CylindricalFace (Object)

2-D boundary with a cylindrical geometry.
Role: This object may be, for example, the lateral face of a cylinder.
You will create a CylindricalFace object using the , , or method. Then, you pass it to the operator (such as ).
The lifetime of a CylindricalFace object is limited, see .
Example:
This example asks the end user to select a shape to pattern and a cylindrical face, and creates a circular pattern of the shape. The cylindrical face specifies the rotation axis. 
 Dim InputObjectType(0)
 Set Document = CATIA.ActiveDocument
 Set Selection = Document.Selection
 'We propose to the user that he select the shape to pattern
 InputObjectType(0)="SketchBasedShape"
 Status=Selection.SelectElement2(InputObjectType,"Select the shape to pattern",true)
 if (Status = "cancel") then Exit Sub
 Set Shape = Selection.Item(1).Value
 Selection.Clear
 'We propose to the user that he select the cylindrical face
 InputObjectType(0)="CylindricalFace"
 Status=Selection.SelectElement2(InputObjectType,"Select the cylindrical face",true)
 if (Status = "cancel") then Exit Sub
 Set CylindricalFace = Selection.Item(1).Value
 Set RotationCenter = Document.Part.CreateReferenceFromName("")
 Set CircPattern = ShapeFactory.AddNewCircPattern(Shape,1,4,20.0,45.0,1,4,RotationCenter,CylindricalFace,True,0.0,True)
 Document.Part.Update

Methods


Sub GetDirection( oDirection)
Returns the direction of the cylindrical face axis
Parameters:
oDirection[0]
The X Coordinate of the axis direction
oDirection[1]
The Y Coordinate of the axis direction
oDirection[2]
The Z Coordinate of the axis direction
Sub GetOrigin( oOrigin)
Returns the origin of the cylindrical face axis.
Parameters:
oOrigin[0]
The X Coordinate of the axis origin
oOrigin[1]
The Y Coordinate of the axis origin
oOrigin[2]
The Z Coordinate of the axis origin