ConstraintsAndDimensions Setting Repository

ConstraintsAndDimensions

Role: Setting to manage Constraints and Dimensions visualization options

Detailed role: Constraints and Dimensions setting contains all options necessary to manage Constraints and Dimensions visualization

The ConstraintsAndDimensions repository has the following characteristics:

• Primary Tab Page: /General/Parameters and Measures/Constraints and Dimensions
• Repository File: Constraint
• Version: 1
• Full Compatibility: 1
• Upward Compatibility: 1

ConstraintsAndDimensions setting repository attributes:

• Angle
  Role: Attribute to define the constraint view angle
  Detailed role: Defines the angle in degrees from which the constraint is displayed in the geometry area, when you are rotating the geometry. This angle is measured between the normal to the screen and the constraint direction.
  
  • Type: double
  • Default value: 1
  • Default Value Role: By default the view angle is 1 deg
  • Min value: 0
  • Max value: 180
• Dim3dFilterStatus
  Role: Constraint Filter panel
  Detailed role: Attribute to define combination of settings on Constraint Filter panel.
  
  • Type: integer
  • Default value: 4097
  • Default Value Role: By default, all 11 checkboxes are checked and grayed out
• Display_Mode
  Role: Attribute to define the constraint display mode
  Detailed role: Defines the constraint display mode.
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default only the constraint value is displayed
  • Values:

    0	The constraint value is displayed
    1	The constraint name is displayed
    2	The constraint value and name are displayed
    3	The constraint valuen name and formula are displayed

• Display_Param_Mode
  Role: Attribute to Display Mode available as Knowledge parameter
  Detailed role: Defines whether Display Mode available as Knowledge parameter.
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default Display Mode not available as Knowledge parameter
  • Values:

    0	Display Mode not available as Knowledge parameter
    1	Display Mode available as Knowledge parameter

• Filter_ActivePartOnly
  Role: Constraint Filter panel
  Detailed role: Attribute to define combination of settings on Constraint Filter panel.
  
  • Type: integer
  • Default value: 4096
  • Default Value Role: By default, two check boxes under Product are un-checked.
• Filter_Angle
  Role: Attribute to display angles constraints
  Detailed role: Defines whether angles constraints are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the angles constraints are displayed
  • Values:

    0	Constraints are not displayed
    1	Constraints are displayed

• Filter_Chamfer
  Role: Attribute to display chamfer constraints
  Detailed role: Defines whether chamfer constraints are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the chamfer constraints are displayed
  • Values:

    0	Constraints are not displayed
    1	Constraints are displayed

• Filter_Coincidence
  Role: Attribute to display coincidence constraints
  Detailed role: Defines whether coincidence constraints are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the coincidence constraints are displayed
  • Values:

    0	Constraints are not displayed
    1	Constraints are displayed

• Filter_Concentric
  Role: Attribute to display concentricity constraints
  Detailed role: Defines whether concentricity constraints are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the concentricity constraints are displayed
  • Values:

    0	Constraints are not displayed
    1	Constraints are displayed

• Filter_Constrained
  Role: Attribute to display driving constraints
  Detailed role: Defines whether driving constraints are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the driving constraints are displayed
  • Values:

    0	Constraints are not displayed
    1	Constraints are displayed

• Filter_Distance
  Role: Attribute to display dimension constraints
  Detailed role: Defines whether dimension constraints are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the dimension constraints are displayed
  • Values:

    0	Constraints are not displayed
    1	Constraints are displayed

• Filter_Equality
  Role: Attribute to display equal constraints
  Detailed role: Defines whether equal constraints are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the equal constraints are displayed
  • Values:

    0	Constraints are not displayed
    1	Constraints are displayed

• Filter_FixedAngle
  Role: Attribute to display fixed angles constraints
  Detailed role: Defines whether fixed angles constraints are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the fixed angles constraints are displayed
  • Values:

    0	Constraints are not displayed
    1	Constraints are displayed

• Filter_Fixity
  Role: Attribute to display fix constraints
  Detailed role: Defines whether fix constraints are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the fix constraints are displayed
  • Values:

    0	Constraints are not displayed
    1	Constraints are displayed

• Filter_Measured
  Role: Attribute to display driven constraints
  Detailed role: Defines whether driven constraints are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the driven constraints are displayed
  • Values:

    0	Constraints are not displayed
    1	Constraints are displayed

• Filter_Tangency
  Role: Attribute to display tangency constraints
  Detailed role: Defines whether tangency constraints are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the tangency constraints are displayed
  • Values:

    0	Constraints are not displayed
    1	Constraints are displayed

• Gap
  Role: Attribute to define the distance between the constrained geometries and constraint extension lines
  Detailed role: Defines the distance between the constrained geometries and constraint extension lines, in mm.
  
  • Type: double
  • Default value: 2
  • Default Value Role: By default the view angle is 2 mm
• Hilite_pointed_elements
  Role: Attribute to highlight the constrained geometries
  Detailed role: Defines whether the constrained geometries are highlighted when you pre-select a constraint.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default the constrained geometries are highlighted
  • Values:

    0	The constrained geometries are not highlighted
    1	The constrained geometries are highlighted

• Overrun
  Role: Attribute to define the distance between the constraint dimension lines and constraint extension lines
  Detailed role: Defines the distance between the constraint dimension lines and constraint extension lines, in mm.
  
  • Type: double
  • Default value: 2
  • Default Value Role: By default the view angle is 2 mm
• Scale
  Role: Attribute to define the dimension style options
  Detailed role: Defines the size of the graphical symbols for iconic constraint.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default medium symbols are displayed
  • Values:

    0	Displays small symbols
    1	Displays medium symbols
    2	Displays large symbols

• Show_Color_Status
  Role: Attribute to display the status color
  Detailed role: Defines if the default status color or the graphical user defined color is displayed on constraint.
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default the default status color is used
  • Values:

    0	The graphical user defined color is used
    1	The Update command will be automatically launched

• Show_iconic_line
  Role: Attribute to display the iconified constrained elements
  Detailed role: Defines whether the iconified constrained elements are displayed.
  
  • Type: integer
  • Default value: 1
  • Default Value Role: By default iconified constrained elements are displayed
  • Values:

    0	Does not display iconified constrained elements
    1	Displays iconified constrained elements

• Status_geoinv
  Role: Invalid Geometry Constraints color in 3D viewer
  Detailed role: This attribute defines the color status for constraints set on a geometry became invalid in the 3D viewer. The three integer are the Red, Green, Blue coefficients
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default, the color is dark red
  • Min value: 0
  • Max value: 256
• Status_ko
  Role: Unresolved Constraints color in 3D viewer
  Detailed role: This attribute defines the color status for unresolved constraints in the 3D viewer. The three integer are the Red, Green, Blue coefficients
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default, the color is dark green
  • Min value: 0
  • Max value: 256
• Status_ok
  Role: Resolved Constraints color in 3D viewer
  Detailed role: This attribute defines the color status for resolved constraints in the 3D viewer. The three integer are the Red, Green, Blue coefficients
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default, the color is medium green
  • Min value: 0
  • Max value: 256
• Status_overcst
  Role: Overconstrained color in 3D viewer
  Detailed role: This attribute defines the color status for overconstrained in the 3D viewer. The three integer are the Red, Green, Blue coefficients
  
  • Type: integer
  • Default value: 217
  • Default Value Role: By default, the color is purple
  • Min value: 0
  • Max value: 256

Copyright © 1999-2019, Dassault Systèmes. All rights reserved.