivity object: The object that represents an Worker activity.
Wrapping object
Wrappings object

Z

ZeroDimFeatVertexOrWireBoundaryMonoDimFeatVertex object: 0-D boundary beeing either an isolated point or the extremity of a feature whose topological result is one dimensional.