AssemblyConstraints Setting Repository

AssemblyConstraints

Role: Setting to manage Assembly Design (Contraints) options

Detailed role: Assembly Design (Constraints) setting contains all options necessary to Assembly Design(Constraints) commands

The AssemblyConstraints repository has the following characteristics:

• Primary Tab Page: /Mechanical Design/Assembly Design/Constraints
• Repository File: Assembly
• Version: 1
• Full Compatibility: 1
• Upward Compatibility: 1

AssemblyConstraints setting repository attributes:

• CreateWithPublish
  Role: Constraint creation mode
  Detailed role: According to this attribute's value, constraints can be created on any geometry or only on published geometry
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default constraint can be created on any geometry
  • Values:

    0	The constraint can be created on any kind of geometry
    1	The constraint can only be created on geometry published on the direct child level
    2	The constraint can only be created on geometry published on any assembly level

• DetectedMode
  Role: Quick constraint mode
  Detailed role: This attribute is used by commands such as Quick Constraint, which create the most accurate constraint from the context. The priority order may be determined by a predefined list or by the constraints solver
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default constraint is created according to the specified order
  • Values:

    0	Use the specified order
    1	Create verified constraint first

• QuickConstraintOrderedList
  Role: Constraints ordered list for Quick constraints creation
  Detailed role: This attribute is the ordered list, used by commands such as Quick Constraint, and specifies the constraint creation priority. Note that this array of 6 values must not contain any duplicates
  
  • Type: string
  • Default value: CATAsmPerpendType
• ReconnectCstOnCCP
  Role: Reconnect constraints on cut/copy paste mode.
  Detailed role: This attribute determines the conditions under which constraints is copied and pasted.
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default constraints are never copied and pasted
  • Values:

    0	Constraints are not copied and pasted
    1	Constraints are copied and pasted only after a Copy
    2	Constraints are copied and pasted only after a Cut
    3	Constraints are always copied and pasted

• RedundantModeSet
  Role: Disable redundancy check mode.
  Detailed role: This attribute is used to control redundancy check when constraint is created
  
  • Type: integer
  • Default value: 0
  • Default Value Role: By default do redundancy check
  • Values:

    0	Do redundancy check
    1	Disable redundancy check

Copyright © 1999-2019, Dassault Systèmes. All rights reserved.