DraftingOptions Setting Repository

DraftingOptions

Role: Manages drafting options

The DraftingOptions repository has the following characteristics:

• Primary Tab Page: /Mechanical Design/Drafting/General
• Repository File: DraftingOptions
• Version: 1
• Full Compatibility: 1
• Upward Compatibility: 1

DraftingOptions setting repository attributes:

• AfterCre
  Role: Display insert text after manipulators during creation
  Detailed role: Insert text after manipulator lets you easily insert a text after a dimension main value during creation.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• AfterMod
  Role: Display insert text after manipulators during modification
  Detailed role: Insert text after manipulator lets you easily insert a text after a dimension main value during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• BackgroundColorBlue
  Role: Blue constituent of sheet background color (for pre-V5R14 drawings)
  Detailed role: Defines the blue constituent of sheet background color (for pre-V5R14 drawings).
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: float
  • Default value: 1.0
  • Min value: 0.0
  • Max value: 1.0
• BackgroundColorBlueDitto
  Role: Blue constituent of 2D component sheet background color (for pre-V5R14 drawings)
  Detailed role: Defines the blue constituent of background color applied to a detail 2D component sheet (for pre-V5R14 drawings).
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: float
  • Default value: 1.0
  • Min value: 0.0
  • Max value: 1.0
• BackgroundColorGreen
  Role: Green constituent of sheet background color (for pre-V5R14 drawings)
  Detailed role: Defines the green constituent of sheet background color (for pre-V5R14 drawings).
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: float
  • Default value: 1.0
  • Min value: 0.0
  • Max value: 1.0
• BackgroundColorGreenDitto
  Role: Green constituent of 2D component sheet background color (for pre-V5R14 drawings)
  Detailed role: Defines the green constituent of background color applied to a detail 2D component sheet (for pre-V5R14 drawings).
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: float
  • Default value: 1.0
  • Min value: 0.0
  • Max value: 1.0
• BackgroundColorRed
  Role: Red constituent of sheet background color (for pre-V5R14 drawings)
  Detailed role: Defines the red constituent of sheet background color (for pre-V5R14 drawings).
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: float
  • Default value: 1.0
  • Min value: 0.0
  • Max value: 1.0
• BackgroundColorRedDitto
  Role: Red constituent of 2D component sheet background color (for pre-V5R14 drawings)
  Detailed role: Defines the red constituent of background color applied to a detail 2D component sheet (for pre-V5R14 drawings).
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: float
  • Default value: 1.0
  • Min value: 0.0
  • Max value: 1.0
• BackgroundViewToCopy
  Role: Defines whether the background view will be copied or not into the new sheet
  Detailed role: Defines whether the background view will be copied or not into the new sheet.
  
  • Tab Page: /Mechanical Design/Drafting/Layout
  • Type: boolean
  • Default value: 1
• BeforeCre
  Role: Display insert text before manipulators during creation
  Detailed role: Insert text before manipulator lets you easily insert a text before a dimension main value during creation.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• BeforeMod
  Role: Display insert text before manipulators during modification
  Detailed role: Insert text before manipulator lets you easily insert a text before a dimension main value during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• BlankingCre
  Role: Display modify blanking manipulators during creation
  Detailed role: Modify blanking manipulators let you modify interactively the blanking of each extension line during creation.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• BlankingMod
  Role: Display modify blanking manipulators during modification
  Detailed role: Modify blanking manipulators let you modify interactively the blanking of each extension line during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• BreakoutLinetype
  Role: Line type for breakout view
  Detailed role: Selects line type for breakout view.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: unsigned integer
  • Default value: 0
  • Min value: 0
  • Max value: 7
• BrokenLinetype
  Role: Line type for broken view
  Detailed role: Selects line type for broken view.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: unsigned integer
  • Default value: 4
  • Min value: 0
  • Max value: 7
• CATDrwAFAskForDelSupport
  Role: Ask for deletion of geometry support
  Detailed role: Asks for deletion of geometry support.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 1
• CATDrwAFOptimizationMode
  Role: Area Fill detection optimized for geometry
  Detailed role: Defines the tolerance mode allowed when creating an area fill profile.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: integer
  • Default value: 0
  • Values:

    0	Generated or sketched Detailed role: Select this option when creating area fills mainly on generated or sketched geometries.
    1	Imported from external format Detailed role: Select this option when creating area fills mainly on views imported from external formats.

• CATDrwAssocDimOnApproximate
  Role: Allow the creation of associative dimension in approximate views
  Detailed role: If checked, the dimension associativity rule defined in the "associativity on 3D" section will be applied in approximated views, else the dimensions will be non associative in those views.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 0
• CATDrwClippedDim
  Role: Clipped dimensions
  Detailed role: Defines the color used in analysis display mode to represent dimensions that are clipped.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• CATDrwClippedDimB
  Role: Define blue constituent of the color used in analysis display mode to represent dimensions that are clipped
  Detailed role: Defines blue constituent of the color used in analysis display mode to represent dimensions that are clipped.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• CATDrwClippedDimG
  Role: Define Green constituent of the color used in analysis display mode to represent dimensions that are clipped
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent dimensions that are clipped.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 200
  • Min value: 0
  • Max value: 255
• CATDrwClippedDimR
  Role: Define Red constituent of the color used in analysis display mode to represent dimensions that are clipped
  Detailed role: Defines Red constituent of the color used in analysis display mode to represent dimensions that are clipped.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 255
  • Min value: 0
  • Max value: 255
• CATDrwDimClipNoShow
  Role: Put in no show dimension on non-visible geometry
  Detailed role: Put in no show dimension on non-visible geometry and annotations associated in position.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 1
• CATDrwFTAAnnotLay
  Role: Keeps the layout and dress-up of 2D extracted annotations
  Detailed role: Keeps the layout and dress-up of 2D extracted annotations.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• CATDrwGeomOf2DLView
  Role: Generate 2D geometry
  Detailed role: Generates the 2D geometry from Layout views.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 1
• CATDrwHRVLOD
  Role: Level of detail
  Detailed role: Specifies the level of detail
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: integer
  • Default value: 4
  • Min value: 1
  • Max value: 15
• CATDrwIsolatedDim
  Role: Isolated dimensions
  Detailed role: Defines the color used in analysis display mode to represent dimensions that are not linked to any geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• CATDrwIsolatedDimB
  Role: Define Blue constituent of the color used in analysis display mode to represent dimensions that are not linked to any geometry
  Detailed role: Defines Blue constituent of the color used in analysis display mode to represent dimensions that are not linked to any geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 160
  • Min value: 0
  • Max value: 255
• CATDrwIsolatedDimG
  Role: Define Green constituent of the color used in analysis display mode to represent dimensions that are not linked to any geometry
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent dimensions that are not linked to any geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• CATDrwIsolatedDimR
  Role: Define Red constituent of the color used in analysis display mode to represent dimensions that are not linked to any geometry
  Detailed role: Defines Red constituent of the color used in analysis display mode to represent dimensions that are not linked to any geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• CATDrwLODPrintMod
  Role: Level of detail used to print the drawing
  Detailed role: Level of detail(i.e. the definition, in dpi) that will be used to print the drawing
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: integer
  • Default value: 1
  • Values:

    0	Low quality
    1	Normal quality
    2	High quality
    3	Customize

• CATDrwLODVisuMod
  Role: Level of detail used to visualize the drawing
  Detailed role: Level of detail(i.e. the definition, in dpi) that will be used to visualize the drawing
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: integer
  • Default value: 1
  • Values:

    0	Low quality
    1	Normal quality
    2	High quality
    3	Customize

• CATDrwPreventDittoDrag
  Role: Prevents you move 2D components using the mouse
  Detailed role: Prevents you move 2D components using the mouse.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 0
• CATDrwPreventDittoScale
  Role: Prevents you scale 2D components using the mouse
  Detailed role: Prevents you scale 2D components using the mouse.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 0
• CATDrwRasterMod
  Role: Raster mode options
  Detailed role: Configures raster views options
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: integer
  • Default value: 0
  • Values:

    0	Dynamic hidden line removal
    1	Shading
    2	Shading with edges
    3	Shading, no light source
    4	Shading with edges, no light source

• CATDrwResizeTableEdition
  Role: Recompute table when editing cell
  Detailed role: Recomputes the table when editing a cell.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 1
• CATDrwSelBodyInAss
  Role: Activates or deactivates selection of body in assembly.
  Detailed role: Activates or deactivates selection of body in assembly..
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• CATDrwSheetFromStyle
  Role: Create a new sheet from the style defined in xml file
  Detailed role: Create a new sheet from the style defined in xml file.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 0
  • Values:

    1	Create a new sheet from the xml file Detailed role: Create a new sheet from the xml file..
    0	Create a new sheet from the first one Detailed role: Create a new sheet from the first one.

• CATDrwStrictPositioning
  Role: Project view axis system based on 3D axis system
  Detailed role: The coordinate system of the view projection plane will be defined by projecting the 3D axis system.
  
  • Tab Page: /Mechanical Design/Drafting/Layout
  • Type: boolean
  • Default value: 0
• CATDrwTableAutoSplit
  Role: Split table on several sheets
  Detailed role: The split is only performed on bill of material, reports and table from CSV file.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 1
• CATDrwTbAnchorPointSetting
  Role: Anchor point setting
  Detailed role: Property toolbar anchor point setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbBoldSetting
  Role: Bold setting
  Detailed role: Property toolbar bold setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbColorSetting
  Role: Color setting
  Detailed role: Property toolbars color setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbDimensionLineSetting
  Role: Dimension line setting
  Detailed role: Property toolbars dimension line setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbFontNameSetting
  Role: Font name setting
  Detailed role: Property toolbar font name setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbFontSizeSetting
  Role: Font sizesetting
  Detailed role: Property toolbar font size setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbFrameSetting
  Role: Frame setting
  Detailed role: Property toolbars frame setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbItalicSetting
  Role: Italic setting
  Detailed role: Property toolbar italic setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbJustificationSetting
  Role: Justification setting
  Detailed role: Property toolbar justification setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbLineTypeSetting
  Role: Line type setting
  Detailed role: Property toolbars line type setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbNumDispDescSetting
  Role: Number display description setting
  Detailed role: Property toolbars number display description setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbPatternSetting
  Role: Pattern setting
  Detailed role: Property toolbars pattern setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbPointTypeSetting
  Role: Point type setting
  Detailed role: Property toolbars point type setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbPrecisionSetting
  Role: Precision setting
  Detailed role: Property toolbars precision setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbStrikeThroughSetting
  Role: Strike through setting
  Detailed role: Property toolbar strike through setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbSymbolSetting
  Role: Symbol setting
  Detailed role: Property toolbars symbol setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbThicknessSetting
  Role: Thickness setting
  Detailed role: Property toolbars thickness setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbTolerancesSetting
  Role: Tolerance properties settings
  Detailed role: Property toolbar behavior for tolerance description and tolerance proerties.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• CATDrwTbUnderOverLineSetting
  Role: Underline/over line setting
  Detailed role: Property toolbar underline/over line setting.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 2
  • Values:

    0	Fix value
    1	Value based on element type
    2	Value based on style
    3	Value based on style (no overload)

• ConvertBalloonAsGraphic
  Role: Convert balloon as a graphic
  Detailed role: Allows you to convert balloons as a simple graphic element.
  
  • Tab Page: /General/Compatibility/V4V5 Draw
  • Type: boolean
  • Default value: 0
• ConvertDimensionAsGraphic
  Role: Convert dimension as a graphic
  Detailed role: Allows you to convert dimensions as a simple graphic element.
  
  • Tab Page: /General/Compatibility/V4V5 Draw
  • Type: boolean
  • Default value: 0
• ConvertOtherAnnotAsGraphic
  Role: Convert other annotation as a graphic
  Detailed role: Allows you to convert texts,GDT,datum,roughness as a simple graphic element.
  
  • Tab Page: /General/Compatibility/V4V5 Draw
  • Type: boolean
  • Default value: 0
• CstColorB
  Role: Blue constituent of color used to display constraints symbols
  Detailed role: Defines the Blue constituent of color used to display constraints symbols. Changing it will change the color of all constraints representations.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: integer
  • Default value: 255
  • Min value: 0
  • Max value: 255
• CstColorG
  Role: Green constituent of color used to display constraints symbols
  Detailed role: Defines the constituent of color used to display constraints symbols. Changing it will change the color of all constraints representations.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• CstColorR
  Role: Red constituent of color used to display constraints symbols
  Detailed role: Defines the Red constituent of color used to display constraints symbols. Changing it will change the color of all constraints representations.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• CstCreation
  Role: Create detected and feature-based constraints
  Detailed role: Creates both detected and feature-based constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 0
• CstRefSize
  Role: Reference size to display constraints symbols
  Detailed role: Defines the size used as reference to display constraints symbols. Changing it will change
  the size of all constraints representations.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: double
  • Default value: 2.0
  • Min value: 0.0
  • Max value: 1000000
• CstVisu
  Role: Display constraints
  Detailed role: Visualizes the following kinds of constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• CstVisuCoinci
  Role: Display coincidence constraints
  Detailed role: Displays coincidence constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• CstVisuConcen
  Role: Display concentricity constraints
  Detailed role: Displays concentricity constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• CstVisuHori
  Role: Display horizontality constraints
  Detailed role: Displays horizontality constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• CstVisuPara
  Role: Display parallelism constraints
  Detailed role: Displays parallelism constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• CstVisuPerpen
  Role: Display perpendicularity constraints
  Detailed role: Displays perpendicularity constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• CstVisuSym
  Role: Display symmetry constraints
  Detailed role: Displays symmetry constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• CstVisuTangen
  Role: Display tangency constraints
  Detailed role: Displays tangency constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• CstVisuVerti
  Role: Display verticality constraints
  Detailed role: Displays verticality constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• DetailLinetype
  Role: Line type for detail view
  Detailed role: Selects line type for detail view.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: unsigned integer
  • Default value: 4
  • Min value: 0
  • Max value: 7
• Dim3DCst
  Role: Dimensions generated from 3D constraints
  Detailed role: Defines the color used in analysis display mode to represent dimensions generated from 3D constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• Dim3DCstB
  Role: Define Blue constituent of the color used in analysis display mode to represent dimensions generated from 3D constraints
  Detailed role: Define Blue constituent of the color used in analysis display mode to represent dimensions generated from 3D constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 18
  • Min value: 0
  • Max value: 255
• Dim3DCstG
  Role: Define Green constituent of the color used in analysis display mode to represent dimensions generated from 3D constraints
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent dimensions generated from 3D constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 222
  • Min value: 0
  • Max value: 255
• Dim3DCstR
  Role: Define the Red constituent of color used in analysis display mode to represent dimensions generated from 3D constraints
  Detailed role: Defines the Red constituent of color used in analysis display mode to represent dimensions generated from 3D constraints.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 22
  • Min value: 0
  • Max value: 255
• DimBroken
  Role: Dimensions converted to graphical elements
  Detailed role: Defines the color used in analysis display mode to represent dimensions converted to graphical elements.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimBrokenB
  Role: Define Blue constituent of the color used in analysis display mode to represent dimensions converted to graphical elements
  Detailed role: Defines Blue constituent of the color used in analysis display mode to represent dimensions converted to graphical elements.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• DimBrokenG
  Role: Define Green constituent of the color used in analysis display mode to represent dimensions converted to graphical elements
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent dimensions converted to graphical elements.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 128
  • Min value: 0
  • Max value: 255
• DimBrokenR
  Role: Define Red constituent of the color used in analysis display mode to represent dimensions converted to graphical elements
  Detailed role: Defines Red constituent of the color used in analysis display mode to represent dimensions converted to graphical elements.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• DimCircle
  Role: Create dimensions on circle's center or edge
  Detailed role: Creates dimensions on circle's center or edge.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Values:

    0	Create dimensions on circle's center Detailed role: Creates dimensions on circle's center
    1	Create dimensions on circle's edge Detailed role: Creates dimensions on circle's edge

• DimDesignMode
  Role: Activate dimension analysis display mode
  Detailed role: Displays the various types of dimensions in different and customizable colors.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimDetectChamfer
  Role: Detect chamfer
  Detailed role: Detects chamfer and creates the appropriate dimension.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimDriving
  Role: Dimensions driving 2D geometry
  Detailed role: Defines the color used in analysis display mode to represent dimensions that drive 2D geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimDrivingAuto
  Role: Create driving dimension
  Detailed role: Creates driving dimension between 2D geometry and 2D or 3D generated geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 0
• DimDrivingB
  Role: Define Blue constituent of the color used in analysis display mode to represent dimensions that drive 2D geometry
  Detailed role: Defines Blue constituent of the color used in analysis display mode to represent dimensions that drive 2D geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 255
  • Min value: 0
  • Max value: 255
• DimDrivingG
  Role: Define Green constituent of the color used in analysis display mode to represent dimensions that drive 2D geometry
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent dimensions that drive 2D geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• DimDrivingR
  Role: Define Red constituent of the color used in analysis display mode to represent dimensions that drive 2D geometry
  Detailed role: Defines Red constituent of the color used in analysis display mode to represent dimensions that drive 2D geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• DimFake
  Role: Fake dimensions
  Detailed role: Defines the color used in analysis display mode to represent fake dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimFakeB
  Role: Define Blue constituent of the color used in analysis display mode to represent fake dimensions
  Detailed role: Defines Blue constituent of the color used in analysis display mode to represent fake dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• DimFakeG
  Role: Define Green constituent of the color used in analysis display mode to represent fake dimensions
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent fake dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 64
  • Min value: 0
  • Max value: 255
• DimFakeR
  Role: Define Red constituent of the color used in analysis display mode to represent fake dimensions
  Detailed role: Defines Red constituent of the color used in analysis display mode to represent fake dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 128
  • Min value: 0
  • Max value: 255
• DimForce2D
  Role: Associativity on 3D
  Detailed role: Specify how associativity between dimensions and the 3D part or product is handled.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 1
  • Values:

    2	Only create non-associative dimensions Detailed role: Only creates dimensions on 3D without associativity.
    1	Allow non-associative dimensions Detailed role: Creates dimensions on 3D without associativity only if associativity with 3D is impossible.
    0	Never create non-associative dimensions Detailed role: Never creates dimensions on 3D without associativity.

• DimLinePosRelative
  Role: Constant offset between dimension line and geometry
  Detailed role: Lets the dimension line remain at a defined distance from the geometry when the geometry is moving.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 0
• DimLinePosValue
  Role: Default dimension line/geometry distance
  Detailed role: Defines the default distance between dimension line and geometry at creation and/or when moving the geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: double
  • Default value: 5.0
  • Min value: -1000.0
  • Max value: 1000.0
• DimMoveSubPart
  Role: Move only selected sub-part
  Detailed role: Allows to move only the selected sub-part of the dimension(dimension line, value, or dimension line secondary).
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 0
• DimNonAssociative
  Role: Non associative dimensions (on 3D)
  Detailed role: Defines the color used in analysis display mode to represent dimensions that are not associated to 3D geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimNonAssociativeB
  Role: Define Blue constituent of the color used in analysis display mode to represent dimensions that are not associated to 3D geometry
  Detailed role: Defines Blue constituent of the color used in analysis display mode to represent dimensions that are not associated to 3D geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 128
  • Min value: 0
  • Max value: 255
• DimNonAssociativeG
  Role: Define Green constituent of the color used in analysis display mode to represent dimensions that are not associated to 3D geometry
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent dimensions that are not associated to 3D geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 128
  • Min value: 0
  • Max value: 255
• DimNonAssociativeR
  Role: Define Red constituent of the color used in analysis display mode to represent dimensions that are not associated to 3D geometry
  Detailed role: Defines Red constituent of the color used in analysis display mode to represent dimensions that are not associated to 3D geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 128
  • Min value: 0
  • Max value: 255
• DimNotUpToDate
  Role: Dimensions for which are not up-to-date
  Detailed role: Defines the color used in analysis display mode to represent dimensions that are not up-to-date.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimNotUpToDate3DCst
  Role: Dimension that drive 3D constraint which are not up-to-date
  Detailed role: Defines the color used in analysis display mode to represent dimension that drive 3D constraint which are not up-to-date.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimNotUpToDate3DCstB
  Role: Define Blue constituent of the color used in analysis display mode to represent dimension that drive 3D constraint which are not up-to-date
  Detailed role: Defines Blue constituent of the color used in analysis display mode to represent dimension that drive 3D constraint which are not up-to-date.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 22
  • Min value: 0
  • Max value: 255
• DimNotUpToDate3DCstG
  Role: Define Green constituent of the color used in analysis display mode to represent dimension that drive 3D constraint which are not up-to-date
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent dimension that drive 3D constraint which are not up-to-date.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• DimNotUpToDate3DCstR
  Role: Define Red constituent of the color used in analysis display mode to represent dimension that drive 3D constraint which are not up-to-date
  Detailed role: Defines Red constituent of the color used in analysis display mode to represent dimension that drive 3D constraint which are not up-to-date.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 182
  • Min value: 0
  • Max value: 255
• DimNotUpToDateB
  Role: Define Blue constituent of the color used in analysis display mode to represent dimensions that are not up-to-date
  Detailed role: Defines Blue constituent of the color used in analysis display mode to represent dimensions that are not up-to-date.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 128
  • Min value: 0
  • Max value: 255
• DimNotUpToDateG
  Role: Define Green constituent of the color used in analysis display mode to represent dimensions that are not up-to-date
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent dimensions that are not up-to-date.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• DimNotUpToDateR
  Role: Define Red constituent of the color used in analysis display mode to represent dimensions that are not up-to-date
  Detailed role: Defines Red constituent of the color used in analysis display mode to represent dimensions that are not up-to-date.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 255
  • Min value: 0
  • Max value: 255
• DimSketch
  Role: Dimension following the cursor (CTRL toggles)
  Detailed role: Dimension follows the mouse cursor.Pressing the "CTRL" key lets you temporarily activate or deactivate this mode.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimSnap
  Role: Snap by default (SHIFT toggles)
  Detailed role: Activates snapping when moving dimensions.Use the "Configure snapping" button to customize the way the dimension snaps.
  Pressing the "Shift" key lets you temporarily activate or deactivate this mode.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimSnapOnGrid
  Role: Configure dimension snapping
  Detailed role: Configures the way dimension snaps its position on the grid or its value between symbols.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 0
• DimSnapValue
  Role: Configure dimension snapping
  Detailed role: Configures the way dimension snaps its position on the grid or its value between symbols.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimTrue
  Role: True dimensions
  Detailed role: Defines the color used in analysis display mode to represent true length dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DimTrueB
  Role: Define Blue constituent of the color used in analysis display mode to represent true length dimensions
  Detailed role: Defines Blue constituent of the color used in analysis display mode to represent true length dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 255
  • Min value: 0
  • Max value: 255
• DimTrueG
  Role: Define Green constituent of the color used in analysis display mode to represent true length dimensions
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent true length dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• DimTrueR
  Role: Define Red constituent of the color used in analysis display mode to represent true length dimensions
  Detailed role: Defines Red constituent of the color used in analysis display mode to represent true length dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 128
  • Min value: 0
  • Max value: 255
• DistinguishCaseInUnicitySetting
  Role: Distinguish lower case and upper case
  Detailed role: Distinguish lower case and upper case characters while checking naming uniqueness.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 0
• DistinguishCodeInUnicitySetting
  Role: Distinguish SBCS and DBCS characters
  Detailed role: Distinguish SBCS and DBCS characters while checking naming uniqueness.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 0
• Drw_settings_AllowDistortions
  Role: Allow distortions in the grid
  Detailed role: Allows different graduations and spacing in the grid.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 0
• Drw_settings_ColorConstructElts
  Role: Construction elements (for pre-V5R11 drawings)
  Detailed role: Defines the color used for construction elements for pre-V5R11 drawings.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: unsigned integer
  • Default value: 9211020
  • Min value: 0
  • Max value: 16777215
• Drw_settings_ColorDiagNotChangedElts
  Role: Not-changed elements
  Detailed role: Defines the color used for not-changed elements.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: unsigned integer
  • Default value: 8388608
  • Min value: 0
  • Max value: 16777215
• Drw_settings_ColorDiagNotConsistentElts
  Role: Inconsistent elements
  Detailed role: Defines the color used for elements in inconsistent models.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: unsigned integer
  • Default value: 16711680
  • Min value: 0
  • Max value: 16777215
• Drw_settings_ColorDiagOverDefinedElts
  Role: Over-constrained elements
  Detailed role: Defines the color used for elements in over-constrained models.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: unsigned integer
  • Default value: 16711935
  • Min value: 0
  • Max value: 16777215
• Drw_settings_ColorDiagWellDefinedElts
  Role: Iso-constrained elements
  Detailed role: Defines the color used for elements in iso-constrained models.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: unsigned integer
  • Default value: 65280
  • Min value: 0
  • Max value: 16777215
• Drw_settings_ColorSmartPick
  Role: SmartPick
  Detailed role: Defines the color used for SmartPick elements.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: unsigned integer
  • Default value: 4417109
  • Min value: 0
  • Max value: 16777215
• Drw_settings_CpltDirHorVert
  Role: Horizontality and verticality of two elements
  Detailed role: Defines that two elements are horizontal or vertical to each other.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• Drw_settings_CpltDirParPerpTan
  Role: Parallelism, perpendicularity and tangency of two elements
  Detailed role: Defines that two elements are parallel,perpendicular or tangent to each other.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• Drw_settings_CpltPosHorVertTo
  Role: Alignment of two elements
  Detailed role: Defines that two elements are aligned with each other.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• Drw_settings_CpltPosSupport
  Role: Support lines and circles
  Detailed role: Detects lines and circles support.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• Drw_settings_CreateCenter
  Role: Create circle and ellipse centers
  Detailed role: Creates circle and ellipse centers when creating circles and ellipses.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• Drw_settings_DiagElts
  Role: Diagnostic visualization
  Detailed role: Defines the visualization of diagnostic on the constrained elements.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• Drw_settings_DragElts
  Role: Allow direct geometry manipulation
  Detailed role: Lets you move geometry using the mouse.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• Drw_settings_DragModeR14
  Role: Define the solving mode for moving elements
  Detailed role: Lets you define the solving mode for moving elements.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: integer
  • Default value: 1
  • Values:

    0	Standard mode Detailed role: Moves as many elements as possible and also respect existing constraints.
    1	Minimum move mode Detailed role: Moves as few elements as possible and also respect existing constraints.
    2	Relaxation mode Detailed role: Moves elements by re-distributing them over the sketch.

• Drw_settings_DragWithEndPts
  Role: Drag elements end points included
  Detailed role: Drags elements, including their end points.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 1
• Drw_settings_GridDisplay
  Role: Display the grid
  Detailed role: Defines that you will display the grid.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 1
• Drw_settings_GridPrimarySpacing
  Role: Main grid spacing in horizontal direction
  Detailed role: Defines the main spacing to be applied to the grid in the horizontal direction.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: double
  • Default value: 100.0
  • Min value: 0.0
  • Max value: 100000
  • Step: 1.0
• Drw_settings_GridSecondaryStep
  Role: Number of graduations in horizontal direction
  Detailed role: Applies a given number of graduations to each primary spacing in the horizontal direction.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: integer
  • Default value: 10
  • Min value: 1
  • Max value: 100000
• Drw_settings_GridSnapPt
  Role: Snap to point
  Detailed role: Helps you creating points at given locations.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 1
• Drw_settings_GridVPrimarySpacing
  Role: Main grid spacing in vertical direction
  Detailed role: Defines the main spacing to be applied to the grid in the vertical direction.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: double
  • Default value: 100.0
  • Min value: 0.0
  • Max value: 100000
  • Step: 1.0
• Drw_settings_GridVSecondaryStep
  Role: Number of graduations in vertical direction
  Detailed role: Applies a given number of graduations to each primary spacing in the vertical direction.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: integer
  • Default value: 10
  • Min value: 1
  • Max value: 100000
• Drw_settings_ShowPosition
  Role: Show H and V fields in the "Tools Palette"
  Detailed role: Shows the H and V fields in the "Tools Palette" when creating 2D geometry or when offsetting elements.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 0
• DrwAllDetailOneSheet
  Role: Migrate details and symbols in one detail sheet
  Detailed role: Migrates details and symbols in one sheet of detail.
  
  • Tab Page: /General/Compatibility/V4V5 Draw
  • Type: boolean
  • Default value: 0
• DrwAllowUserDefault
  Role: Prevents you from creating and resetting User Default Properties
  Detailed role: Prevents you from creating and resetting User Default Properties.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 0
• DrwAnnotActivSnap
  Role: Snap by default (SHIFT toggles)
  Detailed role: Activates snapping when moving annotations.Click "Configure snapping" to specify whether annotations should be
  snapped on the grid, according to the orientation, or both.Press the "SHIFT" key to activate/deactivate this option temporarily.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 1
• DrwAnnotSnapMod
  Role: Configure snapping
  Detailed role: Specifies whether annotations should be snapped on the grid, according to the orientation, or both.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: integer
  • Default value: 2
  • Values:

    0	On the grid Detailed role: Snaps the position of the annotation on the grid.
    1	On reference orientation Detailed role: Snaps the orientation according to reference.
    2	Both Detailed role: Cumulates the orientation snapping on the reference and the position snapping on the grid.

• DrwBalloonAssoc
  Role: Uses a parameter defined in 3D to create balloons
  Detailed role: Uses a parameter defined in 3D to create balloons.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 1
• DrwBalloonAssocMod
  Role: Uses a parameter defined in 3D to create balloons
  Detailed role: Uses a parameter defined in 3D to create balloons.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: integer
  • Default value: 0
  • Values:

    0	Numbering Detailed role: Numbering.
    1	Instance Name Detailed role: Instance Name.
    2	Part Number Detailed role: Part Number.

• DrwBlinkRed
  Role: Migrate blink element as red color
  Detailed role: Migrates blink element as red color.
  
  • Tab Page: /General/Compatibility/V4V5 Draw
  • Type: boolean
  • Default value: 0
• DrwBreakoutThickness
  Role: Thickness of breakout view line
  Detailed role: Selects thickness of breakout view line.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: unsigned integer
  • Default value: 2
  • Min value: 1
  • Max value: 55
• DrwBrokenThickness
  Role: Thickness of broken view line
  Detailed role: Selects thickness of broken view line.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: unsigned integer
  • Default value: 1
  • Min value: 1
  • Max value: 55
• DrwButtonReset
  Role: Display reset button in dialog boxes
  Detailed role: Displays the reset button in the dialog boxes which support this feature.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 1
• DrwCalloutSize
  Role: Callout visualization size not dependent on view scale (for pre-V5 R11 drawings)
  Detailed role: The callout visualization size is not dependent on the view scale (for pre-V5 R11 drawings).
  
  • Tab Page: /Mechanical Design/Drafting/Layout
  • Type: boolean
  • Default value: 1
• DrwDefPrintPicture
  Role: Customize print of the drawing by setting specified number of dpi(dots per inch)
  Detailed role: Customizes print of the drawing by setting specified number of dpi(dots per inch).
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: integer
  • Default value: 300
  • Min value: 1
  • Max value: 1200
• DrwDefVisuPicture
  Role: Customize visualization of the drawing by setting specified number of dpi(dots per inch)
  Detailed role: Customizes visualization of the drawing by setting specified number of dpi(dots per inch).
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: integer
  • Default value: 91
  • Min value: 1
  • Max value: 1200
• DrwDetailThickness
  Role: Thickness of detail view line
  Detailed role: Selects thickness of detail view line.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: unsigned integer
  • Default value: 1
  • Min value: 1
  • Max value: 55
• DrwDimOnNonVisGeom
  Role: Dimensions on non-visible geometry
  Detailed role: Defines the color used in analysis display mode to represent dimensions that are attached to geometry which is not visible.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 0
• DrwDimOnNonVisGeomB
  Role: Define Blue constituent of the color used in analysis display mode to represent dimensions that are attached to geometry which is not visible
  Detailed role: Defines Blue constituent of the color used in analysis display mode to represent dimensions that are attached to geometry which is not visible.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 255
  • Min value: 0
  • Max value: 255
• DrwDimOnNonVisGeomG
  Role: Define Green constituent of the color used in analysis display mode to represent dimensions that are attached to geometry which is not visible
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent dimensions that are attached to geometry which is not visible.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 255
  • Min value: 0
  • Max value: 255
• DrwDimOnNonVisGeomR
  Role: Define Red constituent of the color used in analysis display mode to represent dimensions that are attached to geometry which is not visible
  Detailed role: Defines Red constituent of the color used in analysis display mode to represent dimensions that are attached to geometry which is not visible.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• DrwDittoInvViewScale
  Role: Create 2D component with a constant size
  Detailed role: Applies a scale to the 2D component instance, at creation, so as to compensate the view scale.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 0
• DrwEndPtsDuplGenGeom
  Role: Create end points when duplicating generated geometry
  Detailed role: Creates end points when geometry generated from the 3D is duplicated.
  
  • Tab Page: /Mechanical Design/Drafting/Geometry
  • Type: boolean
  • Default value: 0
• DrwExactPreview
  Role: Exact preview for view generation
  Detailed role: Lets you preview the views in design mode even if you are working in visualization mode.
  Leaving this option unselected uses the visualization data embedded in the 3D document for preview.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 1
• DrwExplodeSymbolo
  Role: Explode symbol when migrating to V5 elements
  Detailed role: Explodes symbol when migrating to V5 elements.
  
  • Tab Page: /General/Compatibility/V4V5 Draw
  • Type: boolean
  • Default value: 0
• DrwFeatUnderView
  Role: Displays features under views
  Detailed role: Displays features under views.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 0
• DrwFrameAndTitleBlockPath
  Role: Path of the directory containing frame and title block styles
  Detailed role: Specifies the path to the directory containing the frame and title block styles.
  
  • Tab Page: /Mechanical Design/Drafting/Layout
  • Type: URN
  • Default value:
• DrwGDTRigidPosLink
  Role: Geometrical tolerance
  Detailed role: If checked every positional link of the geometrical tolerances annotation
  body are created rigid by default. Notice that positional links of leaders are not impacted by this
  setting. This is especially useful for GDT created on a dimension text.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 0
• DrwGDTSnappingOn
  Role: Geometrical tolerance leader extremity normal to reference
  Detailed role: Creates the extremity of geometrical tolerance leaders normal to a reference direction.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 0
• DrwGenDimFromPart
  Role: Generate dimensions from parts included in assembly views
  Detailed role: Generates dimensions from parts included in assembly views.
  
  • Tab Page: /Mechanical Design/Drafting/Generation
  • Type: boolean
  • Default value: 0
• DrwGenerateRedCross
  Role: Generate red cross on annotation
  Detailed role: Annotations which are extracted from 3D are marked with red cross,
  if their geometry does not get extracted or
  if their geometry is hidden in the current view.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• DrwGenerationForBox
  Role: Only generate parts larger than specified size
  Detailed role: Only generates parts larger than the specified size.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• DrwGenerationForBoxTol
  Role: Only generate parts larger than specified size
  Detailed role: Only generates parts larger than specified size.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: double
  • Default value: 1.0
  • Min value: 0.0
  • Max value: 1000000
• DrwGenerationModeVal
  Role: View generation mode
  Detailed role: Defines how views will be generated.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: integer
  • Default value: 0
  • Values:

    0	Exact view
    1	CGR
    2	Raster
    3	Approximate

• DrwGenFilConfigure
  Role: Configure fillet generation
  Detailed role: Configures fillet generation.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: integer
  • Default value: 1
  • Values:

    1	Boundaries Detailed role: Defines whether fillet boundaries are to be displayed on views.
    2	Symbolic Detailed role: Defines whether symbolic fillets are to be displayed on views.
    3	Projected original edges Detailed role: Defines whether projected original edges are to be displayed on views.
    4	Approximated original edges Detailed role: Defines whether original edges are to be displayed on views.

• DrwGMECreation
  Role: Keep graphical dress-up manually set on geometry
  Detailed role: Keeps graphical dress-up manually set on geometry.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 1
• DrwGVSXmlV4V5
  Role: Default generative view style
  Detailed role: Selects the default xml file for migration of the view.
  
  • Tab Page: /General/Compatibility/V4V5 Draw
  • Type: string
  • Default value: DefaultGenerativeStyle.xml
• DrwLineUpAutoFunnel
  Role: Automatically add a funnel (For pre-V5R14 cumulated dimensions)
  Detailed role: Automatically adds a funnel whenever the value of the dimension cannot be displayed correctly without it (For pre-V5R14 cumulated dimensions only).
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DrwLineUpCumulVal
  Role: Align cumulated dimension values
  Detailed role: Aligns all the values of a group of cumulated dimensions on the value of the smallest dimension of the group.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DrwLineUpStackVal
  Role: Align stacked dimension values
  Detailed role: Aligns all the values of a group of stacked dimensions on the value of the smallest dimension of the group.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 0
• DrwLockBackgroundView
  Role: Prevent background view access
  Detailed role: Prevents you from accessing the background view.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 0
• DrwLockDimDriving3D
  Role: Prevent dimensions from driving 3D constraints
  Detailed role: Prevents you from driving 3D constraints via dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 1
• DrwLockSwitchStandard
  Role: Prevent switch of standard
  Detailed role: Prevents you from switching standards.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 0
• DrwLockUpdateStandard
  Role: Prevent update of standard
  Detailed role: Prevents you from updating standards.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 0
• DrwOcclusionCulling
  Role: Enable occlusion culling
  Detailed role: Activates or deactivates occlusion culling.
  Occlusion culling improves display performance by avoiding redisplay of hidden elements,
  particularly useful when viewing highly compartmented scenes such as plants and buildings.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• DrwOnlyFileNewFrom
  Role: Allows you to create drawings only with the File/New From... command
  Detailed role: Allows you to create drawings only with the File/New From... command.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 0
• DrwOnlyUserDefault
  Role: Only lets you create elements with User Default Properties
  Detailed role: Only lets you create elements with User Default Properties.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 0
• DrwPaperLengthUnit
  Role: Paper length unit
  Detailed role: Sets length unit to sheet paper space.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: integer
  • Default value: 1
  • Values:

    1	Millimeter (mm)
    3	Centimeter (cm)
    5	Inch (in)

• DrwPreventGVS
  Role: Prevent generative view style usage
  Detailed role: Prevent generative view style usage.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 1
• DrwProject3DPts
  Role: Project 3D points
  Detailed role: Projects 3D points.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• DrwProject3DSymbol
  Role: Project 3D points
  Detailed role: Indicates whether projected 3D points display the symbol inherited from the 3D or the selected symbol.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: integer
  • Default value: 1
  • Min value: 0
  • Max value: 9
• DrwSectionThickness
  Role: Thickness of section view line
  Detailed role: Selects thickness of section view line.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: unsigned integer
  • Default value: 1
  • Min value: 1
  • Max value: 55
• DrwSkinThickness
  Role: Thickness of skin view line
  Detailed role: Selects thickness of skin view line.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: unsigned integer
  • Default value: 2
  • Min value: 1
  • Max value: 55
• DrwStyleCreation
  Role: Use style values to create new objects
  Detailed role: Use style values to create new objects.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 0
• DrwSyncUpdate
  Role: Synchronize during update
  Detailed role: Synchronize all the views and sheets in the drawing during update.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 1
• DrwTableRigidPosLink
  Role: Table
  Detailed role: If checked every positional link of the table annotation body are created rigid by default.
  Notice that positional links of leaders are not impacted by this setting.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 0
• DrwTechFeatDim
  Role: Technological feature dimensions
  Detailed role: Defines the color used in analysis display mode to represent technological feature dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: boolean
  • Default value: 1
• DrwTechFeatDimB
  Role: Define Blue constituent of the color used in analysis display mode to represent technological feature dimensions
  Detailed role: Defines Blue constituent of the color used in analysis display mode to represent technological feature dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 128
  • Min value: 0
  • Max value: 255
• DrwTechFeatDimG
  Role: Define Green constituent of the color used in analysis display mode to represent technological feature dimensions
  Detailed role: Defines Green constituent of the color used in analysis display mode to represent technological feature dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 0
  • Min value: 0
  • Max value: 255
• DrwTechFeatDimR
  Role: Define Red constituent of the color used in analysis display mode to represent technological feature dimensions
  Detailed role: Defines Red constituent of the color used in analysis display mode to represent technological feature dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: integer
  • Default value: 128
  • Min value: 0
  • Max value: 255
• DrwTextLeadSnappingOn
  Role: When creating a text, it makes the leader perpendicular to the reference
  Detailed role: When creating a text, it makes the leader perpendicular to the reference.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 0
• DrwTextOnAttachmentPtsOnly
  Role: Allow attachment points selection during positional link creation
  Detailed role: If this option is activated, it is possible to select attachment points on annotation when creating an annotation or creating a positional link.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 1
• DrwTextRigidPosLink
  Role: Text
  Detailed role: If checked positional link of the text annotation body are created rigid by default. Notice that positional
  links of leaders are not impacted by this setting.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 0
• DrwTextSnappingOn
  Role: Create orientation link between the text and the reference
  Detailed role: Activate the orientation link when a reference is provided during text
  creation. This option can be inverted by pressing shift key during reference
  selection. Notice that this option requires the snapping to be on, with a
  snapping mode that includes orientation snapping.
  
  • Tab Page: /Mechanical Design/Drafting/Annotation and Dress-Up
  • Type: boolean
  • Default value: 0
• ExplodeDitto
  Role: Explode ditto when migrating to V5 elements
  Detailed role: Explodes ditto when migrating to V5 elements.
  
  • Tab Page: /General/Compatibility/V4V5 Draw
  • Type: boolean
  • Default value: 0
• Gen3DColors
  Role: Inherit 3D colors
  Detailed role: Inherits the colors of a part to be automatically generated onto the views.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• GenApplyUncut
  Role: Apply 3D specifications
  Detailed role: Apply 3D specifications.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 1
• GenAxisCreate
  Role: Generate axis lines
  Detailed role: Generates axis lines.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• GenBalloonByInstance
  Role: Creation of a balloon for each instance of a product
  Detailed role: Creates a balloon for each instance of a product.
  
  • Tab Page: /Mechanical Design/Drafting/Generation
  • Type: boolean
  • Default value: 0
• GenCenterCreate
  Role: Generate center lines
  Detailed role: Generates center lines.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• GenDim
  Role: Generate dimensions when updating the sheet
  Detailed role: Generate dimensions when updating the sheet.
  
  • Tab Page: /Mechanical Design/Drafting/Generation
  • Type: boolean
  • Default value: 0
• GenDimAnal
  Role: Analysis after generation
  Detailed role: Displays the "Dimension generation analysis" dialog box after generation.
  
  • Tab Page: /Mechanical Design/Drafting/Generation
  • Type: boolean
  • Default value: 1
• GenDimAutoPos
  Role: Automatic positioning after dimension generation
  Detailed role: Automatically positions dimensions after generation.
  
  • Tab Page: /Mechanical Design/Drafting/Generation
  • Type: boolean
  • Default value: 0
• GenDimAutoTrans
  Role: Allow automatic transfer of dimensions between views
  Detailed role: Automatically transfers dimensions to the best view when regenerating.
  
  • Tab Page: /Mechanical Design/Drafting/Generation
  • Type: boolean
  • Default value: 0
• GenDimFilter
  Role: Filters before dimension generation
  Detailed role: Displays the "Dimension generation filters" dialog box before generation.
  
  • Tab Page: /Mechanical Design/Drafting/Generation
  • Type: boolean
  • Default value: 0
• GenDimSemiAutoTimeOut
  Role: Delay between dimensions generation for step-by-step mode
  Detailed role: Specifies the delay between each dimension generation when generating dimensions step-by-step.
  
  • Tab Page: /Mechanical Design/Drafting/Generation
  • Type: integer
  • Default value: 2
  • Min value: 1
  • Max value: 300
• GenFilCreate
  Role: Generate fillet
  Detailed role: Generates fillet.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 1
• GenHiddenLines
  Role: Generate hidden lines
  Detailed role: Generates hidden lines.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• GenPropagation
  Role: Reproduce broken and breakout specifications
  Detailed role: Reproduces the broken and breakout specifications.
  
  • Tab Page: /Mechanical Design/Drafting/Layout
  • Type: boolean
  • Default value: 0
• GenThreadCreate
  Role: Generate threads
  Detailed role: Generate threads.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• GenWireFrame
  Role: Projects 3D wireframe
  Detailed role: Visualizes both the wireframe and the geometry on generated views.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: boolean
  • Default value: 0
• GenWireFrameMod
  Role: Configure wireframe projection
  Detailed role: Configures wireframe projection.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: integer
  • Default value: 1
  • Values:

    1	Projected 3D wireframe can be hidden Detailed role: Indicates that projected 3D wireframe can be hidden.
    2	Projected 3D wireframe is always visible Detailed role: Indicates that projected 3D wireframe is always visible.

• GraduatedColor
  Role: Graduate sheet background color (for pre-V5R14 drawings)
  Detailed role: Defines whether the sheet background color is to be graduated (for pre-V5R14 drawings).
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 0
• GraduatedColorDitto
  Role: Graduate 2D component sheet background color (for pre-V5R14 drawings)
  Detailed role: Defines whether the background color is to be graduated for detail 2D component (for pre-V5R14 drawings).
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 0
• HideWhenStartWkb
  Role: Hide new dialog box when starting workbench
  Detailed role: Hides new dialog box when starting workbench.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 0
• ImportCenterEndPoints
  Role: Create centers and end points
  Detailed role: Creates circles centers and curves end points when importing 2D geometry.
  
  • Tab Page: /General/Compatibility/V4V5 Draw
  • Type: boolean
  • Default value: 0
• LineUpBaseOffsetAngle
  Role: Default offset to reference for radius/diameter dimensions
  Detailed role: Defines the default value for the offset to the reference, for radius/diameter dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: double
  • Default value: 0.0
  • Min value: -180.0
  • Max value: 180.0
• LineUpBaseOffsetLength
  Role: Default offset to reference for length/distance/angle dimensions
  Detailed role: Defines the default value for the offset to the reference, for length/distance/angle dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: double
  • Default value: 0.0
  • Min value: -1000.0
  • Max value: 1000.0
• LineUpOffsetAngle
  Role: Default offset between dimensions for radius/diameter dimensions
  Detailed role: Defines the default value for the offset between dimensions, for radius/diameter dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: double
  • Default value: 15.0
  • Min value: -180.0
  • Max value: 180.0
• LineUpOffsetLength
  Role: Default offset between dimensions for length/distance/angle dimensions
  Detailed role: Default value for the offset between dimensions, for length/distance/angle dimensions.
  
  • Tab Page: /Mechanical Design/Drafting/Dimension
  • Type: double
  • Default value: 10.0
  • Min value: -1000.0
  • Max value: 1000.0
• ManipMovableDatumCre
  Role: Display indicate a movable datum manipulators during selection
  Detailed role: Indicate a movable datum manipulator lets you indicate if the datum is movable (it is only available for datum target) during selection.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• ManipMovableDatumMod
  Role: Display indicate a movable datum manipulators during modification
  Detailed role: Indicate a movable datum manipulator lets you indicate if the datum is movable (it is only available for datum target) during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• ManipMoveLeaderAnchorCre
  Role: Display move leader anchor point manipulators during selection
  Detailed role: Move leader anchor point manipulator lets you move the anchor point of the leader (and only the anchor point) during selection.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• ManipMoveLeaderAnchorMod
  Role: Display move leader anchor point manipulators during modification
  Detailed role: Move leader anchor point manipulator lets you move the anchor point of the leader (and only the anchor point) during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• ManipMoveLeaderCre
  Role: Display move leader manipulators during selection
  Detailed role: Move leader manipulator lets you move the leader extremity (and only the extremity) during selection.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• ManipMoveLeaderMod
  Role: Display move leader manipulators during modification
  Detailed role: Move leader manipulator lets you move the leader extremity (and only the extremity) during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• ManipMoveValueAnnotCre
  Role: Display slide text manipulators during selection
  Detailed role: Slide text manipulator lets you slide the text (only the text and not its leaders) during selection.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• ManipMoveValueAnnotMod
  Role: Display slide text manipulators during modification
  Detailed role: Slide text manipulator lets you slide the text (only the text and not its leaders) during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• ManipRefSize
  Role: Reference size for displaying manipulators
  Detailed role: Defines the reference size used for displaying manipulators.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: double
  • Default value: 2.0
  • Min value: 0.0
  • Max value: 1000000.0
• ManipResizeAnnotCre
  Role: Display resize text manipulators during selection
  Detailed role: Resize text manipulator lets you resize the annotation during selection.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• ManipResizeAnnotMod
  Role: Display resize text manipulators during modification
  Detailed role: Resize text manipulator lets you resize the annotation during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• ManipTranslationAnnotCre
  Role: Display stretch text manipulators during selection
  Detailed role: Stretch text manipulator lets you lets you stretch the text of the annotation during selection.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• ManipTranslationAnnotMod
  Role: Display stretch text manipulators during modification
  Detailed role: Stretch text manipulator lets you stretch the text of the annotation during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• ManipTranslationLeaderCre
  Role: Display resize leader attachment manipulators during selection
  Detailed role: Resize leader attachment manipulator lets you resize the leader attachment (and only the attachment) during selection.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• ManipTranslationLeaderMod
  Role: Display resize leader attachment text manipulators during modification
  Detailed role: Resize leader attachment manipulator lets you resize the leader attachment (and only the attachment) during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• ManipZoom
  Role: Manipulators zoomable or not
  Detailed role: Defines if manipulators are zoomable like geometry.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• Move2dPartCre
  Role: Display move dimension line secondary part manipulators during creation
  Detailed role: Move dimension line secondary part manipulator lets you easily move the secondary part of a dimension line (and only this part) during creation.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• Move2dPartMod
  Role: Display move dimension line secondary part manipulators during modification
  Detailed role: Move dimension line secondary part manipulator lets you easily move the secondary part of a dimension line (and only this part) during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• MoveDimLineCre
  Role: Display move dimension line manipulators during creation
  Detailed role: Move dimension line manipulator lets you easily move the dimension line (and only this line) during creation.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• MoveDimLineMod
  Role: Display move dimension line manipulators during modification
  Detailed role: Move dimension line manipulator lets you easily move the dimension line (and only this line) during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• MoveLeaderCre
  Role: Display move dimension leader manipulators during creation
  Detailed role: Move dimension leader manipulator lets you easily move the leader (and only this part) during creation.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• MoveLeaderMod
  Role: Display move dimension leader manipulators during modification
  Detailed role: Move dimension leader manipulator lets you easily move the leader (and only this part) during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• MoveValueCre
  Role: Display move value manipulators during creation
  Detailed role: Move value manipulator lets you easily move the dimension value (and only this value) during creation.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• MoveValueMod
  Role: Display move value manipulators during modification
  Detailed role: Move value manipulator lets you easily move the dimension value (and only this value) during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• ORunCre
  Role: Display modify overrun manipulators during creation
  Detailed role: Modify overrun manipulators let you modify interactively the overrun of each extension line during creation.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• ORunMod
  Role: Display modify overrun manipulators during modification
  Detailed role: Modify overrun manipulators let you modify interactively the overrun of each extension line during modification.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• PreventTrueDimension
  Role: Prevent true dimension creation in non-isometric views
  Detailed role: Prevents you from creating true dimension on non-isometric views.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 1
• PreventViewGeomUpgrade
  Role: Prevent view geometry upgrade
  Detailed role: Prevents you from upgrading the geometry of a view.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 1
• RotSnapAngle
  Role: Rotation snap angle
  Detailed role: Defines the snapping value used when rotating an element using the Select-Rotate command.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: double
  • Default value: 15.0
  • Min value: 1.
  • Max value: 355.
• RotSnapAuto
  Role: Automatic snapping when rotating
  Detailed role: Snapping automatically when rotating an element.
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 0
• Ruler
  Role: Shows or hides ruler
  Detailed role: Defines whether a ruler should be diplayed around the frame.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 0
• SectionLinetype
  Role: Line type for section view
  Detailed role: Selects line type for section view.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: unsigned integer
  • Default value: 4
  • Min value: 0
  • Max value: 7
• SheetNameUnicitySetting
  Role: Ensure uniqueness of sheet names
  Detailed role: No identical sheet names during creation and modification.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 0
• SkinLinetype
  Role: Line type for skin view
  Detailed role: Selects line type for skin view.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: unsigned integer
  • Default value: 1
  • Min value: 0
  • Max value: 7
• SnapOnDirectionSetting
  Role: Snap on privileged directions
  Detailed role: Snaps annotation leaders or arrows on privileged directions (horizontal or vertical, perpendicular or tangent to a reference).
  
  • Tab Page: /Mechanical Design/Drafting/Manipulators
  • Type: boolean
  • Default value: 1
• SourceSheetType
  Role: Defines the sheet used as a model to create the new sheet
  Detailed role: Defines the sheet used as a model to create the new sheet.
  
  • Tab Page: /Mechanical Design/Drafting/Layout
  • Type: integer
  • Default value: 1
  • Values:

    1	Uses the first sheet from current drawing Detailed role: Uses the first sheet from current drawing.
    2	Browses directories to get sheet from any stored-on-disk drawing Detailed role: Browses directories to get sheet from any stored-on-disk drawing.

• TreeFormulas
  Role: Displays relations
  Detailed role: Displays relations used in the current drawing in the tree.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 1
• TreeParameters
  Role: Display parameters
  Detailed role: Displays parameters used in the current drawing in the tree.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 1
• V4V5_LimitThickBold
  Role: Limit V4 thickness for bold attribute
  Detailed role: Beyond this V4 thickness the migration will apply a bold attribute on the annotation.
  
  • Tab Page: /General/Compatibility/V4V5 Draw
  • Type: double
  • Default value: 0.2
  • Min value: 0.0
  • Max value: 3.2
• ViewAxisSize
  Role: View axis size
  Detailed role: Specifies the reference size used for displaying view axes.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: double
  • Default value: 30.0
  • Min value: 0.0
  • Max value: 1000000
• ViewFrame
  Role: Display "view extension" frame automatically
  Detailed role: Displays a frame automatically representing the "view extension".
  
  • Tab Page: /Mechanical Design/Drafting/Layout
  • Type: boolean
  • Default value: 1
• ViewName
  Role: Create "view name" text automatically
  Detailed role: Creates the "view name" text automatically.
  
  • Tab Page: /Mechanical Design/Drafting/Layout
  • Type: boolean
  • Default value: 1
• ViewNameUnicityScopeSetting
  Role: Ensure uniqueness of view names either In Sheet or In Drawing
  Detailed role: No identical view names in sheet or No identical view names in drawing
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: integer
  • Default value: 0
  • Values:

    0	In sheet Detailed role: No identical view names in sheet.
    1	In drawing Detailed role: No identical view names in drawing.

• ViewNameUnicitySetting
  Role: Ensure uniqueness of view names
  Detailed role: No identical view names during creation and modification.
  
  • Tab Page: /Mechanical Design/Drafting/Administration
  • Type: boolean
  • Default value: 0
• ViewOrientation
  Role: Auxiliary and section views orientation according to profile
  Detailed role: Auxiliary and section views have the same orientation as that of the profile.
  
  • Tab Page: /Mechanical Design/Drafting/Layout
  • Type: boolean
  • Default value: 0
• ViewReferential
  Role: Display or hide axis of current view
  Detailed role: Displays or hides the axis of the current view.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 1
• ViewRefZoom
  Role: Zoom view axes
  Detailed role: Defines if the view axes are zoomable like geometry.
  
  • Tab Page: /Mechanical Design/Drafting/General
  • Type: boolean
  • Default value: 1
• ViewScale
  Role: Create "scaling factor" text automatically
  Detailed role: Creates the "scaling factor" text automatically.
  
  • Tab Page: /Mechanical Design/Drafting/Layout
  • Type: boolean
  • Default value: 1
• ViewUpdateStatusData
  Role: Defines the product information to be used to determine if a view needs to be updated
  Detailed role: Defines the product information to be used to determine if a view needs to be updated.
  
  • Tab Page: /Mechanical Design/Drafting/View
  • Type: integer
  • Default value: 1
  • Values:

    1	Uses the parts visualization data timestamps (cgr data) Detailed role: Uses the parts visualization data timestamps (cgr data).
    0	Uses the parts design data timestamps Detailed role: Uses the parts design data timestamps.

Copyright © 1999-2019, Dassault Systèmes. All rights reserved.