Machining Operations toolbar

The Machining Operations toolbar contains the commands for creating and editing 2.5 to 5-axis Milling and Drilling operations.

	See Drilling toolbar
	See Create a Point to Point Operation
	See Create a Pocketing Operation
	See Create a Facing Operation
	See Create a Curve Following Operation
	See Contouring toolbar
	See Create a 4-Axis Pocketing Operation
	See Roughing toolbar
	See Sweeping toolbar
	See Create a Pencil Operation
	See ZLevel toolbar
	See Machining a Complete Part
	See Contour toolbar
	See Milling Face toolbar
	See Create a Multi-Axis Helix Machining Operation

Contouring Container

	See Create a Profile Contouring Operation
	See Create a Groove Milling Operation
	See Trochoid Milling Operations
	See Create a Multi-Axis Curve Following Operation
	See Create a Multi-Axis Flank Contouring Operation

Roughing Container

	See Create a Roughing Operation
	See Create a Sweep Roughing Operation
	See Create a Stiffener Operation
	See Create a Plunge Milling Operation

Sweeping Container

	See Create a Sweeping Operation
	See Create a 4-Axis Curve Sweeping Operation
	See Create a Multi-Axis Sweeping Operation

ZLevel Container - Icons for creating and editing 3-axis Milling operations.

	See Create a ZLevel Operation
	See Create a Multi-Axis Tube Machining Operation

Contour Container

	See Create a Contour Driven Operation
	See Create an Isoparametric Machining Operation
	See Create a Multi-Axis Contour Driven Operation

Milling Face Container

	See Create a Spiral Milling Operation
	See Create a Multi-Axis Spiral Milling Operation

The icons for creating and editing Drilling operations.

	See Create a Drilling Operation
	See Create a Spot Drilling Operation
	See Create a Drilling Dwell Delay Operation
	See Create a Drilling Deep Hole Operation
	See Create a Drilling Break Chips Operation
	See Create a Tapping Operation
	See Create a Reverse Threading Operation
	See Create a Thread without Tap Head Operation
	See Create a Boring Operation
	See Create a Boring and Chamfering Operation
	See Create a Boring Spindle Stop Operation
	See Create a Reaming Operation
	See Create a Counterboring Operation
	See Create a Countersinking Operation
	See Create a Chamfering Two Sides Operation
	See Create a Back Boring Operation
	See Create a T-Slotting Operation
	See Create a Circular Milling Operation
	See Create a Thread Milling Operation
	See Create a Sequential Axial Operation
	See Create a Sequential Groove Operation