Composites Design Parameters in Generative View Styles

  Composites Design parameters are located in the Composites Design > Ply, Composites Design > Core or Composites Design > Core Sample nodes of the DefaultGenerativeStyle.xml in the generativeparameters category.
 

Ply

Parameters Value Description
Contour yes/no Determines whether the 3D contours of the plies should be extracted or not.
Exploded Surface yes/no Determines whether the exploded surfaces of the plies should be extracted or not.
Flatten yes/no Determines whether the flatten shapes of the plies should be extracted or not.
Highlight shell yes/no Etermines whether a shaded ply/cut-piece should be generated in the drawing document, without generating the exploded surface in 3D part. The highlight shell inherit its color from the parent ply/cut-piece contour.
Seed point yes/no Determines whether the seed points of the plies should be extracted or not.

Note: Only available if producibility parameters have been computed on this feature.

Seed curve yes/no Determines whether the seed curves of the plies should be extracted or not.

Note: Only available if producibility parameters have been computed on this feature.

Rosette yes/no Determines whether the rosettes of the plies should be extracted or not.
Rosette Representation
  • SimpleColored: 0° and 90° lines (black) + colored line for ply orientation.
  • SimpleDotted: 0° and 90° lines (black) + dotted (black) line for ply orientation.
  • SimpleColoredAndDotted: 0° and 90° lines (black) + colored and dotted (black) line for ply orientation.
  • ExtendedRosetteFull: Complete rosette (colored arrows + values) where arrows are dotted except the ply orientation one.
  • ExtendedRosetteSingleArrow: Ply/cut-piece orientation arrow only (colored arrow + value)
Determines how the rosette is represented (Rosette must be set to yes).
Name yes/no Determines whether the names of the plies/cut-pieces should be extracted or not.
Contour thickness 1-8 Determines the thickness of contours.

Note: With 0 value, the 2D line inherits its thickness from the 3D contour property.

Other geometry yes/no Determines whether the geometry aggregated under the plies should be extracted or not.
Overwrite color inheritance yes/no Forces the color of the plies even if Drafting > ViewDressup > 3DInheritance > Wireframe > Color is set to no.

Note: In the drawing view, ply contour lines may be hidden by 2D representation of surfacic and solid elements. To avoid this, set Project 3D wireframe to Is always visible.
   

The name of ply/cut-piece is generated at anchor point, defined as:

  • Either the seed point location if producibility parameters are defined.
  • Or the projection of the contour center of gravity if located inside the ply contour.
  • Or at the closest point on contour of this center of gravity.

Rosette transfer is computed at the ply/cut-piece anchor point and 0deg/90deg direction axis lines and X fiber direction axis line are displayed.

Symbolic texts indicate the 0deg/90deg axis in 2D view; X fiber direction axis line inherits color from the ply/cut-piece contour. Symbolic texts size for rosette axis and ply name respect the input scale factor. In Drafting, when you modify the scale of a previously generated view containing symbolic texts, not all texts sizes take into account this factor scale. To synchronize texts sizes with the view scaling, select the Apply Scale check box in Text tab of the properties of the selected annotations.
 

Core

Parameters Value Description
Solid yes/no Determines whether the solid should be extracted or not.
Name yes/no Determines whether the name should be extracted or not.
Rosette yes/no Determines whether the rosette should be extracted or not.
Other geometry yes/no Determines whether the geometry aggregated under the core should be extracted or not.
Overwrite color inheritance yes/no Forces the color of the core even if Drafting > ViewDressup > 3DInheritance > Wireframe > Color is set to no.

Note: In the drawing view, ply contour lines may be hidden by 2D representation of surfacic and solid elements. To avoid this, set Project 3D wireframe to Is always visible.

The name of core is generated at the center of gravity of its resulting solid.

Rosette transfer is computed at the projection of the solid center of gravity on the specified support surface and 0deg/90deg direction axis lines and X fiber direction axis line are displayed.

Symbolic texts indicate the 0deg/90deg axis in 2D view; X fiber direction axis line inherits color from the core solid. Composites Design does not display the rosette axis if the core feature has no parent ply group (no support surface to project on).

Symbolic texts size for the rosette axis and the core name respect the input scale factor (only available with the Advanced Front View command). In Drafting, when you modify the scale of a previously generated view containing symbolic texts, not all texts sizes take into account this factor scale. To synchronize texts sizes with the view scaling, select the Apply Scale check box in Text tab of the properties of the selected annotations.
 

Core Sample
 
Parameters Value Description
3D Label yes/no Determines whether the annotation at the CS point with the same text as the 3D label should be generated or not.
Table yes/no Determines whether a table with the list of plies at the CS point should be generated or not.
Table Column Plies Group Name yes/no Determines whether there should be a Plies Group column in the CS results table or not (Table must be set to yes).
Table Column Sequence Name yes/no Determines whether there should be a Sequence column in the CS results table or not (Table must be set to yes).
Table Column Entity Name yes/no Determines whether there should be an Entity Name column in the CS results table or not (Table must be set to yes).
Table Column Material ID yes/no Determines whether there should be a Material ID column in the CS results table or not (Table must be set to yes).
Table Column Material Name yes/no Determines whether there should be a Material Name column in the CS results table or not (Table must be set to yes).
Table Column Orientation Name yes/no Determines whether there should be an Orientation Name column in the CS results table or not (Table must be set to yes).
Table Column Orientation Value yes/no Determines whether there should be an Orientation Value column in the CS results table or not (Table must be set to yes).
Table Column Rosette yes/no Determines whether there should be a Rosette column in the CS results table or not (Table must be set to yes).
 

Stacking
 
Parameters Value Description
Generative Context Table/3DView When set to Table, only the Stacking Table is visible.
Other geometry projections are omitted (provided you select only Stacking, and a plane to generate the drawing.
Table yes/no Determines whether there should be a table with stacking information.
Stacking Entity Level Plies Group/Sequence/Ply/Cut Piece Selects the entity level to display, as in Stacking Management
Column Plies Group yes/no Determines whether there should be a Plies Group column in the stacking table or not (Table must be set to yes).
Column Sequence yes/no Determines whether there should be a Sequence column in the stacking table or not (Table must be set to yes).
Column Ply yes/no Determines whether there should be a Ply column in the stacking table or not (Table must be set to yes).
Column Cut Piece yes/no Determines whether there should be a Cut Piece column in the stacking table or not (Table must be set to yes).
Column Material ID yes/no Determines whether there should be a Material ID column in the stacking table or not (Table must be set to yes).
Column Material Name yes/no Determines whether there should be a Material Name column in the stacking table or not (Table must be set to yes).
Column Orientation Name yes/no Determines whether there should be a Orientation Name column in the stacking table or not (Table must be set to yes).
Column Orientation Value yes/no Determines whether there should be a Orientation Value column in the stacking table or not (Table must be set to yes).
Column Rosette yes/no Determines whether there should be a Rosette column in the stacking table or not (Table must be set to yes).
Column Surface yes/no Determines whether there should be a Surface column in the stacking table or not (Table must be set to yes).
Column Draping yes/no Determines whether there should be a Draping column in the stacking table or not (Table must be set to yes).
Column Core Sample yes/no Determines whether there should be a Core sample column in the stacking table or not (Table must be set to yes).