CatDrawingViewType (Enumeration)

enum CatDrawingViewType {
  catViewBackground,
  catViewFront,
  catViewLeft,
  catViewRight,
  catViewTop,
  catViewBottom,
  catViewRear,
  catViewAuxiliary,
  catViewIsom,
  catViewSection,
  catViewSectionCut,
  catViewDetail,
  catViewUntyped,
  catViewMain,
  catViewPure_Sketch,
  catViewUnfolded
}
Type of a view.
Values:
Background_View
The background view is the view in the background of the sheet. This view contains in general the frames and title blocks. There is a background view per sheet.
FrontView
The front view is a front representation of a part.
LeftView
The left view is a left representation of a part regarding to the current standard.
RightView
The right view is a right representation of a part regarding to the current standard.
TopView
The top view is a top representation of a part regarding to the current standard.
BottomView
The bottom view is a bottom representation of a part regarding to the current standard.
RearView
The rear view is a rear representation of a part regarding to the current standard.
AuxiliaryView
The auxiliary view is a representation of a part regarding to an user defined projection plane
IsomView
The isom view is a isometric view of a part.
SectionView
The section view is a view of a part which is first sectionned regarding to a user defined profile. The part geometry beside the section plane is visible.
SectionCutView
The section cut view is a view of a part which is first sectionned regarding to a user defined profile. Only the geometry in the section plane is visible.
DetailView
The detail view is a view of a local area of the part. The area boundarie may be a circle or a polyline.
UntypedView
The untyped view is none of those typed views.
Main_View
The main view is the view suporting geometries and annotations for a sheet. In other words, the main view is the default view of a sheet. There is a main view per sheet.
Pure_Sketch
The pure sketch is for internal uses only.
UnfoldedView
To specify an unfolded view of a part.