Setting Standard Parameters

Aerospace Sheetmetal Design parameters are located in the Standard > Aerospace Sheetmetal Design > Characteristic Curves node of the standard XML file (available via Tools > Standard > Generalcategory > AerospaceSheetMetalDesign.xml file):

Graphic Properties

Visibility

Flange Features
Stamping Features

Visibility parameters apply to folded and unfolded 2D views (Generative Drafting workbench).
Users can manage the visibility of characteristic curves in 3D views through settings. Refer to Display Settings in the Customizing chapter for more information.

Refer to Before You Begin Setting Standard Parameters for more information on how to set standard parameters.

Graphic Properties

Characteristic Curves	Parameter Name	Value	Description
BTL Base/ BTL Support/ IML/ OML/ Second OML/ CLB	Color	Color	Defines the color of the characteristic curves (BTL Base/ BTL Support/ IML/ OML/ Second OML/ CLB).
	Linetype	Integer	Specifies the linetype of the characteristic curves (BTL Base/ BTL Support/ IML/ OML/ Second OML/ CLB).
	Thickness	Integer	Specifies the line thickness of the characteristic curves (BTL Base/ BTL Support/ IML/ OML/ Second OML/ CLB).
	Trimmed	Yes/No	Default value is No. Set this parameter Yes to display characteristic curves on unfold view of drawings from parts that are trimmed by the unfolded view of the sheetmetal solid.
	Broken Display	Yes/No	Default value is No. Set this parameter Yes to display two parts of the characteristic curves on unfold view of drawings, by breaking the curves for a given length from the start and end vertices of the wire. This parameter will be taken into account for a given characteristic curve only if its Trimmed parameter is also set to Yes.
	Breaking Length	in mm	Specifies the distance to split the corresponding characteristic curve if the Broken Display parameter set to Yes.
	Clearance	Yes/No	Default value is No. This parameter will be taken into account for a given characteristic curve only if its Trimmed parameter is also set to Yes.
	Clearance Length	in mm	Specifies the distance to split the corresponding characteristic curve if the Clearance parameter set to Yes.

Visibility

Flange Features

Parameter	Value	Description
Flange > Brake Formed > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of brake formed surfacic flanges.
Flange > Brake Formed > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of brake formed surfacic flanges.
Flange > Brake Formed > BTL Support > Folded View	Yes/No	Specifies whether the BTL support should be projected in 2D folded views of brake formed surfacic flanges.
Flange > Brake Formed > BTL Support > Unfolded View	Yes/No	Specifies whether the BTL support should be projected in 2D unfolded views of brake formed surfacic flanges.
Flange > Brake Formed > IML > Folded View	Yes/No	Specifies whether the IML should be projected in 2D folded views of brake formed surfacic flanges.
Flange > Brake Formed > IML > Unfolded View	Yes/No	Specifies whether the IML should be projected in 2D unfolded views of brake formed surfacic flanges.
Flange > Brake Formed > OML > Folded View	Yes/No	Specifies whether the OML should be projected in 2D folded views of brake formed surfacic flanges.
Flange > Brake Formed > OML > Unfolded View	Yes/No	Specifies whether the OML should be projected in 2D unfolded views of brake formed surfacic flanges.
Flange > Brake Formed > Second OML > Unfolded View	Yes/No	Specifies whether the Second OML should be projected in 2D unfolded views of brake formed surfacic flanges.
Flange > Brake Formed > CLB > Unfolded View	Yes/No	Specifies whether the CLB should be projected in 2D unfolded views of brake formed flanges.
Flange > Hydro-press Formed > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of hydro-press formed surfacic flanges.
Flange > Hydro-press Formed > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of hydro-press formed surfacic flanges
Flange > Hydro-press Formed > BTL Support > Folded View	Yes/No	Specifies whether the BTL support should be projected in 2D folded views of hydro-press formed surfacic flanges.
Flange > Hydro-press Formed > BTL Support > Unfolded View	Yes/No	Specifies whether the BTL support should be projected in 2D unfolded views of hydro-press formed surfacic flanges.
Flange > Hydro-press Formed > IML > Folded View	Yes/No	Specifies whether the IML should be projected in 2D folded views of hydro-press formed surfacic flanges.
Flange > Hydro-press Formed > IML > Unfolded View	Yes/No	Specifies whether the IML should be projected in 2D unfolded views of hydro-press formed surfacic flanges.
Flange > Hydro-press Formed > OML > Folded View	Yes/No	Specifies whether the OML should be projected in 2D folded views of hydro-press formed surfacic flanges.
Flange > Hydro-press Formed > OML > Unfolded View	Yes/No	Specifies whether the OML should be projected in 2D unfolded views of hydro-press formed surfacic flanges.
Flange > Hydro-press Formed > Second OML > Unfolded View	Yes/No	Specifies whether the Second OML should be projected in 2D unfolded views of hydro-press formed surfacic flanges.
Flange > Hydro-press Formed > CLB > Unfolded View	Yes/No	Specifies whether the CLB should be projected in 2D unfolded views of hydro-press formed flanges.

Visibility

Stamping Features

Parameter	Value	Description
Flanged Hole > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of flanged holes.
Flanged Hole > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of flanged holes.
Flanged Hole > IML > Folded View	Yes/No	Specifies whether the IML should be projected in 2D folded views of flanged holes.
Flanged Hole > IML > Unfolded View	Yes/No	Specifies whether the IML should be projected in 2D unfolded views of flanged holes.
Flanged Hole > OML > Folded View	Yes/No	Specifies whether the OML should be projected in 2D folded views of flanged holes.
Flanged Hole > OML > Unfolded View	Yes/No	Specifies whether the OML should be projected in 2D unfolded views of flanged holes.
Bead > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of beads.
Bead > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of beads.
Circular Stamp > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of circular stamps.
Circular Stamp > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of circular stamps.
Surface Stamp > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of surface stamps.
Surface Stamp > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of surface stamps.
Flanged Cutout > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of flanged cutouts.
Flanged Cutout > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of flanged cutouts.
Flanged Cutout > IML > Folded View	Yes/No	Specifies whether the IML should be projected in 2D folded views of flanged cutouts.
Flanged Cutout > IML > Unfolded View	Yes/No	Specifies whether the IML should be projected in 2D unfolded views of flanged cutouts.
Flanged Cutout > OML > Folded View	Yes/No	Specifies whether the OML should be projected in 2D folded views of flanged cutouts.
Flanged Cutout > OML > Unfolded View	Yes/No	Specifies whether the OML should be projected in 2D unfolded views of flanged cutouts.
Stiffening Rib > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of stiffening ribs.
Stiffening Rib > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of stiffening ribs.
Curve Stamp > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of curve stamps.
Curve Stamp > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of curve stamps.
User Stamp > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of user stamps.
User Stamp > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of user stamps.
Other Stamping Types > BTL Base Feature > Folded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D folded views of other stamping types.
Other Stamping Types > BTL Base Feature > Unfolded View	Yes/No	Specifies whether the BTL base feature should be projected in 2D unfolded views of other stamping types.