The CATDUA V5 capabilities are to check structural data within a CATProduct, CATPart, CATDrawing, CATAnalysis, CATMaterial, CATProcess, and to clean (modify) the data structure.
This batch is useful in the following situations:
- Before recovering external data.
- Before starting a new V5 release.
- Broken links when opening products.
- Incidents when updating a component (e.g. sketch update).
- The Links window appears: some documents have been found but have no references.
- Performance problems when opening a product (because of lost links).
This section provides the exhaustive list of return codes that can be detected by the CATDUA V5 batch. To see the cleaner rules corresponding to any of these return codes, a license belonging to the domain of the return code is required. For a full description of each return code, refer to Table of Detected Return Codes.
Priority Levels
Priority Level Legend:
| (1) | Priority One Return Code: Cleaning action may lead to data deletion. |
| (2) | Priority Two Return Code: Cleaning action may lead to data modification (without deletion). |
| (3) | Priority Three Return Code: Unimportant error. Cleaning action with minor impact on data. |
| (*) | This symbol means that the rule is not executed on a document coming from a PDM system (ENOVIAVPM, ENOVIA LCA). |
Detected return codes
| Category | Code | Meaning | Cleaner Action |
|
DOC: linked document (container root) |
DOC_1 (2) |
Non typed document in a link | Types the document in the link |
| DOC_3 (2) | Missing links | Updates the link counter | |
| DOC_4 (3) | Ghost links | Updates the link counter | |
| DOC_5 (2) | Destroyed links | Re-builds the missing link | |
| DOC_6 (3) | Applicative containers are lost | Adds the empty stream | |
| DOC_8 (3) | Bad performance when opening a document due to an invalid link counter | Deletes the link that does not appear to the end user but exists in table of inter-document links and compacts the table | |
| DOC_9 (3) | The CATPart cannot be updated | Puts the data contained in all federators into one federator and deletes the empty federators | |
| DOC_10 (1) | Some applicative containers have the same user id | Merges all data found on all containers into a single container | |
| DOC_11 (3) | Link to a useless CATPart when running the File > Send To command in a CATPart | Deletes the meaningless repository containing no input or inputs that are no more pointed | |
| DOC_12 (1) | Cannot open a document | Delete the corrupted storages | |
| DOC_14 (1) | A document cannot be opened and there are some OSM ERRORS such as OSM_RE001 | If it is a section plane container or a CATCollabCont container, then it is physically removed from the document | |
| DOC_15 (3) | Selection/De-selection is very slow | Removes the empty and useless containers | |
| CAT: Catalog | CAT_0 (2) | A feature catalog has no name | Removes the link to this catalog |
| CCL: Component Catalog | CCL_0 (3) | The name of the description and of the keyword are different | Renames the description |
| CCL_1 (3) | The same chapter appears with a name in the specification tree and with another name in the definition list | Renames the chapter | |
| CCL_2 (3) | When a chapter's keyword is deleted, some internal data remain in descriptions | Removes the useless internal data | |
| CCL_4 (3) | The link between a description's keyword value and its chapter's keyword might be broken | Re-links the keyword value to its keyword | |
| CCL_5 (2) | Chapters cannot be viewed in the Catalog Editor | Creates the missing description pointing to the chapter under the root chapter | |
| CCL_6 (1) | Ghost link when running the File > Send To command | Deletes the corrupted feature with invalid reference on a startup | |
| CCL_7 (1) | A Part Family still exists even though all the descriptions have been deleted. The synchronization fails | Deletes the reference after deleting the last related description | |
| CCL_8 (1) | A family cannot be dragged and dropped. | Deletes the description of the family which points to its parent chapter | |
| CCL_9 (1) | When running the Edit >Links... command on catalogs where the Master Model has been isolated, the link with the Master Model is not displayed. | Repairs the Master Model's isolation. | |
| EXT: External Link | EXT_0 (3) | A link still exists to a pointing document due to an unused extension feature | Deletes the link, the document needs to be updated |
| EXT_1 (3) | A material is lost when opening a CATProduct | Merges all the data found on all extensions into a single container | |
| EXT_2 (3) | Ghost links when opening a CATProduct | The reference of an extension is not in the same document that the reference of its base feature (probably after a replace) | |
| HIE: Hierarchy | HIE_3 (3) | A product instance has too many sub-products | Deletes the extra sub-products and product instance is synchronized |
| HIE_5 (3) | A change of reference is made during save as operation when a private component cannot find its reference and error DOC_3 may reappears | Fixes Error DOC_3 completely | |
| HIE_6 (1) | The model cannot be updated. Some assembly data (constraints) are invalid | Deletes the invalid connection | |
| HIE_7 (1) | Ghost links when running the File > Send To command in a CATPart | Deletes all the ASM products instantiated in the PrtCont container of the CATPart | |
| HIE_8 (2) | None in phase 1, as other links are expected between the two documents so the File > Desk..., File > Send To, and Edit > Links... command behave as expected | Re-routes the links in error in the Local Reference structure (internal links) | |
| UPD: Update | UPD_0 (2) | The update cycle on the object is not visible/cannot be edited | Unsets the link to itself (break the cyclic dependency) |
| UPD_2 (2) | Update status propagation problem. Some data which should not be up-to-date are shown as up-to-date | Increments the feature's update stamp | |
| Category | Code | Meaning | Cleaner Action |
| BRK: Broken Object | BRK_0 (1) | Broken objects are not aggregated | Deletes the objects |
| BRK_1 (1) | A feature has lost its StartUp link but an orphan feature has a valid link to an instance reference | Retrieves the orphan feature | |
| LIF: Product Lifecycle | LIF_2 (3) | Some objects cannot be accessed from the root product | Deletes the objects |
| LIF_4 (3) (*) | Non removed objects still exist in the CATProdCont container | Deletes the objects | |
| LIF_7 (3) | Non removed connections still exist in the CATProdCont container | Deletes the objects | |
| LIF_8 (3) (*) | Non removed connectors still exist in the CATProdCont container | Deletes the objects | |
| LIF_9 (3) | Non removed product bag reps still exist in the CATProdCont container | Deletes the objects | |
| LIF_12 (3) | Ghost link to another document | Unsets the _ToProxy attribute | |
| LIF_13 (1) | Ghost link when running the File > Send To command | Deletes the internal object (proxy) with the invalid link | |
| AGG: Aggregation | AGG_1 (1) | An aggregated object does not know its aggregating object | Deletes the aggregation |
| AGG_2 (2) | Ghost links, the view cannot be deleted, the Copy > Paste command does not work | Updates the aggregation link | |
| AGG_3 (2) | A father-son link between an instance and the product is deleted, which prevents the destruction of the instance | Uses the CATSpecSetFather Spec service to reset the link | |
| AGG_4 (2) | A constraint is broken when making a product flexible. | Puts the connector is on the right product attribute, and instantiates it on all the referencing documents | |
| AGG_5 (1) | Ghost link when running the File > Send To command in a CATPart | Deletes the useless PUBLISHING features | |
| ATT: Rule Attribute | ATT_2 (2) | Unwanted modified status of the documents after an update | Deletes the erroneous internal attribute |
| ATT_3 (1) | An unused attribute (activrep) is valuated | Unsets the attribute | |
| ATT_4 (2) | The update stamp of the position attribute is incorrect | Updates the update stamp | |
| ATT_6 (2) | An external reference is up-to-date whereas its target has changed | Sets the link as not up-to-date and initializes the time stamp list | |
| ATT_11 (1) | Ghost link when running the File > Send To command | Deletes the overloaded attribute in the Product instance | |
| ATT_12 (2) | Synchronization problem of an external parameter pointing to a parameter publication | Keeps only one pointing attribute valuated, with priority given to the resolved one | |
| ATT_13 (2) | An External Reference is seen as synchronized whereas the referenced geometry has changed | Makes the connector as not up-to-date then updates it | |
| ATT_14 (2) | A CATPart is seen as modified after being inserted in a CATProduct | When UPD_2 cleaning is done, an additional action is needed on the connectors: the synchronization status is reset to force their update | |
| UAQ: Product structure - Unexpected Attribute Quality | UAQ_1 (3) | The quality on a publication instance is different from the publication startup | Changes the quality from "neutral" to "in" |
| UAV: Product structure - Unexpected Attribute Value | UAV_0 (2) | Illegal position attribute | Sets the position matrix to the nearest isometric matrix if found, or to identity |
| UAV_1 (1) | Incorrect overloading of a position attribute | Switches to flexible products | |
| UAV_2 (3) | A connector points to an invalid object | Sets the link correctly | |
| UAV_3 (1) | A constraint is not in the right container | Deletes the constraint | |
| UAV_4 (3) | There are blanks in the component's list | Deletes the blanks | |
| UAV_5 (2) | A connection instance and a reference point have different connectors (by publication) | Synchronizes the connection | |
| UAV_6 (3) | A connection points to an invalid object | Synchronizes the connection | |
| UAV_7 (2) | A Product instance has an overloaded contextuality | Synchronizes the Product instance | |
| UAV_8 (2) | A product has many representations (no visualization when opening it) | Synchronizes the Product instance | |
| UAV_9 (3) | A connector has incorrect connections | Deletes the incorrect connections | |
| UAV_10 (3) (*) | A part document poins to useless components | Empties the _component attribute | |
| UAV_11 (3) | The Shape Connector attribute of the connector points to an invalid document | Resets the Shape Connector attribute | |
| UAV_12 (3) (*) | The _TechnoLinkAttr attribute is wrong | Resets the _TechnoLinkAttr attribute | |
| UAV_14 (3) | The same publication appears several times in the specification tree | Removes all the duplicate publications but one | |
| UAV_15 (2) (*) | The PUBLISHING_Pointage, PUBLISHING_Etiquette and/or PUBLISHING_PubName attributes are affected to the instance instead of the reference | Transfers the PUBLISHING_Pointage, PUBLISHING_Etiquette and PUBLISHING_PubName attributes from the instance level to the reference level | |
| UAV_16 (2) | The instance externals are locally set | Resets the instance externals | |
| UAV_18 (2) (*) | No shape representation for a part reference, or the shape representation of a reference points to another part shape | Makes the shape representation point to the own part shape | |
| UAV_19 (2) (*) | A contextual link stays as not up-to-date even after an update | Unsets the contextual link | |
| UAV_21 (1) | Discrepancy between the number of part publications in the assembly and the number of publications when opening the part separately | Resets the corrupted list of publications according to the value of this reference | |
| UAV_22 (1) | Error when performing an update | Deletes the invalid reference connection | |
| UAV_23 (2) (*) | A publication is wrongly seen as up-to-date | Updates the time stamp of the parameter if the publication points to a parameter | |
| UAV_27 (2) | Impossible to select a publication under a Product instance | Runs a SmartSynchro from the publication reference and restores the association | |
| UAV_29 (2) | Publications pointing a parameter are no longer resolved | Re-evaluates the publications using an old protocol with the new one | |
| UAV_30 (1) | Connections are lost in a product assembly that has been made flexible | Removes all the connection instances of the connections which reference has already been instantiated | |
| UAV_31 (2) | A contextual link is seen as connected (OK) in the "Define contextual Links " command whereas it is not possible to resolve it and to update the contextual geometry | Fixes the PRDCTXINPUT feature so that it points to the same context (i.e. the Product instance) as the one pointed to by its PRDCTXREPO | |
| UAV_32 (2) | When a parameter value is changed, the publication may show a wrong update status and may be seen as up-to-date | Sets the time stamp of the parameter under the publication attribute (_ModifiersTS) if the publication points to a parameter | |
| UAV_33 (2) | Some publications cannot be removed. No action is possible on such publications | Deletes the useless publications | |
| UAV_34 (2) | Part Number conflict in the assembly | Automatically detects the Part Number conflict and renames objects accordingly | |
| Problem with Instance’s feature unique identifier(UUID) | When there are product assembly parts with same UUID's, an error message appears informing the same.You can manually fix them by recreating the Instance using Replace or Insert operations. | ||
| UAV_35 (2) | When inserting a part in product, the part is transferred to the No Show space | Resets the Show attribute to CATShowAttr and the part is modified | |
| UPG: Upgrade | UPG_0 (3) | Invalid multi-representation (V5R2 model) | Cleans the multi-representation |
| UPG_1 (3) (*) | After reordering the publications or deleting a part, the publications reference a wrong geometry | Cleans this attribute by a new Spec relation without relative mode | |
| SYN: Synchronization | SYN_1 (3) | Multi-instantiation of a reference by the synchronization | Deletes/adds the feature |
| SYN_2 (1) | The PRDBAGREP attribute of the ASM product does not reference the PRDBAGREP of the reference ASM product | Resets the BagRepsList attribute of the ASM product | |
| HIE: Hierarchy | HIE_4 (1) | An internal object (connector) has an inconsistent state and keeps an instance-reference link to a useless document | Removes the connector |
| NUM: Numbering | NUM_0 (3) | A warning is displayed when opening a CATProduct | Removes the phantom numbering |
| Category | Code | Meaning | Cleaner Action |
|
BST: BackUp Start Up |
BST_1 (3) | The BackUp StartUp is not declared in the CAA mechanical feature | Declares the BackUp StartUp |
| LIF: Product Lifecycle | LIF_1 (1) | The size of the CATPart is abnormally huge compared to the number of elements and unused elements (Geometrical feature) | Deletes the unused elements, the part is the same but smaller. The removal of unused elements might help to remove ghost links |
| LIF_3 (3) | No visibility except the size of the CATProduct (when removing constraints) | Deletes the unused elements, the document is the same but smaller | |
| LIF_5 (3) | Non referenced elements in the CATSelSetsCont container | Deletes the elements | |
| LIF_10 (3) | Non pointed or useless proxy objects | Deletes the useless proxy objects | |
| LIF_11 (3) | An internal object is unused in the applicative container | Deletes the useless object | |
| LIF_20 (1) | Ghost link when running the File > Send To > Directory command which prevents the drawing release system to run. Drawings are the customer's final product. | Deletes human features if no aggregating manikin can be found. | |
| LIF_21 (2) | Ghost link when running the File > Send To command. | Aggregates the Delete_To connector under the Connectors family and synchronizes it so that it points to the correct document | |
| MMR: Mechanical Modeler | MMR_0 (1) | The 3 reference planes are corrupted | Restores valid reference planes |
| MMR_1 (2) | A Shape representation is not pointed to by a product | Resets the link | |
| MMR_2 (2) | No Main tool in the part | Creates a default Main tool | |
| MMR_4 (2) | Wrong visualization behavior and unexpected restrictions occur when trying to move an instance elsewhere in the part | Reorders or creates the missing set under the part | |
| MMR_5 (2) | No In Work object in the tree or incorrect visualization | Sets the part body as In Work object | |
| MMR_6 (3) | The standard for layers and layer filters is not available in the CATPart document | Creates the standard for layers and layer filters | |
| MMR_8 (2) | Some datum features contain wrong data that prevents the save operation in ENOVIA | Data of those datum features are modified to be managed correctly. | |
| The V5 part cannot be imported in 3DExperience through FBDI. A pointed document is erroneously referenced and is not visible in Edit > Links or File > Desk. | The document can be imported using FBDI or DBDI tools. | ||
| MMV | MMV_1 (3) | Invalid graphic property on the part | Deletes the invalid property |
| MMV_2 (3) | An invalid graphic property remains in the model even after a removal | Restores correctly the dress-up properties | |
| MMV_3 (3) | Wrong attribute values on the part body of a CATPart created in V5R10 | Deletes the wrong attribute names | |
| MMV_6 (3) | |||
| MGN: Mechanical Generic Naming (topology) | MGN_0 (2) | There is more than one topological result | Deletes the extra results |
| MGN_3 (2) | The feature has an invalid update state | Restores a valid state | |
| MGN_4 (3) | The generic naming of the BRep features creates duplicated data | Removes the duplicated data | |
| MGN_5 (3) | The feature keeps useless synchronization data | Removes the useless synchronization data | |
| MGN_6 (1) | The size of a CATPart on disk is abnormally huge | Removes the useless Mechanical Modeler data | |
| MGN_7 (2) | Some cells in a datum feature cannot be selected | Adds a naming to the cells | |
| MGN_8 (1) | Setting applicative attributes and colors using a dedicated CAA interface takes too much time | Deletes the invalid BRep features for colors and applicative attributes | |
| MGN_9 (1) | The CATDUA V5 (LIF_1) deletes a publication in the part or in a non aggregated BRep feature | Deletes the invalid BRep feature and re-plugs the publication to the equivalent BRep access | |
| MGN_10 (3) | Bad performances when updating part containing big import features | Deletes the useless data | |
| MGN_11 (2) | Some BRep features on an axis, a plane and an extremity created before R11 may be in update error but no error is generated. Thus, they are pointing to a no more existing geometry | Puts the BRep feature in a not updated state. The update will generate an update error which will allow the correction of the BRep feature | |
| MGN_12 (3) | The document size is too big | Compresses the BRep feature to minimize the size | |
| MGN_13 (2) | Some BRep features are in error | Tries to retrieve the lost specification. | |
| MGN_14 (3) | The import feature has wrong data. | Update the document after the manual modifications. | |
| MGN_17 (2) |
Stream of CATPart used a short (16
bits) for a particular information until CATIAV5R19 included,
which leads to problems with very large models. This information
is streamed on an integer (32 bits) since CATIAV5R20. Very large models, older than CATIAV5R20 and containing big feature, with more than 65536 faces gets incoherent information. |
Some features could be as
non-updated. The document needs to be updated. |
|
| MGN_18 (2) | Some features BRep have wrong internal orientation. |
An update is necessary. The document needs to be updated. |
|
| MTR: Mechanical Tools | MTR_0 (2) | The tool's result is not correctly plugged | Plugs the result |
| MTR_1 (3) | The body's reference is lot | Sets the reference to Start-Up | |
| MTR_2 (2) | Some Shape features are not correctly plugged | Re-plugs the Shape features | |
| MTR_3 (3) | The VisuOnOff attribute is not correctly valuated | Resets the attribute | |
| MFT: Shape Features Tools | MFT_0 (2) | The active/inactive status does not match the attribute structure | Resets the attribute |
| MFT_1 (1) | An inactive feature stores the result of the previous feature | Removes the result in the inactive feature | |
| MFT_2 (1) | The result of a Shape feature is valuated with the result of the previously active feature | Regenerates the result | |
| MFT_3 (1) | The attribute of an inactive Shape feature is not saved or is not set | Regenerates or re-evaluates the attribute | |
| GST: Generative Surface Tool | GST_0 (2) | Unidentified object (broken icon) called Rolling Offset when opening a CATPart. The startup is lost for a GSM Rollng Offset | Re-plugs the startup |
| GSD: Generative Shape Design | GSD_0 (3) | Unused aggregated feature | Deletes the useless feature |
| GSD_1 (1) | The reference planes are set as datum or as independent specifications | Corrects the Visualization Graph attribute, aggregates the moved reference plane in the current Open Body and creates a new reference plane | |
| GSD_2 (2) | The orientation might be inverted when updating a CATPart | Modifies the axis system attribute with respect to the new algorithm | |
| GSD_4 (2) | Ghost link in the CATPart | Removes the link | |
| GSD_5 (1) | Corrupted CCP link | No cleaning action for this error | |
| CTX: Context | CTX_1 (3) (*) | A part has multiple contexts | Deletes the extra contexts |
| CST: Constraints | CST_1 (2) | Non-typed constraint | Types the constraint |
| CST_2 (2) | Wrong attribute quality | Modifies the quality | |
| CST_3 (1) | Some attributes on constraints are not valuated | Deletes the constraints | |
| CST_4 (1) | Ghost link in a CATDrawing because of an invalid "blocs" attribute in a constraint | Valuates the "blocs" attributes of the constraint | |
| SSS: selection Set | SSS_1 (3) | The Selective Loading of documents with a selection sets containing elements outside its scope can lead to an unexpected behavior | Not fixable |
| UDF: User Feature | UDF_0 (2) (*) | A user feature has an invalid input | Re-plugs the input |
| Category | Code | Meaning | Cleaner Action |
| ASD: Assembly Design (constraints) | ASD_0 (1) | The start up of constraint is not found | Loads the AsmCst.feat catalog |
| ASD_1 (1) | Isolated constraint | Deletes the constraint | |
| ASD_2 (1) | The constraint is not correctly stored | Deletes the constraint | |
| ASD_3 (2) | The constraint type is lost | Restores the constraint type | |
| ASD_4 (2) | Wrong attribute quality | Modifies the quality | |
| ASD_5 (1) | Inconsistency between the feature catalog in V5R12 GA and the catalog in upper versions or service packs | Deletes the corrupted Fix Together and replaces it by a new one | |
| ASD_6 (1) | A Fix Together has no parent | Deletes the corrupted Fix Together | |
| ASD_7 (2) | A constraint attribute is not correctly valuated | Sets a correct value for the attribute | |
| ASD_9 (3) | Constraints cannot be reordered because of unused sets | Deletes the unused sets of constraints | |
| ASD_10 (2) | Some constraints are displayed in the 3D window but not in the specification tree | Aggregation problem: the Connection does not know the ConstraintASM, but the ConstraintASM knows that the Connection is its parent | |
| ASD_11 (1) | Unusable constraints cannot be deleted | Deletes the corrupted constraints | |
| ASD_12 (3) | Some constraints are not visible in the specification tree | "under construction" | |
| ASD_13 (3) | The Save as Frozen (only one product) command does not work | Deletes the unexpected SVVersion and the CATSpecXMan attributes from the CATMechProdCont container | |
| AFI: Assembly Feature | AFI_1 (3) | An Assembly feature points to the wrong inputs | Corrects the wrong links |
| AFI_2 (2) | An instance of a Reuse Pattern feature points to a wrong document, probably because of a problem when synchronizing the feature | Unsets the pointing attribute on the instance | |
| AFI_3 (3) | Ghost links when running the File > Send To command in the CATProduct | Plugs the instance to the right reference and resets/synchronizes it |
| Category | Code | Meaning | Cleaner Action |
| SAF: Features (Spec view) | SAF_2 (2) | The feature has no explicit image | Creations an explicit image |
| SAF_3 (1) | The feature contains an invalid explicit data | Deletes the data | |
| SAF_4 (2) | Missing links between the mesh and the physical data attached to the mesh | Creates the appropriate links | |
| SAF_5 (2) | Some nodes have a wrong activity status | Corrects the status | |
| SAF_6 (2) | Missing feature in the assembly model | Creates the missing feature | |
| SAF_7 (2) | The model can be neither solved, nor saved | Detects the explicit entities with a duplicate tag number and corrects their tag number | |
| (2) | |||
| (2) |
| Category | Code | Meaning | Cleaner Action |
| SCS: Sketcher Constraint | SCS_0 (2) | The sketch solving result is not stable. Geometries can move when editing a sketch | Adds the missing Help parameter to the constraint |
| SCS_1 (2) | Ghost links on 2D constraints. The attributes of the 2D constraints reference external documents. | Removes the invalid reference to the pointed document | |
| SKT: Sketcher | SKT_0 (1) | The sketch has no father | Deletes the sketch |
| SKT_24 (3) | The Fsur of the _FtrList must be referenced | Deletes the Fsur | |
| SKT_25 (3) | Wrong sketch version | Changes the version | |
| SKT_26 (2) | Ghost link when opening a CATPart | Re-plugs the geometry with ghost links on their details/dittos in the CATDrawing to their startups in the current CATPart | |
| SKT_27 (2) | Some output features are badly aggregated | Replaces the output in the dedicated node of the sketch they belong to | |
| SKT_28 (2) | Sketches created on a partiular level might encounter problems when updating use edges. | Corrects the tolerance problem so that use edges are correctly updated after modifying the sketch. | |
| SMG: Solve Manager (Sketch object) | SMG_4 (2) | The ImportedGeom attribute size must be the same as the number of operators | Resizes the list |
| SMG_5 (2) | The ImportedGeom attribute has no operator | Revaluates the attribute | |
| SMG_6 (2) | Mismatched ImportedGeometry attribute | Revaluates the attribute | |
| SMG_9 (2) | Invalid number of constraints | Revaluates the attribute | |
| SMG_16 (2) | The Solve Manager is not impacted by the update | Sets the constraint attribute to neutral | |
| SMG_17 (2) | Invalid OutputGeoms attribute | Revaluates the attribute | |
| IGS: Imported Geometrical Set | IGS_0 (3) | Invalid phantom operator | Deletes the operator |
| SKS: Sketch Support | SKS_0 (2) | The absolute axis of a sketch or of a sub-element cannot be used to create a feature | Puts the absolute axis feature out of date |
| SKS_1 (2) | The update cycle is not detected | Changes the structure of the feature to detect the cycle | |
| SKS_2 (2) | O point, H and V vectors of the absolute axis of the sketch are missing from the specification tree and are not visualized | Recreates the missing elements of the absolute axis of the sketch | |
| SKS_3 (1) | Data can not be imported in 3DEXPERIENCE using FBDI. | Remove a non aggregated SketchSupport. | |
| CRV: Curve | CRV_0 (2) | End points are not found on the curve | Adds the missing end points |
| CRV_1 (3) | Wrong update result because the update propagation is wrong | Sets the feature attributes to sp_NEUTRAL instead of sp_IN | |
| CRV_2 (2) | Ghost link when running the File > Send To command | Sets the invalid "Start Point" attribute and "End Point" attribute with the new limit points | |
| CRV_3 (2) | Ghost link when running the File > Send To command | ||
| CRV_4 (2) | A circle visible on previous releases is now invisible in the current release | Forces the open curve to be closed | |
| CRV_5 (1) | An ellipse invisible in previous releases is now visible | Deletes the ellipse which was previously invisible |
| Category | Code | Meaning | Cleaner Action |
| MAT: Material | MAT_1 (1) | A part has more than on material container | Deletes the extra containers |
| MAT_2 (3) | The material container has orphan elements | Deletes the orphan elements | |
| MAT_3 (2) | A material is not correctly visualized | Reapplies the material. Note that this error might be impossible to fix if the material cannot be retrieved (for example, if the material is located in an inaccessible material catalog) | |
| MAT_4 (3) | Invalid material link | Deletes the link | |
| MAT_5 (2) | The material parameter contains incorrect data | Modifies the material parameter | |
| MAT_6 (2) | Ghost link in a material | Reroutes the link to a correct material link | |
| MAT_7 (3) | Ghost link when running the File > Send To command | A material is located in the wrong container (not the material container) and this may lead to ghost links. This material is unused and should be destroyed | |
| MAT_8 (2) | Ghost link when running the File > Send To command | Corrects the advanced materials |
| Category | Code | Meaning | Cleaner Action |
| ABM | ABM_0 (1) | A link to the Bill of Material exists even though the drawing is empty. This link is displayed when running Edit > Links even if the drawing is empty and it cannot be deleted. | Deletes the Bill of Material |
| DAS: Drafting Axis System | DAS_0 (1) | When running the File > Send To command, an unrelated document can be pointed to by a drawing | An object managing the view axis origin has an invalid link to a 3D document |
| DBA | DBA_0 (2) | Wrong link in a default feature | Deletes the link |
| DDU: Drafting Dress-up | DDU_0 (2) | A useless data (connector, 3D feature) references another document (CATPart) | Deletes the data and its links to other documents |
| DDU_1 (2) | A CATDrawing contains an invalid link to another drawing | Deletes the invalid link | |
| DDU_2 (1) | Ghost link in a CATDrawing | Deletes the axis lines, center lines or thread that are directly under the DrwCont container | |
| DOB: Drafting Operator Breakout | DOB_0 (1) | A CATDrawing with isolated views still has some links to 3D parts/product when running the File > Send To command | Deletes the link |
| DOP: Drafting Operator Projection | DOP_0 (1) | A CATDrawing with isolated views still has some links to 3D parts/product when running the File > Send To command | Deletes the link |
| DOS: Drafting Operator Section | DOS_0 (1) | An unrelated document can be pointed to by a CATDrawing | A section operator has an invalid link |
| DOS_1 (1) | A section operator is not aggregated | Deletes the object | |
| GME: Generative Modeler | GME_0 (1) | An unrelated document can be pointed to by a CATDrawing | Deletes the object |
| GME_1 (1) | An unrelated document can be pointed to by a CATDrawing | Deletes the invalid link | |
| DRW: Drawing | DRW_0 (1) (*) | The document contains more than one drawing | Deletes the unused drawings |
| DRW_1 (1) | Ghost links when running the Edit > Links... command, or the size of a CATPart is abnormally big | There is a DrwDrawing with external links in the CATPrtCont. It is not visible in the specification tree | |
| DWE: Generative Drafting | DWE_0 (1) | An object managing links between the views and the 3D document points to an unrelated document | Deletes the useless object |
| DWE_1 (3) | Discrepancy between the number of linked documents when running File > Desk... and when running File > Send To | Flags the view as not up-to-date and indicates that an update is required to perform the cleaning operation | |
| DWE_2 (3) | Discrepancy between the number of linked documents when running File > Desk... and when running File > Send To | Replaces the internal links pointing to ghost documents by up-to-date links pointed to by the generative view's links | |
| DWE_3 (3) | Discrepancy between the number of linked documents when running File > Desk... and when running File > Send To | Replaces the internal links pointing to ghost documents by up-to-date links pointed to by the generative view's links | |
| DWS: Drawing Sheet | DWS_0 (2) | The views are not correctly organized in the sheet | Reorders the views |
| DWS_1 (1) (*) | The sheet is corrupted | Deletes the sheet | |
| DWV: Drawing View | DWV_0 (1) (*) | The view is corrupted or not correctly aggregated | Deletes the view |
| DWV_1 (2) | A view is linked to another CATDrawing | Deletes the link | |
| DWV_2 (2) | Warning when opening a CATProduct | Unplugs the view's sub-components with ghost links from their ghost reference and re-plugs them to their startups in the current document | |
| DWV_3 (3) | The local transformations of geometries in views (e.g. translations, scaling, rotations, offset) do not work, usually when some 2D component instances have been exploded or exposed in the CATDrawing | The geometrical result of the axis component of a view has been lost | |
| DWV_4 (3) | The sketch support is in the No Show space | Puts the sketch support in the Show space and puts its axis elements in the No Show space | |
| DWV_5 (3) | Ghost links when running the File > Send To command in a CATDrawing | Removes the invalid link | |
| DWV_6 (3) | The size of the CATDrawing or the CATPart shows that some 2D Layout data is abnormally big | Removes the useless geometrical results from the CGM container data | |
| DWV_7 (1) | Circles visible in previous releases (V5R12) are now invisible, or ellipses invisible in previous eleases (V5R12) are now visible | Forces the open circles to be closed and deletes the ellipses in error. The circles are visible again | |
| DVM: Drawing View Make Up | DVM_0 (2) | Unused view make up | Deletes the view make up |
| DWR: Drawing Relation | DWR_0 (3) (*) | An incoherent relation has been detected | Deletes the useless DrwRelation |
| DWT: Drawing Pattern | DWT_1 (3) | A non aggregated pattern has been detected | Deletes the pattern |
| GDI | GDI_0 (1) | Discrepancy between the number of linked documents when running File > Desk... and when running File > Send To | Deletes the feature |
| GIE: Generated Item | GIE_0 (2) | Unused Generated Item | Deletes the Generated Item |
| DAF: Drawing Area Fill | DAF_0 (3) | The area fill has no profile | Deletes the area |
| DAF_1 (3) (*) | The area fill is not aggregated | Deletes the area | |
| DAF_2 (3) (*) | The area fill has a missing curve | Deletes the area | |
| DAF_3 (3) | The area fill has no pattern | Applies the default pattern | |
| DAF_4 (1) | A document contains area fills with ghost links to other documents | Deletes the area fills | |
| HLV: HLR View | HLV_0 (1) | A generative view is not aggregated | Deletes the object |
| HLV_1 (1) | The size of the CATDrawing is disproportioned compared to the data it contains | Deletes the non aggregated generative view | |
| HLV_2 (1) | Ghost link when running the File > Send To command | Deletes the link | |
| HLV_3 (1) | Ghost link when running the File > Send To command | Deletes the link | |
| HLV_4 (1) | Ghost link when running the File > Send To command | Deletes the link | |
| HLV_5 (3) | The associativity is lost for the definition of the breakout profile, section view profile, section-cut profile, auxiliary profile or for the modification of the graphic properties or, the removal of the Generated Items | No clean available. For the auxiliary view: edits the section cut and replaces the profile. For the breakout: removes and re-draws it | |
| STD: Standards | STD_0 (2) | Too many standards in the document | Deletes the unused standards |
| STD_1 (2) | The standard is not synchronized with the active sheet | Re-synchronizes the standards | |
| DET: Drawing Detail (2D component) | DET_0 (3) | A 2D component is not aggregated | Deletes the component |
| DET_1 (3) | A 2D component is not types through the interface | Deletes the component | |
| DET_2 (2) (*) | The reference of a 2D component instance is outside its document | Creates the reference in the same document and replaces the wrong reference | |
| DET_3 (1) | A 2D component instance has a too big or too small scale | Deletes the scale | |
| DET_4 (2) | Redundant local reference in the model | Redirects the instances of the redundant local reference to the correct one and removes the redundant local reference | |
| DET_6 (1) | Unpredictable behavior when using a drafting detail/ditto | Deletes the invalid 2D component instance | |
| DET_7 (2) | Invalid link when opening CATDrawing | Unplugs the view's sub-components with ghost links from their ghost reference and re-plugs them to their startups in the current document | |
| DET_8 (2) | Ghost links when running the File > Send To command in a CATDrawing containing 2D component instances | Modifies the link so that it points to the correct internal object | |
| OLE: OLE Object | OLE_0 (2) (*) | The OLE object points to an invalid CATDrawing | Replaces the OLE object by a new one |
| OLE_1 (1) | Ghost links when running the File > Send To command | Removes the useless OLE feature | |
| DWG: Generative Dimension | DWG_0 (1) | The object managing the dimension generation is no more used | Deletes the generative dimension |
| DWG_1 (3) | The object managing the dimension generation is not aggregated | Deletes the generative dimension | |
| DWC: Callout | DWC_1 (3) | The callout is not aggregated | Deletes the callout |
| DWC_2 (2) | The callout arrows are visible even though the show attribute is set to CATNoShowAttr | Resets the show attribute to CATShowAttr | |
| DWA: Projected Axis | DWA_1 (3) | Object manufacturing cut views not aggregated | Deletes the projected axis |
| DWH: Generative Pattern | DWH_1 (3) | The generative pattern is not aggregated | Deletes the generative pattern |
| DWP: Pattern Mapping Table | DWP_0 (3) | The pointer for a pattern in 3D is no more used | Deletes the object |
| DWP_1 (1) | The pointer for a pattern in 3D is not aggregated | Deletes the object | |
| DAO | DAO_0 (3) | Associativity pointing to an external link with the document | Deletes the associativity |
| DAO_1 (3) | Ghost link due to a useless Drafting data referencing another document | Deletes the useless data and its link | |
| DAO_2 (2) | The extension line is not visible (or not correctly) when creating an extension line for the roughness | Takes the view scale into account for the extension line (overrun) | |
| PIC: Drawing Picture | PIC_0 (3) | Non aggregated picture | Deletes the picture |
| PIC_1 (2) | The reframe on is infinite when opening a CATDrawing | Modifies the picture position value (set at 0;0) and moves it to the No Show space | |
| VWN: View Name | VWN_0 (1) | Ghost links when running the File > Send To command | Deletes then rebuilds the formula to remove the external parameters |
| GPT: Generative Point | GPT_0 (1) | An unrelated document can be pointed to by a CATDrawing | Deletes the object |
| SAC | SAC_2 (1) | Ghost link when running the File > Send To command | Removes the Analysis connector containing the ghost link |
| LVW: Layout View | LVW_1 (2) | Ghost link when running the File > Send To command | Unsets the View Filter attribute of the 2D Layout view with an external link |
| LSC: Layout Section View | LSC_1(1) | An error message appears listing the presence of a ghost link. | Unset the link between the 2DL section and the 2DL filter. |
| DFM: Drafting Format | DFM_0 (2) | When opening a document created in a previous version, the format of some sheets is flipped | Computes and sets new values for the invalid attributes |
| LPR: L01 Product Profile | LPR_1 (1) | 2D Layout profiles are not updated when deleting a specific profile | Unsets the View Filter attribute of the 2D Layout view with an external link |
| DTA: Drafting | DTA_1(2) | Table in an instanciated 2D Component does not keep its orientation. The table gets instantiated but the orientation is kept horizontal. | The visualisation take into account the orientation of the table. |
| DTA_2(2) | When opening the pre-CATIAV5R15 CATDrawing on any CATIA level other than the Drawing creation level, the table (width) becomes bigger. | Restore valid value of margin. |
| Category | Code | Meaning | Cleaner Action |
| DST: Simple Text | DST_0 (1) | Invalid simple text | Deletes the text |
| DST_1 (1) | Ghost link in an old CATDrawing containing a section view | Removes the link but keeps the text as is | |
| DST_2 (1) | The number of annotations based on a simple text found by the search command is higher than the number of annotations based on a simple text seen by the user | Deletes each annotation based on a simple text which is not displayed in the view | |
| DST_3 (3) | The annotation is not correctly displayed | Modifies the annotation display to match the font size specification | |
| DCR: Connector | DCR_0 (2) | Connector problem | Retrieves the section specification in the related view |
| DCR_1 (3) | Obsolete internal element for associativity | Deletes the object | |
| DCR_2 (1) | Broken dimension or ghost link when running the File > Send To command in a CATPart | The information about the associative dress-up (dimension, annotation, constraint, etc.) for assembly positioning has been lost | |
| DCR_4 (3) | The CATdrawing is abnormally big | Deletes the useless elements | |
| DCR_5 (1) | When running the File > Send To command, a CATDrawing is linked to another CATDrawing | Deletes the link | |
| DCR_6 (1) | When running the File > Send To command, a CATDrawing is linked to another CATDrawing | Deletes the link | |
| DCR_7 (2) | Ghost link in a document pointing to a CATPart | Updates the link | |
| DCR_8 (2) | When copy/pasting some geometries with their associated dimensions, some dimensions are missing | Find the View missing connectors and add them to the View. | |
| DCS: Drafting Constraint | DCS_1 (2) | Constraints which are not correctly aggregated are not taken into account | Changes the place where the constraints are aggregated |
| DCS_2 (2) | A link to a 3D connector has not been deleted after being isolated. Some annotations are displayed with a wrong status and the wrong colors because of an internal corrupted object | Deletes each 3D connector that can be found in an interactive view. Fixes the link between the connector and the view aggregating the constraint | |
| DCT: Container | DCT_0 (1) | Data model in V4 format is useless but is still stored | Deletes the useless data |
| DCT_1 (2) | Bad display of fonts, diameter symbol or no visualization of the datum feature | Creates the missing feature for the annotations' visualization | |
| DCT_2 (1) | Ghost links when running the File > Send To command because of a non aggregated feature | Deletes the non aggregated feature | |
| DCT_3 (2) | Dimensions and annotations cannot be built in the 2D Layout or FTA workbench. Some objects are not correctly updated | Reinitializes the containers in error | |
| DCT_4 (3) | When opening a document, an error message indicates that the used font is not available even though this font is not used by any annotation | Removes the reference to the font from the document | |
| DCT_5 (2) | Impossible to use new fonts on dimensions | Removes the unused fonts from the list and adds a space in the list if needed | |
| DDI: Dimension | DDI_0 (2) | An invalid dimension points to data | Deletes the dimension |
| DDI_1 (1) | A dimension points to another document | Deletes the dimension | |
| DDI_2 (1) (*) | A constraint data is corrupted | Deletes the dimension | |
| DDI_3 (3) | Non aggregated dimension | Deletes the dimension | |
| DDI_4 (2) | The dimension display does not match the dimension properties | Updates the dimension properties | |
| DDI_5 (1) | The number of dimension found by the search command is higher than the number of dimension that are displayed | Deletes each dimension which is not displayed in the view | |
| DDI_6 (1) | Ghost link when running the File > Send To command | Deletes the external link | |
| DDI_7 (1) | Ghost link when running the File > Send To command | Deletes the external link | |
| DDI_8 (1) | Error when opening a CATDrawing | Deletes the invalid link | |
| DDI_9 (1) | Error when opening a CATDrawing | Deletes the invalid link | |
| DDI_10 (2) | Some radius dimensions are not correctly displayed | Sets the invalid symbol mode to Automatic | |
| DDI_11 (2) | The dimension text does not use the right font | Rebuilds the dimension visualization | |
| DDI_13 (2) | The dimension model defines some extension line interruptions which are not displayed | Rebuilds the dimension in error so that they are displayed | |
| DDI_14 (2) | Parts of the dimension line are wrongly displayed | Fixes the standard. | |
| DDI_15 (2) | The dimension position's value changes after an update | Builds the dimension so that the position does not change anymore | |
| DAC: Drawing Area cotation | DAC_0 (1) | Invalid dimension line | Removes the dimension |
| DAC_1 (1) | The number of graphical dimensions found by the search command is higher than the number of graphical dimensions displayed | Removes each graphical dimension which is not displayed in the view | |
| DAC_2 (1) | The annotation is not displayed in the drawing but when printed, it is displayed with a height equal to 10 | Removes the annotation | |
| DAC_4 (2) | Changing the standard through Page Setup reverses the Roughness symbol | Restores a correct orientation link | |
| DCH | DCH_0 (1) | A constraint refers to an invalid 3D connector | Removes the constraint |
| DCH_1 (2) | A constraint has invalid elements | Fixes the constraint | |
| DCH_2 (2) (*) | When running the File > Send To command, an isolated view is still linked to its part | Removes each hybrid constraints which can be found in the interactive view | |
| DTE | DTE_0 (3) | An internal drafting data erroneously references another document | Removes the link |
| DTE_1 (2) | Ghost link when running the File > Send To command | Unsets the link | |
| DTE_2 (2) | A text with a position link to another text is not up-to-date after canceling the text edition of the reference, or the text leader with a positional link to a 2D line points to another element | Updates the position link to get the correct position |
| Category | Code | Meaning | Cleaner Action |
| FTA: Functional Tolerancing & Annotation | FTA_1 (1) (*) | Some features in the TTRS (Technologically and Topologically Related Surface) container are not valid. The TTRS features become invalid because their start up has been removed from the container | Removes the invalid TTRS features |
| FTA_2 (3) | Some RGE (Reference Geometrical Elements) features are not used by any 3D annotations. | Removes the unused RGE features | |
| FTA_3 (3) | Some TTRS features are not used by any 3D annotations. | Removes the unused TTRS features | |
| FTA_4 (3) | When deleting FTA annotations, all Drafting internal entities are not deleted | Removes all Drafting annotations which are not pointed by a FTA one. | |
| FTA_5 (1) | Ghost link problem when opening a document | Removes the non aggregated 3D annotations | |
| FTA_6 (1) | Some FTA dimension features are abnormally located in the annotation set | Removes the invalid drafting annotations and recreates the new topology | |
| FTA_7 (3) | Redundant geometrical element in a user surface | Not fixable. Needs a manual correction | |
| FTA_8 (2) | A problem occurs during the CG thread status computation | Modifies the feature attribute's value | |
| FTA_9 (3) | he FTA geometrical tolerance has an invalid status when its 3D display is not consistent with its semantic attribute | Non fixable error | |
| FTA_10 (3) | The TTRS object used by the corrupted view comes from a different document. Data filtering of the document is be possible | Creates a new correct TTRS feature on the axis system and sets it to the corresponding view | |
| FTA_11 (2) | When running the File > Send To command, there is an extra empty line among the documents to process | Resets the invalid sequence | |
| FTA_12 (3) | No 3D annotation view has been found for a 3D annotation | Creates a new FTA view and reroutes it to the FTA 3D annotation and the associated Drafting view | |
| FTA_13 (3) | When creating a new semantic datum target, the datum becomes invalid with the following diagnostic report \"target label unicity\" | Removes the inconsistent datum target without any semantic datum associated | |
| FTA_14 (3) | A visualization dimension is linked to several dimensions or annotations | Removes the invalid links between the visualization dimension and the linked dimensions | |
| FTA_15 (3) | Ghost links related to the FTA capture feature and pointing to non existing documents when running the File > Send To command | Removes all the invalid external links in the captures | |
| FTA_16 (3) | Ghost link related to the NOA feature appear even if the pointing document is deleted | Removes the invalid external link to the NOA feature. | |
| FTA_17 (3) | A NOA feature with a ditto created using CAA API CATINoa::SetDitto must be created on the drafting view of type Background View and not on the drafting view pointed to by the NOA feature. | Compares the ditto's drafting view with the one of the retrieved drafting view of type Background View then, if there is a discrepancy, transfers the ditto to the correct view. | |
| (3) | |||
| After View from 3D command, dimensions are not generated in drawing. | After View from 3D command, dimensions are generated in drawing. |
| Category | Code | Meaning | Cleaner Action |
| UPD: Update | UPD_1 (2) | Invalid update stamp | Sets the update to false |
| SHM: Sheet Metal | SHM_0 (2) | The element has no activity or no value | Fixes the activity |
| SHM_1 (2) | Internal BRep Edges features are pointed but not aggregated | Aggregates the involved BRep Edge features | |
| SHM_2 (2) | Some functionality like Cutout, Hole, etc. fail | Changes the invalid cylindrical transformation to a valid one | |
| SHM_4 (2) | Some Sheet Metal feature have a wrong link to Sheet Metal parameters | Restores the link between the Sheet Metal feature and the Sheet Metal parameters |
| Category | Code | Meaning | Cleaner Action |
| MFG: Manufacturing | MFG_0 (1) | The machining feature is not referenced by any activity; the unused machining feature is not deleted (activities cases) | Deletes the unused machining feature |
| MFG_1 (1) | The pattern definition is not referenced by any pattern usage; the unused pattern definition is not deleted (pattern cases) | Deletes the unused pattern definition | |
| MFG_2 (2) | The body referenced by a manufacturing geometry in SMART NC mode is duplicated | Deletes the duplicated body | |
| MFG_3 (1) | The tool path is not referenced by any activity | Deletes the unused tool path | |
| MFG_4 (2) | Ghost link when running the File > Send To command in a machining resource | Unsets the attribute on the machining resource | |
| DMR: Digital Manufacturing Review | DMR_1 (3) | References to not found files appear when running the File > Send To command | Considers Simulation Initial State objects as invalid if they point to objects that have been removed from the current document |
| Category | Code | Meaning | Cleaner Action |
| KWE: Knowledge | KWE_1 (1) | The Knowledge object is not aggregated; bad performance when opening a document and a URL points to a document through an invalid attribute type | Deletes the attribute. If the parameter is pointed to by a relation, adds the object to the parameter set; if the object is a relation, adds it to the relation set) |
| KWE_2 (1) | A Knowledge relation in a CATPrtCont points to other documents | Deletes the relation | |
| KWE_3 (2) | The output value of a relation is not consistent. After forcing the relation evaluation, its value changes | Forces the evaluation | |
| KWE_4 (2) | A Knowledge check is broken. The "!" information is displayed and an error in the stream leads to an incorrect link in the check attributes | Restores the links correctly | |
| KWE_5 (2) | A parameter external reference is synchronized with a wrong value | Updates the value with the good one | |
| KWE_8 (3) | Ghost link between a parameter and a product when running the File > Send To command | Modifies the parameter by removing the invalid link | |
| KWE_1 (1) | Ghost link between a relation set and a parameter when running the File > Send To command | Removes instantiated relations from the relation set | |
| URL_1 (3) (*) | Bad performance when opening a document and a URL points to a document through an invalid attribute type | Corrects the attribute type |
| Category | Code | Meaning | Cleaner Action |
| JNT: Joint | JNT_1 (1) | One or several kinematics joint axes are corrupted | Deletes the corrupted joint |
| JNT_2 (1) | One or several geometries pointed to by a kinematics joint are corrupted | Deletes the corrupted joint | |
| JNT_3 (1) | There are several mechanism containers in the same CATProduct | Deletes all the mechanism containers except the first non empty one | |
| JNT_4 (2) | The constraints associated to the joints of a mechanism are broken | Replaces the incorrect pointed geometric element by a correct one | |
| JNT_5 (2) | A "Point on Curve" joint simulation is not correct | Updates the internal frames of the joint |
| Category | Code | Meaning | Cleaner Action |
| GNL: Generic Naming Link | GNL_1 (3) | The BRep feature points to a ghost document | Deletes the link |
| GNL_3 (3) (*) | BrpRsur, BrpWire, etc. are not aggregated | Deletes BrpRsur, BrpWire, etc. |
| Category | Code | Meaning | Cleaner Action |
| FGM: Fat Geometry | FGM_1 (3) | The size of the part is abnormally huge as compared to the number of elements. Some vertices have unnecessary geometrical data (linked curves/surfaces and some surfaces are unnecessarily extrapolated). | Removes the unnecessary geometrical data. The part is the same but with a smaller size. |
If you update the CATPart, this error may re-appear again (after the cleaning rule). If unextrapolated elements are finally extrapolated, the shape of extrapolation can be different from the original one: the extrapolated part of the element has been "cleaned", and the extrapolation can be different depending on the algorithm that generates it.
| Category | Code | Meaning | Cleaner Action |
| LIF: Product Lifecycle | LIF_6 (1) (*) | Some dimension are CATSpecObject_Broken | Deletes the dimension and the measure |
| LIF_15 (1) | Ghost link due to an invalid measure when running the File > Send To command | Removes the input selection of the measure | |
| LIF_16 (2) | Ghost link due to an invalid measure inertia when running the File > Send To command | Unsets the attribute selection of the measure inertia |
| Category | Code | Meaning | Cleaner Action |
| BOL: Boolean | BOL_0 (2) | Visualization problem due to a Boolean between a solid body (old) and a hybrid body (new) | Moves the invalid operand body under the part |
| BOL_1 (2) | Visualization problems due to a Boolean between two hybrid bodies (new) | Moves the invalid operand body under the part | |
| BOL_2 (2) | The solid body containing a Boolean feature is not processed when the part to part data filtering is done | Deactivates then re-activates the invalid Boolean feature | |
| CPF: Part Design Feature | CPF_0 (3) | The size of a CATPart is abnormally huge compared to the number of elements | Deletes the unreferenced BRep features |
| DRF: Draft | DRF_0 (3) | Faces to draft, fix aggregation of Brep Features | Removes the Rsur Features from CGMBody to PartBody |
| DRF_1 (3) | The default pulling direction is not compatible in the object and the vector | Resets the pulling direction in the object and the vector | |
| DVB: Default Value Bags | DVB_0 (3) | An applicative design table cannot be deleted | A link to the design table is found even though no feature uses it |
| DVB_1 (3) | Ghost link in a CATPart when running the File > Send To command | Unsets the improper "Hole_StandardTable" attribute of DefaultValuesBag | |
| FIL: Fillet | FIL_0 (2) | When editing a filter, the following error message is displayed: "Internal error in mechanical modeler" | Moves the PointOnEdge (Fillet Radius object containing it) to the appropriate the ribbon |
| THD: Thread | THD_0 (3) | A link between a design table and the standard reference file is not broken | Breaks the link |
| THD_1 (3) | Changing the value of an external parameter does not update the Thread Description | Forces the value change of the external parameter | |
| MIR: Mirror | MIR_0 (2) | One or several reference elements kept in the Generative Tool for mirroring are lost | Creates again the reference elements kept in the Generative Tool |
| PAT: Pattern | PAT_0 (1) | The document cannot be updated | Deletes the redundant instances in the Generative Tool of the user pattern |
| PAT_1 (2) | Some instances of the rectangular pattern are lost after modifying the parameters of the occurrence feature | Removes the incorrectly located instances and creates new instances at the right location regarding the pattern grid definition | |
| PAT_2 (2) | Selecting an edge/face of a circular pattern's instance (made of a user pattern) also selects the edge/face of another circular pattern's instance | Ignores the confusion point when naming the user pattern's instances. The circular pattern's instances are now correctly named | |
| PAT_3 (2) | The resulting geometry of the user pattern is not displayed. Only the reference appears in the geometry | Removes constraints with external geometry. Instances of the pattern are correctly located | |
| PAT_4 (2) | Some instances of the pattern are missing. | Corrects the feature's plug in-out. | |
| FMP: Functional Molded Part | FMP_1 (2) | The divide part body thickness is not updated when the body thickness is changed | Sets the shell dependency to match the divide |
| FMP_2 (2) | The sibling feature is not updated when the features parameters are changed | Makes the sibling flags consistent with the sibling pointer | |
| FMP_4 (2) | A functional feature using a "to-shell" length does not correct the track of the shell | Changes the reference to the correct shape | |
| FMP_5 (2) | A functional feature using a "to-shell" length does no correct the shell | Changes the reference to the correct shape | |
| FMP_6 (2) | A functional feature using a body thickness for its "wall" value is not updated when the body thickness is changed | Changes the reference to the correct parameter | |
| FMP_7 (2) | A feature that can be shelled does not change its "wall" direction when the part's shell properties (wall direction: inward/outward) are changed | Changes the reference to the correct parameter | |
| FMP_8 (2) | A functional modifier tries to modify the features of another part | Remove from the list the targets that are not in the same functional body | |
| FMP_9 (2) | Impossible to update a part using a force update and the part is corrupted | If necessary, creates the shell property feature with a zero wall thickness | |
| FMP_10 (2) | When modifying a limiting element, the functional fillet is not updated | Changes the attribute quality. The limiting element attribute is now set to SP_IN | |
| (2) | |||
| DEB: Delete Error Body | DEB_0 (2) | Ghost link when running the File > Send To command | Removes the following improper external attributes: "listErrorGeom1" and "listErrorGeom2" |
| PSM: Prisme | PSM_0 (2) | Ghost link when running the File > Send To command | Restores a valid symmetric relation between the first and the second limit of a prism |
| PSM_1 (2) | Ghost link when running the File > Send To command | Auto-numbering data reset. | |
| HOL: Hole | HOL_0 (1) | The rule created in V5R17 on the Hole's activity parameter does not work correctly | Copies the rule set on the parameter and sets the valid activity parameter. Deletes the invalid activity parameter |
| Category | Code | Meaning | Cleaner Action |
| BST: Backup Start Up | BST_0 (3) | The Backup Start Up is not declared in the Psp product | Declares the Backup Start Up |
| BDR | BDR_0 (3) | Invalid version of a 2D/3D modeling | Removes the direct pointing to the schematic functions |
| BDR_1 (3) | The File > Send To command shows a Ghost link. A pointed document is erroneously referenced in File > Send To and is not visible in Edit > Links or File > Desk. | Remove the part instance specific information for deleted part instance. | |
| CDC: Cross Document Connection | CDC_0 (1) | An error message is displayed if an invalid version of a cross document connection exists | Uses a publication to support the cross document connections |
| SCH: Schematic | SCH_0 (3) | The extension has a wrong update state | Sets the update state to TRUE |
| SCH_1 (3) | One of the extremity connectors of the route object (that is connected to itself) is not displayed | Finds all the branch connections that connect the connectors belonging to the same object. Removes these connections as well as any unconnected branch connections in a route | |
| SCH_2 (3) | An annotation in error "jumps" at first move during a direct manipulation | ||
| PSP: Plant Ship Modeler | PSP_0 (3) | You should not be able to set the Piping or Tubing specification attribute | Resets the value of the specification attribute |
| PSP_1 (2) | Some wire objects do not have any user defined attributes | Updates the cable wires with the missing user defined attributes | |
| PSP_2 (2) | When opening a CATProduct containing objects with a broken derived attributes link, a warning message recommends to run the CATDUA V5 | Resets the derived link for the derived attributes | |
| PSP_3 (1) | Ghost link when running the File > Send To command in a CATProduct | Removes the invalid builder connections | |
| Ghost link when running the File > Send To command in a CATProduct in a Run and its related objects (e.g. a Line ID) | Unsets the value of the old parameter which has the ghost link and removes it | ||
| PSP_4 (2) | Ghost link when running the File > Send To command in a Run and its related objects (e.g. Line ID) | Unsets the value of the old parameter which has the ghost link and removes it |
| Category | Code | Meaning | Cleaner Action |
| RSN: System Routing Segments an Nodes | RSN_0 (2) | Ghost link when running the File > Send To command | Recreates a new parameter and deletes the old one with the ghost link |
| RSN_1 (2) | Ghost link when running the File > Send To command | Recreates a new parameter and deletes the old one with the ghost link |
| Category | Code | Meaning | Cleaner Action |
| FS4 | FS4_1 (3) | Some elements should not be in the container | Deletion the unwanted extension |
| Category | Code | Meaning | Cleaner Action |
| EHI: Electrical Harness Installation | EHI_1(3) | The flexible curve attributes are not correctly valuated | Sets the flexible curve attributes to a correct valueb |
| EHI_2 (2) | The display of the name of electrical harness features is given by the Reference Designator attribute value and is not NLS compatible | Unsets the Reference Designator attribute value for the ranch and bundle segments | |
| EHI_3 (2) (*) | The electrical knowledge formula is not visible | Recreates all the electrical formulas under the geometrical bundle with the correct formulas | |
| EHI_4 (1) | Bundle segments lead to an incorrect configuration if the minimum bend radius is smaller than the diameter. | The Rib geometrical feature does not behave in a standard way | |
| EHI_5 (2) | The branch point positions are not coherent when editing the branch | Reconnects the bundle segment extremities to the right points | |
| EHI_6 (2) | When a bundle segment diameter attribute is changed, the document is not updated. | Fixes the broken relations between the Circle Radius and ElecDiameter | |
| EHI_7 (2) | Ribs or lofts are in a multibranchable but cannot be edited as branchable and cannot be seen as bundle segments in the branchable edition | Reconnects the bundle segment to right branchable | |
| EHI_8 (1) | A bundle segment is missing in the specification tree | Deletes the bundle segment | |
| EHI_9 (1) | When expanding the nodes of a multibranchable, a branchable does not have the node for a bundle segment. | Deletes the corrupted branchables | |
| EHI_10 (2) | Ghost link when running the File > Send To command in a CATProduct | Synchronizes the connector instance's attribute of "_Elec_GeoDefinition" (i.e. the value of the reference is reported on the instance) | |
| EHI_11 (2) | Error when adding or removing a branch point | Recreates correct links between the branchable and the mechanical features | |
| EHI_13 (2) | The segment extremity is highlighted at the wrong location when selecting a bundle segment, or the bundle segments are geometrically overlapped inside a branchable | Reconnects the segment extremities to the right geometrical points and updates the bundle segments. | |
| EDL: Electrical Device Librarian | EDL_1 (3) | The electrical part document is modified when instantiated from a catalog | Updates the electrical features in the part |
| EDL_2 (2) | When trying to replace a device connected to other electrical elements by another one, the links are broken | Publishes the unpublished connectors of an electrical connection point | |
| EDL_3 (3) | The positioning matrix of an internal splice inside a geometrical harness does not correspond to its 3D visualization | Calculates and sets the internal splice positioning matrix using the link established between the internal splice and the bundle segment with the defined offset value | |
| EDL_4 (2) | Ghost link when running the File > Send To command | Synchronizes the Electrical Device Connector instances' attribute of "_Elec_GeoDefinition" | |
| EDL_5 (2) | Certain types of electrical devices fail to get routed through | Creates a missing connector on all concerned Electrical Device references |
| Category | Code | Meaning | Cleaner Action |
| UFC: Unresolved Fitting Catalog | UFC_1 (2) | When running File > Send To > Directory in a CATProcess, there is an invalid link to a DMU Fitting file | Deletes the unwanted "Track" container |
| SHC: Shuttle Container | SHC_1 (3) | Performance issue when loading a CATPart | Deletes the unwanted "Track" container |
| TRC: Track Container | TRC_1 (3) | When running File > Send To > Directory in a CATPart, the name of an invalid CATProduct is displayed | Deletes the unwanted "Track" container |
| Category | Code | Meaning | Cleaner Action |
| IGP: IGriP | IGP_1 (1) | Non aggregated Tag Connectors created on a constraint definition are deleted by the CATDUA V5 when processing the LIF_8 error | Aggregates the floating Tag Connector with the Tag Group being its logical parent |
| IGP_3 (1) | Taglist node available directly to the product node is not valid. Some how customer has the data with the Taglist node available directly to the Product node. | Remove a Taglist available directly to the Product, and the TagGroup node is re-parented to the Product node. | |
| IGP_4 (1) |
The SendTo command fails with the following
message: "At least one file is not saved on a file system (probably loaded from a database)". |
Remove the additional robot task that is not visible. | |
| (1) |
| Category | Code | Meaning | Cleaner Action |
| TFC: Tooling Feature Corruption | TFC_0 (2) | When opening only a sub-product of a Tooling Assembly, some products that are not part of the loaded sub-product are also loaded | Resets the pointing attribute to the first rank instance of the product |
| TFC_1 (2) | A product takes a very long time to close | Removes the duplicated links | |
| TFC_2 (2) | When opening only a sub-product of a Tooling Assembly, some products that are not part of the loaded sub-product are also loaded | Resets to 0 all the attributes of the useless extensions (their complete removal is not possible) | |
| TFC_3 (2) | Copy/Paste operation fails | Resets the Part Container UserID to its default value CATPrtCont |
| Category | Code | Meaning | Cleaner Action |
| LIF | LIF_14 (3) | Ghost link when opening a CATProduct | Deletes the unused Body in White object |
| LIF_17 (3) | Ghost link when opening a CATProduct | Unsets the invalid attribute on the Automotive BiW Fastening feature | |
| LIF_18 (3) | Ghost link when opening a CATProduct | Unsets the invalid attribute on the Automotive BiW Fastening Joint Element feature instance | |
| BIW_0 (1) | The BIW Joint Body Definition Joined Contact Zones are not updated when the BIW Joint Definition is modified | Rebuilds the link between the BIW Joint Body and the BIW Joint |
| Category | Code | Meaning | Cleaner Action |
| CAM: Camera | CAM_2 (1) | Applicative cameras disappear and ghost links might appear when running the File > Send To command | Instantiates a new camera with the SpecObject_broken data |
| Category | Code | Meaning | Cleaner Action |
| SCE: Scene | SCE_0 (3) | Ghost links when running the File > Send To command | Deletes the useless scene feature |
| Category | Code | Meaning | Cleaner Action |
| TER: Technological Result | TER_0 (2) | The update status of the Technological Result node does not change when adding/modifying a feature in the body | Re-plugs the invalid TROutput to the last shape feature (or its ResultOut) of the tool in which it has been created |
| TER_4 (2) | The Technological results are missing under the mechanical tool | Updates the feature generating lacking technological results | |
| Category | Code | Meaning | Cleaner Action |
| PWC: Power Copy | PWC_0 (1) | Error in save process when a CATPart containing a Power Copy reference is imported in V6/3DEXPERIENCE, through FBDI. | Deletes all the Power Copies pointing to an external document |
| Category | Code | Meaning | Cleaner Action |
| SFM: SFM (Structure Functional Modeler) | SFM_1 (2) | The stiffener created via a Copy/Paste on a new plate is out of date when the original plate is modified | Replaces the link to the original plate by a link to the plate containing the corrupted stiffener |
| SFM_2 (2) | During the instantiation of the Beam on curve via a Power Copy, the support of the Beam is not replaced | Replaces the link to the selected curve by a link to the IntDisconnect | |
| SFM_3 (2) | Drawings are not generated for some stiffeners. | Enforces the parent category on the child category | |
| SFM_4 (2) | After running CATDUA, Geometrical sets are created corresponding to Internal faces of Profile used in Built-it Slot. Deleting these Geometrical sets impacts Slot's and corrupt the model. | There is no change in end user view. Document needs to be updated. |
| Category | Code | Meaning | Cleaner Action |
| PMD: Process Modeler | PMD_1 (3) | Some external resources (reference product) in a CATProcess may not be present in the resource context container | Removes the useless entries in the container and adds the needed entries extracted from the resource list |
| PMD_2 (3) | Some external product (reference product) in a CATProcess may not exist in the product context container. Moreover, certain entries in the container may have no corresponding instances in the PPR tree referring to them | Removes the useless entries in the container and adds the needed entries extracted from the product list to the container | |
| PMD_3 (3) | A warning message informs you that some feature files are missing | Removes the reference to the missing feature file | |
| PMD_4 (2) | Cutting, copying or pasting legacy activities of some simulation types may cause unexpected links to be displayed when running the Edit > Links... command | Re-assigns improperly assigned items to the right attributes | |
| PMD_5 (3) | When opening the process document, the user sees error regarding missing process catalog(s). | Links to missing process catalog(s) are removed from the process document. |
| Category | Code | Meaning | Cleaner Action |
| MEC | MEC_1 (1) | When opening a product containing a mechanism and when running File > Send To > Directory, extra components are displayed even if they are not in the model | Deletes the corrupted imported mechanism and imports it again from the reference mechanism. If the mechanisms is at root product level, it is deleted |
| Category | Code | Meaning | Cleaner Action |
| D5I | D5I_0 (3) |
Broken document link for a D5 part (DNBD5Part feature)
representation. Ghost link when running the File > Send To command. |
Removes the dangling shape representations. |