 |
This section describes the Change View
Support dialog box, which appears when Change View Support...
is selected.
This dialog box contains controls for:
|
| |
|
| |
Support
|
 |
- Type
Defines the annotation view support type
By default, the type is View from Reference.
- Reference
Changes the reference support/3D viewpoint of the view.
- Isolated
Isolates the view from the geometry. In this case, you will then be
able to modify the geometry or the axis system without changing the
view definition.
- Invert normal
Inverts the view orientation. When the view annotation plane is
moved on an axis system, the Invert normal option is not
available because the view annotation plane takes by default the
axis system orientation.
 |
Irrelevant in axonometric view context. |
|
| |
Orientation
|
|
|
|
- Irrelevant in axonometric view context.
- Options defined in this section are not persistent in the
annotation view properties.
|
- Type
Defines the annotation view horizontal axis orientation.
The options in the Type combo box are as follows:
- Implicit: Lets the application choose the orientation
of the horizontal axis.
- X Axis: Orientates the horizontal axis according to
the X axis representation when possible.
- Y Axis: Orientates the horizontal axis according to
the Y axis representation when possible.
- Z Axis: Orientates the horizontal axis according to
the Z axis representation when possible.
- Parallel to line: Orientates the horizontal axis
according to a selected line when possible.
- Normal to surface: Orientates the vertical axis
according to the normal to a selected plane when possible.
- Reference
Displays the horizontal axis reference geometry.
Available only with Parallel to line and Normal to
surface orientation types.
- Angle
Defines the horizontal axis angle with reference geometry.
|
