Sketcher Setting Repository

Sketcher

Role: Setting to manage the options of the Sketcher

Detailed role: Sketcher setting contains all options necessary to the commands of the Sketcher

The Sketcher repository has the following characteristics:

• Primary Tab Page: /Mechanical Design/Sketcher/Sketcher
• Repository File: Sketcher
• Version: 1
• Full Compatibility: 1
• Upward Compatibility: 1

Sketcher setting repository attributes:

• DYS_settings_AllowDistortions
  Role: Setting to allow distorsions in the grid
  Detailed role: Allows distorsions in the grid
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default there is no distorsotion in the grid
  • Values:

    0	There is no distorsotion in the grid
    1	The user can specify distorsion in the grid

• DYS_settings_AutoCreateDimConstraint
  Role: Setting to manage the automatic creation of geometrical constraints
  Detailed role: Automatically creates the dimensional constraints
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default automatic creation of constraints is deactivated
  • Values:

    0	There is no automatic creation of constraints
    1	Automatic creation of constraints is activated

• DYS_settings_AutoEditDimConstraint
  Role: Setting to manage the Automatic edition of created dimensional constraints
  Detailed role: Specifies whether the automatic edition of constraint is called or not after the creation of dimensionnelle constraint
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default the automatic edition od constraint is not called
  • Values:

    0	The edition of created constraint will not be automatically called
    1	The edition of created constraint will be automatically called

• DYS_settings_BackgroundSmartPick
  Role: Setting to manage the detection of logical constraints on background elements of the smart pick
  Detailed role: The smart pick detects dynamically logical constraints on background elements of sketch
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default there is no dynamic detection of background elements
  • Values:

    0	There is no dynamic detection of background elements
    1	The dynamic detection of background elements is activated

• DYS_settings_ColorConstructElts
  Role: Setting to manage the color of construction elements
  Detailed role: Specifies the color of construction elements
  
  • Type: unsigned integer
  • Default value: 9211020
  • Min value: 0
  • Max value: 16777215
• DYS_settings_ColorDefaultElts
  Role: Setting to manage the default color of the elements
  Detailed role: Specifies the default color of the elements
  
  • Type: unsigned integer
  • Default value: 16777215
  • Min value: 0
  • Max value: 16777215
• DYS_settings_ColorDiagNotChangedElts
  Role: Setting to manage the color of not changed elements
  Detailed role: Specifies the color of not changed elements
  
  • Type: unsigned integer
  • Default value: 8388608
  • Min value: 0
  • Max value: 16777215
• DYS_settings_ColorDiagNotConsistentElts
  Role: Setting to manage the color of not consistent elements
  Detailed role: Specifies the color of not consistent elements
  
  • Type: unsigned integer
  • Default value: 16711680
  • Min value: 0
  • Max value: 16777215
• DYS_settings_ColorDiagOverDefinedElts
  Role: Setting to manage the color of over constrained elements
  Detailed role: Specifies the color of over constrained elements
  
  • Type: unsigned integer
  • Default value: 16711935
  • Min value: 0
  • Max value: 16777215
• DYS_settings_ColorDiagWellDefinedElts
  Role: Setting to manage the color of iso-constrained elements
  Detailed role: Specifies the color of iso-constrained elements
  
  • Type: unsigned integer
  • Default value: 65280
  • Min value: 0
  • Max value: 16777215
• DYS_settings_ColorProtectedElts
  Role: Setting to manage the color of protected elements
  Detailed role: Specifies the color of protected elements
  
  • Type: unsigned integer
  • Default value: 16776960
  • Min value: 0
  • Max value: 16777215
• DYS_settings_ColorSmartPick
  Role: Setting to manage the color of the smart pick
  Detailed role: Specifies the color of the smart pick
  
  • Type: unsigned integer
  • Default value: 3981040
  • Min value: 0
  • Max value: 16777215
• DYS_settings_CpltCreateCstPosHorVertTo
  Role: Setting to manage the creation of geometrical constraints
  Detailed role: Creates the constraints detected using Autodetection and internal constraints
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the creation of constraints is activated
  • Values:

    0	There is no creation of constraints
    1	The creation of constraints is activated

• DYS_settings_CpltDirHorVert
  Role: Setting to manage the detection of horizontal or vertical lines by the smart pick
  Detailed role: The smart pick detects dynamically vertical or horizontal lines
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the dynamic detection is activated
  • Values:

    0	There is no dynamic detection
    1	The dynamic detection is activated

• DYS_settings_CpltDirParallel
  Role: Setting to manage the detection of parallelism by the smart pick
  Detailed role: The smart pick detects dynamically the parallelism between elements
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the dynamic detection is activated
  • Values:

    0	There is no dynamic detection
    1	The dynamic detection is activated

• DYS_settings_CpltDirPerpend
  Role: Setting to manage the detection of perpendicularity by the smart pick
  Detailed role: The smart pick detects dynamically the perpendicularity between elements
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the dynamic detection is activated
  • Values:

    0	There is no dynamic detection
    1	The dynamic detection is activated

• DYS_settings_CpltDirTangent
  Role: Setting to manage the detection of tangency by the smart pick
  Detailed role: The smart pick detects dynamically the tangency between elements
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the dynamic detection is activated
  • Values:

    0	There is no dynamic detection
    1	The dynamic detection is activated

• DYS_settings_CpltPosHorVertTo
  Role: Setting to manage the detection of alignments by the smart pick
  Detailed role: The smart pick detects dynamically the alignments between elements
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the dynamic detection is activated
  • Values:

    0	There is no dynamic detection
    1	The dynamic detection is activated

• DYS_settings_CpltPosSupport
  Role: Setting to manage the detection of the supports of circles and lines by the smart pick
  Detailed role: The smart pick detects dynamically the supports of circles and lines
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the dynamic detection is activated
  • Values:

    0	There is no dynamic detection
    1	The dynamic detection is activated

• DYS_settings_CreateCenter
  Role: Setting to manage the creation of center for ellipses and circles
  Detailed role: Creates circle and ellipse centers when creating circles and ellipses
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the creation of the centers is activated
  • Values:

    0	The creation of the centers is not activated
    1	The creation of the centers is activated

• DYS_settings_CstrGeomsToSketchRslt
  Role: Setting to enable construction geometries to sketch result
  Detailed role: Enables construction geometries to sketch result
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default does not enable construction geometries to sketch result
  • Values:

    0	Does not enable construction geometries to sketch result
    1	Enables construction geometries to sketch result

• DYS_settings_DiagElts
  Role: Setting to manage the visualization of the status of the constrained elements
  Detailed role: Specifies if the colors of the elements are the colors of the diagnostic
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the colors of the elements are the colors of the diagnostic
  • Values:

    0	The elements have their original colors
    1	The colors of the elements are the colors of the diagnostic

• DYS_settings_DragElts
  Role: Setting to manage the direct manipulation of elements
  Detailed role: Allows to drag the elements
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the elements can be directly dragged
  • Values:

    0	The elements cannot be directly manipulated
    1	The elements can be directly dragged

• DYS_settings_DragMode
  Role: Setting to manage the solve when dragging elements
  Detailed role: Allows to change the resolution mode of the solver when dragging elements
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the drag mode is the minimum move
  • Values:

    0	Standard mode Detailed role: Moves underconstrained geometry rigidly
    1	Minimum move Detailed role: Moves the smallest number of geometries
    2	Relaxation Detailed role: Solves using relaxation method

• DYS_settings_DragWithEndPts
  Role: Setting to manage the behavior of end points when dragging elements
  Detailed role: Specifies if the end points are dragged or not with the elements
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the end points are dragged with the elements
  • Values:

    0	The end points are not dragged with the elements
    1	The end points are dragged with the elements

• DYS_settings_GridAdaptative
  Role: Setting to activate adaptative grid
  Detailed role: Grid primary spacing along H and V is scaled to currently displayed viewpoint
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default grid is not adaptative
  • Values:

    0	Grid primary spacing doesn't adapt to viewpoint
    1	Grid adapts itself to viewpoint

• DYS_settings_GridDisplay
  Role: Setting to manage the display of the grid
  Detailed role: Displays a useful grid that guides you as you create your sketch.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the grid is displayed
  • Values:

    0	The grid will not be displayed
    1	The grid will be displayed

• DYS_settings_GridGround
  Role: Setting to manage the shade of the sketch plane
  Detailed role: Shades the sketch plane to view it when rotating it in the workbench
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default the sketch is not shaded
  • Values:

    0	The sketch will not be shaded when rotating
    1	The sketch will be shaded when rotating

• DYS_settings_GridHPrimarySpacing
  Role: Setting to manage the value of the horizontal spacing of the grid
  Detailed role: Specifies the horizontal spacing between major grid lines
  
  • Type: double
  • Default value: 100
  • Default Value Role: Value in millimeters
• DYS_settings_GridHSecondaryStep
  Role: Setting to manage the value of the horizontal graduation
  Detailed role: Specifies the number of steps in an horizontal spacing
  
  • Type: integer
  • Default value: 10
  • Min value: 1
  • Max value: 16777215
• DYS_settings_GridSnapPt
  Role: Setting to manage the snap on the grid
  Detailed role: Snaps the points you create to the nearest intersection points of the grid
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the snap to the grid is active
  • Values:

    0	The snap to the grid will not be active
    1	The snap to the grid will be active

• DYS_settings_GridVPrimarySpacing
  Role: Setting to manage the value of the vertical spacing of the grid
  Detailed role: Specifies the vertical spacing between major grid lines
  
  • Type: double
  • Default value: 100
  • Default Value Role: Value in millimeters
• DYS_settings_GridVSecondaryStep
  Role: Setting to manage the value of the vertical graduation
  Detailed role: Specifies the number of steps in an vertical spacing
  
  • Type: integer
  • Default value: 10
  • Min value: 1
  • Max value: 16777215
• DYS_settings_MscNormalToMinTransfo
  Role: Setting to position the sketch plane with minimal transformation
  Detailed role: Sets the sketch plane parallel to the screen with a minimal transformation
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default the viewpoint transformation applied when entering sketcher is not minimal
  • Values:

    0	The viewpoint transformation to set the sketch plane parallel to screen is not minimal
    1	The viewpoint transformation to set the sketch plane parallel to screen is minimal

• DYS_settings_MscNormalToView
  Role: Setting to position the sketch plane parallel to the screen
  Detailed role: Sets the sketch plane parallel to the screen
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the sketch plane is set parrallel to the screen
  • Values:

    0	The sketch plane is not set parrallel to the screen
    1	The sketch plane is set parrallel to the screen

• DYS_settings_ShowPosition
  Role: Setting to manage the display of the coordinates of the cursor in the tool bar
  Detailed role: Allows the user to display the coordinates of the cursor in the assistant tool bar
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the tool bar shows the coordinates
  • Values:

    0	The tool bar will not show the coordinates
    1	The tool bar will show the coordinates

• DYS_settings_ShowPositionOnCursor
  Role: Setting to manage the display of the coordinates of the assistant cursor in the 3D
  Detailed role: Allows the user to display the coordinates of the assistant cursor in the 3D
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the coordinates are displayed on the assistant
  • Values:

    0	The coordinates will not be displayed on the assistant
    1	The coordinates will be displayed on the assistant

• DYS_settings_SmartpickSnapMode
  Role: Setting to manage the snap mode of sketch's elements when creating or dragging an element with the Smartpick
  Detailed role: Allows to change the snap mode of Smartpick
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default the snap mode is done on the all visible elementse
  • Values:

    0	All visible elements Detailed role: Snaps on the all visibles sketch's elements
    1	Last flied over element Detailed role: Snaps on the last flied over element

• DYS_settings_UnderDefUpdateErr
  Role: Setting to manage the generation of update errors
  Detailed role: Specifies if an update error will be raised if the sketch is not fully-constrained
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default no update error is raised when the sketch is not fully-constrained
  • Values:

    0	No update error will be raised if the sketch is not fully-constrained
    1	An update error will be raised if the sketch is not fully-constrained

• DYS_settings_ValidateConstraint
  Role: Setting to manage the creation of dimensional constraint
  Detailed role: Creates the dimensional constraints by data entry of values
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the creation of constraints is activated
  • Values:

    0	There is no creation of constraints
    1	The creation of constraints is activated

Copyright © 1999-2019, Dassault Systèmes. All rights reserved.