Display  

 
 

This page deals with the following category of options in the Display tab:

Characteristic Curves

Reset with Standard Settings

Click this button to reset settings on this tab according to the parameters defined in the standards. For more information on standards, refer to the Administration Tasks chapter in the Aerospace Sheetmetal Design User's Guide.

Clear all Check Boxes

Removes the check mark from all check boxes on this tab.
 

Surfacic Flange Features/ Swept Flange Features

 

Brake formed
 
  Specify whether the BTL Base Feature, BTL Support, IML, OML, Second OML, and CLB should be seen in folded and unfolded 3D views of brake formed surfacic flanges, by selecting respectively the Folded view and Unfolded view check boxes.

The default value for these check boxes is specified in the standards.
 

Hydro-pressed
 
  Specify whether the BTL Base Feature, BTL Support, IML, OML, Second OML, and CLB should be seen in folded and unfolded 3D views of hydro-pressed surfacic flanges, by selecting respectively the Folded view and Unfolded view check boxes.

The default value for these check boxes is specified in the standards.
 

Stamping Features

 

Flanged Hole
 
  Specify whether the BTL Base Feature, IML and OML should be seen in folded and unfolded 3D views of flanged holes, by selecting respectively the Folded view and Unfolded view check boxes.

The default value for these check boxes is specified in the standards.
 

Bead
 
  Specify whether the BTL Base Feature should be seen in folded and unfolded 3D views of beads, by selecting respectively the Folded view and Unfolded view check boxes.

The default value for these check boxes is specified in the standards.
 

Circular Stamp
 
  Specify whether the BTL Base Feature should be seen in folded and unfolded 3D views of circular stamps, by selecting respectively the Folded view and Unfolded view check boxes.

The default value for these check boxes is specified in the standards.
 

Surface Stamp
 
  Specify whether the BTL Base Feature should be seen in folded and unfolded 3D views of surface stamps, by selecting respectively the Folded view and Unfolded view check boxes.

The default value for these check boxes is specified in the standards.
 

Flanged Cutout
 
  Specify whether the BTL Base Feature, IML and OML should be seen in folded and unfolded 3D views of flanged cutouts, by selecting respectively the Folded view and Unfolded view check boxes.

The default value for these check boxes is specified in the standards.
 

Stiffening Rib
 
  Specify whether the BTL Base Feature should be seen in folded and unfolded 3D views of stiffening ribs, by selecting respectively the Folded view and Unfolded view check boxes.

The default value for these check boxes is specified in the standards.
 

Curve Stamp
 
  Specify whether the BTL Base Feature should be seen in folded and unfolded 3D views of curve stamps, by selecting respectively the Folded view and Unfolded view check boxes.

The default value for these check boxes is specified in the standards.
 

User Stamp
 
  Specify whether the BTL Base Feature should be seen in folded and unfolded 3D views of user stamps, by selecting respectively the Folded view and Unfolded view check boxes.

The default value for these check boxes is specified in the standards.
 

Other Stamping Types
 
  Specify whether the BTL Base Feature should be seen in folded and unfolded 3D views of other stamping types, by selecting respectively the Folded view and Unfolded view check boxes.

The default value for these check boxes is specified in the standards.