Menu Bar

This is the menu bar for the 3 Axis Surface Machining workbench.

Tasks corresponding to general menu commands are described in the Version 5 Infrastructure User's Guide. 

Below are the menus that specifically concern 3 Axis Surface Machining.

	Insert menu
			Machining Operations	Accesses all machining operations
			Auxiliary Operations	Accesses auxiliary operations
			Probing Operations	Accesses probing operations
			Machining Features	Accesses the definition of machining areas
	Machining Operations
			For	See
			Roughing Operations	Roughing Operations
			Sweeping Operations	Sweeping Operations
			Pencil	Pencil Operations
			ZLevel	ZLevel Machining
			Contour-driven	Contour-driven Machining
			Spiral milling	Spiral Milling
			Profile Contouring	Create a Profile Contouring Operation
			Axial Machining Operations	2.5 to 5-axis Drilling Operations
	Roughing Operations
			Roughing	Roughing
			Sweep Roughing	Sweep Roughing
			Plunge Milling	Plunge Milling
	Sweeping Operations
			Sweeping	Sweeping
			4-Axis Curve Sweeping	Creating a 4-Axis Curve Sweeping Operation
	Probing Operations
			Holes or Pins Probing	Probing Holes
			Slots or Ribs Probing	Probing Ribs
			Corner Probing	Probing Corners
			Multi-Points Probing	Probing with Multi-Points
	Machining Features
			Milling Features	Milling Features
			Machining Axis System	Insert a Machining Axis or Origin
			Machining Pattern	Machining Patterns
	Milling Features
			Geometrical Zone	Using Geometrical Zones
			Machining/Slope Area	Defining an Area to Machine
			Rework Area	Defining an Area to Rework
			Offset Group	Offset Group