Standard Properties

This reference describes the Standard properties concerning:
  • Annotation Set.
 
   
 

Presentation Standard

 
  When you change the standard through Tools > Options > Mechanical Design> Functional Tolerancing & Annotation> Tolerancing, the changes are not applied automatically to existing annotation sets.

To apply those changes to existing annotation sets, you must select the same standard in the properties of the annotation sets.
A standard change cannot be undone.

This properties tab is the same as the one in 2D Layout for 3D Design. Changes done in Functional Tolerancing & Annotation will affect 2D Layout for 3D Design, and vice-versa.
  By default, the standard is set to ISO.
 

Syntactic and Semantic Dimensioning & Tolerancing Standards
 
Displays the list of standards in use in the annotation set.
If the semantic standard (at the time of creation or standard switch) is ISO, below properties are displayed in the Standard tab.
 

Default Specification Operators for Size

Lets you specify the linear and angular size properties for ISO 14405 operators.
Select the required values from the Linear Size ISO 14405 and Angular Size ISO 14405 lists.
 

Default Specification Elements for Form Association

Lets you specify property from the ISO 1101 FC list.

 

Default Specification Elements for Toleranced Feature Filtering

  • All form, location, orientation and runout specifications: Lets you specify the form, location, orientation and runout specifications in the ISO 1101 TF box.
    You are unable to select this check box when any of the below check boxes is selected.
  • Form specifications: Lets you specify only the form specifications in the ISO 1101 TFF box.
  • Orientation specifications: Lets you specify only the orientation specifications in the ISO 1101 TFO box.
  • Location specifications: Lets you specify only the location specifications in the ISO 1101 TFL box.