ElectricalHarnessInstallation Setting Repository

ElectricalHarnessInstallation

Role: Define electrical harness management settings

Detailed role: Define electrical harness management settings

The ElectricalHarnessInstallation repository has the following characteristics:

• Primary Tab Page: /Equipment & Systems/Electrical Harness Installation/Harness Management
• Repository File: ElectricalHarnessInstallation
• Version: 1
• Full Compatibility: 1
• Upward Compatibility: 1

ElectricalHarnessInstallation setting repository attributes:

• AccuracyState
  Role: Setting to manage the balance between performance and accuracy
  Detailed role: Setting to manage the balance between performance and accuracy for the FLEX algorithm
  
  • Type: integer
  • Default value: 1
  • Min value: 1
  • Max value: 10
• AllowSystem
  Role: CheckButton to allow System to use a Min Bend Radius for Curve Computation
  Detailed role: Setting to allow System to use a Min Bend Radius for Curve Computation
  
  • Type: integer
  • Default value: 524288
  • Default Value Role: By default, do not allow the system to use a smaller bend radius value
  • Values:

    1	Allow the system to use a smaller bend radius value
    524288	Do not allow the system to use a smaller bend radius value

• AutoLinkState
  Role: Activate/Deactivate automatic link
  • Type: integer
  • Default value: 1
  • Values:

    0	Deactivate automatic link to new bundle segment
    1	Activate automatic link to new bundle segment

• AutoUnLinkState
  Role: Settings to remove geometrical link at unlink
  • Type: integer
  • Default value: 1
  • Values:

    0	Do not remove geometrical link at unlink
    1	Remove geometrical link at unlink

• AvoidWarningMessageRepetition
  Role: Check Button to avoid repetition of warning message when building curve
  Detailed role: Avoids repetition of warning message.i.e. when curve is broken OR when curve is built with dichotomy
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default the warning message is not avoided
  • Values:

    0	Don't avoid repetition of warning message
    1	Avoid repetition of warning message

• BNSCollapsed
  Role: Check Button to warn user when BundleSegment is collapsed
  Detailed role: Warns the user when BundleSegment is collapsed
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default user gets warning when BundleSegment is collapsed
  • Values:

    0	Dont Warn user when BundleSegment is collapsed
    1	Warn user when BundleSegment is collapsed

• BNSColorChange
  Role: Check Button to change color of BundleSegment as well
  Detailed role: Changes the color of BundleSegment as well
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default the color of BundleSegment does not change
  • Values:

    0	Will not Change the color of BundleSegment as well
    1	Will Changes the color of BundleSegment as well

• BNSColorToSet
  Role: Color to Set.
  • Type: unsigned integer
  • Default value: 0
  • Default Value Role: Red in RGB order
  • Min value: 0
  • Max value: 255
• CheckAtOpen
  Role: Allows the check of all the branches at the launch of the Check and Clean command
  Detailed role: Allows the check of all the branches at the launch of the Check and Clean command
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default there is no check of all the branches at the launch
  • Values:

    0	Do not check al the branches at the launch of the command
    1	Allows the check of all the branches

• ChoixAlgo
  Role: Setting to manage the algorithm used for branch routing
  Detailed role: Setting to manage the algorithm used for branch routing
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default the formal algorithm is used for the branch routing
  • Values:

    0	The standard algorithm is used for the branch routing
    1	The FLEX algorithm is used for the branch routing

• CombolinkoptionsState
  Role: Setting for keep link with selected object
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 2
  • Step: 1
• ContextualLinkCheckState
  Role: Setting to forbid selection outside current geometrical bundle
  • Type: integer
  • Default value: 0
  • Values:

    0	Do not forbid the selection outside current geometrical bundle
    1	Forbid the selection outside current geometrical bundle

• CurrentExtremityColor
  Role: Define bundle segment color
  • Type: unsigned integer
  • Default value: 255
  • Default Value Role: White in RGB order
  • Min value: 0
  • Max value: 255
• CurveNotElectrical
  Role: Check Button to warn user when Curve is not Electrical
  Detailed role: Warns the user when the Curve is not Electrical
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default user gets warning when Curve is not Electrical
  • Values:

    0	Dont Warn user when Curve is not Electrical
    1	Warn user when Curve is not Electrical

• DefaultNameState
  Role: Setting to manage bundle segment naming
  • Type: integer
  • Default value: 1
  • Values:

    1	Use bundle segment naming rule
    0	Use parent-bundle segment naming rule

• DirectoryCheckAndClean
  Role: Report Localization
  Detailed role: The directory for the generated report of the command Check and Clean
  
  • Type: string
  • Default value:
• FlexToStandard
  Role: Checks the option of curve build
  • Type: integer
  • Default value: 0
• GeometricLinkState
  Role: Activate/Deactivate geometrical link
  • Type: integer
  • Default value: 1
  • Values:

    0	Deactivate geometrical link between segments
    1	Activate geometrical link between segments

• HideInternal
  Role: Hide internal harness geometry
  • Type: integer
  • Default value: 1
  • Values:

    0	Do not hide internal harness geometry
    1	Hide internal harness geometry

• KeepCustomizedProdNameForGBNState
  Role: Use customised display for geometrical bundle naming rule
  • Type: integer
  • Default value: 0
  • Values:

    0	Do not use customized display for geometrical bundle nameing rule
    1	Use customized display for geometrical bundle nameing rule

• KeepNotUsedState
  Role: Setting to manage the unused branch points
  Detailed role: Setting to manage the unused branch points
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default an unused branch point is not deleted
  • Values:

    1	An unused branch point is not deleted
    0	An unused branch point is prompted for deletion

• LocalSlackState
  Role: Check Button to display labels for Local Slack
  Detailed role: Check Button to display labels for Local Slack
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default Labels should not be displayed
  • Values:

    0	Do not display the labels for Local Slack
    1	Display the labels for Local Slack

• MandatoryGBNState
  Role: Define if the geometrical bundle is mandatory
  Detailed role: Define if the geometrical bundle is mandatory
  
  • Type: integer
  • Default value: 1
  • Values:

    0	Geometrical bundle is not mandatory
    1	Geometrical bundle is mandatory

• NumberOfDocAssistanceState
  Role: Work with one multi-branchable per geometrical bundle
  • Type: integer
  • Default value: 0
  • Values:

    0	Do not work with one multi-branchable per geometrical bundle
    1	Work with one multi-branchable per geometrical bundle

• PointRepColorToSet
  Role: Define symbol color for points when adding local slack
  • Type: unsigned integer
  • Default value: 0
  • Default Value Role: Red in RGB order
  • Min value: 0
  • Max value: 255
• PointRepSymbolToSet
  Role: Define point representation of symbol used for points when adding local slack
  • Type: integer
  • Default value: 1
  • Default Value Role: Cross
  • Values:

    1	Cross
    2	Plus
    3	Circle
    4	Double Circle
    5	Dot
    6	Full Square
    7	Star
    8	Small Full Square
    9	Small Dot

• PointSymbolChkBtnState
  Role: Check Button to display specific symbol for points when adding local slack
  Detailed role: Displays specific symbol for points when adding local slack
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default specific symbol should not be displayed
  • Values:

    0	Do not use specific symbol for local slack display
    1	Use specific symbol for local slack display

• ProfileTypeState
  Role: Settings for bundle segment profile
  Detailed role: Choose 'Circular profile only', to work with circular section bundle segments only.
  Choose 'Any profile', to work with bundle segment sections of any type.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default, use circular profile only
  • Values:

    1	Use circular profile only
    2	Use any type of profile

• ProfileValueState
  Role: Settings for bundle segment profile
  Detailed role: Choose 'Circular profile only', to work with circular section bundle segments only.
  Choose 'Any profile', to work with bundle segment sections of any type.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default, keep the greatest value constant is set
  • Values:

    1	Keep the greatest value constant
    2	Keep the smallest value constant
    3	Keep the ratio constant
    4	Do not recompute values

• RatioCLMode
  Role: Setting to manage the accuracy of the final branch length in constrained length mode
  Detailed role: Setting to manage the accuracy of the final branch length in constrained length mode
  
  • Type: double
  • Default value: 1
  • Default Value Role: By default the tolerance is set to one percent
• SptPubVisuModeState
  Role: Settings to use publications to recognize adaptive supports
  Detailed role: This option will be used during selective loading and extract
  If you activate it, only support with publication 'ELEC-SPPORT-RADIUS' will be considered as adaptive.
  Its highly recommneded to use it because it will make you save time when loading large assemblies containing adaptive supports.
  
  • Type: integer
  • Default value: 1
  • Values:

    0	Do not use publications to recognize adaptive supports
    1	Use publications to recognize adaptive supports

• UserBendRadNotRespected
  Role: Check Button to warn user when User Bend Radius is not Respected
  Detailed role: Warns the user when User Bend Radius is not Respected
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default user gets warning when User Bend Radius is not Respected
  • Values:

    0	Dont Warn user when User Bend Radius is not Respected
    1	Warn user when User Bend Radius is not Respected

• UseSptInstParentName
  Role: Settings to add name of direct aggregating parent product or component into the geometries' names
  Detailed role: This option will add name of direct aggregating parent product or component into the geometries' names.
  
  • Type: integer
  • Default value: 1
  • Values:

    0	Do not add name of direct aggregating parent product or component into the geometries' names
    1	Add name of direct aggregating parent product or component into the geometries' names

• WarnOnBranchCollapse
  Role: Check Button to warn user when Branch collapses
  Detailed role: Warns the user when the Branch collapses i.e. BendRadius is less than Segment Radius
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default user gets a warning when Branch collapses
  • Values:

    0	Dont Warn user when Branch is collapsed
    1	Warn user when Branch is collapsed

Copyright © 1999-2019, Dassault Systèmes. All rights reserved.